summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi
AgeCommit message (Collapse)Author
2020-05-07Merge tag 'wireless-drivers-next-2020-05-07' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.8 First set of patches for v5.8. Changes all over, ath10k apparently seeing most new features this time. rtw88 also had lots of changes due to preparation for new hardware support. In this pull request there's also a new macro to include/linux/iopoll: read_poll_timeout_atomic(). This is needed by rtw88 for atomic polling. Major changes: ath11k * add debugfs file for testing ADDBA and DELBA * add 802.11 encapsulation offload on hardware support * add htt_peer_stats_reset debugfs file ath10k * enable VHT160 and VHT80+80 modes * enable radar detection in secondary segment * sdio: disable TX complete indication to improve throughput * sdio: decrease power consumption * sdio: add HTT TX bundle support to increase throughput * sdio: add rx bitrate reporting ath9k * improvements to AR9002 calibration logic carl9170 * remove buggy P2P_GO support p54usb * add support for AirVasT USB stick rtw88 * add support for antenna configuration ti wlcore * add support for AES_CMAC cipher iwlwifi * support for a few new FW API versions * new hw configs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24Merge tag 'mac80211-for-net-2020-04-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just three changes: * fix a wrong GFP_KERNEL in hwsim * fix the debugfs mess after the mac80211 registration race fix * suppress false-positive RCU list lockdep warnings ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-24iwlwifi: debug: set NPK buffer in context infoGil Adam
When buffer destination for ini debug is configured to NPK (TB22DTF) set the appropriate bit in the context info struct. Signed-off-by: Gil Adam <gil.adam@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.3c9f0fa6033f.Id1d6c191f85efe0d6cf35434bfb186ffd46ff64c@changeid
2020-04-24iwlwifi: pcie: add new structs for So devices with long latencyLuca Coelho
Some So devices have a longer wake latency. To support this properly, add new cfg structs for them so the driver will inform the FW about the need to use another xtal and use a higher wait value during state transitions. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.daf515618f57.I80e60006b108e1586e3c56669635c670597fe08d@changeid
2020-04-24iwlwifi: pcie: add new structure for Qu devices with medium latencyLuca Coelho
Some Qu devices require an intermediate amount of time to wake up and for LTR notifications, so add a new structure with the correct values for them and change the corresponding devices to use it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.d6df2bcee78f.Ie008b0c8f03340a466c1ef981bfd25359c9de90d@changeid
2020-04-24iwlwifi: mvm: tell firmware about required LTR delayJohannes Berg
Some (integrated) devices need a longer LTR delay than the firmware would typically apply, tell it about that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.24276ae2ad61.I8831a538f75893d5cee47b4a81f4b9b7fd0e8bea@changeid
2020-04-24iwlwifi: update few product names in AX familyIhab Zhaika
update the product names of few structs in AX family. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.738dabad8732.I5673eaf8a016b8aa27ab8bab02121108fa723783@changeid
2020-04-24iwlwifi: pcie: add cfgs for SoCs with device ID 0x4FD0Luca Coelho
A new device ID needs to be added to the list to support new SoCs. Add it and support all subsystem IDs that other Qu devices support. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5e5ce668ff8b.I20a9c8b3470aaabaa54361a5641637e5a14d8321@changeid
2020-04-24iwlwifi: add new cards for AX familyIhab Zhaika
add few PCI ID'S for AX family. Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.5eae2261b70c.I0369619a562c4e4008e2f0a3afb9ed5d4c9b49d4@changeid
2020-04-24iwlwifi: acpi: read TAS table from ACPI and send it to the FWMordechay Goodstein
Read the Time Averaged SAR (TAS) table from ACPI and if TAS feature is enabled in the FW send the black list countries which TAS is disabled in to the FW Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.40a327d32cfd.I7203f3afc8186cca34c48a1a116baac1df5eff4e@changeid
2020-04-24iwlwifi: remove fw_monitor module parameterEmmanuel Grumbach
This module parameter is no longer useful now that other debug infrastructure was added to iwlwifi. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.03bd49c3432b.Ie62047d3b364b19c8c3584ea37790220466f2a8d@changeid
2020-04-24iwlwifi: remove deprecated and unused iwl_mvm_keyinfo structLuca Coelho
This struct hasn't been used in years and is just a remnant of an API support removal that missed this structured. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.93860da2d12a.Ifeca3b3313e3f14330317bc3e3d62f7d991ec955@changeid
2020-04-24iwlwifi: mvm: add framework for specific phy configurationGil Adam
Add framework for supporting specific PHY filter configuration, which allows for application of various FW defined PHY filters (one per antenna). Change phy_cfg_cmd to the new API (ver3). Reading of configuration from platform's ACPI tables to be added later when tables are defined. Signed-off-by: Gil Adam <gil.adam@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.242a8f979592.I13c77a8a8dbf1a169b5052c7af1f8401ff3991ad@changeid
2020-04-24iwlwifi: pcie: move iwl_pcie_ctxt_info_alloc_dma() to userJohannes Berg
There's no need for this to be an inline in the header file, only the context-info.c file ever uses it. Move it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200418110539.818a06457888.Ib4f55280cd14d7edab37f2992b381c9b6ca4cd7a@changeid
2020-04-24iwlwifi: yoyo: support IWL_FW_INI_TIME_POINT_HOST_ALIVE_TIMEOUT time pointShahar S Matityahu
Allow the driver to perform dump collection in case of alive notification timeout in yoyo mode. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.bd46e6240590.Ibda6d9d330a1ae49670152cede34629b280f6cf9@changeid
2020-04-24iwlwifi: mvm: add DCM flag to rate pretty-printJohannes Berg
It's useful to know if DCM was enabled, add this flag to the rate pretty-printer. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.891bb9741eca.Ia66448f7e00be9e4c9ea7147b90d4fcd5f1d3845@changeid
2020-04-24iwlwifi: pcie: gen2: minor code cleanups in byte table updateJohannes Berg
One line should be indented less, otherwise it looks like it belongs into the parentheses, which clearly it doesn't; also some variables can move into their respective if branches. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.a4858aa0441b.I0e70e4a5493fe6b8db6390f9349ff0e7888ab240@changeid
2020-04-24iwlwifi: pcie: add n_window/ampdu to tx_queue debugfsJohannes Berg
Add the n_window and ampdu parameters so we can see them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.a2cc1f36008f.Iea23802bb64a08de410223e9af4431dfcadf121b@changeid
2020-04-24iwlwifi: pcie: use seq_file for tx_queue debugfs fileJohannes Berg
On newer hardware, the tx_queue debugfs file would need to allocate 37.5kib data since there are 512 queues, which is too much. Rather than resorting to kludges like kvmalloc(), use the seq_file API to print out the data. While at it, also fix a NULL pointer dereference here, the txq pointer from trans_pcie->txqs[] may be NULL if that queue hasn't been allocated. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.491cf8224c49.I7f154d81e5becef3b5ff22d7c6e36170bde0d7d5@changeid
2020-04-24iwlwifi: support version 9 of WOWLAN_GET_STATUS notificationMordechay Goodstein
Add support for the new WOWLAN_GET_STATUS notification that contains a new element that informs the driver of TIDs whose BA sessions were closed during suspend. Note that the new functionality of handling these closed sessions is not implemented in this patch it. It only aligns to the new API version. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.b02153b94c1d.Ieb6291586d60f372d5a505604b18227ef97e7202@changeid
2020-04-24iwlwifi: dbg: support multiple dumps in legacy dump flowShahar S Matityahu
Support multiple debug data collection triggers in legacy flow. Utilize the already existing Yoyo infra so the change is rather simple. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.5be6a1923cbe.I10701236b03f66328041f2a38f5f0f22a26fd40b@changeid
2020-04-24iwlwifi: move API version lookup to common codeMordechay Goodstein
The API version lookup is parsed from a TLV and should be in shared code make make it reusable across all opmodes. Also change the function names from mvm to fw, since this is not mvm-specific anymore. Additionally, since this function is not just a single line of code, it shouldn't be inline. Convert them to actual functions. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200421133326.cf94672dfcdb.I5ede9cc25ee8de7b8d2b5c574f917a18971da734@changeid
2020-04-24iwlwifi: nvm: use iwl_nl80211_band_from_channel_idxTova Mussai
Use iwl_nl80211_band_from_channel_idx in iwl_parse_nvm_mcc_info Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.a64a018f244e.Ie75ac5bb0f0f524d26944800138855ef2228339a@changeid
2020-04-24mac80211: implement Operating Mode Notification extended NSS supportJohannes Berg
Somehow we missed this for a long time, but similar to the extended NSS support in VHT capabilities, we need to have this in Operating Mode notification. Implement it by * parsing the 160/80+80 bit there and setting the bandwidth appropriately * having callers of ieee80211_get_vht_max_nss() pass in the current max NSS value as received in the operating mode notification in order to modify it appropriately depending on the extended NSS bits. This updates all drivers that use it, i.e. only iwlwifi/mvm. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200326150855.098483728cfa.I4e8c25d3288441759c2793247197229f0696a37d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-24iwlwifi: scan: remove support for fw scan api v13Tova Mussai
The fw already supports scan api v14 and the firmware version that supports only v13 was not published, so we can remove support for v13 in the driver. Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200417131727.11883315579a.I4f59100e457c1079c5e4c90e4930d1fa62b7ddd7@changeid
2020-04-24mac80211: populate debugfs only after cfg80211 initJohannes Berg
When fixing the initialization race, we neglected to account for the fact that debugfs is initialized in wiphy_register(), and some debugfs things went missing (or rather were rerooted to the global debugfs root). Fix this by adding debugfs entries only after wiphy_register(). This requires some changes in the rate control code since it currently adds debugfs at alloc time, which can no longer be done after the reordering. Reported-by: Jouni Malinen <j@w1.fi> Reported-by: kernel test robot <rong.a.chen@intel.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Felix Fietkau <nbd@nbd.name> Cc: stable@vger.kernel.org Fixes: 52e04b4ce5d0 ("mac80211: fix race in ieee80211_register_hw()") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Sumit Garg <sumit.garg@linaro.org> Link: https://lore.kernel.org/r/20200423111344.0e00d3346f12.Iadc76a03a55093d94391fc672e996a458702875d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-04-21iwlwifi: fix WGDS check when WRDS is disabledLuca Coelho
In the reference BIOS implementation, WRDS can be disabled without disabling WGDS. And this happens in most cases where WRDS is disabled, causing the WGDS without WRDS check and issue an error. To avoid this issue, we change the check so that we only considered it an error if the WRDS entry doesn't exist. If the entry (or the selected profile is disabled for any other reason), we just silently ignore WGDS. Cc: stable@vger.kernel.org # 4.14+ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205513 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417133700.72ad25c3998b.I875d935cefd595ed7f640ddcfc7bc802627d2b7f@changeid
2020-04-21iwlwifi: mvm: fix inactive TID removal return value usageJohannes Berg
The function iwl_mvm_remove_inactive_tids() returns bool, so we should just check "if (ret)", not "if (ret >= 0)" (which would do nothing useful here). We obviously therefore cannot use the return value of the function for the free_queue, we need to use the queue (i) we're currently dealing with instead. Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.9d862ed72535.I9e27ccc3ee3c8855fc13682592b571581925dfbd@changeid
2020-04-21iwlwifi: mvm: Do not declare support for ACK Enabled AggregationIlan Peer
As this was not supposed to be enabled to begin with. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.53dbc3c6c36b.Idfe118546b92cc31548b2211472a5303c7de5909@changeid
2020-04-21iwlwifi: mvm: limit maximum queue appropriatelyJohannes Berg
Due to some hardware issues, queue 31 isn't usable on devices that have 32 queues (7000, 8000, 9000 families), which is correctly reflected in the configuration and TX queue initialization. However, the firmware API and queue allocation code assumes that there are 32 queues, and if something actually attempts to use #31 this leads to a NULL-pointer dereference since it's not allocated. Fix this by limiting to 31 in the IWL_MVM_DQA_MAX_DATA_QUEUE, and also add some code to catch this earlier in the future, if the configuration changes perhaps. Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.98a79be2db6a.I3a4af6b03b87a6bc18db9b1ff9a812f397bee1fc@changeid
2020-04-21iwlwifi: pcie: indicate correct RB size to deviceJohannes Berg
In the context info, we need to indicate the correct RB size to the device so that it will not think we have 4k when we only use 2k. This seems to not have caused any issues right now, likely because the hardware no longer supports putting multiple entries into a single RB, and practically all of the entries should be smaller than 2k. Nevertheless, it's a bug, and we must advertise the right size to the device. Note that right now we can only tell it 2k vs. 4k, so for the cases where we have more, still use 4k. This needs to be fixed by the firmware first. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: cfdc20efebdc ("iwlwifi: pcie: use partial pages if applicable") Cc: stable@vger.kernel.org # v5.6 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.ae6cd345764f.I0985c55223decf70182b9ef1d8edf4179f537853@changeid
2020-04-21iwlwifi: mvm: beacon statistics shouldn't go backwardsMordechay Goodstein
We reset statistics also in case that we didn't reassoc so in this cases keep last beacon counter. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.1f9142751fbc.Ifbfd0f928a0a761110b8f4f2ca5483a61fb21131@changeid
2020-04-21iwlwifi: pcie: actually release queue memory in TVQMJohannes Berg
The iwl_trans_pcie_dyn_txq_free() function only releases the frames that may be left on the queue by calling iwl_pcie_gen2_txq_unmap(), but doesn't actually free the DMA ring or byte-count tables for the queue. This leads to pretty large memory leaks (at least before my queue size improvements), in particular in monitor/sniffer mode on channel hopping since this happens on every channel change. This was also now more evident after the move to a DMA pool for the byte count tables, showing messages such as BUG iwlwifi:bc (...): Objects remaining in iwlwifi:bc on __kmem_cache_shutdown() This fixes https://bugzilla.kernel.org/show_bug.cgi?id=206811. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6b35ff91572f ("iwlwifi: pcie: introduce a000 TX queues management") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417100405.f5f4c4193ec1.Id5feebc9b4318041913a9c89fc1378bb5454292c@changeid
2020-04-21iwlwifi: actually check allocated conf_tlv pointerChris Rorvick
Commit 71bc0334a637 ("iwlwifi: check allocated pointer when allocating conf_tlvs") attempted to fix a typoe introduced by commit 17b809c9b22e ("iwlwifi: dbg: move debug data to a struct") but does not implement the check correctly. Fixes: 71bc0334a637 ("iwlwifi: check allocated pointer when allocating conf_tlvs") Tweeted-by: @grsecurity Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200417074558.12316-1-sedat.dilek@gmail.com
2020-03-27Merge tag 'wireless-drivers-next-2020-03-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.7 Third set of patches for v5.7. Nothing really special this time, business as usual. When pulling this to net-next there's again a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve this drop these three lines from the conflict (the first hunk from "HEAD") as the whole AX200 block was moved above in the same file: IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name), IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name), IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name), And keep all the __IWL_DEV_INFO() entries (the second hunk). In other words, take everything from wireless-drivers-next. When running 'git diff' after the resolution the output should be empty. Major changes: brcmfmac * add USB autosuspend support ath11k * handle RX fragments * enable PN offload * add support for HE BSS color iwlwifi * support new FW API version * support for EDCA measurements * new scan API features * enable new firmware debugging code ==================== Kalle gave me directions on how to resolve the iwlwifi conflict as follows: ==================== When pulling this to net-next there's again a conflict in: drivers/net/wireless/intel/iwlwifi/pcie/drv.c To solve this drop these three lines from the conflict (the first hunk from "HEAD") as the whole AX200 block was moved above in the same file: IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name), IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name), IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name), And keep all the __IWL_DEV_INFO() entries (the second hunk). In other words, take everything from wireless-drivers-next. When running 'git diff' after the resolution the output should be empty. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27iwlwifi: mvm: remove newline from rs_pretty_print_rate()Johannes Berg
Some of the places using this want the newline, but not all, so remove the newline from it and generate it in the debugfs files where it's desired. The effect of this is not printing double newlines in debug log messages. Change-Id: Ia59b0abbef16b6783fcabc095c5fde16bd047a26 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: pcie: make iwl_pcie_cmdq_reclaim staticJohannes Berg
There's no need for this to be exposed outside of the tx.c file, make it static. Change-Id: I41d40008311b108d0578bd2ec73c5477e700a839 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: bump FW API to 53 for 22000 seriesLuca Coelho
Start supporting API version 53 for 22000 series. Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove IWL_FW_DBG_DOMAIN macroJohannes Berg
This is used to initialize the default value, but refers back to the value itself, essentially leading to a val = val assignment at init time ... that's useless, remove it and use _NODEF. Change-Id: I725923016563c34ce2fa057bf7c12984e1041c49 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: yoyo: enable yoyo by defaultLuca Coelho
Now that YoYo is more mature, we can enable it by default, so we collect data in the new way. Change-Id: Ic1a147f935286b085ca8bdb248a7493b7c6341ea Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: scan: support FW APIs with variable number of profilesTova Mussai
The FW changed the maximum number of scan offload profiles to 8 in new APIs. Support it by changing the scan_offload_profile_cfg struct to be more dynamic, so we can reuse most of the code and only change size of the profiles array. Change-Id: I65210cf541af46e2675a8c764d5871f7f5b070d6 Signed-off-by: Tova Mussai <tova.mussai@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: yoyo: don't block dumping internal memory when not in SRAM moderotem saado
When we have an assert during D3 we want to dump the internal buffer memory even if are we working in DRAM debug mode. We should not block dumping it. Change-Id: I69aad2d4904c4f8bb653c61e8781a2e07780054f Signed-off-by: Rotem Saado <rotem.saado@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove support for QnJ HR FPGALuca Coelho
We don't support the FPGA versions of this card combination anymore. Remove the cfg mangling that tries to load it and all the relevant structures. Change-Id: I190652101afcab682cfba873d062992f11efca32 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove support for QnJ Hr STEP ALuca Coelho
We don't support QnJ HR STEP A anymore. Remove the structures we used for it. Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: add trans_cfg for devices with long latencyLuca Coelho
A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and 0x43F0, need a longer wait for the xtal to stabilize. To handle this, add a new trans_cfg structure for Qu devices with a larger xtal_latency value and apply them to the devices recognized by these IDs. Also add a flag that allows us to inform the FW that the low latency xtal should be used. Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: add support for version 2 of SOC_CONFIGURATION_CMDLuca Coelho
This new command is mostly backwards compatible, with the exception that the device_type element was changed into a bitmask. The device type bit remains the same (because we only had 0 and 1 anyway), but when using v1 we can't set any other bits, because that would change the integer. Other than that, the struct remains the same and the driver can set the device_type bit in both cases, but it can only set the low_latency bit if VER_2 is used. Change-Id: Ib68d4c821ebcce253b42ed0ea15881fb4e3e01da Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: mvm: add support for non EDCA based measurementsAvraham Stern
Add support for requesting trigger-based / non trigger-based measurements. Change-Id: Ib4d0c471da9c50d9981541a7f5926db384a0f7ce Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: remove unnecessary cfg mangling for Qu C and QuZ with JfLuca Coelho
Now that we identify the correct cfgs with the new tables for Qu step C and QuZ with Jf, we can remove the mangling we do later on. Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: convert QnJ with Jf devices to new config tableLuca Coelho
All the QnJ devices have a similar matching to the other Qu devices, but needs a different configuration. Convert the QnJ devices to the new table accordingly. Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2020-03-27iwlwifi: convert all Qu with Jf devices to the new config tableLuca Coelho
Add new generic iwl_trans structures for these devices and apply the correct cfg depending on the device characteristics. Since we have to match Qu with IWL_CONFIG_ANY, we also need to move the Hr devices to the new table, but for now we keep matching on PCI device and subsystem device IDs. Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0 Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.51.0) at 2025-09-26 20:06:01 +0000