| Age | Commit message (Collapse) | Author |
|---|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.12
The last -next "new features" pull request for v6.12. The stack now
supports DFS on MLO but otherwise nothing really standing out.
Major changes:
cfg80211/mac80211
* EHT rate support in AQL airtime
* DFS support for MLO
rtw89
* complete BT-coexistence code for RTL8852BT
* RTL8922A WoWLAN net-detect support
* tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits)
wifi: brcmfmac: cfg80211: Convert comma to semicolon
wifi: rsi: Remove an unused field in struct rsi_debugfs
wifi: libertas: Cleanup unused declarations
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe()
wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe()
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext()
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
wifi: cfg80211: fix kernel-doc for per-link data
wifi: mt76: mt7925: replace chan config with extend txpower config for clc
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
wifi: mt76: mt7615: check devm_kasprintf() returned value
wifi: mt76: mt7925: convert comma to semicolon
wifi: mt76: mt7925: fix a potential association failure upon resuming
wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
wifi: mt76: mt7921: Check devm_kasprintf() returned value
wifi: mt76: mt7915: check devm_kasprintf() returned value
wifi: mt76: mt7915: avoid long MCU command timeouts during SER
wifi: mt76: mt7996: fix uninitialized TLV data
...
====================
Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.12
This is once again a fairly light pull request since ath12k is still
working on MLO-related changes, and the other drivers are mostly in
maintenance mode.
ath12k
* Fix a frame-larger-than warning seen with debug builds
* Fix flex-array-member-not-at-end warnings
ath11k
* Fix flex-array-member-not-at-end warnings
ath9k
* Fix a syzbot-reported issue on USB-based devices
|
|
mt76 patches for 6.12
- fixes
- mt7915 .sta_state support
- mt7915 hardware restart improvements
|
|
rtw-next patches for v6.12
The rtw89 is continuously adjusting code to support MLO. The major changes
are listed below:
rtw88:
* fix USB not transmitting beacon in AP mode
rtw89:
* complete BT-coexistence code for RTL8852BT
* fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT
* enable WoWLAN net-detect for more one chip, RTL8922A
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904074637.1352864-1-nichen@iscas.ac.cn
|
|
dfs_get_ops has apparently never been used since its introduction by
commit dad0d04fa7ba ("rsi: Add RS9113 wireless driver") in 2014-03.
More-over struct rsi_dbg_ops is not defined.
Remove the unused field from struct rsi_debugfs.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/15b0609d7b1569ec6c500a175caef4c9189f33e2.1725394207.git.christophe.jaillet@wanadoo.fr
|
|
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903115811.958692-1-yuehaibing@huawei.com
|
|
wilc_bus_probe()
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903110205.4127706-3-lizetao1@huawei.com
|
|
wilc_sdio_probe()
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path, drop
the clk_disable_unprepare label, and the original error process can change
to dispose_irq.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903110205.4127706-2-lizetao1@huawei.com
|
|
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
|
|
mwifiex_cmd_802_11_scan_ext()
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto
|
|
Since MT792x_CLC_CHAN is currently not in use, we have added an
extension for setting txpower to replace it.
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240819015334.14580-2-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Due to the lack of checks on the clc array, if the firmware supports
more clc configuration, it will cause illegal memory access.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240819015334.14580-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 0bb4e9187ea4 ("mt76: mt7615: fix hwmon temp sensor mem use-after-free")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240905014753.353271-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240904075213.1352976-1-nichen@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In multi-channel scenarios, the granted channel must be aborted before
suspending. Otherwise, the firmware will be put into a wrong state,
resulting in an association failure after resuming.
With this patch, the granted channel will be aborted before suspending
if necessary.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240902090054.15806-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `struct_group_tagged()`
helper to create a new tagged `struct mt76_connac2_mcu_rxd_hdr`.
This structure groups together all the members of the flexible
`struct mt76_connac2_mcu_rxd` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct mt76_connac2_mcu_rxd` to `struct
mt76_connac2_mcu_rxd_hdr`.
We also want to ensure that when new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct mt76_connac2_mcu_rxd_hdr`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:32:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:40:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:49:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h:58:37: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/Zr5KsZugaEXrApQJ@elsanto
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014955.4145423-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Immediately abort MCU commands when firmware requests DMA restart.
Link: https://patch.msgid.link/20240827093011.18621-24-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Use skb_put_zero instead of skb_put
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://patch.msgid.link/20240827093011.18621-23-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
When offloading is enabled, the software rx path may not have the latest
rate information.
Link: https://patch.msgid.link/20240827093011.18621-22-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix rx filter setting to prevent dropping NDPA frames. Without this
change, bfee functionality may behave abnormally.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-21-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reuse one bit from the length field for skip_unmap
Link: https://patch.msgid.link/20240827093011.18621-20-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
- use reconfig_complete to restart mac_work / queues
- reset full wtbl after firmware init
- clear wcid and vif mask to avoid leak
- fix sta poll list corruption
Link: https://patch.msgid.link/20240827093011.18621-19-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for reusing it in mt7915
Link: https://patch.msgid.link/20240827093011.18621-18-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Prevent racing against other functions disabling the same worker
Link: https://patch.msgid.link/20240827093011.18621-17-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Currently, CONNAC2 series do not support encryption for fragmented Tx frames.
Therefore, add dummy function mt7915_set_frag_threshold() to prevent SW
IEEE 802.11 fragmentation.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-16-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
On MT7915, MCU hangs do not trigger watchdog interrupts, so they can only
be detected through MCU message timeouts. Ensure that the hardware gets
restarted when that happens in order to prevent a permanent stuck state.
Link: https://patch.msgid.link/20240827093011.18621-15-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
In some cases MCU messages can get lost. Instead of failing completely,
attempt to recover by re-sending them.
Link: https://patch.msgid.link/20240827093011.18621-14-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
This avoids running into unnecessary timeouts waiting for MCU responses
Link: https://patch.msgid.link/20240827093011.18621-13-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Allows adding stations before assoc, though they are not passed to the
firmware yet at that point.
Link: https://patch.msgid.link/20240827093011.18621-12-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Also report auth/disassoc events, in order to give the driver more control over
handling the station state.
Link: https://patch.msgid.link/20240827093011.18621-11-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Preparation for improvements to sta handling. No functional changes.
Link: https://patch.msgid.link/20240827093011.18621-10-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Add fragmentation index into TXD.DW2 to support IEEE 802.11 fragmentation.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-9-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Reduces the amount of unnecessary WTBL bank switching, while still reserving
WTBL entries for vifs.
Link: https://patch.msgid.link/20240827093011.18621-8-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Avoids firmware race condition.
Link: https://patch.msgid.link/20240827093011.18621-7-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Ensure that packets are not sent out to the wrong channel
Link: https://patch.msgid.link/20240827093011.18621-6-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Currently DFS works under assumption there could be only one channel
context in the hardware. Hence, drivers just calls the function
ieee80211_radar_detected() passing the hardware structure. However, with
MLO, this obviously will not work since number of channel contexts will be
more than one and hence drivers would need to pass the channel information
as well on which the radar is detected.
Also, when radar is detected in one of the links, other link's CAC should
not be cancelled.
Hence, in order to support DFS with MLO, do the following changes -
* Add channel context conf pointer as an argument to the function
ieee80211_radar_detected(). During MLO, drivers would have to pass on
which channel context conf radar is detected. Otherwise, drivers could
just pass NULL.
* ieee80211_radar_detected() will iterate over all channel contexts
present and
* if channel context conf is passed, only mark that as radar
detected
* if NULL is passed, then mark all channel contexts as radar
detected
* Then as usual, schedule the radar detected work.
* In the worker, go over all the contexts again and for all such context
which is marked with radar detected, cancel the ongoing CAC by calling
ieee80211_dfs_cac_cancel() and then notify cfg80211 via
cfg80211_radar_event().
* To cancel the CAC, pass the channel context as well where radar is
detected to ieee80211_dfs_cac_cancel(). This ensures that CAC is
canceled only on the links using the provided context, leaving other
links unaffected.
This would also help in scenarios where there is split phy 5 GHz radio,
which is capable of DFS channels in both lower and upper band. In this
case, simultaneous radars can be detected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-9-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, during starting a radar detection, no link id information is
parsed and passed down. In order to support starting radar detection
during Multi Link Operation, it is required to pass link id as well.
Add changes to first parse and then pass link id in the start radar
detection path.
Additionally, update notification APIs to allow drivers/mac80211 to
pass the link ID.
However, everything is handled at link 0 only until all API's are ready to
handle it per link.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-6-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
A few members related to DFS handling are currently under per wireless
device data structure. However, in order to support DFS with MLO, there is
a need to have them on a per-link manner.
Hence, as a preliminary step, move members cac_started, cac_start_time
and cac_time_ms to be on a per-link basis.
Since currently, link ID is not known at all places, use default value of
0 for now.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20240906064426.2101315-5-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Replace the ifdef CONFIG_PM by CONFIG_PM_SLEEP. CONFIG_PM was useful
when we had CONFIG_PM_RUNTIME but that was removed long ago.
Use PM_SLEEP consistently across the driver.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.44e47ba584de.I64f985d0405345252b76b7157291b79677abd64d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This allows the core code to change the channel. Code deduplication and
preparation for adding scanning code to the core.
Link: https://patch.msgid.link/20240828063422.44813-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Do not assume that the first phy has 2 GHz support.
Check sband->band instead of accessing dev->phy.sband_2g.
Link: https://patch.msgid.link/20240827093011.18621-4-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fixes reported tx power by accounting for the combined output
Link: https://patch.msgid.link/20240827093011.18621-3-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
If the ext-PA target power is unset, fall back to the standard EEPROM value.
Link: https://patch.msgid.link/20240827093011.18621-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Move the qid variable declaration further up
Fixes: b473c0e47f04 ("wifi: mt76: mt7603: fix tx queue of loopback packets")
Link: https://patch.msgid.link/20240827093011.18621-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix incorrect RXD offset and bitfield related to RX checksum offload.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Fixes: 4e9011fcdfc4 ("wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20240816095040.2574-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he
routine adding an sta interface to the mt7996 driver.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240813081242.3991814-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
