summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)Author
2023-10-23wifi: iwlwifi: mvm: extend alive timeout to 2 secondsHaim Dreyfuss
There are devices that need longer time to get the alive notification. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.f1f0aa1794e6.I34a06ef24b642a32af69c0bd109694de469d5177@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix the PHY context resolution for p2p deviceEmmanuel Grumbach
We seem to have an issue in case we had a BSS and a P2P device on channel 1 and then, the P2P device gets an ROC on channel 6. We would change the channel of the PHY context to channel 6 even if the BSS was using that same PHY context. Revamp that code and don't try to change a PHY context, it doesn't mean much for the firmware anyway. Just remove it and allocate a new one. This makes the logic easier to follow. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.4bc8b90d7be0.I1232dca3fe007362ec0ae0cf1d96217f2544e0d2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fold the ref++ into iwl_mvm_phy_ctxt_addEmmanuel Grumbach
When we want to add a phy_ctxt, we need to increase the ref. Note that all the WARN_ONs are already in place: * We check that we don't add a context with ref != 0 * We check that we don't modify a context with ref = 0 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.c19c07746b26.I5b0cbe0760811631a320218a10b88870b5bf0897@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: don't add dummy phy contextEmmanuel Grumbach
From its very first stages of development, iwlmvm added all the PHY context immediately upon firmware boot. Then, all we needed to do is to modify the contexts. This was fine if the addition of a PHY context that we don't need is free. This was true until now. Newer devices will run calibrations upon the addition of a PHY context. Change the way we work with PHY context in iwlmvm. Fortunately, we already have all the ref counting in place so that it is not very hard to do. Also, since we now remove the PHY context before the link is removed (but after it has been de-activated of course), it'll confuse the firmware if we put the late phy_id into the LINK command that removes the link. Change this to put an invalid phy_id just like we do when we add a link that has no PHY context yet. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.55a1a78719be.I2032a7d227b57f4fc4370a2793476d47538404fd@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: cleanup MLO and non-MLO unification codeMiri Korenblit
bss_info_changed() callback of mac80211 was originally in both MLD and non-MLD API. Therefore, we extracted the common part to a function which receives a callback structure with the mode-specific (non-MLO\MLO) ops. Eventually, for MLO API, bss_info_changed() callback was split into 2 callbacks: link_info_changed() and vif_cfg_changed() so it is no longer in use for MLO, only for non-MLO. Remove the code that uses the mode-specific callback structure. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.b65fbcdb9295.I2a64a6f1178ee0466755d728addc77acbb2ed6f4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: implement ROC version 3Shaul Triebitz
Define the new API for ROC command and notification. Use ROC version 3 command and notificaiton for hotspot. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.0cff02aecc16.If0a89ddc6b2339988ff51efa6709d4a883569969@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: send EDT table to FWAlon Giladi
Read the EDT (Energy detection threshold) optimization configuration table from BIOS using DSM Function and send it to FW. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.0b78ee48219a.I8ecbd39d258e2ee0514a7e28632f6c18fb798a83@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Fix key flags for IGTK on AP interfaceIlan Peer
When an IGTK is installed for an AP interface, there is no station associated with it. However, the MFP flag must be set for the installed key as otherwise the FW wouldn't use it. Fix the security key flag to set the MFP flag also when the AP is an AP interface and the key index matches that of an IGTK. Fixes: 5c75a208c244 ("wifi: iwlwifi: mvm: support new key API") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.f67005e2d4d2.I6832c6e87f3c79fff00689eb10a3a30810e1ee83@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlmvm: fw: Add new OEM vendor to tas approved listMatt Chen
Add new oem/odm pair to tas approved vendors list when specified by platform. Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.a6f10aaae473.I65c3321535674bbc08d96200961a78fab5e7a09f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Fix unreachable code pathIlan Peer
Fix unreachable code path that was introduced in the P2P Device linking refactoring. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231011130030.39d76eeea781.I2dc1fc6152a2cd4cf68827f4d3bf83e2293d3dfb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: fw: increase fw_version string sizeGregory Greenman
In reality 64 bytes are enough to hold fw version string, but some compilers can complain (with W=1) that output may be truncated when building this string with snprintf. Increase the size to avoid this sort of warnings and state explicitely that we want the size to be trancated to 32 bytes. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Tested-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20231012153950.f4465b4b4e2b.Idced2e8d63c492872edcde1a3ce2cdd6cc0f8eb7@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Correctly set link configurationIlan Peer
In case the link puncturing is changed such that the channel is no longer punctured, configure the FW correctly indicating the EHT parameters changed (with a 0 punctured map). Allow EHT parameters configuration only when the link really supports EHT. Fixes: 55eb1c5fa4b2 ("wifi: iwlwifi: mvm: add support for the new LINK command") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.2666ef86e032.I4b0e95722660acc5345ceefba7e8866a69572e8e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Don't always bind/link the P2P Device interfaceIlan Peer
It is not necessary to keep the P2P Device bound/linked to a PHY context when there is no active ROC. Modify the P2P Device flows so the binding/linking would be done only while ROC is active. With this change the switch_phy_ctxt() is no longer needed so remove it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c5b83b4bf9de.Ia80daf3ba0b5fec7d0919247fcbdbdb58bddf02b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: add start mac ctdp sum calculation debugfs handleriallouch
mac_ctdp_sum contains the power consumption, appears in power save report, and is used for debugging and collection of statistics. Add a debugfs handler to start this calculation, iff ctdp command is supported in the firmware. While on it, add an option to force start/stop this calculation, which is safe from the firmware API side. Signed-off-by: iallouch <itai.allouche@intel.com> Signed-off-by: Nitsan Bar <nitsan.bar@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.024d75df9e03.I69fdc826f2931a6e1435b450f0602ea060704697@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: abort scan when rfkill on but device enabledMiri Korenblit
In RFKILL we first set the RFKILL bit, then we abort scan (if one exists) by waiting for the notification from FW and notifying mac80211. And then we stop the device. But in case we have a scan ongoing in the period of time between rfkill on and before the device is stopped - we will not wait for the FW notification because of the iwl_mvm_is_radio_killed() condition, and then the scan_status and uid_status are misconfigured, (scan_status is cleared but uid_status not) and when the notification suddenly arrives (before stopping the device) we will get into the assert about scan_status and uid_status mismatch. Fix this by waiting for FW notif when rfkill is on but the device isn't disabled yet. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.c43b69aa2c77.Icc7b5efb47974d6f499156ff7510b786e177993b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: Add basic link selection logicIlan Peer
Add simple logic that would allow using EMLSR in case there are multiple valid links: - In case the connection establishment has just been completed try to find a valid link pair for EMLSR functionality where one of the links in the pair is the current active link. - In case the valid links changed after connection was already established, try to find a valid link pair for EMLSR functionality, in case the EMSLR is not active yet. If a valid link pair is found call mac80211 to asynchronously set the new link pair, otherwise continue using the current active links. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.0c7b89ab29c2.I6600bd16551d75e2bf520d8d0add525568a9f85f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix SB CFG checkJohannes Berg
We shouldn't check the 0x10 bit here, since the register holds different values (not just bit masks.). Check for the exact value where this is needed only. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.ab21c7d5e219.I4f9906ebc7ecf38fd276510a276280a9261c8f7f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: add a per-link debugfsMiri Korenblit
Add a per-link debugfs entry in iwlmvm level so we can read/write link related parameters. Do it by implementing the link_add_debugfs API introduced by mac80211. Each entry will have a path like this: .../netdev:wlan0/link-X/iwlmvm/<file_name> for each link X. For non-MLD vifs this callback is called when the original vif debugfs dir is also created, so handle that case by not creating the 'iwlmvm' directory again. Note that we don't have to worry about the cleaning the iwlmvm/* directory as it is already done by mac80211 when removing the link (or netdev). Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.6a161f021ae8.Ic8f40f2b4682270c94036e3c11c3996ae34266fa@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: rework debugfs handlingJohannes Berg
mac80211 added a new callback to add a vif debugfs. Implement it instead of adding the debugfs directly, which will make it properly preserved over switching the vif from non-MLD/MLD and back. This requires some rework so that we still have the symlink but trust mac80211 to add/remove the debugfs. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231004123422.818810e242e6.I805a28f9fbef5c52a3a575d04e7a6a909ecf9078@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: mac80211: make mgd_protect_tdls_discover MLO-awareMiri Korenblit
Since userspace can choose now what link to establish the TDLS on, we should know on what channel to do session protection. Add a link id parameter to this callback. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230928172905.ef12ce3eb835.If864f406cfd9e24f36a2b88fd13a37328633fcf9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: mac80211: Rename and update IEEE80211_VIF_DISABLE_SMPS_OVERRIDEIlan Peer
EMLSR operation and SMPS operation cannot coexist. Thus, when EMLSR is enabled, all SMPS signaling towards the AP should be stopped (it is expected that the AP will consider SMPS to be off). Rename IEEE80211_VIF_DISABLE_SMPS_OVERRIDE to IEEE80211_VIF_EML_ACTIVE and use the flag as an indication from the driver that EMLSR is enabled. When EMLSR is enabled SMPS flows towards the AP MLD should be stopped. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230928172905.fb2c2f9a0645.If6df5357568abd623a081f0f33b07e63fb8bba99@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: use correct sta ID for IGTK/BIGTKJohannes Berg
We don't (yet) send the IGTK down to the firmware, but when we do it needs to be with the broadcast station ID, not the multicast station ID. Same for the BIGTK, which we may send already if firmware advertises it (but it doesn't yet.) Fixes: a5de7de7e78e ("wifi: iwlwifi: mvm: enable TX beacon protection") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926110319.dbc653913353.I82e90c86010f0b9588a180d9835fd11f666f5196@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: offload IGTK in AP if BIGTK is supportedJohannes Berg
We can't really know easily if a BIGTK will be used, but in case firmware supports BIGTK it also supports the very easy IGTK use (nothing to do on the host), and requires that we program both IGTK and BIGTK to be able to use the BIGTK. Thus, change the condition here to set the keys in firmware (both IGTK/BIGTK) if BIGTK is supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926110319.425ebc1ce484.If485ec962636c23d463b678e7da86e11b6fa86c9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: fix removing pasn station for responderAvraham Stern
In case of MLD operation the station should be removed using the mld api. Fixes: fd940de72d49 ("wifi: iwlwifi: mvm: FTM responder MLO support") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926110319.7eb353abb95c.I2b30be09b99f5a2379956e010bafaa465ff053ba@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: iwlwifi: mvm: update station's MFP flag after associationAvraham Stern
The management frames protection flag is always set when the station is not yet authorized. However, it was not cleared after association even if the association did not use MFP. As a result, all public action frames are not parsed by fw (which will cause FTM to fail, for example). Update the station MFP flag after the station is authorized. Fixes: 4c8d5c8d079e ("wifi: iwlwifi: mvm: tell firmware about per-STA MFP enablement") Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926110319.2488cbd01bde.Ic0f08b7d3efcbdce27ec897f84d740fec8d169ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-06Merge wireless into wireless-nextJohannes Berg
Resolve several conflicts, mostly between changes/fixes in wireless and the locking rework in wireless-next. One of the conflicts actually shows a bug in wireless that we'll want to fix separately. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org>
2023-09-27wifi: iwlwifi: mvm: Fix incorrect usage of scan APIIlan Peer
The support for using link ID in the scan request API was only added in version 16. However, the code wrongly enabled this API usage also for older versions. Fix it. Reported-by: Antoine Beaupré <anarcat@debian.org> Fixes: e98b23d0d7b8 ("wifi: iwlwifi: mvm: Add support for SCAN API version 16") Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230926165546.086e635fbbe6.Ia660f35ca0b1079f2c2ea92fd8d14d8101a89d03@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: check for iwl_mvm_mld_update_sta() errorsJohannes Berg
The return value of this function is assigned, but then unused. Check for errors here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110727.a9496c232d48.I74adaa8f3c6fd3252348e79f18605246936ef27d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: support injection antenna controlJohannes Berg
Pull up the injection rate control one layer, and let it control the antenna settings as well. Since mac80211 has already checked that enough antennas are configured, and we only have two bits, it's enough to just copy the data over. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110727.12ab7634dbbc.I5aa16c99864ecd7375011a8996de2564fd01fc30@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: refactor TX rate handlingJohannes Berg
Refactor the injection and other frame TX rate handling to always return the injection rate directly, by factoring the legay rate portion out into a new function called in the two relevant places (injection and non-injection). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110727.dc920357bad0.I5ee8512fb63f0423c1da35b59fea8811d60c1ad3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: make pldr_sync AX210 specificJohannes Berg
The register here is device specific, so we need to gate the reading/checking to apply only on AX210 family. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110726.928901700ad8.I648efdc4400d9e537359915a9a8f363d5d255ead@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: add support for new wowlan_info_notifYedidya Benshimol
This new version of wolan_info_notif supports the handling of bigtk during d3, this patch holds parsing of the new notif version, adding new keys and updating ipn of existing keys during the resume flow. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110726.4ebcd244f436.Ib507573d50fa0ac666d09ab71f5241ccbcd7cd00@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: handle link-STA allocation in restartJohannes Berg
During HW restart, STA link changes happen while the link-sta is already allocated (had been prior to the restart). Adjust the allocation and checks to handle that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110726.99b7cc754b00.Iaa0503a3100250489fed8b4bdcf60e24a96d3392@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: iterate active links for STA queuesJohannes Berg
During HW restart in eSR, links allocated in a station and links active in the interface may differ. Use for_each_sta_active_link to capture this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110726.7ee1f1a55e1c.I410c512d1fad7d1cf9b2d2a3451a312821dc816d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-25wifi: iwlwifi: mvm: support set_antenna()Emmanuel Grumbach
set_antenna() is supported only when the device is not started in mac80211 which translates to the firmware not being loaded in iwlwifi. The tricky part is that iwlwifi populates the sband data during its boot and doesn't touch this data afterwards, but if the antenna settings forbid MIMO, we need to update the sband data. Rework the nvm parsing code to allow to get an existing nvm_data and modify the sband with additional constraints (tx / rx chains masks). Suggested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230921110726.81d94d630c95.I9473da818cbeeb51b2f89dcc59b00019113e7f55@changeid [add bugfix from Benjamin for iwl_mvm_get_valid_rx_ant()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: mvm: add a debug print when we get a BAREmmanuel Grumbach
Getting a BAR can be an explanation if we're chasing packet loss. Add a print with the relevant debug level in that code path. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.913e989a1751.I6bff9020e339d91b61b5ad6aede27bcf8c7e6819@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: mvm: move listen interval to constantsJohannes Berg
This can be moved to constants, while at it also rename it to have a better name with MVM_ prefix. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.59823deebfda.Ied68b11ca40771d1cfc8c82ee8f9f2b9ea27da65@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: no power save during transition to D3Miri Korenblit
Transition to d3 is much faster if there is no power save during the transition. Therefore a new flag was added to the device power cmd to indicate the power save isn't allowed until the transition is completed. Set this flag in _iwl_mvm_suspend, when the transition begins. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.ced036106507.Ib5ed5a47ee35f624902bd8882dde3e559285965b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: mvm: fix recovery flow in CSAEmmanuel Grumbach
If the firmware crashes in the de-activation / re-activation of the link during CSA, we will not have a valid phy_ctxt pointer in mvmvif. This is a legit case, but when mac80211 removes the station to cleanup our state during the re-configuration, we need to make sure we clear ap_sta otherwise we won't re-add the station after the firmware has been restarted. Later on, we'd activate the link, try to send a TLC command crash again on ASSERT 3508. Fix this by properly cleaning up our state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.2651e6f6a55a.I4cd50e88ee5c23c1c8dd5b157a800e4b4c96f236@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: Use FW rate for non-data framesMiri Korenblit
Currently we are setting the rate in the tx cmd for mgmt frames (e.g. during connection establishment). This was problematic when sending mgmt frames in eSR mode, as we don't know what link this frame will be sent on (This is decided by the FW), so we don't know what is the lowest rate. Fix this by not setting the rate in tx cmd and rely on FW to choose the right one. Set rate only for injected frames with fixed rate, or when no sta is given. Also set for important frames (EAPOL etc.) the High Priority flag. Fixes: 055b22e770dd ("iwlwifi: mvm: Set Tx rate and flags when there is not station") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.6c7e59620ee0.I6eaed3ccdd6dd62b9e664facc484081fc5275843@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: mvm: enable FILS DF Tx on non-PSC channelShaul Triebitz
If the channel bandwidth is greater or equal than 80MHz, enable FILS DF transmittion, even if the control channel is non-PSC. That's because that in 80MHz there must be a sub 20MHz PSC channel, and since the FILS DF is duplicated on all sub 20MHz channels, within the 80MHz (hence it will be sent on a PSC channel). Also, if FILS DF Tx is enabled, always configure the firmware with the actual channel bandwidth, even before there is a connected client (rather than the minimum bandwidth e.g. 20MHz), since FILS DF transmission on a PSC channel take presedent over power consumption. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.83b9a76fc6c4.I6703111cc6befcd0e9cd9adf3cb127a648dbb7b1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: mvm: make "pldr_sync" mode effectiveJohannes Berg
If the device initialized with ME active, this would indeed work, since the NVM information would be obtained from ME. However, in the much more likely case that ME isn't active and the firmware takes actions requiring the sync, this was not working correctly when the firmware is only run at init to obtain NVM data, since mac80211 isn't even initialized. Fix this by moving the 'pldr_sync' handling to a different place. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.45a94d480e56.Id9277f1df6a63ab0dfca0d0c0f448c759e1b8e73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: mvm: log dropped framesEmmanuel Grumbach
When we drop frames we want to have something printed in the logger. This won't be printed by default of course. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.c2f02fecf66f.Ib472f9fd92856c6e5b5a99b68fdca0f694a531e9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: iwlwifi: fw: disable firmware debug assertsGregory Greenman
Disable firmware debug asserts, which are used for internal firmware testing purposes only. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230913145231.8feafd9b17be.Ia7bec82ac25897caab581692d67055aa1aca2ed2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: mvm: Fix a memory corruption issueChristophe JAILLET
A few lines above, space is kzalloc()'ed for: sizeof(struct iwl_nvm_data) + sizeof(struct ieee80211_channel) + sizeof(struct ieee80211_rate) 'mvm->nvm_data' is a 'struct iwl_nvm_data', so it is fine. At the end of this structure, there is the 'channels' flex array. Each element is of type 'struct ieee80211_channel'. So only 1 element is allocated in this array. When doing: mvm->nvm_data->bands[0].channels = mvm->nvm_data->channels; We point at the first element of the 'channels' flex array. So this is fine. However, when doing: mvm->nvm_data->bands[0].bitrates = (void *)((u8 *)mvm->nvm_data->channels + 1); because of the "(u8 *)" cast, we add only 1 to the address of the beginning of the flex array. It is likely that we want point at the 'struct ieee80211_rate' allocated just after. Remove the spurious casting so that the pointer arithmetic works as expected. Fixes: 8ca151b568b6 ("iwlwifi: add the MVM driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/23f0ec986ef1529055f4f93dcb3940a6cf8d9a94.1690143750.git.christophe.jaillet@wanadoo.fr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: Ensure ack flag is properly cleared.Ben Greear
Debugging indicates that nothing else is clearing the info->flags, so some frames were flagged as ACKed when they should not be. Explicitly clear the ack flag to ensure this does not happen. Signed-off-by: Ben Greear <greearb@candelatech.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230808205605.4105670-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: mvm: reduce maximum RX A-MPDU sizeJohannes Berg
Since 1024 isn't being tested right now, allow only 512 for now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230830112059.6e80366716ad.I19022084ac978b9960b12b205c052a83ab141203@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: mvm: check link more carefullyJohannes Berg
Some cases of restart crashing here have been reported, while we figure out where this is going wrong, check the link more carefully to avoid the crash. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230830112059.2b81f52ce18e.I8f3b1962013107e2d7491d817c3349359341c6ee@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: mvm: move RU alloc B2 placementJohannes Berg
The firmware was trying to report the B2 RU allocation in the place previously used here as well, but there's a HW block that clears the lower 8 bits in this metadata word even in sniffer mode. Thus, firmware moved B2 to another place, follow that. There's no need to detect the version since moving it to the other place if firmware didn't just means that we'll continue to report the (erroneous) zero value, and it's not really something we can detect from the firmware now. While debugging this we realized that the comments about placement in the metadata dwords are wrong, update them. Reported-by: Youhan Kim <youhank@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230830112059.dec7f1e07ff8.I623fee2d710cc7b6f392d65b708883ed58632b45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: iwlwifi: mvm: fix kernel-docJohannes Berg
Fix kernel-doc, adding various documentation, but in some cases (notably rate scaling) just removing the erroneous comment format. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230830112059.4ce1159b51ab.I2021ae335f6b8e50ee2c1c78a79c5eac1c1aa103@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 03:26:26 +0000