summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2024-06-26net: usb: qmi_wwan: add Telit FN912 compositionsDaniele Palmas
Add the following Telit FN912 compositions: 0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3000 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3001 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-24net: usb: ax88179_178a: improve link status logsJose Ignacio Tornos Martinez
Avoid spurious link status logs that may ultimately be wrong; for example, if the link is set to down with the cable plugged, then the cable is unplugged and after this the link is set to up, the last new log that is appearing is incorrectly telling that the link is up. In order to avoid errors, show link status logs after link_reset processing, and in order to avoid spurious as much as possible, only show the link loss when some link status change is detected. cc: stable@vger.kernel.org Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-20net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettingsOliver Neukum
This functions retrieves values by passing a pointer. As the function that retrieves them can fail before touching the pointers, the variables must be initialized. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-19net: usb: ax88179_178a: improve reset checkJose Ignacio Tornos Martinez
After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up") to not reset from usbnet_open after the reset from usbnet_probe at initialization stage to speed up this, some issues have been reported. It seems to happen that if the initialization is slower, and some time passes between the probe operation and the open operation, the second reset from open is necessary too to have the device working. The reason is that if there is no activity with the phy, this is "disconnected". In order to improve this, the solution is to detect when the phy is "disconnected", and we can use the phy status register for this. So we will only reset the device from reset operation in this situation, that is, only if necessary. The same bahavior is happening when the device is stopped (link set to down) and later is restarted (link set to up), so if the phy keeps working we only need to enable the mac again, but if enough time passes between the device stop and restart, reset is necessary, and we can detect the situation checking the phy status register too. cc: stable@vger.kernel.org # 6.6+ Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de> Reported-by: Arne Fitzenreiter <arne_f@ipfire.org> Tested-by: Yongqin Liu <yongqin.liu@linaro.org> Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-05-27net: usb: smsc95xx: fix changing LED_SEL bit value updated from EEPROMParthiban Veerasooran
LED Select (LED_SEL) bit in the LED General Purpose IO Configuration register is used to determine the functionality of external LED pins (Speed Indicator, Link and Activity Indicator, Full Duplex Link Indicator). The default value for this bit is 0 when no EEPROM is present. If a EEPROM is present, the default value is the value of the LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or Lite Reset (LRST) will cause this bit to be restored to the image value last loaded from EEPROM, or to be set to 0 if no EEPROM is present. While configuring the dual purpose GPIO/LED pins to LED outputs in the LED General Purpose IO Configuration register, the LED_SEL bit is changed as 0 and resulting the configured value from the EEPROM is cleared. The issue is fixed by using read-modify-write approach. Fixes: f293501c61c5 ("smsc95xx: configure LED outputs") Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Woojung Huh <woojung.huh@microchip.com> Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.10 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-13net: usb: ax88179_178a: fix link status when link is set to down/upJose Ignacio Tornos Martinez
The idea was to keep only one reset at initialization stage in order to reduce the total delay, or the reset from usbnet_probe or the reset from usbnet_open. I have seen that restarting from usbnet_probe is necessary to avoid doing too complex things. But when the link is set to down/up (for example to configure a different mac address) the link is not correctly recovered unless a reset is commanded from usbnet_open. So, detect the initialization stage (first call) to not reset from usbnet_open after the reset from usbnet_probe and after this stage, always reset from usbnet_open too (when the link needs to be rechecked). Apply to all the possible devices, the behavior now is going to be the same. cc: stable@vger.kernel.org # 6.6+ Fixes: 56f78615bcb1 ("net: usb: ax88179_178a: avoid writing the mac address before first reading") Reported-by: Isaac Ganoung <inventor500@vivaldi.net> Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240510090846.328201-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-10net: usb: smsc95xx: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") v3: also fix a sparse error ( https://lore.kernel.org/oe-kbuild-all/202405091310.KvncIecx-lkp@intel.com/ ) v2: leave the skb_trim() game because smsc95xx_rx_csum_offload() needs the csum part. (Jakub) While we are it, use get_unaligned() in smsc95xx_rx_csum_offload(). Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509083313.2113832-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: usb: sr9700: stop lying about skb->truesizeEric Dumazet
Some usb drivers set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: usb: smsc75xx: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Link: https://lore.kernel.org/r/20240506142358.3657918-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07usb: aqc111: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. I replace one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a: stop lying about skb->truesize") Fixes: 361459cd9642 ("net: usb: aqc111: Implement RX data path") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25r8152: replace dev_info with dev_dbg for loading firmwareHayes Wang
Someone complains the message appears continuously. This occurs because the device is woken from UPS mode, and the driver re-loads the firmware. When the device enters runtime suspend and cable is unplugged, the device would enter UPS mode. If the runtime resume occurs, and the device is woken from UPS mode, the driver has to re-load the firmware and causes the message. If someone wakes the device continuously, the message would be shown continuously, too. Use dev_dbg to avoid it. Note that, the function could be called before register_netdev(), so I don't use netif_info() or netif_dbg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20240424084532.159649-1-hayeswang@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25net: usb: ax88179_178a: Add check for usbnet_get_endpoints()Ma Ke
To avoid the failure of usbnet_get_endpoints(), we should check the return value of the usbnet_get_endpoints(). Signed-off-by: Ma Ke <make_ruc2021@163.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240424065634.1870027-1-make_ruc2021@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-23net: usb: ax88179_178a: stop lying about skb->truesizeEric Dumazet
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize overide. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize in rx path") Fixes: f8ebb3ac881b ("net: usb: ax88179_178a: Fix packet receiving") Reported-by: shironeko <shironeko@tesaguri.club> Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/ Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jose Alonso <joalonsof@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240421193828.1966195-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22net: usb: qmi_wwan: add Telit FN920C04 compositionsDaniele Palmas
Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/trace/events/rpcgss.h 386f4a737964 ("trace: events: cleanup deprecated strncpy uses") a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field") Adjacent changes: drivers/net/ethernet/intel/ice/ice_tc_lib.c 2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device") 784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18net: usb: ax88179_178a: avoid writing the mac address before first readingJose Ignacio Tornos Martinez
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset operation, in which the default mac address from the device is read, is not executed from bind operation and the random address, that is pregenerated just in case, is direclty written the first time in the device, so the default one from the device is not even read. This writing is not dangerous because is volatile and the default mac address is not missed. In order to avoid this and keep the simplification to have only one reset and reduce the delays, restore the reset from bind operation and remove the reset that is commanded from open operation. The behavior is the same but everything is ready for usbnet_probe. Tested with ASIX AX88179 USB Gigabit Ethernet devices. Restore the old behavior for the rest of possible devices because I don't have the hardware to test. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-17net:usb:qmi_wwan: support Rolling modulesVanillan Wang
Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang <vanillanwang@163.com> Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-17net: usb: qmi_wwan: add Lonsung U8300/U9300 productCoia Prant
Update the net usb qmi_wwan driver to support Longsung U8300/U9300. Enabling DTR on this modem was necessary to ensure stable operation. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up, to rebind it to qmi_wwan driver. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Free the interface up. The proper configuration is: Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Free the interface up, to rebind it to qmi_wwan driver. The proper configuration is: Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully using qmicli on U9300. Signed-off-by: Coia Prant <coiaprant@gmail.com> Link: https://lore.kernel.org/r/20240415142638.1756966-1-coiaprant@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net: usb: qmi_wwan: Remove generic .ndo_get_stats64Breno Leitao
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240409133307.2058099-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-11net: usb: qmi_wwan: Leverage core stats allocatorBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the qmi_wwan driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240409133307.2058099-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-08net: usb: lan78xx: Fixup EEEAndrew Lunn
The enabling/disabling of EEE in the MAC should happen as a result of auto negotiation. So move the enable/disable into lan783xx_phy_link_status_change() which gets called by phylib when there is a change in link status. lan78xx_set_eee() now just programs the hardware with the LPI timer value, and passed everything else to phylib, so it can correctly setup the PHY. lan743x_get_eee() relies on phylib doing most of the work, the MAC driver just adds the LPI timer value. Call phy_support_eee() to indicate the MAC does actually support EEE. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08net: usb: ax88179_178a: non necessary second random mac addressJose Ignacio Tornos Martinez
If the mac address can not be read from the device registers or the devicetree, a random address is generated, but this was already done from usbnet_probe, so it is not necessary to call eth_hw_addr_random from here again to generate another random address. Indeed, when reset was also executed from bind, generate another random mac address invalidated the check from usbnet_probe to configure if the assigned mac address for the interface was random or not, because it is comparing with the initial generated random address. Now, with only a reset from open operation, it is just a harmless simplification. Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-04net: usb: ax88179_178a: avoid the interface always configured as random addressJose Ignacio Tornos Martinez
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset is not executed from bind operation and mac address is not read from the device registers or the devicetree at that moment. Since the check to configure if the assigned mac address is random or not for the interface, happens after the bind operation from usbnet_probe, the interface keeps configured as random address, although the address is correctly read and set during open operation (the only reset now). In order to keep only one reset for the device and to avoid the interface always configured as random address, after reset, configure correctly the suitable field from the driver, if the mac address is read successfully from the device registers or the devicetree. Take into account if a locally administered address (random) was previously stored. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.9 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-11r8152: fix unknown device for choose_configurationHayes Wang
For the unknown device, rtl8152_cfgselector_choose_configuration() should return a negative value. Then, usb_choose_configuration() would set a configuration for CDC ECM or NCM mode. Otherwise, there is no usb interface driver for the device. Fixes: aa4f2b3e418e ("r8152: Choose our USB config with choose_configuration() rather than probe()") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20240308075206.33553-436-nic_swsd@realtek.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07net: usbnet: Remove generic .ndo_get_stats64Breno Leitao
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is configured") moved the callback to dev_get_tstats64() to net core, so, unless the driver is doing some custom stats collection, it does not need to set .ndo_get_stats64. Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64 function pointer. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240306142643.2429409-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07net: usbnet: Leverage core stats allocatorBreno Leitao
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and convert veth & vrf"), stats allocation could be done on net core instead of in this driver. With this new approach, the driver doesn't have to bother with error handling (allocation failure checking, making sure free happens in the right spot, etc). This is core responsibility now. Remove the allocation in the usbnet driver and leverage the network core allocation instead. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240306142643.2429409-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06sr9800: Add check for usbnet_get_endpointsChen Ni
Add check for usbnet_get_endpoints() and return the error if it fails in order to transfer the error. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Simon Horman <horms@kernel.org> Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-01ipv6: annotate data-races around cnf.forwardingEric Dumazet
idev->cnf.forwarding and net->ipv6.devconf_all->forwarding might be read locklessly, add appropriate READ_ONCE() and WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01net: lan78xx: fix runtime PM count underflow on link stopOleksij Rempel
Current driver has some asymmetry in the runtime PM calls. On lan78xx_open() it will call usb_autopm_get() and unconditionally usb_autopm_put(). And on lan78xx_stop() it will call only usb_autopm_put(). So far, it was working only because this driver do not activate autosuspend by default, so it was visible only by warning "Runtime PM usage count underflow!". Since, with current driver, we can't use runtime PM with active link, execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise, keep ref counting high as long as interface is open. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28net: usb: ax88179_178a: Use linkmode helpers for EEEAndrew Lunn
Make use of the existing linkmode helpers for converting PHY EEE register values into links modes, now that ethtool_keee uses link modes, rather than u32 values. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-28net: usb: r8152: Use linkmode helpers for EEEAndrew Lunn
Make use of the existing linkmode helpers for converting PHY EEE register values into links modes, now that ethtool_keee uses link modes, rather than u32 values. Rework determining if EEE is active to make is similar as to how phylib decides, and make use of a phylib helper to validate if EEE is valid in for the current link mode. This then requires that PHYLIB is selected. Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-27net: lan78xx: fix "softirq work is pending" errorOleksij Rempel
Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #08!!! Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240226110820.2113584-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-27net: usb: dm9601: fix wrong return value in dm9601_mdio_readJavier Carrasco
The MII code does not check the return value of mdio_read (among others), and therefore no error code should be sent. A previous fix to the use of an uninitialized variable propagates negative error codes, that might lead to wrong operations by the MII library. An example of such issues is the use of mii_nway_restart by the dm9601 driver. The mii_nway_restart function does not check the value returned by mdio_read, which in this case might be a negative number which could contain the exact bit the function checks (BMCR_ANENABLE = 0x1000). Return zero in case of error, as it is common practice in users of mdio_read to avoid wrong uses of the return value. Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Peter Korsgaard <peter@korsgaard.com> Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26lan78xx: enable auto speed configuration for LAN7850 if no EEPROM is detectedOleksij Rempel
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not present or not flashed, LAN7850 will fail to sync the speed detected by the PHY with the MAC. In case link speed is 100Mbit, it will accidentally work, otherwise no data can be transferred. Better way would be to implement link_up callback, or set auto speed configuration unconditionally. But this changes would be more intrusive. So, for now, set it only if no EEPROM is found. Fixes: e69647a19c87 ("lan78xx: Set ASD in MAC_CR when EEE is enabled.") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-22net: smsc95xx: add support for SYS TEC USB-SPEmodule1Andre Werner
This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L ethernet device to the existing smsc95xx driver by adding the new USB VID/PID pair. Signed-off-by: Andre Werner <andre.werner@systec-electronic.com> Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21net: hso: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the hso_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21net: usbnet: constify the struct device_type usageRicardo B. Marliere
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver core can properly handle constant struct device_type. Move the wlan_type and wwan_type variables to be constant structures as well, placing it into read-only memory which can not be modified at runtime. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: add suffix _u32 to legacy bitmap members of struct ethtool_keeeHeiner Kallweit
This is in preparation of using the existing names for linkmode bitmaps. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-31ethtool: replace struct ethtool_eee with a new struct ethtool_keee on kernel ↵Heiner Kallweit
side In order to pass EEE link modes beyond bit 32 to userspace we have to complement the 32 bit bitmaps in struct ethtool_eee with linkmode bitmaps. Therefore, similar to ethtool_link_settings and ethtool_link_ksettings, add a struct ethtool_keee. In a first step it's an identical copy of ethtool_eee. This patch simply does a s/ethtool_eee/ethtool_keee/g for all users. No functional change intended. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-18Merge tag 'usb-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.8-rc1. Included in here are the following: - Thunderbolt subsystem and driver updates for USB 4 hardware and issues reported by real devices - xhci driver updates - dwc3 driver updates - uvc_video gadget driver updates - typec driver updates - gadget string functions cleaned up - other small changes All of these have been in the linux-next tree for a while with no reported issues" * tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) usb: typec: tipd: fix use of device-specific init function usb: typec: tipd: Separate reset for TPS6598x usb: mon: Fix atomicity violation in mon_bin_vma_fault usb: gadget: uvc: Remove nested locking usb: gadget: uvc: Fix use are free during STREAMOFF usb: typec: class: fix typec_altmode_put_partner to put plugs dt-bindings: usb: dwc3: Limit num-hc-interrupters definition dt-bindings: usb: xhci: Add num-hc-interrupters definition xhci: add support to allocate several interrupters USB: core: Use device_driver directly in struct usb_driver and usb_device_driver arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue arm64: dts: qcom: msm8996: Remove PNoC clock from MSS arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI arm64: dts: qcom: msm8939: Drop RPM bus clocks arm64: dts: qcom: sdm630: Drop RPM bus clocks arm64: dts: qcom: qcs404: Drop RPM bus clocks arm64: dts: qcom: msm8996: Drop RPM bus clocks ...
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2024-01-08lan78xx: remove redundant statement in lan78xx_get_eeeHeiner Kallweit
eee_active is set by phy_ethtool_get_eee() already, using the same logic plus an additional check against link speed/duplex values. See genphy_c45_eee_is_active() for details. So we can remove this line. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b086b296-0a1b-42d4-8e2b-ef6682598185@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Merge tag 'net-6.7-rc9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. We haven't accumulated much over the break. If it wasn't for the uninterrupted stream of fixes for Intel drivers this PR would be very slim. There was a handful of user reports, however, either they stood out because of the lower traffic or users have had more time to test over the break. The ones which are v6.7-relevant should be wrapped up. Current release - regressions: - Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum required", it caused issues on networks where routers send prefixes with preferred_lft=0 - wifi: - iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock - mac80211: fix re-adding debugfs entries during reconfiguration Current release - new code bugs: - tcp: print AO/MD5 messages only if there are any keys Previous releases - regressions: - virtio_net: fix missing dma unmap for resize, prevent OOM Previous releases - always broken: - mptcp: prevent tcp diag from closing listener subflows - nf_tables: - set transport header offset for egress hook, fix IPv4 mangling - skip set commit for deleted/destroyed sets, avoid double deactivation - nat: make sure action is set for all ct states, fix openvswitch matching on ICMP packets in related state - eth: mlxbf_gige: fix receive hang under heavy traffic - eth: r8169: fix PCI error on system resume for RTL8168FP - net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling" * tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net/tcp: Only produce AO/MD5 logs if there are any keys net: Implement missing SO_TIMESTAMPING_NEW cmsg support bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters() net: ravb: Wait for operating mode to be applied asix: Add check for usbnet_get_endpoints octeontx2-af: Re-enable MAC TX in otx2_stop processing octeontx2-af: Always configure NIX TX link credits based on max frame size net/smc: fix invalid link access in dumping SMC-R connections net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues virtio_net: fix missing dma unmap for resize igc: Fix hicredit calculation ice: fix Get link status data length i40e: Restore VF MSI-X state during PCI reset i40e: fix use-after-free in i40e_aqc_add_filters() net: Save and restore msg_namelen in sock_sendmsg netfilter: nft_immediate: drop chain reference counter on error netfilter: nf_nat: fix action not being set for all ct states net: bcmgenet: Fix FCS generation for fragmented skbuffs mptcp: prevent tcp diag from closing listener subflows MAINTAINERS: add Geliang as reviewer for MPTCP ...
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-15 12:47:45 +0000