summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/link.c
AgeCommit message (Collapse)Author
2024-05-06wifi: iwlwifi: mvm: exit EMLSR if secondary link is not usedMiri Korenblit
Exit EMLSR mode if the secondary link is not used enough for Rx/Tx Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240506095953.99ad1d71e9b9.Ide825433488ec809773efdc36937e3089d0012df@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Add a print for invalid link pair due to bandwidthYedidya Benshimol
When validating a link pair for EMLSR, add a print for invalid link pair due to bandwidth Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.9e57ad898cf4.Id8edfd5e3774ea6475d5f4178ab7ea75a870ef95@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: add a debugfs for reading EMLSR blocking reasonsYedidya Benshimol
Add a reading for all active EMLSR blocking reasons for testing purposes. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.6d494a335e81.Ic0fa6a9636e3c1a3b1420e85e704a19d4a56e8d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Add active EMLSR blocking reasons printsYedidya Benshimol
Upon adding/removing an EMLSR blocking reason add to the print the EMLSR disabling mask Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240506095953.1e34fe2c3e51.Ia7db0392d81818ceb70a7b199d3f5fa8a4ad198d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: Print EMLSR states nameDaniel Gabay
This is useful for debug instead of looking for the hex value. Signed-off-by: Daniel Gabay <daniel.gabay@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.f3509cf652f2.Ic086b6b2132ffe249b3c4bdd24c673ce7fd1b614@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is activeYedidya Benshimol
When there's an active link in a non-station vif, the station vif is not allowed to enter EMLSR Note that blocking EMLSR by calling iwl_mvm_block_esr() we will schedule an exit from EMLSR worker, but the worker cannot run before the activation of the non-BSS link, as ieee80211_remain_on_channel already holds the wiphy mutex. Handle that by explicitly calling ieee80211_set_active_links() to leave EMLSR, and then doing iwl_mvm_block_esr() only for consistency and to avoid re-entering it before ready. Note that a call to ieee80211_set_active_links requires to release the mvm mutex, but that's ok since we still hold the wiphy lock. The only thing that might race here is the ESR_MODE_NOTIF, so this changes its handler to run under the wiphy lock. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.916193759f8a.Idf3a3caf5cdc3e69c81710b7ceb57e87f2de87e4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: fix typo in debug printMiri Korenblit
Change EMSLR to EMLSR Fixes: 6cf7df9f013f ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.db629302bfdc.I135e28b89fab3b614ad8758c0305834934f8c0af@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: exit EMLSR when CSA happensJohannes Berg
If CSA is happening, then exit EMLSR to keep the better link, which is the primary link unless that's doing the CSA with quiet. This is done because we can't transmit the OMN frame on a quiet link, but want to exit EMLSR during CSA for better beacon reception, so we can follow the switch accurately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.3ffff9577f08.I2620971fa5aef789e0d4a588def4c2621e8bed5b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Disable/enable EMLSR due to link's bandwidth/bandYedidya Benshimol
Enable EMLSR when bandwidth settings meet the criteria in both band and width, otherwise disable. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4e473d4f7f5c.I3adf5619b60bfba8af0cd7eae9dac947419603b6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: avoid always prefering single-linkMiri Korenblit
The new link selection algorithm uses defaults values for BSS load if the BSS Load element was not published by the AP. For 6 GHz, that value is 0. So if the best link is 6 GHz, the EMLSR grade to always be equal to the grade of the best link, and then the best link grade is getting a bonus of 10 percent, meaning that we will never activate EMLSR. Change the logic to not give a bonus for the best link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.4614e6891dbd.Ie40eae0dd99d82ba60dea5b6dbcd42dcdf16b90d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: don't always unblock EMLSRMiri Korenblit
When an event occurs to unblock EMLSR, the code attempts to re-enable EMLSR. However, the current implementation always tries to activate EMLSR, regardless of whether the blocker was set before the unblocking event or not. If EMLSR was already unblocked, there is no need to re-activate it. Fixes: 6cf7df9f013f ("wifi: iwlwifi: mvm: Add helper functions to update EMLSR status") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.eb861402dac9.I6a1d9f774f5551cfab60ea37b71a62640496af9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: Always allow entering EMLSR from debugfsMiri Korenblit
EMLSR can't be activated from mac80211. Except for the debugfs, which is intended for testing purposes. Currently we don't allow entering EMLSR from debugfs if EMLSR is blocked, i.e. if mvmvif::esr_disable_reason is not 0. But we need a way to activate EMLSR regardless of the vif being blocked, for testing. Remove the check of esr_disable_reason Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.bc3c24d9e0e6.Iad60e22a0d7e2b2b989051e1140b6dc98bef7bcc@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: mvm: trigger link selection after exiting EMLSRMiri Korenblit
If the reason for exiting EMLSR was a blocking reason, wait for the corresponding unblocking event: - if there is an ongoing scan - do nothing. Link selection will be triggered at the end of it. - If more than 30 seconds passed since the exit, trigger MLO scan, which will trigger link selection - If less then 30 seconds passed since exit, reuse the latest link selection result If the reason for exiting EMLSR was an exit reason (IWL_MVM_EXIT_*), schedule MLO scan in 30 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Link: https://msgid.link/20240505091420.6a808c4ae8f5.Ia79605838eb6deee9358bec633ef537f2653db92@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-06wifi: iwlwifi: cleanup EMLSR when BT is active handlingMiri Korenblit
BT Coex disables EMLSR only for a 2.4 GHz link, but doesn't block the vif from using EMLSR with a different link pair. In addition, storing it in mvmvif:disable_esr_reason requires extracting the BT Coex bit before checking if EMLSR is blocked or not for a specific vif. Therefore, change the BT Coex bit to be an exit reason and not a blocker. On link selection, EMLSR mode will be re-calculated for the 2.4 GHz link instead of checking that bit. While at it, move the relevant function declarations to the EMLSR functions area in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240505091420.a2e93b67c895.I183a0039ef076613144648cc46fbe9ab3d47c574@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22wifi: iwlwifi: mvm: fix link ID managementJohannes Berg
On older (pre-MLD API) devices, we started also calling iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(), but of course not also iwl_mvm_remove_link(). Since the link ID was only released in iwl_mvm_remove_link() this causes us to run out of FW link IDs very quickly. Fix it by releasing the link ID correctly. Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW") Link: https://msgid.link/20240420154435.dce72db5d5e3.Ic40b454b24f1c7b380a1eedf67455d9cf2f58541@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Don't allow EMLSR when the RSSI is lowMiri Korenblit
If the RSSI of a link is low enough, don't use it for EMLSR. If EMLSR is already active and the RSSI of one of the links gets low, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.73263c000263.Ieb2b18855a2719b5e18ad2fa8a3e855ca4e23938@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: disable EMLSR when we suspend with wowlanYedidya Benshimol
We can't be an EMLSR while suspended with wowlan. De-activate the secondary link upon wowlan entring. Set the blocking reason upon suspension and clear it upon resume. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.6ea884b3f095.I84233cb1c79ba538defafb8ddb983c47f04a400a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: don't recompute EMLSR mode in can_activate_linksMiri Korenblit
mac80211 invokes the driver callback drv_can_activate_links() from ieee80211_set_active_links to verify it can activate the desired link combination. However, ieee80211_set_active_links is called with more than one link in 2 cases: - After driver's link selection decided to enter EMLSR - From debugfs, for testing purposes. For both cases there is no need to recompute all the considerations determining whether to activate EMLSR. Instead, only check if the vif is not blocked for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.202cf5a9ef2c.I65e4698b730a8652ad8d1c01420aabb41a1d04fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement EMLSR prevention mechanism.Miri Korenblit
Address scenarios where repeated entry and exit from EMLSR occur, such as encountering missed beacons on a specific link, while still discovering that link during a scan. To mitigate this, introduce the EMLSR prevention mechanism, which operates as follows: - On each exit from EMLSR event, record the timestamp and the exit reason. - If two consecutive exits happen for the same reason within a 400-second window, enforce a 300-second EMLSR prevention. - If a third exit for the same reason occurs within 400 seconds from the second exit, enforce an extended EMLSR prevention of 600 seconds. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d820ee98b300.I6406db40cf25eabdba602afd783466473b909216@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: exit EMLSR upon missed beaconMiri Korenblit
In case of more than 6 missed beacons on one of the links, exit EMLSR by deactivating that link. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240416134215.f9111c79cb53.Ie95ea60149a9bc4367f6b338b37c8635051351ba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Add helper functions to update EMLSR statusMiri Korenblit
There are reasons for which we need to exit EMLSR, but not to block it completely, and there are reasons for which we need to block EMLSR. For both reason types we have the enum iwl_mvm_esr_state, when the blocking reasons are stored in the `mvmvif::esr_disable_reason` bitmap. This change introduces the APIs to use in the different cases: - iwl_mvm_exit_esr - will exit from EMLSR mode. - iwl_mvm_block_esr - will update the bitmap and exit EMLSR, to be used for the blocking reasons only. - iwl_mvm_unblock_esr - will update the bitmap. To be used for the blocking reasons only. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.d54142a75876.I552926065521f5f848c37b0bd845494bd7865fb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: Implement new link selection algorithmMiri Korenblit
Replaces the current logic with a new algorithm based on the link grading introduced in a previous patch. The new selection algorithm will be invoked upon successful scan to ensure it has the necessary updated data it needs. This update delegates the selection logic as the primary link determiner in EMLSR mode, storing it in mvmvif to avoid repeated calculations, as the result may vary. Additionally, includes tests for iwl_mvm_valid_link_pair to validate link pairs for EMLSR. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.309fb1b3fe44.I5baf0c293c89a5a28bd1a6386bf9ca6d2bf61ab8@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: move EMLSR/links codeMiri Korenblit
The functions that are link related, so they should be in link.c and not in mld-mac80211.c. Move them. Also move the different prototypes to the right place in mvm.h Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.e7c368256fa0.I6b15805a7c8a75d1814f1a829601daf4d3788731@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-19wifi: iwlwifi: mvm: implement link gradingMiri Korenblit
For selecting what link(s) out of the usable ones to activate, calculate a grade for a given link. Calculation of a link grade is done as follows: 1. get the estimated throughput according to the RSSI of the link, this will be the base grade 2. get the channel load from the BSS Load Element, subtracting the load caused by us. Apply the factor on the grade. 3. puncturing factor: calculate the percentage of the punctured subchannels (out of the total subchannels). Apply this on the grade. The link grading will be used by the link selection mechanism in a later patch. Also add KUnit tests for it. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240416134215.a6799dbd5643.If137ca6dc443606c7d8c99ec1fc38b325003a7c1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-25wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FWIlan Peer
In the non MLD firmware flows, although the deflink is used, the mapping of link ID to BSS configuration was missing, which causes flows that need this mapping to crash. Fix this by adding the link ID to BSS configuration mapping to non MLD flows as well. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240311081938.0b5c361e8f0c.Ib11f41815d2efa5d1ec57f855de4c8563142987b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21wifi: iwlwifi: mvm: support PHY context version 6Johannes Berg
Fill the new puncture mask in the PHY context command if supported. In this case, also don't send it in the link context command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240218194912.16d9f5fc41df.I9eeb55787d8483f820f5790e8874761f598da314@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211/mac80211: move puncturing into chandefJohannes Berg
Aloka originally suggested that puncturing should be part of the chandef, so that it's treated correctly. At the time, I disagreed and it ended up not part of the chandef, but I've now realized that this was wrong. Even for clients, the RX, and perhaps more importantly, CCA configuration needs to take puncturing into account. Move puncturing into the chandef, and adjust all the code accordingly. Also add a few tests for puncturing in chandef compatibility checking. Link: https://lore.kernel.org/linux-wireless/20220214223051.3610-1-quic_alokad@quicinc.com/ Suggested-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://msgid.link/20240129194108.307183a5d2e5.I4d7fe2f126b2366c1312010e2900dfb2abffa0f6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: support link command version 2Shaul Triebitz
In version 2, listen_lmac becomes reserved. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240201155157.df1890aba2fd.Icad9ba10f8bab770adc6a559b2c7bff5cccbffe9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Return success if link could not be removedBenjamin Berg
iwl_mvm_remove_link would return an error if the link could not be removed. However, doing so prevents recovery if a link was not uploaded to the FW in the first place and the link_info was not allocated or fw_link_id is not set. Returning success means that we can still try to continue with adding new links in change_vif_links. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.f89bc05aadf6.Idc8fbd671362d962c02b1df87fa6258733631580@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix size check for fw_link_idGregory Greenman
Check that fw_link_id does not exceed the size of link_id_to_link_conf array. There's no any codepath that can cause that, but it's still safer to verify in case fw_link_id gets corrupted. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231017115047.3385bd11f423.I2d30fdb464f951c648217553c47901857a0046c7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: don't add dummy phy contextEmmanuel Grumbach
From its very first stages of development, iwlmvm added all the PHY context immediately upon firmware boot. Then, all we needed to do is to modify the contexts. This was fine if the addition of a PHY context that we don't need is free. This was true until now. Newer devices will run calibrations upon the addition of a PHY context. Change the way we work with PHY context in iwlmvm. Fortunately, we already have all the ref counting in place so that it is not very hard to do. Also, since we now remove the PHY context before the link is removed (but after it has been de-activated of course), it'll confuse the firmware if we put the late phy_id into the LINK command that removes the link. Change this to put an invalid phy_id just like we do when we add a link that has no PHY context yet. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.55a1a78719be.I2032a7d227b57f4fc4370a2793476d47538404fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Correctly set link configurationIlan Peer
In case the link puncturing is changed such that the channel is no longer punctured, configure the FW correctly indicating the EHT parameters changed (with a 0 punctured map). Allow EHT parameters configuration only when the link really supports EHT. Fixes: 55eb1c5fa4b2 ("wifi: iwlwifi: mvm: add support for the new LINK command") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Don't always bind/link the P2P Device interfaceIlan Peer
It is not necessary to keep the P2P Device bound/linked to a PHY context when there is no active ROC. Modify the P2P Device flows so the binding/linking would be done only while ROC is active. With this change the switch_phy_ctxt() is no longer needed so remove it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-21wifi: iwlwifi: mvm: make iwl_mvm_set_fw_mu_edca_params mld awareEmmanuel Grumbach
We need to work on the right link there. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230620125813.8762a90e8857.Ic5b8e96140a449fd1ed7008907d67fc36fe98506@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: handle eSR transitionsMiri Korenblit
There several transitions to handle in eSR mode: * SMPS should be disabled when in eSR mode * indicate to the fw whether the new added link should use the listen lmac or the main lmac * RLC is offloaded when in eSR mode; adjust RLC command accordingly Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.fb6409f44aca.I502460dec15e0b76035ad3cd809afa4ac16e9fe1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: fix max number of fw active linksMiri Korenblit
The max active links that are supported by the FW is hard coded. This is wrong since this value is HW-dependent. Fix this by determining according to the actual HW. Also remove a redundant check that the number of active links doesn't exceeds the maximum. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230615094410.e78ad74c6715.I68b26911c0a312d72eaf25344b448d03b1c61f4e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: mvm: always send spec link ID in link commandsJohannes Berg
The firmware technically only needs this when the link is newly added, but it's much easier for debugging if it's always available, so include it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.daecd0e626f7.I0f8a16a6d80a283c9f947c9bb0fc50a7c6853948@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-19wifi: iwlwifi: use array as array argumentJohannes Berg
When calling iwl_mvm_set_fw_qos_params() we explicitly pass a pointer to the first array element, but the function will treat it as an array. Simplify and clarify the code and pass the array instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230614123446.6fb4a9743b1b.I801007d207f6539a9e0996366ec593e2038b1f90@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-07Merge wireless into wireless-nextJohannes Berg
There are a number of upcoming things in both the stack and drivers that would otherwise conflict, so merge wireless to wireless-next to be able to avoid those conflicts. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: iwlwifi: mvm: update the FW apis for LINK and MAC commandsEmmanuel Grumbach
The firmware added new fields to be able to pass the link_id as the AP knows it and the esr_transition_timeout. For now, pass only the link_id since we don't have access to the esr_transition_timeout yet. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230524203151.bf80ce717458.Icd4174911227c00cd12783fe1f517ae8097809b9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-06wifi: iwlwifi: mvm: use link ID in missed beacon notificationYedidya Benshimol
This new version of missed beacon notification uses link_id instead of mac_id. Also add an option to use link id for retrieving vif. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230524203151.17fe1cc632f1.Id1fabb532e2174712fe17d4ad86a2c8c64ae84da@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-05-16wifi: iwlwifi: mvm: fix number of concurrent link checksJohannes Berg
The concurrent link checks need to correctly differentiate between AP and non-AP, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230514120631.992b2f981ef6.I7d386c19354e9be39c4822f436dd22c93422b660@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: rework active links countingGregory Greenman
Remove fw_active_links_num counter since we now have a bitmap of active links in vif. Also, update link activation status only when LINK_CONTEXT_MODIFY_ACTIVE bit set in changes parameter. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230329100040.1ecfb27b6b84.I3a5e0bc32b3728e4caae8a231bc3f04ea1d89cad@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: implement link change opsJohannes Berg
Implement the link change ops for links and stations. Note that the stations one is empty for now as we only have support for a single link so far, and then the stations are created with the first link as deflink by mac80211, so right now we don't really need anything. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.6186c5a37e99.Ifd00d3ee93356ddef273aa18f1e081cd8f2c84ae@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: add fw link id allocationGregory Greenman
Driver uses link_id as an index in the array. FW currently can support only 2 concurrently active links per vif with the ids in the range 0-3. Add a mapping of dirver link ids to fw link id and track the number of active link ids. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: replace bss_info_changed() with vif_cfg/link_info_changed()Gregory Greenman
These are two new handlers for MLO. As the configurations done in bss_info_changed() are now split into two separate flows, use MLO specific implementation instead of common functions with the non-MLO code. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.7b238cae0895.Ieb87f204787fb1c7cb7562e1cbf54ef518d87123@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: add link_conf parameter for add/remove/change linkGregory Greenman
Add link_conf parameter and change all the relevant calls accordingly. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.374015eed2e3.Icbf15a18e2599b53f4fa1c92fe3db64b551b84b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: add link to firmware earlierJohannes Berg
The firmware now allows adding a link that's not yet bound to a PHY context. Make use of that to align the driver with mac80211's API expectations. For now, just add the link at the same time as the MAC since we don't yet have real MLD support, but that'll obviously change later. This fixes an issue with apStaId tracking in the firmware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104949.097e5008b637.I4e75c6c11e21c08d28ff6a066be36629d3975db6@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: iwlwifi: mvm: align to the LINK cmd update in the FWMiri Korenblit
The LINK cmd host api has been updated. Align the driver to the new changes. Also, temporary use mac_id for link_id. Using the phy_id as the link_id is wrong since we might have 2 macs operating on the same phy - in this case we will have 2 different links (one for each mac) with the same link_id. On the other hand, since we don't have MLO implemented yet, we won't have 2 different links of the same mac. Therefore, we can use the mac_id as the link_id. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230328104948.78ae716884fe.Icfeb2794d9652baaccf9b0cdddbd751d0db4f952@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-29 20:22:15 +0000