| Age | Commit message (Collapse) | Author |
|---|
|
If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32.
Cc: stable@vger.kernel.org
Fixes: eae94cf82d74 ("iwlwifi: mvm: add support for 6GHz")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219375
Link: https://patch.msgid.link/20241023091744.f4baed5c08a1.I8b417148bbc8c5d11c101e1b8f5bf372e17bf2a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Revert commit dfdfe4be183b ("wifi: iwlwifi: remove retry loops in
start"), it turns out that there's an issue with the PNVM load
notification from firmware not getting processed, that this patch
has been somewhat successfully papering over. Since this is being
reported, revert the loop removal for now.
We will later at least clean this up to only attempt to retry if
there was a timeout, but currently we don't even bubble up the
failure reason to the correct layer, only returning NULL.
Fixes: dfdfe4be183b ("wifi: iwlwifi: remove retry loops in start")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we add the vif (and its default link) in fw restart we may
override the link that already exists. We take care of this but if
link 0 is a valid MLO link, then we will re-create a default link on
mvmvif->link[0] and we'll loose the real link we had there.
In non-MLO, we need to re-create the default link upon the interface
creation, this is fine. In MLO, we'll just wait for change_vif_links()
to re-build the links.
Fixes: bf976c814c86 ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.385bfea1b2e9.I4a127312285ccb529cc95cc4edf6fbe1e0a136ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer.
Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
SAR table format in ACPI and local data base are different,
So modified code to read data properly.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.f077aced4dee.I4dc618f12d01f7ad19f9f8881f6e09eea77e9a14@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_mvm_send_ap_tx_power_constraint_cmd is a no-op if the link is not
active (we need to know the band etc.)
However, for the station case it will be called just before we set the
link to active (by calling iwl_mvm_link_changed with
the LINK_CONTEXT_MODIFY_ACTIVE bit set in the 'changed' flags and
active = true), so it will end up doing nothing.
Fix this by calling iwl_mvm_send_ap_tx_power_constraint_cmd before
iwl_mvm_link_changed.
Fixes: 6b82f4e119d1 ("wifi: iwlwifi: mvm: handle TPE advertised by AP")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.5c235fccd3f1.I2d40dea21e5547eba458565edcb4c354d094d82a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped.
Fixes: a8b5d4809b50 ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.c54c42779882.Ied79e0d6244dc5a372e8b6ffa8ee9c6e1379ec1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct ieee80211_radiotap_header_fixed`.
This structure groups together all the members of the flexible
`struct ieee80211_radiotap_header` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct ieee80211_radiotap_header` to `struct
ieee80211_radiotap_header_fixed`.
We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct ieee80211_radiotap_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl4965 fails upon resume from hibernation on my laptop. The reason
seems to be a stale interrupt which isn't being cleared out before
interrupts are enabled. We end up with a race beween the resume
trying to bring things back up, and the restart work (queued form
the interrupt handler) trying to bring things down. Eventually
the whole thing blows up.
Fix the problem by clearing out any stale interrupts before
interrupts get enabled during resume.
Here's a debug log of the indicent:
[ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000
[ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000
[ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio.
[ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload
[ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282
[ 12.052207] ieee80211 phy0: il4965_mac_start enter
[ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff
[ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready
[ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions
[ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S
[ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm
[ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm
[ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK
[ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations
[ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up
[ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done.
[ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down
[ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout
[ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort
[ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver
[ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared
[ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state
[ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master
[ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear.
[ 12.058869] ieee80211 phy0: Hardware restart was requested
[ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms.
[ 16.132303] ------------[ cut here ]------------
[ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue.
[ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143
[ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[ 16.132463] Workqueue: async async_run_entry_fn
[ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b
[ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282
[ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001
[ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001
[ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003
[ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001
[ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92
[ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[ 16.132521] Call Trace:
[ 16.132525] <TASK>
[ 16.132526] ? __warn+0x77/0x120
[ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[ 16.132564] ? report_bug+0x15c/0x190
[ 16.132568] ? handle_bug+0x36/0x70
[ 16.132571] ? exc_invalid_op+0x13/0x60
[ 16.132573] ? asm_exc_invalid_op+0x16/0x20
[ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211]
[ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core]
[ 16.132617] ? pick_eevdf+0x133/0x1c0
[ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90
[ 16.132626] ? wakeup_preempt+0x4a/0x60
[ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190
[ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211]
[ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[ 16.132697] dpm_run_callback+0x75/0x1b0
[ 16.132703] device_resume+0x97/0x200
[ 16.132707] async_resume+0x14/0x20
[ 16.132711] async_run_entry_fn+0x1b/0xa0
[ 16.132714] process_one_work+0x13d/0x350
[ 16.132718] worker_thread+0x2be/0x3d0
[ 16.132722] ? cancel_delayed_work_sync+0x70/0x70
[ 16.132725] kthread+0xc0/0xf0
[ 16.132729] ? kthread_park+0x80/0x80
[ 16.132732] ret_from_fork+0x28/0x40
[ 16.132735] ? kthread_park+0x80/0x80
[ 16.132738] ret_from_fork_asm+0x11/0x20
[ 16.132741] </TASK>
[ 16.132742] ---[ end trace 0000000000000000 ]---
[ 16.132930] ------------[ cut here ]------------
[ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211]
[ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev
[ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143
[ 16.133018] Tainted: [W]=WARN
[ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010
[ 16.133021] Workqueue: async async_run_entry_fn
[ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211]
[ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e
[ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246
[ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0
[ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0
[ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000
[ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60
[ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8
[ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000
[ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0
[ 16.133067] Call Trace:
[ 16.133069] <TASK>
[ 16.133070] ? __warn+0x77/0x120
[ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211]
[ 16.133098] ? report_bug+0x15c/0x190
[ 16.133100] ? handle_bug+0x36/0x70
[ 16.133103] ? exc_invalid_op+0x13/0x60
[ 16.133105] ? asm_exc_invalid_op+0x16/0x20
[ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211]
[ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211]
[ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel]
[ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211]
[ 16.133192] __dev_close_many+0xa2/0x120
[ 16.133195] dev_close_many+0x90/0x150
[ 16.133198] dev_close+0x5d/0x80
[ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211]
[ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211]
[ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211]
[ 16.133269] dpm_run_callback+0x75/0x1b0
[ 16.133273] device_resume+0x97/0x200
[ 16.133277] async_resume+0x14/0x20
[ 16.133280] async_run_entry_fn+0x1b/0xa0
[ 16.133283] process_one_work+0x13d/0x350
[ 16.133287] worker_thread+0x2be/0x3d0
[ 16.133290] ? cancel_delayed_work_sync+0x70/0x70
[ 16.133294] kthread+0xc0/0xf0
[ 16.133296] ? kthread_park+0x80/0x80
[ 16.133299] ret_from_fork+0x28/0x40
[ 16.133302] ? kthread_park+0x80/0x80
[ 16.133304] ret_from_fork_asm+0x11/0x20
[ 16.133307] </TASK>
[ 16.133308] ---[ end trace 0000000000000000 ]---
[ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110
[ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110
Cc: stable@vger.kernel.org
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
iwlegacy uses command buffers with a payload size of 320
bytes (default) or 4092 bytes (huge). The struct il_device_cmd type
describes the default buffers and there is no separate type describing
the huge buffers.
The il_enqueue_hcmd() function works with both default and huge
buffers, and has a memcpy() to the buffer payload. The size of
this copy may exceed 320 bytes when using a huge buffer, which
now results in a run-time warning:
memcpy: detected field-spanning write (size 1014) of single field "&out_cmd->cmd.payload" at drivers/net/wireless/intel/iwlegacy/common.c:3170 (size 320)
To fix this:
- Define a new struct type for huge buffers, with a correctly sized
payload field
- When using a huge buffer in il_enqueue_hcmd(), cast the command
buffer pointer to that type when looking up the payload field
Reported-by: Martin-Éric Racine <martin-eric.racine@iki.fi>
References: https://bugs.debian.org/1062421
References: https://bugzilla.kernel.org/show_bug.cgi?id=219124
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()")
Tested-by: Martin-Éric Racine <martin-eric.racine@iki.fi>
Tested-by: Brandon Nielsen <nielsenb@jetfuse.net>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/ZuIhQRi/791vlUhE@decadent.org.uk
|
|
Replace the ifdef CONFIG_PM by CONFIG_PM_SLEEP. CONFIG_PM was useful
when we had CONFIG_PM_RUNTIME but that was removed long ago.
Use PM_SLEEP consistently across the driver.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.44e47ba584de.I64f985d0405345252b76b7157291b79677abd64d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a channel ctx is assigned to a link, we set the
LINK_CONTEXT_MODIFY_RATES_INFO to indicate that the rate fields are now
valid. But then we always take the rates of 2.4 GHz regardless of actual
used band.
This is because we are getting the band from bss_conf->chanctx_conf, but
this is assigned only after drv_assign_vif_chanctx returns, so we take
the bands of 2.4 GHz.
Fix it by taking the band from the iwl_mvm_link_info::phy_ctxt instead,
as this has already assigned in this point.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.11c2d3609609.I8fa59e29b6bb38e5d06f3536d54dfb2c5d5bab11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The last_sub_index field is not used and appears to be a leftover
from a previous implementation, remove it.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.da75cfef9144.I6e1fb635b2893618e6bd28501fb858042d8aa44e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These are not mvm specific
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.22e28b56da2c.Ib859a05ed133fa5a1426c5feffa8999a18bba6f2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is not mvm specific.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.57efe93c2702.I4619885f691cc295cc440a62f23405392da338f4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This strcuture is not specific to mvm, so rename it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.39c9ceea41d3.I2a06bfca589c467fa84ad82ff86e73ec82e72a5e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This isn't mvm specific.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.5d71a0a2b56c.I7e0fe636d914852963e7a2f5e6037d0c3e367145@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The channel number is at the same position across all versions
of the channel description struct, so move it out of the union
that versions it. Also add __packed annotations to all of the
sub-structs and the union so it's packed correctly, and fully
document the structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.e31623ae4201.I1ea69a8ec3d39492f39d84e31fb105b159359c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We forgot to release the ROC reason for ESR prevention when the remain
on channel expires.
Add this.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.8f8765f359cc.I16fcd6198072d422ff36dce68070aafaf011f4c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Block other mcc expect CN from WRDD ACPI.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.fe6ea7aa4b39.I86004687a2963fe26f990770aca103e2f5cb1628@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This shouldn't happen at all, since in station mode all MMPDUs
go through the TXQ for the STA, and not this function. There
may or may not be a race in mac80211 through which this might
happen for some frames while a station is being added, but in
that case we can also just drop the frame and pretend the STA
didn't exist yet.
Also, the code is simply wrong since it uses deflink, and it's
not easy to fix it since the mvmvif->ap_sta pointer cannot be
used without the mutex, and perhaps the right link might not
even be known.
Just drop the frame at that point instead of trying to fix it
up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Start supporting API version 93 for new devices.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240808232017.5c9846f4c2c3.I6c825bc93aa23db302f24db5617f9b9b06042ec8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This used to extract the timeout from the debug TLV
(FW_DBG_TRIGGER_TXQ_TIMERS), which is not in use.
Cleanup iwl_mvm_get_wd_timeout to not consider the debug TLV.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240808232017.7a6944bc2e38.I532b4b5487c6be9203ff4db9742d7cc5b148d502@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We used to have the opmode configuring it to the trans according to the
debug tlv value (FW_DBG_TRIGGER_TXQ_TIMERS).
But this debug is not used, so trans can just have the default value
hardcoded.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.87af3f063025.I2222981ead13f6a917f2d4b116c5b94200dc9e51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Take the proper action upon EML OMN frame failure.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825090005.01ff45fa69db.I9f2d3ea851050f6031ac07bbe69eb38000fd5683@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When processing a MCC update notification from the firmware, if
the firmware indicates that the regulatory configuration didn't
change, abort the flow and do not notify higher layers.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.60dd273d00e0.I985b3bc61ca4a6cac7c1d1365b5c0afba04f3031@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the firmware fails to send EML OMN frames, it notifies the host and
the host need to take proper action.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.0c6bc216ef8c.Ida85d2062734a569e1af35f47d14cc5bb4bf893e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If both links are missing 5 beacons, we need to exit EMLSR, if only one
link misses beacons, we need to wait until 11 beacons are missed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Use the same handler for both types and just convert the old version to
the new. Drop the unused fields from the old one and fake the new
fields.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.a64ffc998569.I7d181052b1a69c331d07263f20c1e00cbc0bc891@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Note that the new API does not have the same notification ID as the
previous notification: the new notification belongs to the group 0x3.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A new version is coming up. Rename the current struct to include the
current version.
s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, the driver handles SMPS decisions by tracking AP
capabilities, BT coexistence changes, sending necessary SMPS
frames to the AP, and updating firmware with RX chain info
using the RLC_CONFIG_CMD.
Starting with version 3 of the RLC_CONFIG_CMD, the firmware
takes over this responsibility. It now tracks SMPS, sends
frames, and configures the RLC.
In this patch:
1. Stop sending RLC_CONFIG_CMD when firmware supports RLC
offload (version 3), as rlc.rx_chain_info is not needed by
firmware, and no other field in the cmd is used.
2. Prevent the driver from forwarding any SMPS requests to
mac80211, i.e., the driver should not transmit SMPS frames
to the AP as firmware handles that.
3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS
conditionally based on RLC version.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
lib80211_register_crypto_ops() and lib80211_unregister_crypto_ops() don't
modify their "struct lib80211_crypto_ops *ops" argument. So, it can be
declared as const.
Doing so, some adjustments are needed to also constify some date in
"struct lib80211_crypt_data", "struct lib80211_crypto_alg" and the
return value of lib80211_get_crypto_ops().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c74085e02f33a11327582b19c9f51c3236e85ae2.1722839425.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add prints of the per-link MPDU counters, and change the other MPDU
counters related prints to use DL_INFO, which is already used for all
EMLSR tests anyway, instead of DL_STATS which pollutes the logs with all
the RX signal info.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Link: https://patch.msgid.link/20240729201718.02bd85837c87.I85480c9c4fab0f7a574dd69cbeafd82674146921@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for enabling channel puncturing for US/CAN based
on BIOS configuration through UEFI
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.828f3ecf5118.I5561ab8c7cd48ad4e5d6daf21b037bf88c619a4a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This will help to dump the firmware logs at the right spot if needed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.3a91e89e32f8.Ieb28d7756c47dee52c912a71abe82fa0b08b19da@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Iterate all the links and check if any action must be taken.
The new notification impacts only the esr decision.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.00cfc07879c6.I8491483fda3b5888ea6ffa10fbd17807e443f943@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have a new notification the BT profile. It contains almost nothing,
only the wifi loss information. Copy this into mvm. We still need to
iterate over the vifs / links to use this data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced
by a new notification coming with a non-legacy group. Rename it to avoid
confusion.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The algo running in fw may take a little longer than 5 milliseconds,
(e.g. measurement on 80MHz while associated). Increase the minimum
time between measurements to 7 milliseconds.
Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The cipher pointer is not set, but is derefereced trying to set its
content, which leads to a NULL pointer dereference.
Fix it by pointing to the cipher parameter before dereferencing.
Fixes: 626be4bf99f6 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.24e83369f136.I80501ddcb82920561f450d00020d860e7a3f90c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the upper layer requests to cancel an ongoing scan, a race
is possible in which by the time the driver starts to handle the
upper layers scan cancel flow, the FW already completed handling
the scan request and the driver received the scan complete
notification but still did not handle the notification. In such a
case the FW will simply ignore the scan abort request coming from
the driver, no notification would arrive from the FW and the entire
abort flow would be considered a failure.
To better handle this, check the status code returned by the FW for
the scan abort command. In case the status indicates that
no scan was aborted, complete the scan abort flow with success, i.e.,
the scan was aborted, as the flow is expected to consume the scan
complete notification.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware needs to know what we had in the HE CAP, propagate that
setting to the firmware through the LINK command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
