| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2024-03-25 | wifi: iwlwifi: mvm: fix the sta id in offload | Shaul Triebitz | |
| With MLO, the station id in wowlan can be other than 0. Set the correct station in the protocol offload command. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240311081938.ace4f793872d.Id984110576a72acc84493217ca95564c3cd362bd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> | |||
| 2023-06-14 | wifi: iwlwifi: mvm: rename BTM support flag and its TLV | Haim Dreyfuss | |
| Currently, we only need to support BTM rejection. However, in the future we might want to support other BTM modes. Rephrase its naming. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230613155501.ad20f10668d1.Icbb3fbae50b2302b97225b183dd336b02a4f37ee@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> | |||
| 2023-06-06 | wifi: iwlwifi: mvm: offload BTM response during D3 | Haim Dreyfuss | |
| There are mainly two types of BTM (BSS Transition Management) requests, recommendations and notifications. For the first type, a response is needed otherwise, most probably the STA will be disconnected. Since we don't want to wake up the host on it, set the BTM to reject offload flag (if the device supports it) and rely on the FW to take care of it. The FW will reject the BTM request and in case the AP sends DEAUTH the FW can wake up the host to let it decide on the next steps. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230531194629.d95ae6f2804c.I9457acc55bc23ce715c714b5088058f52540c224@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> | |||
| 2022-06-20 | wifi: mac80211: move interface config to new struct | Johannes Berg | |
| We'll use bss_conf for per-link configuration later, so move out all the non-link-specific data out into a new struct ieee80211_vif_cfg used in the vif. Some adjustments were done with the following spatch: @@ expression sdata; struct ieee80211_vif *vifp; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ ( -sdata->vif.bss_conf.var +sdata->vif.cfg.var | -vifp->bss_conf.var +vifp->cfg.var ) @bss_conf@ struct ieee80211_bss_conf *bss_conf; identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator }; @@ -bss_conf->var +vif_cfg->var (though more manual fixups were needed, e.g. replacing "vif_cfg->" by "vif->cfg." in many files.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> | |||
| 2022-02-18 | iwlwifi: make iwl_fw_lookup_cmd_ver() take a cmd_id | Johannes Berg | |
| Instead of taking the group/command separately, make the function take a combined command ID. In many cases, this allows us to pass an existing command ID (e.g. cmd.id), or introduce a new variable for it, so that we don't use the command ID twice. This way, we can also use LONG_GROUP implicitly, so we don't need to spell that out for many commands. Apart from mvm.h, fw/img.{c,h} changes and some copyright and indentation updates, this was done with spatch: @@ identifier cmd; expression fw, G, C, def; @@ struct iwl_host_cmd cmd = { .id = WIDE_ID(G, C), ... }; ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier cmd; expression fw, C, def; @@ struct iwl_host_cmd cmd = { .id = C, ... }; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd.id, def) @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = WIDE_ID(G, C); ... -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, WIDE_ID(G, C), flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ identifier func; expression fw, G, C, mvm, flags, cmd, size, def; type rettype; @@ rettype func(...) { +u32 cmd_id = C; ... -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, cmd_id, def) ... -iwl_mvm_send_cmd_pdu(mvm, C, flags, cmd, size) +iwl_mvm_send_cmd_pdu(mvm, cmd_id, flags, cmd, size) ... } @@ expression fw, C, def; @@ -iwl_fw_lookup_cmd_ver(fw, \(IWL_ALWAYS_LONG_GROUP\|LONG_GROUP\), C, def) +iwl_fw_lookup_cmd_ver(fw, C, def) @@ expression fw, C, G, def; @@ -iwl_fw_lookup_cmd_ver(fw, G, C, def) +iwl_fw_lookup_cmd_ver(fw, WIDE_ID(G, C), def) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220128153014.c4ac213cef5c.I6fd9a4fcbcf16ef3a3ae20a2b08ee54ebe06f96f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> | |||
| 2021-06-22 | iwlwifi: mvm: introduce iwl_proto_offload_cmd_v4 | Emmanuel Grumbach | |
| We need to pass the station id to tell the firmware on which station we want to configure the protocol offload. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210618105614.c25913d2c08c.Ic0fefac81afb9a2fe396d73528e30e09a8c5eae0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> | |||
| 2020-12-10 | iwlwifi: use SPDX tags | Johannes Berg | |
| Use SPDX tags instead of the long copyright notices. Also cleanup some duplicate copyright notices and combine the years where possible. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> | |||
| 2018-08-31 | iwlwifi: remove all occurrences of the FSF address paragraph | Luca Coelho | |
| The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> | |||
| 2015-12-16 | iwlwifi: mvm: change protocol offload flows | Sara Sharon | |
| RFC4862 states that "In all cases, a node MUST NOT respond to a Neighbor Solicitation for a tentative address". Currently the driver configures the NS offload and does not wait for address to become permanent, thus violating the RFC. Just removing the address from the address list is not good enough for all cases, since the NS messages are needed for the duplicate address detection and should not be discarded. For d0i3 disable NS offload. Put tentative address in the address list so the NS packet will not be filtered out by ucode. For D3 the platform will not wake from NS packets - so enable NS offload while removing the tentative address from the list. Given that now NS offload might be disabled, and that the ucode uses the IP data for other puroposes (L3 filtering) add two independent flags indicating if IPv4\IPv6 data is valid. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> | |||
| 2015-12-01 | iwlwifi: change the Intel Wireless email address | Emmanuel Grumbach | |
| ilw@linux.intel.com is not available anymore. linuxwifi@intel.com should be used instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> | |||
| 2015-11-18 | iwlwifi: move under intel vendor directory | Kalle Valo | |
| Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | |||
 |
index : pm24.git | |
| Unnamed repository; edit this file 'description' to name the repository. |
| summaryrefslogtreecommitdiff |