| Age | Commit message (Collapse) | Author |
|---|
|
These are not MVM specific.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240625194805.09f672318944.Idffeab6a4dfc12effebd1c50815ae5c540afca74@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
LNL is the codename for the upcoming Series 2 Core Ultra
processors designed by Intel. AX101, AX201 and AX203 devices
are not shiped on LNL platforms, so don't support them.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240613171043.f24a228dfd96.I989a2d3f1513211bc49ac8143ee4e9e341e1ee67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When UATS isn't enabled (no VLP/AFC AP support), we need to still
set the right bits in the channel/regulatory flags, so remove the
uats_enabled argument to the parsing etc.
Also, firmware deals just fine with getting the UATS table if it
supports the command even if the bits aren't set, so always send
it, since it's also needed if BIT(31) is set, but the driver need
not have any knowledge of that. Remove 'uats_enabled' entirely.
Fixes: 0d2fc8821a7d ("wifi: iwlwifi: nvm: parse the VLP/AFC bit from regulatory")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618195731.a81e7234c4f6.Ic0131180d38e0f1ead2f7fa0e7583407ceaa0bd1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If channels are marked VLP, then we're actually also
allowed to be VLP AP/GO. Enable this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.e15f24fc6bc8.I33ed7d141fec731e79370ba6c7cfbe28776944a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This isn't related to whether or not "fw can be loaded",
but rather requesting that ME go into a state where doing
a product reset is safe. This is related to FW load only
in the specific case of where it's used today in iwlmvm,
notably when it's known that the firmware itself will (or
at least may) do a product reset during load.
Clarify the documentation.
I was tempted to rename things too, but on the ME side it
really is also called PLDR (which is a Windows term and
may not even match the complete behaviour since doing a
full product reset from the driver also requires calling
an ACPI method first.) So keep the name aligned with ME.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.ca2c55121a04.I889cd47210367ca9110411472ee696b796a37ab5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
PLDR (product level device reset) is a Windows term, and
is something the driver triggers there, AFAICT.
Really what 'pldr_sync' here wants to capture is whether
or not the firmware will/may do a product reset during
initialization, which makes the device drop off the bus,
requiring a rescan. If this is the case, obviously the
init will fail/time out, so we don't want to report all
kinds of errors etc., hence this tracking variable.
Rename it to 'fw_product_reset' to capture the meaning
better.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.ccf849642af8.I01dded6b2393771b7baf8b4b17336784d987c7c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When setting the keys for secure measurement with an AP the station
is associated with, the TK should only be referenced and not copied.
In addition set the cipher only when the correct station is found.
Fixes: 626be4bf99f6 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.be2a5327554d.Ie53220b075dacb23a8d073f6008aafd339368592@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the function isn't actually common (any more), just
dissolve it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.adf54ab5bc4a.I90339f152bba73b622e05063d16ae914ae20053f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Those bits are never used.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.cd26318d9513.I035ec7f3f022cdc19a650eca3b89455e3b5eca18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The new op_mode won't have this callback.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240618194245.718983e7b832.I02fb130aa3d2044958cba7dced357031b92e33bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start supporting API version 92 for new devices.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.433cfbb6f042.I914da5bd0e2ed25148726f9fb55e7a60b895edfd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_trans_pcie_gen2_fw_alive doesn't use the scd_addr parameter,
it was there only because we needed the functio to have a prototype same
as iwl_trans_ops::fw_alive callback.
But now the ops is removed so no reason to keep the parameter.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240618194245.1aa8bf13aea9.I9662c10c1db545dd8849af4bb4ab47708d4548d8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This debug is not in use anymore. Remove it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240618194245.bded22049fae.I980c4a941d769f93cf74bfc90a7d7d9fb384dea1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will allow to suspend / resume the system without resetting the
firmware. This will allow to reduce the resume time.
In case the fast_resume fails, stop the device and bring it up from
scratch.
Raise the timeout for the D3_END notification since in some iterations,
it took 240ms.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618194245.03b8d2801044.I613d17c712de7a0d611cde4e14f37ebbe0c3c964@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix incorrect use of _tx_ valid ant data in the function.
Fixes: 4ea1ed1d14d8 ("wifi: iwlwifi: mvm: support set_antenna()")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.b7c6a320c7dc.I3092eb5275056f2162b9694e583c310c38568b2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
AP interfaces fundamentally cannot leave the channel, so multi-
channel operation with them isn't really possible. We shouldn't
advertise support for such, at least not as long as we don't
have full multi-radio support. Thus, remove the AP bit from the
interface combinations for two channels and add another set for
just one channel that has it.
Also, to avoid duplicating everything even more, unify the NAN
and non-NAN cases.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.3213638262ef.I2a0031b37623d7763fd0c5405477ea7206a3e923@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Do not access legacy bits for new devices, this has no effect.
Somehow, wowlan worked despite the usage of the wrong bits. Now
that we want to keep the firmware loaded during suspend even without
wowlan, this change is needed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618200104.399d4d215210.Id12e7fdb7bab9f2c4c0d292519b5c1b4753a8c84@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will allow the low level driver to take different actions for
different flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
1e7962114c10 ("bnxt_en: Restore PTP tx_avail count in case of skb_pad() error")
165f87691a89 ("bnxt_en: add timestamping statistics support")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If non-BSS and remain-on-channel (ROC) blocking were to occur
simultaneously, they'd step on each other's toes, unblocking
when not yet supported. Disentangle these bits, and ROC doesn't
need to use the non_bss_link() function then.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting all FWs older than the max API version.
These FW versions were supported since v6.5.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.ad6d43fe9893.I96f769e7d5be3e6499d260451df781bd694a5142@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When EMLSR gets unblocked, the current code checks if the last exit was
due to an EXIT reason (as opposed to a BLOCKING one), and if so, it
does nothing, as in this case a MLO scan was scheduled to run in 30
seconds.
But the code doesn't consider the time that passed from the last exit,
so if immediately after the exit a blocker occurred (e.g. non-BSS
interface), and lasts for more than 30 seconds, then the MLO scan and the
following link selection will decide not to enter EMLSR, and when the
unblocking event finally happens, the reason is still set to the EXIT one,
so it will do nothing, and we will not have the chance to re-enable EMLSR.
Fix this by checking also the time that has passed since the last exit,
only if it is less than 30 seconds, we can count on the scheduled MLO
scan.
Note that clearing the reason itself can't be done since it is needed
for the EMLSR prevention mechanism.
Fixes: 2f33561ea8f9 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.58556fc4cfa9.I4c55b3cd9f20b21b37f28258d0fb6842ba413966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The TX queue code was mostly moved out to support an internal
transport that we were never going to publish, but we're no
longer using that. Since we're also going to be dissolving
the virtual transport layer entirely, integrate the TX queue
code into the PCIe layer.
This also has a small kernel of already removing the virtual
transport function layer, since iwl_trans_send_cmd() calls
iwl_trans_pcie_send_hcmd() directly now, even if that still
calls the transport send_cmd method for now, we'll clean it
up later.
Also, not everything is renamed yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.936b13f45071.Ib219ce01a1e67bcad79d5131626db950252aaa46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This needs to include dbg-tlv.h since it uses the value of
IWL_FW_INI_ALLOCATION_NUM from that file.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.2d25691283eb.I0909621a0e293a8a21d4f1de6e5fd59c22e4b212@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This really isn't correct to be in the opmode, do the clamping
(and power-of-2 fixup that may be necessary due to this, or even
otherwise) in the queue code. Also move down the retrying of the
allocation, it should be after all the size fixups, but also it
just makes sense, and avoids retrying same-size allocations in
the case of the BZ-family A-step workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.000a0a1e807d.Ib822590d5aca76ff3168418ae2c139b3d43d81ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When entering D3 we want to configure skip over DTIM, but
it can't use the deflink configuration, that will not even
exist. Adjust the code to handle multiple links by taking
the min skip, even if we should only have a single active
link at this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.bccf980fadb4.Idc98b9f3634f39d2fae9bd9916f5d050ccd48f95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Stop supporting older FWs.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.ff8477233010.Ic8c73bd6749cc5f8ab5297807bb0be9bd96a59fa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These entries are not used, remove them.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.0c7c520814d5.I19cefb3d81b03a5be94c029cfffd1c8b8c437182@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The flags variable is incorrectly checked while it is still cleared and
has not been assigned any value yet.
Fix it.
Fixes: a615323f7f90 ("wifi: iwlwifi: mvm: always apply 6 GHz probe limitations")
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.291c33f9a283.Id651fe69828aebce177b49b2316c5780906f1b37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For using the ROC command, check that the ROC version
is *greater or equal* to 3, rather than *equal* to 3.
The ROC version was added to the TLV starting from
version 3.
Fixes: 67ac248e4db0 ("wifi: iwlwifi: mvm: implement ROC version 3")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.93d86cd188ad.Iceadef5a2f3cfa4a127e94a0405eba8342ec89c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Unlock the mvm mutex before returning from a
function with the mutex locked.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.96cb956db4af.Ib468cbad38959910977b5581f6111ab0afae9880@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE.
Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When HW rfkill is toggled to disable the RF, the flow to stop scan is
called. When trying to send the command to abort the scan, since
HW rfkill is toggled, the command is not sent due to rfkill being
asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this
is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow
continues to wait for scan complete notification and fails. Since it
fails, the UID to type mapping is not cleared, and thus a warning is
later fired when trying to stop the interface.
To fix this, modify the UMAC scan abort flow to force sending the
scan abort command even when in rfkill, so stop the FW from accessing
the radio etc.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In some versions of cfg80211, the ssids poinet might be a valid one even
though n_ssids is 0. Accessing the pointer in this case will cuase an
out-of-bound access. Fix this by checking n_ssids first.
Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Ensure that the 6 GHz channel is configured with a valid direct BSSID,
avoiding any invalid or multicast BSSID addresses.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When entering RF-kill, mac80211 tears down BA sessions, but
due to RF-kill the commands aren't sent to the device. As a
result, there can be frames pending on the reorder buffer or
perhaps even received while doing so, leading to warnings.
Avoid the warnings by doing the BA session teardown normally
even in RF-kill, which also requires queue sync.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The BIGTK cipher field was added to the kek_kck_material_cmd
but wasn't assigned. Fix that by differentiating between the
IGTK/BIGTK keys and assign the ciphers fields accordingly.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If pre-recovery mac80211 tried to disable a link but this disablement
failed, then there might be a mismatch between mac80211 assuming the
link has been disabled and the driver still having the data around.
During recover itself, that is not a problem, but should the link be
activated again at a later point, iwlwifi will refuse the activation as
it detects the inconsistent state.
Solve this corner-case by iterating the station in the restart cleanup
handler.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In the driver we only use skb_put* for adding data to the skb, hence data
never moves and skb_reset_mac_haeder would set mac_header to the first
time data was added and not to mac80211 header, fix this my using the
actual len of bytes added for setting the mac header.
Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer")
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We don't actually support >64 even for HE devices, so revert
back to 64. This fixes an issue where the session is refused
because the queue is configured differently from the actual
session later.
Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Liad Kaufman <liad.kaufman@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After moving from commands to notificaitons in the d3 resume flow,
removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes
the return of the default value when looking up their version.
Returning zero here results in the driver sending the not supported
NON_QOS_TX_COUNTER_CMD.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since IWL_FW_CMD_VER_UNKNOWN = 99, then my change to consider
cmd_ver >= 7 instead of cmd_ver = 7 included also firmwares that don't
advertise the command version at all. This made us send a command with a
bad size and because of that, the firmware hit a BAD_COMMAND immediately
after handling the REDUCE_TX_POWER_CMD command.
Fixes: 8f892e225f41 ("wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.eb20ff5050d3.Ie4fc6f5496cd296fd6ff20d15e98676f28a3cccd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In beacon template version 14, make sure to always set
the TWT IE offset before sending the beacon template command,
also in the debugfs inject_beacon_ie path.
If the TWT IE does not exist, the offset will be set to zero.
Fixes: bf0212fd8faa ("wifi: iwlwifi: mvm: add beacon template version 14")
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512152312.eb27175c345a.If30ef24aba10fe47fd42a7a9703eb8903035e294@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The initialization of this worker moved to iwl_mvm_mac_init_mvmvif
but we removed only from the pre-MLD version of the add_interface
callback. Remove it also from the MLD version.
Fixes: 0bcc2155983e ("wifi: iwlwifi: mvm: init vif works only once")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240512152312.4f15b41604f0.Iec912158e5a706175531d3736d77d25adf02fba4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The iwl_dev_info entries for these devices were incorrectly positioned
within the array, out of chronological order. Move them arround.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240527190228.a75e9a1eb86c.I003980f8ca60a96019657e396e848a07df6b92a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The code that is parsing the amsdu_size module parameter and mapping it
to the corresponding Rx buffer size is common to all opmodes.
Move it into a function in iwlwifi, as preparation to a new op mode we
are working on.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240527190228.a3430d32923d.Iab3c22ef0df685f72f22dafc47021f0dc7bd6fa5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
