summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath10k/mac.c
AgeCommit message (Collapse)Author
2015-10-21Merge ath-next from ath.gitKalle Valo
Major changes: ath10k * add board 2 API support for automatically choosing correct board file * data path optimisations * disable PCI power save for qca988x and QCA99x0 due to interop reasons wil6210 * BlockAckReq support * firmware crashdump using devcoredump * capture all frames with sniffer
2015-10-14ath10k: cleanup ath10k_mac_register() error handlingJeff Johnson
The logic in the error-handling path of ath10k_mac_register() is divergent from the logic in ath10k_mac_unregister(). Update the ath10k_mac_register() error handling logic to align with the ath10k_mac_unregister() logic. Signed-off-by: Jeff Johnson <jjohnson@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-12Merge tag 'wireless-drivers-next-for-davem-2015-10-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: iwlwifi * some debugfs improvements * fix signedness in beacon statistics * deinline some functions to reduce size when device tracing is enabled * filter beacons out in AP mode when no stations are associated * deprecate firmwares version -12 * fix a runtime PM vs. legacy suspend race * one-liner fix for a ToF bug * clean-ups in the rx code * small debugging improvement * fix WoWLAN with new firmware versions * more clean-ups towards multiple RX queues; * some rate scaling fixes and improvements; * some time-of-flight fixes; * other generic improvements and clean-ups; brcmfmac * rework code dealing with multiple interfaces * allow logging firmware console using debug level * support for BCM4350, BCM4365, and BCM4366 PCIE devices * fixed for legacy P2P and P2P device handling * correct set and get tx-power ath9k * add support for Outside Context of a BSS (OCB) mode mwifiex * add USB multichannel feature ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-09ath10k: use station's current operating mode from assoc requestVivek Natarajan
The current number of spatial streams used by the client is advertised as a separate IE in assoc request. Use this information to set the NSS operating mode. Fixes: 45c9abc059fa ("ath10k: implement more versatile set_bitrate_mask"). Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-06ath10k: split an unnecessary long lineKalle Valo
from checkpatch: drivers/net/wireless/ath/ath10k/mac.c:1113: line over 90 characters Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-06ath10k: fix whitespace usageKalle Valo
checkpatch found: drivers/net/wireless/ath/ath10k/core.c:574: Blank lines aren't necessary before a close brace '}' drivers/net/wireless/ath/ath10k/mac.c:4067: Missing a blank line after declarations drivers/net/wireless/ath/ath10k/mac.c:4083: Missing a blank line after declarations drivers/net/wireless/ath/ath10k/mac.c:4084: spaces required around that '>>=' (ctx:WxV) drivers/net/wireless/ath/ath10k/pci.c:1507: Missing a blank line after declarations Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-06ath10k: brace style fixesKalle Valo
drivers/net/wireless/ath/ath10k/htt_tx.c:457: braces {} are not necessary for single statement blocks drivers/net/wireless/ath/ath10k/htt_tx.c:545: braces {} are not necessary for single statement blocks drivers/net/wireless/ath/ath10k/mac.c:200: braces {} are not necessary for single statement blocks Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-06ath10k: indentation fixesKalle Valo
checkpatch found: drivers/net/wireless/ath/ath10k/core.c:513: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/core.c:1266: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/core.c:1267: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/core.c:1268: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/core.c:1269: code indent should use tabs where possible drivers/net/wireless/ath/ath10k/mac.c:4659: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/mac.c:6271: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/pci.c:2260: Alignment should match open parenthesis drivers/net/wireless/ath/ath10k/wmi.c:3510: Alignment should match open parenthesis Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-27ath10k: fix ldpc param for fixed rateRajkumar Manoharan
ldpc is not configured for fixed rates. This blocks auto rate vs fixed rate performance comparison. Since firmware is considering ldpc vdev param for fixed rate selection, it has to be configured to enable ldpc for fixed rates. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-17ath10k: handle IEEE80211_CHANCTX_CHANGE_WIDTH properlyMichal Kazior
Vdevs associated with a given chanctx should be restarted if the bandwidth changes. Otherwise traffic may cease. This is known to fix STA CSA with bandwidths wider than 20MHz. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17ath10k: split switch_vif_chanctx gutsMichal Kazior
This is necessary to make vdev restarting logic reusable later. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17ath10k: move hw_scan worker queuingMichal Kazior
The remain_on_channel callback needs different timeout. Calling ieee80211_queue_work() with a shorter delay after calling it with a longer delay will not change the timer. This caused the offchannel timeout worker to not trigger in time and caused the device to stay on channel longer then expected. This could cause some problems and was be easily reproduced with `iw offchannel` command. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17ath10k: implement mesh supportBob Copeland
Add support for mesh to ath10k. We simply use an AP virtual interface in the firmware in order to enable beaconing without TSF adoption, and use the raw (802.11) transmit mode. Due to firmware limitations, the firmware must operate in raw (non-native 802.11) mode. As this is configured at firmware init time, a new "rawmode" modparam is added, and mesh interfaces are available only if rawmode=true. The firmware must advertise support for rawmode; tested successfully with firmware 10.2.4.70.6-2. When the module is loaded with (newly implemented) modparam rawmode=1, it will enable operating an open mesh STA via something like the following: ip link set wlan0 down iw dev wlan0 set type mp ip link set wlan0 up iw dev wlan0 set freq 5745 80 5775 iw dev wlan0 mesh join mesh-vht Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17ath10k: enable monitor when OTHER_BSS requestedBob Copeland
By default, ath10k restricts received frames to those matching BSSID. When other BSS frames are requested (e.g. in mesh mode), add an internal monitor device so those frames are not filtered. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-09ath10k: fix beamformer VHT sounding dimensions capabilityBartosz Markowski
Similarly to the VHT STS, this is supposed to be propagated by firmware. In case it's not, use the default value, but as last resort. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-09ath10k: fix beamformee VHT STS capabilityBartosz Markowski
The VHT STS CAP shall be reported by firmware to host, like in case of QCA99x0. For QCA6174 hw family this isn't set for some reason. So for this particular chips, let's assume it has the ability to support VHT NDP in up to 4 STSs (which is true by the way). Change the published beamformee STS cap accordingly to 3 or to what the firmware reports. Assumption so far, it suppose to be the num_rf_chains-1, was completely wrong. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-26ath10k: add missing mutex unlock on failpathMichal Kazior
Kernel would complain about leaving a held lock after going back to userspace and would subsequently deadlock. Fixes: e04cafbc38c7 ("ath10k: fix peer limit enforcement") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-17ath10k: split ap/ibss wep key install processMichal Kazior
Apparently it's not safe to install both pairwise and groupwise keys on AP vdevs as it can cause traffic to stop working in some multi-vif (WPA+WEP) cases. Fixes: ce90b27128c2 ("ath10k: fix multiple key static wep with ibss") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-17ath10k: wake up queue upon vif creationMichal Kazior
Vif's vdev_id is used as queue number. However due to the tx pausing design in ath10k it was possible for a new interface to be created with its tx queue stopped (via ieee80211_stop_queues). This could in turn leave the interface inoperable until ath10k_mac_tx_unlock() was called. This problem only affected multi-vif scenarios when new interfaces were created some time later after other interfaces have been running for some time and had Tx queue full at some point prior. Possible manifestation of the bug was authentication timeout for a client vif. Fixes: 96d828d45e16 ("ath10k: rework tx queue locking") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-17ath10k: wake up offchannel queue properlyMichal Kazior
Once HTT Tx queue got full offchannel queue was stopped and never woken up again. This broke, e.g. P2P. This could be reproduced after running a lot of traffic enough to saturate 100% of the driver Tx queue and then trying to send offchannel traffic. Fixes: 96d828d45e16 ("ath10k: rework tx queue locking") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-13ath10k: fix peer limit enforcementMichal Kazior
Firmware peer entries are involved in internal firmware vdev structures. This was not accounted for and could lead firmware to crash due to asking it to do more than it could. Fixes: 039a0051ec1a ("ath10k: allocate fw resources for iface combinations") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-13ath10k: don't remove peer that doesn't existMichal Kazior
If peer creation failed during offchannel Tx the driver attempted to delete the peer nonetheless. This caused the ar->num_peers counter to be incorrectly decremented. This subsequently could cause the counter to drop below 0 and also eventually lead to firmware crash because host would think there are less peer entries created in firmware then there really were. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-13ath10k: Enable MU MIMO txbf support for QCA99X0Vivek Natarajan
This patch enables MU-MIMO transmit beamforming support for QCA99X0 chipsets. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-13ath10k: Support different txbf configuration schemesVivek Natarajan
qca61x4 uses the vdev param as a sole sufficient configuration for txbf while qca99x0 enables txbf during peer assoc by combining the vdev param value with peer assoc's vht capabilities This patch gets the appropriate txbf configuration scheme before passing the wmi command to enable the same in the firmware. Signed-off-by: Vivek Natarajan <nataraja@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-13ath10k: reject 11b tx fragmentation configurationMichal Kazior
Even though there's a WMI enum for fragmentation threshold no known firmware actually implements it. Moreover it is not possible to rely frame fragmentation to mac80211 because firmware clears the "more fragments" bit in frame control making it impossible for remote devices to reassemble frames. Hence implement a dummy callback just to say fragmentation isn't supported. This effectively prevents mac80211 from doing frame fragmentation in software. This fixes Tx becoming broken after setting fragmentation threshold. Fixes: 1010ba4c5d1c ("ath10k: unregister and remove frag_threshold callback") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-08-13ath10k: remove futile fragmentation threshold configMichal Kazior
Commit 1010ba4c5d1c ("ath10k: unregister and remove frag_threshold callback") didn't remove all instances of (futile) fragmentation threshold configuration. No known firmware supports the parameter so don't even bother setting it. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-29ath10k: enable raw encap mode and software crypto engineDavid Liu
This patch enables raw Rx/Tx encap mode to support software based crypto engine. This patch introduces a new module param 'cryptmode'. cryptmode: 0: Use hardware crypto engine globally with native Wi-Fi mode TX/RX encapsulation to the firmware. This is the default mode. 1: Use sofware crypto engine globally with raw mode TX/RX encapsulation to the firmware. Known limitation: A-MSDU must be disabled for RAW Tx encap mode to perform well when heavy traffic is applied. Testing: (by Michal Kazior <michal.kazior@tieto.com>) a) Performance Testing cryptmode=1 ap=qca988x sta=killer1525 killer1525 -> qca988x 194.496 mbps [tcp1 ip4] killer1525 -> qca988x 238.309 mbps [tcp5 ip4] killer1525 -> qca988x 266.958 mbps [udp1 ip4] killer1525 -> qca988x 477.468 mbps [udp5 ip4] qca988x -> killer1525 301.378 mbps [tcp1 ip4] qca988x -> killer1525 297.949 mbps [tcp5 ip4] qca988x -> killer1525 331.351 mbps [udp1 ip4] qca988x -> killer1525 371.528 mbps [udp5 ip4] ap=killer1525 sta=qca988x qca988x -> killer1525 331.447 mbps [tcp1 ip4] qca988x -> killer1525 328.783 mbps [tcp5 ip4] qca988x -> killer1525 375.309 mbps [udp1 ip4] qca988x -> killer1525 403.379 mbps [udp5 ip4] killer1525 -> qca988x 203.689 mbps [tcp1 ip4] killer1525 -> qca988x 222.339 mbps [tcp5 ip4] killer1525 -> qca988x 264.199 mbps [udp1 ip4] killer1525 -> qca988x 479.371 mbps [udp5 ip4] Note: - only open network tested for RAW vs nwifi performance comparison - killer1525 (qca6174 hw2.2) is 2x2 device (hence max 866mbps) - used iperf - OTA, devices a few cm apart from each other, no shielding - tcpX/udpX, X - means number of threads used Overview: - relative Tx performance drop is seen but is within reasonable and expected threshold (A-MSDU must be disabled with RAW Tx) b) Connectivity Testing cryptmode=1 ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br OK ap=iwl6205 sta1=qca988x crypto=open topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wep1 topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa topology-1ap1sta2br1vlan OK ap=iwl6205 sta1=qca988x crypto=wpa-ccmp topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=open topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wep1 topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa topology-1ap1sta2br1vlan OK ap=qca988x sta1=iwl6205 crypto=wpa-ccmp topology-1ap1sta2br1vlan OK Note: - each test takes all possible endpoint pairs and pings - each pair-ping flushes arp table - ip6 is used c) Testbed Topology: 1ap1sta: [ap] ---- [sta] endpoints: ap, sta 1ap1sta2br: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] endpoints: veth0, veth2, br0, br1 note: STA works in 4addr mode, AP has wds_sta=1 1ap1sta2br1vlan: [veth0] [ap] ---- [sta] [veth2] | | | | [veth1] | \ [veth3] \ / \ / [br0] [br1] | | [vlan0_id2] [vlan1_id2] endpoints: vlan0_id2, vlan1_id2 note: STA works in 4addr mode, AP has wds_sta=1 Credits: Thanks to Michal Kazior <michal.kazior@tieto.com> who helped find the amsdu issue, contributed a workaround (already squashed into this patch), and contributed the throughput and connectivity tests results. Signed-off-by: David Liu <cfliu.tw@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Tested-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-24ath10k: fix wrong initialization of struct channelManinder Singh
chandef is initialized with NULL and on the very next line, we are using it to get channel, which is not correct. Channel should be initialized after obtaining chandef. Found by cppcheck: ath/ath10k/mac.c:839]: (error) Possible null pointer dereference: chandef Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-21Merge ath-next from ath.git.Kalle Valo
Major changes in ath10k: * enable VHT for IBSS * initial work to support qca99x0 and the corresponding 10.4 firmware branch
2015-07-11ath10k: tweak interface combinationsMichal Kazior
Concurrent AP/GO operation on different channels isn't really supported well by the firmware so it's better to remove it from being advertised. Also tune the way station and p2p client interface limits are expressed to allow station + 2x p2p client or station + p2p client + p2p go. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix per-vif queue lockingMichal Kazior
Whenever any vdev was supposed to be paused all Tx queues were stopped (except offchannel) instead of only these associated with the given vdev. This caused subtle issues with multi-channel/multi-vif scenarios, e.g. authentication of station vif could sometimes fail depending on fw tx pause request timing. Fixes: b4aa539dd8f2 ("ath10k: implement tx pause wmi event") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: update vdev ps state on startMichal Kazior
Psmode can be forcefully enabled when vdev isn't started. It isn't guaranteed that mac80211 will re-issue psmode setting after vdev is started unless actual bss_conf.ps value has changed. Even if this doesn't fix any problems now it may prevent future breakage. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: fix hw roc expiration notifcationMichal Kazior
The expiration function must not be called when roc is explicitly cancelled by mac80211. However since fcf9844636be ("ath10k: fix hw roc expiration") the notification was never sent when roc actually expired. This fixes some P2P connection setup issues. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: limit multi-vif ps more aggresivellyMichal Kazior
Further testing proved that multi-channel AP+STA on QCA6174 with RM.2.0-00088 should have powersave force-disabled to avoid beacon misses/skipping on either side which in turn could disrupt communication. Since AP never has arvif->ps don't even bother checking it. Other combinations may be broken as well so disallow powersave with multivif outright unless firmware advertises otherwise. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-11ath10k: don't set cck/ofdm scan flagsMichal Kazior
mac80211 already does provide complete IEs for Probe Requests for hw scan and ath10k firmware was appending duplicate Supported Rates IEs unnecessarily. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-07-02ath10k: advertise 10.4 fw ap and sta iface combination to mac80211Raja Mani
10.4 fw supports upto 16 interface in ap mode and 1 interface in station mode, overall total interfaces supported are 16 interfaces. Populate this limit in wiphy->iface_combinations. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-30ath10k: include new wmi op version for 10.4 fwRaja Mani
qca99X0 chip uses firmware version 10.4. Define a new macro ATH10K_FW_WMI_OP_VERSION_10_4 for 10.4 firmware and include in switch cases where ATH10K_FW_WMI_OP_VERSION_* is used to avoid compilation error. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-23Merge tag 'wireless-drivers-next-for-davem-2015-06-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== Major changes: mwifiex: * enhancements for AP mode: support verbose information in station dump command and also information about AP link. * enable power save by default brcmfmac: * fix module reload issue for PCIe * improving msgbuf protocol for PCIe devices * rework .get_station() cfg80211 callback operation * determine interface combinations upon device feature support ath9k: * ath9k_htc: add support of channel switch wil6210: * add modparam for bcast ring size * support hidden SSID * add per-MCS Rx stats ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-16ath10k: mac: remove unreachable negative return checkNicholas Mc Guire
wait_event_timeout(), introduced in 'commit 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")' never returns < 0 so the only failure condition to be checked is ==0 (timeout). Further the return type is long not int - an appropriately named variable is added and the assignments fixed up. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-16ath10k: enable VHT for IBSSJanusz Dziedzic
Enable VHT support for IBSS, while mac80211/cfg80211 and wpa_supplicant already support this. In my test env, qca988x 2x2 I get: (udp) ath10k-1 >>>> ath10k-2 (server) - speed: 419 Mbits/sec (tcp) ath10k-1 >>>> ath10k-2 (server) - speed: 404 Mbits/sec During tests I used wpa_supplicant (latest git version), which already support IBSS VHT, and choose highest available BW. Also tested with qca6174. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09ath10k: fix channel switchingMichal Kazior
In the midst of chanctx patch review channel switching became broken which I failed to notice until now. Function ath10k_mac_vif_chan() reports current chandef which isn't updated until after switch_vif_chanctx() is returned from. Consequently the driver just restarted operation on channels it was residing already instead of switching to the new ones. Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09ath10k: remove ath10k_chanctx structMichal Kazior
In practice there's no point in having a copy of chanctx_conf. Most of the time the channel pointer (and band along with it) is accessed and this can't change after a chanctx is created because switching is done using explicit chanctx swapping via switch_vif_chanctx(). The only thing that can change within a chanctx_conf and is used by the driver is radar_enabled and channel width. These are however always accessed in adequate mac80211 callback context which guarantees safe access to the chanctx data. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-06-09ath10k: fix ar->rx_channel updating logicMichal Kazior
Channel contexts aren't iterable until after they've been added to the driver. The code assumed otherwise. This problem could result in: * rx_channel being NULL and forcing Rx path to go the slow way to get channel on QCA988X, * report incorrect channel when running multi-channel on QCA61X4 hw2.1, * report incorrect channel after AP channel switch. Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-05-25Merge ath-next from ath.gitKalle Valo
Major changes: ath10k: * qca6174 power consumption improvements, enable ASPM etc (Michal) wil6210: * support Wi-Fi Simple Configuration in STA mode
2015-05-24Merge tag 'wireless-drivers-next-for-davem-2015-05-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware ath9k: * spectral scan: add support for multiple FFT frames per report iwlwifi: * major rework of the scan code (Luca) * some work on the thermal code (Chaya Rachel) * some work on the firwmare debugging infrastructure brcmfmac: * SDIO suspend and resume fixes * wiphy band info and changes in regulatory settings * add support for BCM4324 SDIO and BCM4358 PCIe * enable support of PCIe devices on router platforms (Hante) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-22ath10k: fix idle power consumptionJanusz Dziedzic
mac80211 can update vif powersave state while disconnected. Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. Hence force-enable PS for non-running vdevs. This reduces power drain on QCA61X4 from 88mA to 36mA when interface is up and not associated. QCA988X wasn't measured. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-04-28Merge ath-next from ath.gitKalle Valo
Major changes in ath10k: * enable channel 144 on 5 GHz * enable Adaptive Noise Immunity (ANI) by default * add Wake on Wireless LAN (WOW) patterns support * add basic Tunneled Direct Link Setup (TDLS) support * add multi-channel support for QCA6174 * enable IBSS RSN support * enable Bluetooth Coexistance whenever firmware supports it * add more versatile way to set bitrates used by the firmware
2015-04-27ath10k: implement more versatile set_bitrate_maskMichal Kazior
Until now only a single fixed tx rate or nss was allowed to be set. The patch attempts to improve this by allowing most bitrate masks. The limitation is VHT MCS rates cannot be expressed separately using existing firmware interfaces and only the following VHT MCS ranges are supported: none, 0-7, 0-8, and 0-9. This keeps the old behaviour when requesting single tx rate or single nss. The new bitrate mask logic is only applied to other cases that would return -EINVAL until now. Depending on firmware revisions some combinations may crash firmware so use with care, please. This depends on "ath10k: don't use reassoc flag". Without it key cache would effectively be invalidated upon bitrate change leading to communication being no longer possible. These work: iw wlan0 set bitrates legacy-5 6 12 ht-mcs-5 1 2 3 iw wlan0 set bitrates legacy-5 ht-mcs-5 7 8 9 iw wlan0 set bitrates legacy-5 24 ht-mcs-5 vht-mcs-5 1:0-9 These won't work: iw wlan0 set bitrates legacy-5 ht-mcs-5 vht-mcs-5 1:0-5 iw wlan0 set bitrates vht-mcs-5 2:7-9 (note the invalid VHT MCS ranges) Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-14 13:36:57 +0000