summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex/pcie.c
AgeCommit message (Collapse)Author
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: avoid memsetting PCIe event bufferAmitkumar Karwar
Preallocated PCIe buffer is being reused for all PCIe interface events. Physical address of the buffer is shared with firmware so that it can perform DMA on it. As event length is specified in the header, there should not be a problem if the buffer gets overwritten. We will save some cycles by avoiding memset everytime while submitting the buffer to firmware. Fixes: 2728cecdc7d6bf3d21(mwifiex: corrections in PCIe event skb) Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-13mwifiex: add support for 8997 chipsetZhaoyang Liu
This patch adds support for 8997 chipset to mwifiex with SDIO/PCIe/USB interface. The corresponding firmware image files are located in: "mrvl/sd8997_uapsta.bin" "mrvl/pcie8997_uapsta.bin" "mrvl/usb8997_uapsta.bin" Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: corrections in PCIe event skb handlingAmitkumar Karwar
Preallocated event SKBs are getting reused for PCIe chipset. Their physical addresses are shared with firmware so that firmware can write data into them. This patch makes sure that SKB is cleared and length is set to default while submitting it to firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-02mwifiex: device dump support via devcoredump frameworkAmitkumar Karwar
Currently device dump generated in the driver is retrieved using ethtool set/get dump commands. We will get rid of ethtool approach and use devcoredump framework. Device dump can be trigger by cat /debugfs/mwifiex/mlanX/device_dump and when the dump operation is completed, data can be read by cat /sys/class/devcoredump/devcdX/data We have prepared following script to split device dump data into multiple files. [root]# cat mwifiex_split_dump_data.sh #!/bin/bash # usage: ./mwifiex_split_dump_data.sh dump_data fw_dump_data=$1 mem_type="driverinfo ITCM DTCM SQRAM APU CIU ICU MAC" for name in ${mem_type[@]} do sed -n "/Start dump $name/,/End dump/p" $fw_dump_data > tmp.$name.log if [ ! -s tmp.$name.log ] then rm -rf tmp.$name.log else #Remove the describle info "Start dump" and "End dump" sed '1d' tmp.$name.log | sed '$d' > /data/$name.log if [ -s /data/$name.log ] then echo "generate /data/$name.log" else sed '1d' tmp.$name.log | sed '$d' > /var/$name.log echo "generate /var/$name.log" fi rm -rf tmp.$name.log fi done Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-02mwifiex: use generic name 'device dump'Amitkumar Karwar
Currently we are dumping driver information also inside firmware dump API. We will call it as device dump and dump driver and firmware data separately. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-06-02mwifiex: dump driver information for PCIe interfaceAmitkumar Karwar
Currently we are dumping driver information only for SDIO interface. This patch adds missing mwifiex_dump_drv_info() call for PCIe interface. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: change dbg print func to mwifiex_dbgZhaoyang Liu
This patch changes all debug print functions from dev_dbg/dev_err/dev_info to mwifiex specific debug functions. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: add dump data debug supportZhaoyang Liu
This patch is to add support for data hexdump debug feature. It is controlled by level debug_mask in adapter structure. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30mwifiex: Fix issue in the SDIO reset path of mwifiex.Maithili Hinge
SDIO reset was not happening properly on mwifiex as cancel_work_sync in mwifiex_sdio_remove used to kill the calling work function itself. Due to this, the interface was not getting removed and card was not getting added again. Reset work function has been made independent of adapter variable and cancel_work_sync has been moved to cleanup function. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: avoid queue_work while work is ongoingShengzhen Li
Current code does not check whether main_work_queue or rx_work_queue is running when preparing to do queue_work, this code fix add check before calling queue_work, reducing unnecessary queue_work switch. This change instead sets more_task flag to ensure we run main_process superloop once again. Signed-off-by: Shengzhen Li <szli@marvell.com> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: rename alloc_rx_buf to alloc_dma_aligned_bufAvinash Patil
Rename this function to reflect its purpose correctly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27mwifiex: DMA alignment for RX packetsAvinash Patil
This patch adds support for DMA alignment of sk_buffs allocated for RX. Patch also adds support to modify skb allocation flags. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27mwifiex: change datatype to bool for device capability flagsAvinash Patil
This patch changes datatypes for device capability flags to bool. Patch also aggregates these variables at single place. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-27mwifiex: selectively choose ext_scan supportAvinash Patil
Some devices do not support extended scan. This patch adds support to enble ext_scan selectively. For SD/PCIe interfaces, deefine ext_scan_support as part of card structure and use it to initialize ext_scan in adapter during registering device. For USB interfaces, we initialize ext_scan during register_dev handler. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Increase priority of firmware download messageAmitkumar Karwar
When driver is loaded, it is important to know if FW was already active or it is freshly downloaded. This patch increases the priority of these messages. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add wakeup timer based recovery mechanismAmitkumar Karwar
If host fails to wakeup the firmware, we will trigger card reset after 3 second timeout. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-09-30mwifiex: remove unnecessary rx_q lockAvinash Patil
SKB lists have their own lock. So this lock is not needed. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30mwifiex: add more dump information for PCIe interfaceAmitkumar Karwar
We will now dump MAC, APU, CIU, ICU firmware memory segments also for PCIe interface. Following is the updated userspace script which reads firmware dump information. mwifiex_pcie_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/IRAM.log ethtool --set-dump mlan0 4 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/APU.log ethtool --set-dump mlan0 5 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/CIU.log ethtool --set-dump mlan0 6 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ICU.log ethtool --set-dump mlan0 7 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/MAC.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-30mwifiex: error path handling in pcie firmware dumpAmitkumar Karwar
This patch takes care of missing error paths in firmware dump. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: add rx workqueue supportAvinash Patil
This patch adds RX work queue support to mwifiex. Packets received are queued to internal queue which are then processed by scheduling a work item for RX process. RX work is enabled only on SMP systems. Reviewed-by: James Cameron <quozl@laptop.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: support for event done interruptAvinash Patil
This patch adds support for writing CPU event interrupt done back to device. Patch also increases interrupt buffer ring size from 4 to 8. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15mwifiex: avoid processing RX packets with invalid lengthAvinash Patil
If rx_len received in interface header from FW is more than RX buffer size, skb_put for such length results into skb_panic. Avoid this by not processing such packets. We just print a warning for such packets and free skb. Reviewed-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-18mwifiex: remove redundant timestamps in debug printsBing Zhao
We don't need wall-clock time here, and in most configurations that care, there are already timestamps in the kernel using CONFIG_PRINTK_TIME=y. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-10Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-06-25mwifiex: update Copyright to 2014Xinming Hu
This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: add firmware dump feature for PCIeAmitkumar Karwar
Firmware dump feature is added for PCIe based chipsets which can be used with the help of ethtool commands. 1) Trigger firmware dump operation: ethtool --set-dump mlan0 0xff When the operation is completed, udev event will be sent to trigger external application. 2) Following udev rule can be used to get the data from ethtool: DRIVER=="mwifiex_pcie", ACTION=="change", RUN+="/sbin/mwifiex_pcie_fw_dump.sh" mwifiex_pcie_fw_dump.sh: #!/bin/bash ethtool --set-dump mlan0 0 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/ITCM.log ethtool --set-dump mlan0 1 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/DTCM.log ethtool --set-dump mlan0 2 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/SQRAM.log ethtool --set-dump mlan0 3 ethtool --get-dump mlan0 ethtool --get-dump mlan0 data /tmp/IRAM.log Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16mwifiex: fix tx_info/rx_info overlap with PCIe dma_mappingChin-Ran Lo
On PCIe Tx data path, network interface specific tx_info parameters such as bss_num and bss_type are saved at "skb->cb + sizeof(dma_addr_t)" (returned by MWIFIEX_SKB_TXCB). Later mwifiex_map_pci_memory() called from mwifiex_pcie_send_data() will memcpy sizeof(struct mwifiex_dma_mapping) bytes to save PCIe DMA address and length information at beginning of skb->cb. This accidently overwrites bss_num and bss_type saved in skb->cb previously because bss_num/bss_type and mwifiex_dma_mapping data overlap. Similarly, on PCIe Rx data path, rx_info parameters overlaps with PCIe DMA address and length information too. Fix it by defining mwifiex_cb structure and having MWIFIEX_SKB_TXCB and MWIFIEX_SKB_RXCB return the correct address of tx_info/rx_info using the structure members. Also add a BUILD_BUG_ON to maks sure that mwifiex_cb structure doesn't exceed the size of skb->cb. Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Chin-Ran Lo <crlo@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-16mwifiex: set valid tx_param during mwifiex_send_null_packetAvinash Patil
While sending null packet from driver we are passing NULL tx_param pointer to indicate there are no more packets in queue. PCIe send routine assumes caller has done sanity check on tx_param and may cause crash while dereferencing next_pkt_len from tx_param. Avoid this by passing tx_param structure with next_pkt_len as zero instead of NULL pointer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-24Revert "mwifiex: add firmware dump feature for PCIe"John W. Linville
This reverts commit e050c76fcf49599c5b98e4614392dc87c69123a6. I'm not sure what crack pipe I was using when I merged this... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: add firmware dump feature for PCIeAmitkumar Karwar
Firmware dump feature is added for PCIe based chipsets. Separate file will be created at /var/log/fw_dump_* for each memory segment. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-22mwifiex: remove redundant 'fw_load' completion structureAmitkumar Karwar
'add_remove_card_sem' semaphore already takes care of synchronization for driver load and unload threads. Hence there won't be a case when unload thread is waiting on 'wait_for_completion(fw_load)'. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: cancel pending commands during host sleepAmitkumar Karwar
Sometimes we may end up downloading other commands when host sleep is configured. This patch makes sure that pending commands are cancelled and we stop queueing further commands during host sleep. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-27mwifiex: Remove casts of pointer to same typeJoe Perches
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-19mwifiex: add support for sleep cookie in PCIeAvinash Patil
This patch adds support to read sleep cookie for command response before accessing buffer. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c
2014-02-28mwifiex: stop AP at shutdown timeAmitkumar Karwar
Deauth is sent to AP when the device is acting as station at shutdown time. Similarly we should stop AP operation also. mwifiex_deauthenticate() takes care closing the connection based on provided interface type. Add a new function to simplify the code. Reported-by: Avery Pennarun <apenwarr@gmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: change transmit buffer size for 8897Amitkumar Karwar
Currently default Tx buffer size configured to firmware is 2K for all chipsets. This patch changes it to 4K for SD/PCIe/USB 8897 chipsets as per firmware requirements. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-20mwifiex: fix cmd and Tx data timeout issue for PCIe cardsAmitkumar Karwar
We are sending sleep confirm done interrupt in the middle of sleep handshake. There is a corner case when Tx done interrupt is received from firmware during sleep handshake due to which host and firmware power states go out of sync causing cmd and Tx data timeout problem. Hence sleep confirm done interrupt is sent at the end of sleep handshake to fix the problem. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-20mwifiex: add NULL check for PCIe Rx skbAmitkumar Karwar
We may get a NULL pointer here if skb allocation for Rx packet was failed earlier. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: don't leak DMA command skbuffsAaron Durbin
The current mwifiex pcie driver assumed that it would get its cmdrsp_complete() callback called before another command was sent to unmap the command's skbuff. However, that is not true. The mwifiex_check_ps_cond() will send a sleep command to the card without having adapter->curr_cmd set. Within the workqueue's state machine the adapter's state would be set to allow commands (curr_cmd = NULL && cmd_sent = false) after having receieved the response from the sleep command. The card->cmd_buf would then be overridden with the new command but the first command's skbuff was not unmapped. This leaks mapped skbuffs when a bounce buffer is employed. To rectify this unmap the card->cmd_buf when the response is received from the card instead of waiting for the cmdrsp_complete() callback. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: balance dma map/unmap sizesAaron Durbin
Depending on the underlying DMA implementation its not possible to partially unmap DMA buffers. Moreover its not possible to understand the intent of passing 0 as the size to dma unmap. The intent of this driver is unmap the entire skb buffer. The only way to ensure that the size matches on unmap is to store both the dma address and the size in the skb ca field. Introduce a mwifiex_dma_mapping structure which tracks the dma address and the size. Additionally, provide a mwifiex_unmap_pci_memory() that utilizes the new structure. This also provide symmetry within the internal API. Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-15mwifiex: fix memory leak issue for sdio and pcie cardsAmitkumar Karwar
When driver is failed to load, card pointer doesn't get freed. We will free it in cleanup handler which is called in failure as well as unload path. Also, update drvdata in init/cleanup handlers instead of register/unregister handlers. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26mwifiex: Remove casting the return value which is a void pointerJingoo Han
Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: correction in mwifiex_check_fw_status() return statusAmitkumar Karwar
For PCIe cards, when wrong firmware is downloaded, firmware is failed to be ready in 10 seconds. We should return an error at this point. But currently we are sending first command to firmware. As expected firmware doesn't respond to this command and command timeout occurs. This patch fixes the problem by removing unnecessary 'ret' variable modifications in "if (ret) {" block. The block is just supposed to update "adapter->winner" flag. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: replace mdelay with msleepAmitkumar Karwar
It is observed that when wrong firmware is downloaded for PCIe card, system hangs for 10 seconds. The reason is mdelay() is used when firmware status is polled. Replace mdelay with msleep(non-blocking API) to fix the issue. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: add PCIe shutdown handler to avoid system hang on rebootAmitkumar Karwar
If reboot command is issued when device is in connected state, system hangs while booting. This issue is fixed by doing cleanup in shutdown handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-22wireless: Convert mwifiex/pcie to dev_pm_ops from legacy pm_opsShuah Khan
Convert the mwifiex/pci driver to use dev_pm_ops for power management and remove Legacy PM handling. This change re-uses existing suspend and resume interfaces for dev_pm_ops, and changes CONFIG_PM ifdefs to CONFIG_PM_SLEEP as the driver does not support run-time PM. Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-26mwifiex: Correct pci_unmap_single's sizeYogesh Ashok Powar
There exist mismatch between the size used for pci_map and pci_unmap on command skb. Correcting it. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-01 14:45:01 +0000