Age | Commit message (Collapse) | Author |
|
The hardware isn't going to get fixed, so this mode cannot work
in the foreseeable future. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230614145722.ddbc16c4affe.Ia6921e4b8a9624d4f57489ac775105ed0e400313@changeid
[restore original subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for Extra EHT LTF defined in 9.4.2.313
EHT Capabilities element.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.de019d7cc174.I806f0f6042b89274192701a60b4f7900822db666@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The iwl_mvm_get_lmac_id() function is currently
defined as a static inline function under fw/api
and receives mvm's fw pointer. It will need the
ability to access other mvm struct members for
future capabilities such as debug. Move the function
out of the fw/api and into mvm proper as a regular
function and have it receive the pointer to mvm.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.507b2f9f64eb.I0ec91310e1911c33faf396b5e17bcb11a164f6ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, we only need to support BTM rejection.
However, in the future we might want to support other BTM modes.
Rephrase its naming.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.ad20f10668d1.Icbb3fbae50b2302b97225b183dd336b02a4f37ee@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support new firmware that can validate the validate bits in
sniffer mode, and advertise that fact and the result of the
checks in the U-SIG radiotap field.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230613155501.c20480aa1171.Icc0d077dae01d662ccb948823e196aa9c5c87976@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware needs to know the esr_transtition_timeout to time the
transition between EMLSR and single radio with the AP.
Add the EMLSR support bit to the wiphy extended capabilities so that
it'll be sent in our association request frame. There are some
limitations in the implementation so we cannot use zero
padding/transition delay; fill the correct values.
Also, feed the medium_synchronization delay to the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.09fa06820d03.Ie9a9fd37d4948f8c5dd91161de254184b1a093c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230612184434.71a7070aecd7.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This reverts commit b70813e4a88f ("wifi: iwlwifi: update response
for mcc_update command") since it causes a merge conflict, and it
seems easier to redo the patch later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some of the kernel-doc links are outdated due to other
changes, fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601171633.85e2cf489893.Ie3889ea6f755b80c988543ccca56c67420c51b1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some commands are no longer used and have broken kernel-doc links,
so just remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601171633.3dad4ad9b53e.I018abd02d6925950b8748dfb7a59db87255fc670@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Even for reserved values we shouldn't use u16, that's just
error prone. Fix this to __le16.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601171633.29ebf70aa64e.I1263f6724e1c70ff5541f447b9744f143ee736a3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is clearer in kernel-doc than spelling out the prefix.
It also lets us generate better tracing data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230601171633.e11ece794f60.I9874c7b0437071a2620d68ca5a16efed60da07a9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are mainly two types of BTM (BSS Transition Management)
requests, recommendations and notifications. For the first type,
a response is needed otherwise, most probably the STA will be
disconnected.
Since we don't want to wake up the host on it, set the BTM to reject
offload flag (if the device supports it) and rely on the FW to take
care of it. The FW will reject the BTM request and in case the AP
sends DEAUTH the FW can wake up the host to let it decide on the
next steps.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.d95ae6f2804c.I9457acc55bc23ce715c714b5088058f52540c224@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Calling this IWL_RX_PHY_DATA1_EHT_B0 is just confusing,
it's the RU allocation bit 0. Also then align the name
for B1-B7 accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230531194629.824edb28c0eb.Ia9f74573e3ac771911b679558984f1bfb36de674@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.fd9016f8f994.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the following notifications and commands mac_id was replaced
with link_id:
* CANCEL_CHANNEL_SWITCH_CMD
* CHANNEL_SWITCH_START_NOTIF
* CHANNEL_SWITCH_ERROR_NOTIF
The logic around was not changed, so only adjust handling
mac/link id.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.6aa6e394f5fe.Ie9e78918511ca901f9f3966d774fa74a71a186e3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware added new fields to be able to pass the link_id as the AP
knows it and the esr_transition_timeout.
For now, pass only the link_id since we don't have access to the
esr_transition_timeout yet.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.bf80ce717458.Icd4174911227c00cd12783fe1f517ae8097809b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This new version of missed beacon notification uses link_id
instead of mac_id. Also add an option to use link id for
retrieving vif.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230524203151.17fe1cc632f1.Id1fabb532e2174712fe17d4ad86a2c8c64ae84da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware no longer wants the beacon template inside the MAC command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230417113648.92aed4180a06.I277efa343c88081cb3fc890dcbeae3161cdffe16@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware split the HE support field into HE and "pseudo HE",
the latter is really for AP and doesn't implement trigger frame
handling for example.
Use the new field for AP mode.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.34dbfefe2a49.I0e39cd35dbe03ff9209b26733746479eae1c8966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case of UHB scan that follows a scan on legacy bands,
consider both scan commands as part of the same scan cycle,
and thus configure them to use the same antenna configuration.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.fd582c423ad8.I35239f94cb3ee1642d16936199c336a07ec2df8f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As part of version 2 we don't need to have wake_packet_bufsize
and wake_packet_length. The first one is already calculated by the driver,
the latter is sent as part of the wake packet notification.
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
HE/EHT support is reported to FW if there's at least one link
that supports it. Configure beacon separately for each link.
Don't send the beacon template before adding the MAC.
Co-developed-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104949.5ef4efeda2dd.I6ebda2b71c964b9aa63240c9fa1ee0d28099fe6e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The LINK cmd host api has been updated. Align the driver to the
new changes. Also, temporary use mac_id for link_id.
Using the phy_id as the link_id is wrong since we might have 2 macs
operating on the same phy - in this case we will have 2 different
links (one for each mac) with the same link_id. On the other hand,
since we don't have MLO implemented yet, we won't have 2 different
links of the same mac. Therefore, we can use the mac_id as the
link_id.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.78ae716884fe.Icfeb2794d9652baaccf9b0cdddbd751d0db4f952@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an MLD version of the remain_on_channel and
cancel_remain_on_channel callbacks.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230328104948.b51813dbebd4.Ia25bbd63d3138e4759237ce2be0cd0436fe01c0a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add debugfs file in mvm to retrieve TAS status per LMAC,
TAS block list, current mcc, OEM name and OEM allowed list.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.8efc8c41efae.I94e1a6efb9c33e2cdbcf4bf3ed2384005397dee9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For TM/FTM frames, report the hardware timestamps reported by the
fw as part of the RX/TX status. Since the fw reports the timestamps
in a dedicated notification (and not as part of the RX/TX status),
hold the frame until the fw timestamps notification is received.
Timestamping is enabled when a station is connected and disabled
when disconnected. For AP interface, only the first station will
have timestamping enabled since the fw only supports timestamping
for one peer.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If the firmware supports reading synced GP2/ATRB timestamps,
read the synced timestamps from firmware instead of reading the
GP2 register and the system time separately. Reading the synced
time from firmware should be more accurate.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230320122330.a6be5f0b5580.Idedb496a5943fa496143066ffbed08185a8c4582@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a part of the new MLD FW API changes, we have new commands for STA
related operations (add/remove/aux/disable tx).
Add structures and enum definitions, along with part of the functions
that sends this commands.
This functions will be in used and more will be added in the next patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230314194113.132873ce015c.I7b12a77e5be066730762e6ceeeaa7190293c3df1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a part of the new MLD FW API changes, we have a new LINK command
to add/remove/configure a link.
Add structures and enum definitions, along with the functions that
sends this command (i.e. add, remove and change mac ctxt).
These functions will be in used in the next patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230314194113.d7808329effb.I13bea2db206b78540bc866bc3ab755ad5be78c53@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a part of the new MLD FW API changes, we have a new MAC CTXT command.
Add structures and enum definitions, along with the functions that
sends this command (i.e. add, remove and change mac ctxt).
This functions will be in used in the next patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230314194113.99a41a5bc55f.I310312c829f5f2f69b64fcddce487b1eab80165b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
FW new API added the info missing for update RU allocation,
so use the new API to update radiotap information.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.b16acaa4bad1.I53afa03058dbd2cd8afbaf5e82596c8ed501a476@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
VHT, HE and EHT rates use the same bits for NSS, so no need for
defines per PHY version.
Also use spatch to replace bit manipulation with FIELD_GET:
@@
identifier rate;
@@
-((rate & RATE_MCS_NSS_MSK) >> RATE_MCS_NSS_POS)
+FIELD_GET(RATE_MCS_NSS_MSK, rate)
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.167ed9477aa8.Ibd8e71d31896e8d8f067ce4e3a6e9a0e86c78f3f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In EHT sniffer mode DW4 is all used for sniffer data (unlike we have in
HE mode), so move the full DW4 into a union, and we extract the new data5
used for parsing USIG info and set all to radiotap TLVs with the
extracted data.
Also parse OFDM_RX_VECTOR_USIG_A1_OUT and OFDM_RX_VECTOR_USIG_A2_OUT for
rx_no_data notification.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.557d3870753b.I4e9fa4d21900a187753529d46956ba2a7ee75fda@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The type RX_NO_DATA_INFO_TYPE_HE_TB_UNMATCHED is applied to all TB
frames including EHT mode, so rename accordingly.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.e4f51f347e48.I2d6ecb6eadc95666d2ef9794662ee779488ceac1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update all radiotap EHT TLVs that we can extract from data0 in HW.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.730f219e02ee.Ife3dd85c65758694d7602e8bc8660887d77faacf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
rate_n_flags is always present in the data so at least give all of
the information we can extract from rate_n_flags
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230305124407.b1c7d49ad35e.Ie2412ac6f88700aa3767ff95ffb52a806b13b7ce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We add TSF overwrite for EHT MU/TB high and low, and add definitions
for EHT Data 5 meta data.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://lore.kernel.org/r/20230127002430.6729c0be66aa.I95ad94d5e137ec80010facd8ee57cd40461a0721@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Start by adding a parsing option for all the new fields coming from FW
and checking that we have the right version for parsing EHT.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://lore.kernel.org/r/20230127002430.ba9b364fbacf.I469af2a07b3ff51cbd8d67e572478f4c56ce22ba@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Add a comment to mention the structure used for the response for the
flush command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20230127002430.422c9fbac12c.I2da0954d1c62007b5f01faf06df3e4081e52204f@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Follow a new firmware API changes and update the queue allocation
command in the remove/modify cases to take the station mask and
TID instead of the queue ID.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221205102808.2925b38d3929.Ib8467711590c1969817c3321509eb131f4230e15@changeid
|
|
In an EHT connection fill in the HE context command
with PPE Thresholds field from EHT Capabilities IE.
If PPE Thresholds field presents only in HE Capabilities IE,
take the thresholds from there.
If it's not present in both - set the Common Nominal Packet Padding
field from EHT Capabilities IE.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://lore.kernel.org/r/20221122220713.062ac86110f2.I0bcd5ee35f4d987a49f15501985f90e0d3ce7590@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Rate scale needs to be configured to what MCS it can use per BW and NSS,
this is done by parsing our capabilities of TX and peer's capabilities of
RX and setting the minimum for rate scale usage.
Also do some cleanup removing redundant enum defines not used by
FW/Driver.
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Link: https://lore.kernel.org/r/20221122220713.f71f3b4c4583.I7b5e8071df91146c4bee3e9bcb7ad62595b275e1@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Support 320 MHz PHY configuration and while doing so rewrite
the code since we'd otherwise double the number of cases in
the switch statement.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20221122220713.964db911b733.If56c94a9bf20c050f35d2421b680e400a9f4aeb8@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
In order to support MLD, the key API is also changing to have
station masks instead of just the station ID etc. Change the
driver to support this, and add the new code in a new file so
it's more clearly separated.
For now this isn't separated at the mac80211 ops level, which
we wanted to do, but we're calling these functions in a place
when pre-start keys are installed in iwl_mvm_start_ap_ibss(),
and the function has some glue logic to mac80211. We may want
to change that later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221102165239.ed9ccd814abc.Iacc7360de68807fbac19e5b67c86504b39cc15df@changeid
|
|
To support FW versions that send the scan match information as
an asynchronous notification.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.bbc5602d0b6f.I1329c231f82e7bf18f7dba0ccbd9f2d4080cbfc1@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Due to IMR, when host returns from hibernate, commands cannot
be sent as part of the resume flow, and so after ending
d3 the FW needs to send notifications instead of responses.
This notification indicates whether a fw reset is required.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.898ecba881b2.I13eb69bb5af08b9ac33043647eaed6b8d50e8659@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
The wowlan info notification is quite big.
(~750 bytes without the wake packet itself).
The max FW notification size is ~2K.
There might be cases where the wake packet gets truncated because of
this limit.
Separating the wake packet from the wowlan info notification allows us to
get more data without trimming it.
Note: we currently limit the wake packet to 1600 bytes.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.06d1e6aecf10.Ib3d6a46ffe71d10cbc69bdb5654e6b14c28df245@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
IMR (Isolated Memory Regions) is a mechanism to protect memory regions
from unwarranted access by agents in the system that should not have access
to that memory.
When IMR is enabled, pages in the DRAM will be located within the IMR
memory space, accessible only by the device.
As a side effect, during S4 (a.k.a hibernate) the IMR memory space
is not retained.
While the DRAM is saved to the disk and restored by the OS upon resume,
the IMR, which is hidden from the OS neither saved upon suspend nor
restored upon resume.
As a consequence of the above, it turned out that commands cannot
be sent as part of the resume flow, and so after ending
d3 the FW needs to use notifications instead of cmd-resp.
The resume flow becomes asynchronous, with a series
of notifications, starting with wowlan_info_notif, through
wowlan_pkt_notif and complete the resume flow by d3_end_notif.
This patch adds the support for wowlan info notification.
The wake packet has been removed from the wowlan info struct
and will be handled in a dedicated notification.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220906161827.3ce8deefd929.Ieba8610e8bb4bec788076371ae38becb4a3d20d5@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|