summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/mac.c
AgeCommit message (Collapse)Author
2024-02-02wifi: ath12k: fix firmware assert during insmod in memory segment modeAaradhana Sahu
In segment memory mode, firmware allocates memory segments of size 2 MB. This 2 MB memory is used by firmware for the number of peers. This number of peer is sent from host to firmware during WMI init command. For single-phy the number of peers sent is TARGET_NUM_PEERS_SINGLE = 529 (512 + 17). While for split-phy number of peers sent to firmware is TARGET_NUM_PEERS_DBS = 2 *(512 + 17) = 1058. With this 1058 number of peers firmware is unable to allocate memory in 2 MB segment and firmware crash is observed. Hence, fix this firmware crash by reducing the number of stations TARGET_NUM_STATIONS for split-phy. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-7-quic_rajkbhag@quicinc.com
2024-02-02wifi: ath12k: indicate NON MBSSID vdev by default during vdev startSriram R
When any VDEV is started, MBSSID flags are passed to firmware to indicate if its a MBSSID/EMA AP vdev. If the interface is not an AP or if the AP doesn't support MBSSID, the vdev needs to be brought up as a non MBSSID vdev. Set these flags as a non MBSSID AP by default which can be updated as and when MBSSID support is added in ath12k. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240129065724.2310207-2-quic_rajkbhag@quicinc.com
2024-01-24wifi: ath12k: Fix issues in channel list updateSriram R
Currently, the logic used to select the 6 GHz band is incorrect, which may cause 6 GHz supported channels to not be updated properly. This is because the 6 GHz Max frequency supported by the driver is being compared to the Max frequency supported on the board. If in some cases, the 6 GHz Max frequency supported on the board is less than the defined 6 GHz Max frequency, all 6 GHz channels are disabled. To address this, compare the max frequency supported by the board to the defined 6 GHz Minimum frequency by the driver. Similarly, when a dual mac card supports both 6 GHz and 5 GHz radios, if the 5 GHz radio gets enumerated first before 6 GHz, the checks in ath12k_mac_setup_channels_rates() can cause the 5 GHz channels which were enabled earlier to get disabled when the 6 GHz channel list is updated. This is because the Min 6 GHz frequency defined in the driver is 5945 MHz, which should be 5925 MHz since channel 2 is not considered currently, but the firmware can pass 5925 MHz as the minimum. Hence, update the Min frequency supported by the driver to 5925 MHz. In addition, ensure that the channel list update to firmware updates only the channels that the current radio (ar) supports rather than considering the wiphy support. This would be required when multiple pdevs are supported in a wiphy and they support different ranges of frequencies or bands as in single wiphy support. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240117062628.8260-1-quic_srirrama@quicinc.com
2024-01-19wifi: ath12k: Introduce the container for mac80211 hwKarthikeyan Periyasamy
To support multi link operation, we need to combine all the link/pdev under a single wiphy. This avoids the overhead of synchronization across multiple hardware instances in both the cfg80211 and mac80211 layers. Currently, each link/pdev is registered as separate wiphy, tightly coupled with link/pdev/radio (ar) structure. To enable single wiphy registration within the chip, we decouple the wiphy data entity from the link/pdev/radio (ar) structure and move it under the chip (ab) structure with a new data container (ath12k_hw) structure. This approach improves scalability for future multi link operation support. mac80211 hw private data structure diagram ------------------------------------------ Now After +---------------------+ +---------------------+ |mac80211 hw priv data| |mac80211 hw priv data| | | | | | | | | | | | | | | | ath12k_hw (ah) | | | | | | | +-------------------> | | | ath12k (ar) | | +-------------+ | | | | | | | | | | | ath12k (ar) | | | | | | | | | | | | | | | | | +-------------+ | | | | | | | | | +---------------------+ +---------------------+ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240118010320.3918136-3-quic_periyasa@quicinc.com
2024-01-19wifi: ath12k: Refactor the mac80211 hw access from link/radioKarthikeyan Periyasamy
Currently, mac80211 hardware accesses link/radio structure directly in multiple locations. Introduce helper function to avoid this direct access, as this change will facilitate refactoring for Multi-link operation support. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240118010320.3918136-2-quic_periyasa@quicinc.com
2024-01-18wifi: ath12k: add support for BA1024Baochen Qiang
Currently the maximum block ACK window size supported is 256. This results in that, when connected to an AP which supports larger BA sizes like BA512 or BA1024, only BA256 is established, leading to a lower peak throughput. So add support for BA1024, this is done by allocating a larger REO queue and advertising IEEE80211_MAX_AMPDU_BUF_EHT support to MAC80211. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231129020414.56425-3-quic_bqiang@quicinc.com
2024-01-18wifi: ath12k: replace ENOTSUPP with EOPNOTSUPPKarthikeyan Periyasamy
ENOTSUPP is not a standard error code, don't use it. Replace with EOPNOTSUPP instead. No functional changes, compile tested only. Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240117080431.2907471-2-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: ath12k_start_vdev_delay(): convert to use arKarthikeyan Periyasamy
To support single wiphy abstraction, remove the mac80211 hw data dependency from the start vdev delay function. This way, this function can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-11-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_flush()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback flush(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-10-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_ampdu_action()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback ampdu_action(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-9-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_configure_filter()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback configure_filter(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-8-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_update_vif_offload()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback update_vif_offload(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-7-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_stop()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback stop(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-6-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_start()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback start(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-5-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_conf_tx()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback conf_tx(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-4-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_bss_assoc()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback bss_info_change(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-3-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_op_config()Karthikeyan Periyasamy
To support single wiphy abstraction, introduce link/radio specific helper function in the mac80211 callback config(). This way, the callback can be extended to handle multiple link/radio in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240103063731.3356060-2-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_register() and ath12k_mac_unregister()Karthikeyan Periyasamy
Currently, the mac80211 hw registration procedure is tightly coupled with the handling of link/radio (ar). Define a new helper function to separate the link/radio handling from the mac80211 hw registration procedure for improved code readability. Also, it can be easy to scale these functionality to support single/multi link operation in the future. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231206034920.1037449-5-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_setup_channels_rates()Karthikeyan Periyasamy
Currently, the MAC setup helper function is accessing the mac80211 hw data. In the future, to support single/multi link operation, need to decouple the mac80211 hw data from this helper function so that it can be easy to scale these functions to support single/multi link operations. So remove the mac80211 hw access from the ath12k_mac_setup_channels_rates() helper function. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231206034920.1037449-4-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: refactor ath12k_mac_allocate() and ath12k_mac_destroy()Karthikeyan Periyasamy
Currently, the MAC allocation and destroy helper functions are tightly coupled with the link/radio (ar) structure. In the future, to support single/Multi link operations, need to refactor these helper functions across the core and mac sub modules, so that it can be easy to scale these functions to support single/Multi link operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231206034920.1037449-3-quic_periyasa@quicinc.com
2024-01-16wifi: ath12k: relocate ath12k_dp_pdev_pre_alloc() callKarthikeyan Periyasamy
Currently, the data path pdev pre alloc and mac allocate are called separately from the core start procedure. The data path pdev pre alloc can be called from the mac allocate procedure itself since initialization related to pdev happens in the mac allocate procedure. So move the caller of DP pdev pre alloc from the core start procedure to the mac allocate procedure. This change helps in the future to easily decouple the mac allocate procedure from core start handling in order to support MLO in multi chip. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231206034920.1037449-2-quic_periyasa@quicinc.com
2023-12-05wifi: ath12k: avoid repeated wiphy access from hwKarthikeyan Periyasamy
Currently repeated access of wiphy data from mac80211 hw structure is happen inside the mac80211 registration helper functions. So optimize these helper functions by storing wiphy data locally and accessing it directly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231201013735.2292313-1-quic_periyasa@quicinc.com
2023-12-05wifi: ath12k: fix and enable AP mode for WCN7850Kang Yang
For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but ath12k_mac_op_assign_vif_chanctx() will try to create peer again. Then an error will return which makes AP mode startup fail. Kernel log: [ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22 wpa_supplicant log: Failed to set beacon parameters Interface initialization failed wls1: interface state UNINITIALIZED->DISABLED wls1: AP-DISABLED wls1: Unable to setup interface. Failed to initialize AP interface wls1: interface state DISABLED->DISABLED wls1: AP-DISABLED So fix this check and enable AP mode for WCN7850, as now AP mode works normally. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
2023-12-01wifi: ath12k: avoid repeated hw access from arKarthikeyan Periyasamy
Currently, the helper functions are accessing mac80211 hw data from the radio (ar) structure repeatedly. So optimize these helper functions by storing mac80211 hw data locally and accessing it directly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231120235812.2602198-3-quic_periyasa@quicinc.com
2023-12-01wifi: ath12k: Optimize the mac80211 hw data accessKarthikeyan Periyasamy
Currently mac80211 hw data is accessed by convert the hw to radio (ar) structure and then radio to hw structure which is not necessary in some places where mac80211 hw data is already present. So in that kind of places avoid the conversion and directly access the mac80211 hw data. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231120235812.2602198-2-quic_periyasa@quicinc.com
2023-12-01wifi: ath12k: add 320 MHz bandwidth enumsMuna Sinada
Add 320 MHz bandwidth as a new bandwidth enum for ATH12k driver. This is extending existing bandwidth related enums to include 320 MHz. This is a precursor to supporting 320 MHz in the future. Sanity test performed to confirm that there was no impact in existing bandwidths. Additionally update QuIC copyright to include 2023 in hal_rx.h. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00125-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231116221839.1303170-1-quic_msinada@quicinc.com
2023-11-30wifi: ath12k: Update Qualcomm Innovation Center, Inc. copyrightsJeff Johnson
Update the copyright for all ath12k files modified on behalf of Qualcomm Innovation Center, Inc. in 2023. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231128-ath12kcopyrights-v1-1-be0b7408cbac@quicinc.com
2023-10-25wifi: ath12k: Introduce and use ath12k_sta_to_arsta()Jeff Johnson
Currently, the logic to return an ath12k_sta pointer, given a ieee80211_sta pointer, uses typecasting throughout the driver. In general, conversion functions are preferable to typecasting since using a conversion function allows the compiler to validate the types of both the input and output parameters. ath12k already defines a conversion function ath12k_vif_to_arvif() for a similar conversion. So introduce ath12k_sta_to_arsta() for this use case, and convert all of the existing typecasting to use this function. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231019-upstream-ath12k_sta_to_arsta-v1-1-06f06f693338@quicinc.com
2023-10-18wifi: ath12k: register EHT mesh capabilitiesRamya Gnanasekar
The capabilities for the EHT mesh are generated from the capabilities reported by the firmware. But the firmware only reports the overall capabilities and not the one which are specific for mesh. Capabilities which requires infrastructure setup with a main STA(AP) controlling operations are not needed for mesh and hence remove these capabilities from the list. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231013070007.25597-3-quic_rgnanase@quicinc.com
2023-10-10wifi: ath12k: Consistently use ath12k_vif_to_arvif()Jeff Johnson
Helper function ath12k_vif_to_arvif() exists to retrieve a struct ath12k_vif from a struct ieee80211_vif. However, in multiple places this logic is open-coded with inline typecasting. Since the typecasting prevents the compiler from type-checking the source and destination, update the driver to consistently use the helper function. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20231004-ath12k_vif_to_arvif-v1-1-3f38f6882d33@quicinc.com
2023-10-02wifi: ath12k: add keep backward compatibility of PHY mode to avoid firmware ↵Wen Gong
crash In a special WCN7855 firmware release the EHT (IEEE 802.11be) support has been disabled for size reduction. Currently ath12k always enables EHT PHY mode during vdev start but with the special firmware that will cause a firmware crash during vdev start in firmware initialisation. This is because the firmware will use the EHT mode to allocate resources but as the EHT mode is not available in the firmware, there's an internal conflict and the firmware will crash. To fix the crash check the WMI_TLV_SERVICE_11BE flag to see if the firmware supports EHT. If EHT is not supported downgrade the PHY mode to HE (IEEE 802.11ax). This does not impact QCN9274, because WMI_SERVICE_11BE is always enabled for QCN9274, then eht_cap->has_eht will always set for it, and the logic of this patch will not take effect and the PHY mode will not down grade for it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230913105757.17744-1-quic_wgong@quicinc.com
2023-09-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.7. Major changes: ath12k * WCN7850: enable 320 MHz channels in 6 GHz band * WCN7850: hardware rfkill support * WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster ath11k * add chip id board name while searching board-2.bin
2023-09-28wifi: ath12k: Set default beacon mode to burst modeSidhanta Sahu
Currently, firmware does not like when beacon mode is set as staggered mode for more than one beaconing vifs. Beacon mode for multiple beaconing (transmitted) vifs are expected to be in burst mode. So set beacon mode to burst mode by default. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230905213943.12275-1-quic_sidhanta@quicinc.com
2023-09-28wifi: ath12k: call ath12k_mac_fils_discovery() without conditionAloka Dixit
Mac80211 does not set flags BSS_CHANGED_FILS_DISCOVERY and BSS_CHANGED_UNSOL_BCAST_PROBE_RESP if there are no updates to FILS discovery and unsolicited broadcast probe response transmission configurations respectively. For BSS change operations such as channel switch, this results in the transmissions getting stopped because the driver does not send WMI command to firmware if the flags are not set. Remove the checks for the flags to always send the existing configuration to firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230905174324.25296-1-quic_alokad@quicinc.com
2023-09-28wifi: ath12k: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN7850Wen Gong
Currently mac80211 will send 3 scan request for each scan of WCN7850, they are 2.4 GHz/5 GHz/6 GHz band scan. Firmware of WCN7850 will cache the RNR IE(Reduced Neighbor Report element) which exist in the beacon of 2.4 GHz/5 GHz of the AP which is co-located with 6 GHz, and then use the cache to scan in 6 GHz band scan if the 6 GHz scan is in the same scan with the 2.4 GHz/5 GHz band, this will helpful to search more AP of 6 GHz. Also it will decrease the time cost of scan because firmware will use dual-band scan for the 2.4 GHz/5 GHz, it means the 2.4 GHz and 5 GHz scans are doing simultaneously. Set the flag IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN7850 since it supports 2.4 GHz/5 GHz/6 GHz in a single wiphy/ieee80211_hw. This does not impact QCN9274, because it is not single_phy, so does not have 2.4 GHz/5 GHz/6 GHz in the same wiphy, then it does not match the condition and then IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS will not set for QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230913105507.17675-1-quic_wgong@quicinc.com
2023-09-28wifi: ath12k: indicate to mac80211 scan complete with aborted flag for ↵Wen Gong
ATH12K_SCAN_STARTING state Scan failure can not be recovered from when running a loop of the following steps: 1. run scan: "iw wlan scan". 2. run command: echo assert > /sys/kernel/debug/ath12k/wcn7850\ hw2.0/simulate_fw_crash immediately after step 1. result: scan failed and can not recover even when wlan recovery succeeds: command failed: Device or resource busy (-16) reason: When scan arrives, WMI_START_SCAN_CMDID is sent to the firmware and function ath12k_mac_op_hw_scan() returns, then simulate_fw_crash arrives and the scan started event does not arrive, and then it starts to do recovery of wlan. __ath12k_mac_scan_finish() which is called from ath12k_core_halt() is one step of recovery, it will not call ieee80211_scan_completed() by logic currently because the scan state is ATH12K_SCAN_STARTING. Thus it leads the scan not being completed in mac80211, and leads all consecutive scans failing with -EBUSY in nl80211_trigger_scan even after wlan recovery success. Indicate scan complete with aborted flag to mac80211 for ATH12K_SCAN_STARTING to allow recovery from scan failed with "Device or resource busy (-16)" after wlan recovery. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230905105947.10369-1-quic_wgong@quicinc.com
2023-09-28wifi: ath12k: add support for hardware rfkill for WCN7850Lingbo Kong
When hardware rfkill is enabled in the firmware, it will report the capability using WMI_SYS_CAP_INFO_RFKILL bit in the WMI_SERVICE_READY event to the host. Currently ath12k does not process this service capability. In order to support this, update ath12k to check if the capability is enabled, if so, send the GPIO information to firmware. When the firmware detects hardware rfkill is enabled by the user, it will report it using WMI_RFKILL_STATE_CHANGE_EVENTID. When ath12k receive the event, it will set the value of rfkill_radio_on based on whether radio_state is equal to WMI_RFKILL_RADIO_STATE_ON, then send WMI_PDEV_PARAM_RFKILL_ENABLE to firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230906110412.182176-1-quic_lingbok@quicinc.com
2023-09-20wifi: ath12k: fix radar detection in 160 MHzManish Dharanenthiran
Radar detection fails in the secondary 80 MHz when the the AP's primary 80 MHz is in non-DFS region in 160 MHz. This is due to WMI channel flag WMI_CHAN_INFO_DFS_FREQ2 is not set properly in case of the primary 80 MHz is in non-DFS region. HALPHY detects the radar pulses in the secondary 80 MHz only when WMI_CHAN_INFO_DFS_FREQ2 is set. Fix this issue by setting WMI channel flag WMI_CHAN_INFO_DFS_FREQ2 based on the radar_enabled flag from the channel context. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802085852.19821-3-quic_mdharane@quicinc.com
2023-09-20wifi: ath12k: fix WARN_ON during ath12k_mac_update_vif_chanManish Dharanenthiran
Fix WARN_ON() from ath12k_mac_update_vif_chan() if vdev is not up. Since change_chanctx can be called even before vdev_up. Do vdev stop followed by a vdev start in case of vdev is down. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1 Signed-off-by: Manish Dharanenthiran <quic_mdharane@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230802085852.19821-2-quic_mdharane@quicinc.com
2023-09-11wifi: cfg80211: annotate iftype_data pointer with sparseJohannes Berg
There were are a number of cases in mac80211 and iwlwifi (at least) that used the sband->iftype_data pointer directly, instead of using the accessors to find the right array entry to use. Make sparse warn when such a thing is done. To not have a lot of casts, add two helper functions/macros - ieee80211_set_sband_iftype_data() - for_each_sband_iftype_data() Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-23wifi: ath: remove unused-but-set parameterArnd Bergmann
This has never been used since the driver was merged, but it now causes a W=1 warning in recent clang versions drivers/net/wireless/ath/ath9k/main.c:1566:21: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] drivers/net/wireless/ath/ath9k/htc_drv_main.c:1258:25: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] drivers/net/wireless/ath/ath5k/mac80211-ops.c:367:62: error: parameter 'changed_flags' set but not used [-Werror,-Wunused-but-set-parameter] Remove the bit manipulation on the otherwise unused parameter. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230814073255.1065242-1-arnd@kernel.org
2023-08-23wifi: ath12k: Fix a few spelling errorsJeff Johnson
Fix a few issues flagged by 'codespell'. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230822-ath_spelling-v1-3-8e2698759564@quicinc.com
2023-08-03wifi: ath12k: relax list iteration in ath12k_mac_vif_unref()Dmitry Antipov
In ath12k_mac_vif_unref() dp->tx_desc_used_list[i] is not altered so list_for_each_entry() should be safe. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230704173718.73462-1-dmantipov@yandex.ru
2023-08-03wifi: ath12k: configure puncturing bitmapAloka Dixit
Enable the feature flag to indicate the driver support for preamble puncturing. Firmware will support this feature by default from IEEE 802.11be onwards. Configure the bitmap as part of VDEV start/restart and peer association commands. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-12-quic_alokad@quicinc.com
2023-08-03wifi: ath12k: prepare EHT peer assoc parametersAloka Dixit
Add new parameters and prepare the association data for an EHT peer. MCS data uses the format described in IEEE P802.11be/D2.0, May 2022, 9.4.2.313.4, convert it into the format expected by the firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-7-quic_alokad@quicinc.com
2023-08-03wifi: ath12k: add EHT PHY modesMuna Sinada
Add support to retrieve and configure the phy modes supported by the hardware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Muna Sinada <quic_msinada@quicinc.com> Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-6-quic_alokad@quicinc.com
2023-08-03wifi: ath12k: propagate EHT capabilities to userspaceAloka Dixit
Propagate EHT capabilities to the userspace using a new member 'eht_cap' in structure ieee80211_sband_iftype_data. MCS-NSS capabilities are copied depending on the supported bandwidths for the given band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu<quic_pradeepc@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-5-quic_alokad@quicinc.com
2023-08-03wifi: ath12k: move HE capabilities processing to a new functionAloka Dixit
The function ath12k_mac_copy_sband_iftype_data() is currently used HE capabilities propagation but it can be extended to include EHT data. Move the HE specific functionality from to ath12k_mac_copy_he_cap() to make EHT additions easier. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-3-quic_alokad@quicinc.com
2023-08-03wifi: ath12k: rename HE capabilities setup/copy functionsAloka Dixit
Functions ath12k_mac_setup_he_cap() and ath12k_mac_copy_he_cap() propagate HE and 6GHz capabilities to the userspace using an instance of struct ieee80211_sband_iftype_data. This structure now has a new member 'eht_cap' to include EHT capabilities as well. Rename the above mentioned functions to indicate that their use is not limited to HE. Also, replace the local variable 'band' with 'sband' and reuse 'band' for the type enum nl80211_band. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230725224034.14045-2-quic_alokad@quicinc.com
2023-08-02wifi: ath12k: change to use dynamic memory for channel list of scanWen Gong
Currently there are about 60 channels for 6 GHz, then the size of chan_list in struct scan_req_params which is 40 is not enough to fill all the channel list of 6 GHz. Use dynamic memory to save the channel list of scan. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230717033431.21983-1-quic_wgong@quicinc.com
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-22 23:19:15 +0000