summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm
AgeCommit message (Collapse)Author
2018-08-02iwlwifi: hard code power save mode to CAM for 22560 devicesGolan Ben Ami
Balanced power save mode isn't supported in the fw for 22560 devices yet. Configure the power save mode to CAM until it gets implemented. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02Revert "iwlwifi: implement fseq version mismatch warning"Sara Sharon
This reverts commit f2e66c8df0d0f10c70ed7f5e14a939714e9ee6a9. The firmware never implemented this, and they do not plan to. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: mvm: configure multi RX queueSara Sharon
Currently multi-queue is disabled for 22000 devices. This was since driver isn't supposed to write to prph registers anymore, and FW needs to configure the RFH. Now that FW added support for the API - use it and remove the 22000 multi RX queue disablement. Bump min API version to avoid compatibility issues. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: d3: disable dbg recording before entering D3Luca Coelho
Currently the firmware does not stop recording debugging data when entering D3 and this causes trouble (e.g. sporadic wake ups). Fix that by stopping dbg recording when suspending. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: allow masking out memory areas from the fw dumpShahar S Matityahu
Reading and dumping memory areas takes time, and sometimes dumping all of the areas isn't necessary. Allow choosing the memory areas which should be dumped. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: support new rx_mpdu_desc apiGolan Ben Ami
22560 devices use a new rx_mpdu_desc api. Update the code to use the new api. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: pcie: support 2k rx buffersGolan Ben Ami
The smallest rb size supported today is 4k rx buffers. 22560 devices use 2k rxb's, so allow using 2k buffers. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: support new tx apiGolan Ben Ami
22560 devices use a new tx cmd api. Update the code to use the new api. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: pcie: update bytes in the byte count tableGolan Ben Ami
For devices which use the image loader image, the length of the frame must be updated in the byte count in bytes, and not dwords as today. Avoid dividing the input length by 4. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: introduce device family 22560Golan Ben Ami
Device 22560 have many different hw and sw features than 22000 family, so introduce a new family of devices - 22560. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: mvm: add radiotap data for HELuca Coelho
Add HE information to the radiotap data. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add module parameter to disable 802.11axLuca Coelho
Add a module parameter to disable 802.11ax features in supported devices. This is useful for testing or if there are interoperability issues with some APs. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add support for IEEE802.11axLuca Coelho
Add support for the HE in the iwlwifi driver conforming with P802.11ax_D2.0. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-06-27wireless-drivers: use BIT_ULL for NL80211_STA_INFO_ attribute typesOmer Efrat
The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in wireless-drivers by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat <omer.efrat@tandemg.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-03Merge tag 'wireless-drivers-next-for-davem-2018-05-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.18 Hopefully the last pull request to 4.18 before the merge window. Nothing major here, we have smaller new features and of course a lots of fixes. Major changes: ath10k * add memory dump support for QCA9888 and QCA99X0 * add support to configure channel dwell time * support new DFS host confirmation feature in the firmware ath * update various regulatory mappings wcn36xx * various fixes to improve reliability * add Factory Test Mode support brmfmac * add debugfs file for reading firmware capabilities mwifiex * support sysfs initiated device coredump ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30iwlwifi: mvm: fix race in queue notification waitJohannes Berg
Initially in this code, the race didn't matter since it didn't do anything. Latest with the commit I marked this as fixing it started to matter as something got done here that needed other data that got freed as soon as the queue notification wait was returning. In the scenario we saw, apparently the IWL_MVM_RXQ_NOTIF_DEL_BA event was sent to all queues, but processing the last event we returned from iwl_mvm_sync_rx_queues_internal() and then from iwl_mvm_free_reorder() and continued some processing before wl_mvm_del_ba() was even invoked on the other CPU. Thus, when the latter finally ran, it found that mvm->baid_map[baid] was no longer valid. Correct the race by moving the counter decrement and wake_up() to be done only after all the per-event processing completed. Note that in the commit I marked as being fixed the wake_up() didn't exist yet (and the code was otherwise problematic) but this particular problem already existed in a way. Fixes: b915c10174fb ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: honor the max_amsdu_subframes limitEmmanuel Grumbach
A peer can limit the number of subframes it can handle in a single A-MSDU. Honor this limit. Note that the smallest limit is 8, and we are very unlikely to reach that limit. So this isn't really a big deal. Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: open BA session only when sta is authorizedGregory Greenman
Currently, a BA session is opened when the tx traffic exceeds 10 frames per second. As a result of inter-op problems with some APs, add a condition to open BA session only when station is already authorized. Fixes: 482e48440a0e ("iwlwifi: mvm: change open and close criteria of a BA session") Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: fix TSO with highly fragmented SKBsEmmanuel Grumbach
Our hardware has a limited amount of buffer descriptors for each Tx packet. Because of that, there is a short piece of code that makes sure that that we don't push too many subframes in an A-MSDU because of subframes needs 2 buffer descriptors. This code also takes into account the number of fragment of the skb since we also need a buffer descriptor for each fragment in the skb. This piece of code though didn't check that the resulting number of subframes wasn't 0. A user reported that using NFS client, he could get skbs that are so fragmented that the code mentioned above returned 0 for the number of subframes making skb_gso_segment fail and subconsequently iwlwifi would WARN. Fix this by make sure that num_subframes is at least 1. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=199209 Fixes: a6d5e32f247c ("iwlwifi: mvm: send large SKBs to the transport") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlmvm: tdls: Check TDLS channel switch supportAviya Erenfeld
Some versions of the FW don't support channel switch in TDLS. Add a condition that checks it. Fixes: 307e47235a10 ("iwlwifi: mvm: configure TDLS peers to FW") Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-30iwlwifi: mvm: drop UNKNOWN security type framesSara Sharon
In some cases we may get from FW errored frames with UNKNOWN security type. This may happen in unsecured aggregation flow, where the first packet had a CRC error in the WEP bit, which was followed by a failure to decrypt and was dropped. The next frames in the aggregation "inherit" the bad metadata of the first packet. Make sure to drop such frames since RADA and other offloads will not operate correctly which may have unexpected results. In case of AP it also causes to TX AMSDU frames to the peers, resulting with assert 0x104B. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-05-23mac80211: Support adding duration for prepare_tx() callbackIlan Peer
There are specific cases, such as SAE authentication exchange, that might require long duration to complete. For such cases, add support for indicating to the driver the required duration of the prepare_tx() operation, so the driver would still be able to complete the frame exchange. Currently, indicate the duration only for SAE authentication exchange, as SAE authentication can take up to 2000 msec (as defined in IEEE P802.11-REVmd D1.0 p. 3504). As the patch modified the prepare_tx() callback API, also modify the relevant code in iwlwifi. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-04-26iwlwifi: mvm: set wakeup filters for wowlan "any" configurationEliad Peller
In case of "any" wowlan trigger is configured, no valid wakeup filter was configured. Moreover, the fw assumes there's no connection when there are no configured wakeup filters. This leads to the station info not being updated on D3 command, causing rate_n_flags to be 0 when the offloading code sends tx frame (triggering SYSASSERT_102C due to invalid antenna param) Note: "any" trigger is currently assumed to only be used when entering d0i3 (which has a different flow). However, we still reach this code when using d3_test. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: mvm: remove check for non low latency TIDsSara Sharon
Firmware will only send non low-latency TIDs in the bitmap, so the check is now redundant. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: mvm: move skb padding reservation earlierJohannes Berg
Future changes will require moving the HE radiotap data into the SKB head, but this means we need to have the alignment reservation done before that. To prepare, move the alignment reservation earlier here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: introduce Image Loader (IML) - new firmware imageGolan Ben-Ami
In future devices a new image will be introduced - IML. The IML, image loader, is loaded by the ROM, and as part of the new self-init flow, loads the rest of the firmware images to the device. Store the image, so the ROM can load it to the device. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
To fix a conflict reported by Stephen Rothwell <sfr@canb.auug.org.au>: Today's linux-next merge of the wireless-drivers-next tree got a conflict in: drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c between commit: 77e30e10ee28 ("iwlwifi: mvm: query regdb for wmm rule if needed") from the wireless-drivers tree and commits: 9c4f7d512740 ("iwlwifi: move all NVM parsing code to the common files") 4c625c564ba2 ("iwlwifi: get rid of fw/nvm.c") from the wireless-drivers-next tree.
2018-04-20iwlwifi: mvm: support 22000 HW opening agg before trafficLiad Kaufman
When trying to open aggregations on 22000 HW before traffic had actually passed, the driver will discover it is missing a queue to aggregate on. In such a case - allocate a queue. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: get rid of fw/nvm.cShaul Triebitz
There's already an opmode common file for nvm iwl-nvm-parse.c Move the content of fw/nvm.c to iwl-nvm-parse.c and delete fw/nvm.c. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: update rs-fw APINaftali Goldstein
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: set the MFP flag for keys that are used by MFP stationsEmmanuel Grumbach
22000 devices rely on this flag to install the key to the right queues. For earlier devices we didn't have a key / queue mapping and the key was sent along with the Tx command for each Tx hence the problem didn't arise. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: use the new get_tid functionSara Sharon
This saves some typing and is overall more readable. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: move all NVM parsing code to the common filesShaul Triebitz
Move all the NVM file handling code to iwl-nvm-parse.c where all this stuff belongs. This cleans up the MVM specific code and allows easier reuse by other opmodes if needed. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: use shorter queues for mgmt and auxilary queuesSara Sharon
In 22000 devices, aka gen2, the TFS is 256 bytes. In order to save memory, use shorter TX queue for aux and mgmt queues, since there isn't much traffic on them. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: add TX queue size parameter to TX queue allocationSara Sharon
As preparation for dynamic queue sizing, add a parameter of the TX queue size to the dynamic queue allocation op mode API. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: support offload of AMSDU rate controlGregory Greenman
Support the new APIs and activate AMSDU based on the offloaded TLC decisions. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: fix OOC priority in scansLuca Coelho
The code that sets the correct out-of-channel priority depending on the scan type was accidentally removed during a rebase. Add it back. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: clean up scan capability checksJohannes Berg
Introduce and use iwl_mvm_cdb_scan_api(), which checks the family. Most of this will go away once the 22000 firmware supports adaptive dwell, after which the V6 scan API won't be used, but the V3 scan *config* API will still need to be distinguished. In any case, this gets rid of the completely bogus has_new_tx_api() checks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: detect low latency and traffic load per bandSara Sharon
Detect low latency and traffic load per band. Add support for deciding on scan type and timings per band. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: detect U-APSD breaking aggregationJohannes Berg
Try to detect that the AP is not using aggregation even when there's enough traffic to make it worthwhile; if this is the case and U-APSD is enabled then assume the AP is broken (like so many) and doesn't enable aggregation when U-APSD is used. In this case, disconnect from the AP and blacklist U-APSD for a potential new connection to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: BT Coex - make the primary / secondary pick traffic awareEmmanuel Grumbach
The primary channel is the channel that will be untouched by BT. The secondary channel might be touched by BT. Hence, we want the primary to be the most active channel. To do so, use the TCM infrastructure. Since the BT keeps sending notifications, we can rely on them to trigger the check. Every 10 seconds, we will check what is the most active context and chose the right primary. We need to wait 10 seconds before we modify the settings because frequent changes in these settings can confuse BT. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: use TCM data to decide scan priorityLuca Coelho
The code for changing the scan priority is already implemented, but isn't yet in use. Now that TCM data is available, we can base the scan priority decision on the traffic load. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-20iwlwifi: mvm: add traffic condition monitoring (TCM)Luca Coelho
Traffic condition monitor gathers data about the traffic load and other conditions and can be used to make decisions regarding latency, throughput etc. This patch introduces the code and data structures to collect this data for future use. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-09iwlwifi: mvm: query regdb for wmm rule if neededHaim Dreyfuss
Since our device is regulatory self managed it maintains its regulatory rules by its own. However the wmm_rules values can't be set by the device itself but only the indication about the need to set it. In case the device set wmm indication, proactively query the regulatory data base to get these values Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-03-31 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add raw BPF tracepoint API in order to have a BPF program type that can access kernel internal arguments of the tracepoints in their raw form similar to kprobes based BPF programs. This infrastructure also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which returns an anon-inode backed fd for the tracepoint object that allows for automatic detach of the BPF program resp. unregistering of the tracepoint probe on fd release, from Alexei. 2) Add new BPF cgroup hooks at bind() and connect() entry in order to allow BPF programs to reject, inspect or modify user space passed struct sockaddr, and as well a hook at post bind time once the port has been allocated. They are used in FB's container management engine for implementing policy, replacing fragile LD_PRELOAD wrapper intercepting bind() and connect() calls that only works in limited scenarios like glibc based apps but not for other runtimes in containerized applications, from Andrey. 3) BPF_F_INGRESS flag support has been added to sockmap programs for their redirect helper call bringing it in line with cls_bpf based programs. Support is added for both variants of sockmap programs, meaning for tx ULP hooks as well as recv skb hooks, from John. 4) Various improvements on BPF side for the nfp driver, besides others this work adds BPF map update and delete helper call support from the datapath, JITing of 32 and 64 bit XADD instructions as well as offload support of bpf_get_prandom_u32() call. Initial implementation of nfp packet cache has been tackled that optimizes memory access (see merge commit for further details), from Jakub and Jiong. 5) Removal of struct bpf_verifier_env argument from the print_bpf_insn() API has been done in order to prepare to use print_bpf_insn() soon out of perf tool directly. This makes the print_bpf_insn() API more generic and pushes the env into private data. bpftool is adjusted as well with the print_bpf_insn() argument removal, from Jiri. 6) Couple of cleanups and prep work for the upcoming BTF (BPF Type Format). The latter will reuse the current BPF verifier log as well, thus bpf_verifier_log() is further generalized, from Martin. 7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read and write support has been added in similar fashion to existing IPv6 IPV6_TCLASS socket option we already have, from Nikita. 8) Fixes in recent sockmap scatterlist API usage, which did not use sg_init_table() for initialization thus triggering a BUG_ON() in scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and uses a small helper sg_init_marker() to properly handle the affected cases, from Prashant. 9) Let the BPF core follow IDR code convention and therefore use the idr_preload() and idr_preload_end() helpers, which would also help idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory pressure, from Shaohua. 10) Last but not least, a spelling fix in an error message for the BPF cookie UID helper under BPF sample code, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28net/wireless/iwlwifi: fix iwlwifi_dev_ucode_error tracepointAlexei Starovoitov
fix iwlwifi_dev_ucode_error tracepoint to pass pointer to a table instead of all 17 arguments by value. dvm/main.c and mvm/utils.c have 'struct iwl_error_event_table' defined with very similar yet subtly different fields and offsets. tracepoint is still common and using definition of 'struct iwl_error_event_table' from dvm/commands.h while copying fields. Long term this tracepoint probably should be split into two. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-09-11 12:04:53 +0000