summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2015-04-03i40evf: Refactor VF RSS codeAnjali Singhai Jain
Refactor VF RSS code to allow RSS on a single queue and eliminate the need for the next_queue function. Change-ID: I9253bad96b7f542ee7036e15636db0e5d58d8ef2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: protect VLAN filter listMitch Williams
The MAC filter list is protected by a critical task bit, and the VLAN list should be protected as well. This prevents list corruption if the watchdog happens to run at the same time as a VLAN filter is being added or deleted. Change-ID: Ia4867cebbbb046a1f38012771b288a634ca5882b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Communicate VSI id in place of VSI index to the VFsAnjali Singhai Jain
This does not affect the Virtual channel API as such but it changes the meaning of what is communicated to the VSI resource struct as vsi_id. Earlier vsi_idx was being passed in, which was the index in the PF's VSI array. Now we pass vsi_id as communicated by the FW to the driver. This will help with future expansion of VF and FW communication. With this in place now the VF and Virtual channel driver change to move over to VSI id use is complete and is validated. Change-ID: I14246ef82b3b3dc1fa76291d2dd0c05d12cedb7c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: stop flow director on shutdownMitch Williams
In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: Ib98060d6352ec595ab9a78bfe252675a9fa5d8bc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: fix up VXLAN messagesShannon Nelson
When the VXLAN ports are added and removed, the messaging was giving some bogus index info, the port was always '0' for the delete, and the message text style didn't match other messages in the driver. Also, there was an over-use of the tertiary statement which made reading a little harder than necessary. Change-ID: Ie805182a697b8b4c12024403ada87fd4e4fa2358 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Don't register/de-register apps on NIC partitions in MFP modeNeerav Parikh
Do not register or try to de-register DCB applications with the DCBNL layer in case of NIC partitions when adapter is in MFP mode. Change-ID: I603d042a61983a6562be471c6a2b181572504118 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: Set Ethernet protocol correctly when Tx VLAN offloads are disabledGreg Rose
If transmit VLAN HW offloads are disabled then the network stack sends up an skb with the protocol set to 8021q. In that case to get the correct checksum offloads we have to reset the skb protocol to the encapsulated ethertype. Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: warn at the right timeMitch Williams
The call to pci_disable_sriov got moved, but the message about not disabling VFs didn't move. So move it. While we're at, reword the message a bit to make it more consistent with other driver messages. Change-ID: I17d3e15e4fcfd5c9431a96ecb0117d728d3da18b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: fix invalid void return in FCoE codeJesse Brandeburg
A function was calling i40e_tx_map with return, but tx_map returns void, and the caller returns void, so just drop the return, and everything is good. Change-ID: I53fc676d517864761e7cbb8ca83f1ef0c15b1f8f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e/i40evf: fix bug when skb allocation failsJesse Brandeburg
If the skb allocation fails we should not continue using the skb pointer. Breaking out at the point of failure means that at the next RX interrupt the driver will try the allocation again. Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Change some memcpys to struct assignmentsJesse Brandeburg
Several memcpys are not necessary and can be changed to structure assignments. Struct assignments are always type safe so this is preferable. Change-ID: I7daf45a4b5e799c686b9d5c8ba9db047584ab82b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: Print some more info to help figure out the cause of HMC errorAnjali Singhai Jain
HMC_ERRORINFO and HMC_ERRORDATA helps explain the cause of HMC error. Change-ID: I053bbc175a5f4c5c3e9ec2ea7400d5c56aaa4ec1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40e: validate VSI param from VFsMitch Williams
Validate that the VF has sent us a valid VSI index before actually using that index. Without this code, a malicious or buggy VF driver could panic the host by sending an invalid index into the VSI array. Change-ID: I66a177687a0dcc281ec83e714d3813d70d18c8b4 Reported-by: Nick Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-03i40evf: Fix Outer UDP RX checksum codeAnjali Singhai Jain
Inner protocol being UDP should not stop us from verifying Outer UDP checksum correctness. If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP checksum check. If the packet has zero checksum, skip checksum check. Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-02net/mlx5_core: Extend struct mlx5_interface to support multiple protocolsSaeed Mahameed
Preparation for ethernet driver. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_coreSaeed Mahameed
Preparation for ethernet driver. These functions will be used in drivers other than mlx5_ib. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Update module info macros for ConnectX4 SupportAchiad Shochat
Declare the support of new ConnectX4 HCA in module info Pump up the module version Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Fix Mellanox copyright noteSaeed Mahameed
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Fix a bug in alloc_tokenAchiad Shochat
In alloc_token(), the token '1' would be allocated twice consecutively. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Avoid usage command work entry after writing command doorbellIra Gusinsky
Avoid usage of command work entry in cmd_work_handler since it can be released by mlx5_cmd_invoke before the work handler returns to running. Signed-off-by: Ira Gusinsky <irenag@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Avoid copying outbox in aysnc command completionEli Cohen
Avoid copying to the output buffer in cmd_exec since this is done after the command is completed. Failure to do this may cause cases where the callback handler is called before the copy done by cmd_exec which then overwrites it. Reported-by: Tamer Hleihel <tamerh@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Use coherent memory for command interface pageEli Cohen
Use coherent memory for the commands descriptor page. Take measures to make sure the page is aligned to MLX5_ADAPTER_PAGE_SIZE as required by the hardware. Reported-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Use the right inbox struct in destroy mkey commandAchiad Shochat
struct mlx5_query_mkey_mbox_in rather than mlx5_destroy_mkey_mbox_in Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Clear doorbell record inside mlx5_db_alloc()Saeed Mahameed
Do it in one place instead of every where the function is invoked Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Avoid setting DC requestor/responder resourcesEli Cohen
PRM does not support setting these values so avoid setting them. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx5_core: Allocate firmware pages from device's NUMA nodeEli Cohen
Allocate firmware pages from the NUMA node which is close to the device. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4_en: Add RX-ALL supportMuhammad Mahajna
Enabled when the device supports KEEP FCS and IGNORE FCS. When the flag is set, pass all received frames up the stack, even ones with invalid FCS, controlled by ethtool. Signed-off-by: Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4_en: Add RX-FCS supportMuhammad Mahajna
Enabled when device supports KEEP FCS. When the flag is set, Ethernet FCS is appended to the end of the frame, controlled by ethtool. Signed-off-by: Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4_en: Add interface identify supportIdo Shamay
Add support for the interface ethtool identify feature. Make the physical port LED to blink with green and yellow colors. The device handles the LED blink by itself (synchrous use of set_phys_id), by returning 0 to ETHTOOL_ID_ACTIVE command. Signed-off-by: Eyal Grossman <eyalgr@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Add SET_PORT opcode modifiers enumerationIdo Shamay
The calls to SET_PORT used hard-code numbers, when supplying command's opcode modifiers, fix that to use well defined constants. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Set enhanced QoS support by default when ETS supportedIdo Shamay
If HCA supports ETS QoS feature, set enhanced QoS bit in init_hca as default. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Warn users of depracated QoS FirmwareIdo Shamay
A new capability bit was introduced in the past to to differ devices using the QoS ETS feature. The old was deprecated since then. If driver sees device which set only the old capabilty, it will print warning to user suggesting to upgrade the FW. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4_en: Enable TX rate limit per VFIdo Shamay
Support granular QoS per VF, by implementing the ndo_set_vf_rate. Enforce a rate limit per VF when called, and enabled only for VFs in VST mode with user priority supported by the device. We don't enforce VFs to be in VST mode at the moment of configuration, but rather save the given rate limit and enforce it when the VF is moved to VST with user priority which is supported (currently 0). VST<->VGT or VST qos value state changes are disallowed when a rate limit is configured. Minimum BW share is not supported yet. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Added qos_vport QP configuration in VST modeIdo Shamay
Granular QoS per VF feature introduce a new QP field, qos_vport. PF administrator can connect VF QPs to a certain QoS Vport, to inherit its proporties. Connecting QPs to the default QoS Vport (defined as 0) is always allowed, even when there are no allocated VPPs. At this point, only the default vport is connected to QPs. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Allocate VPPs for each port on PF initIdo Shamay
Initialization of granular Qos per VF mechanism. Query the port availible VPPs and allocates those on all supported priorities in an equal share. Allocation is done only in SRIOV mode, when the feature is supported by the device and port type is Ethernet. Allocation currently is done only on the default priority 0. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Query device for QoS per VF supportIdo Shamay
Checks in QUERY_DEV_CAP if the granular QoS per VF feature is supported by the device. Disabled for guests. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Add mlx4_SET_VPORT_QOS implementationIdo Shamay
Add the SET_VPORT_QOS device command, which is ntended for virtual granular QoS configuration per VF in SRIOV mode. The SET_VPORT_QOS command sets and queries QoS parameters of a VPort. Each priority allowed for a VPort is assigned with a share of the BW, and a BW limitation. QoS parameters can be modified at any time, but must be initialized before any QP is associated with the VPort. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Add mlx4_ALLOCATE_VPP implementationIdo Shamay
Implements device ALLOCATE_VPP command, to be used for granular QoS configuration of VFs by the PF device. Defines and queries the amount of VPPs assigned to each port, and the amount of VPPs assigned to each priority of each port. Once the total VPPs are split between the priorities of a port, they may be assigned with a share of the BW or a rate limit. Split into two functions (get/set) whoch are supplied with mlx4_alloc_vpp_context and physical port number. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: New file for QoS related firmware commandsIdo Shamay
Create two new files fw_qos.h and fw_qos.c in mlx4_core module. It gathers all relevant QoS firmware related commands etc, thus improving encapsulation of the mlx4_core module. For now it contains the QoS existing commands: mlx4_SET_PORT_SCHEDULER and mlx4_SET_PORT_PRIO2TC. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Aesthetic code changes in multi_func_initIdo Shamay
Previous vf_oper and vf_admin code created very long lines, making it hard to read the code. Added relevant in-struct pointers to reduce code complexity and avoid code lines spread over 80 lines. Same logic is preserved. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Make mlx4_is_eth visible inline funcionIdo Shamay
Currently implemented as static function in resource_tracker.c -- this change will allow other files in mlx4_core to use it as well. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4_en: Change loopback only upon feature changeIdo Shamay
Currently any change of netdev features results in a call to mlx4_en_update_loopback_state(). Those calls are unnecessary, and should be called only upon loopback feature change. Also moved some of the logic into mlx4_en_update_loopback_state(). Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: Add RSS support for fragmented IP datagramsIdo Shamay
Enable RSS support for fragmented IP packets, when device supports it. Until now, fragmented IP packets were directed only to the default_qpn. Since IP fragments (datagram) have no upper protocols (L3 IP packets), hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW makes sure that this holds for the 1st fragment too, so all fragments go to the same QP. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02veth: set iflink to the peer vethNicolas Dichtel
Now that the peer netns is advertised in rtnl messages, we can set this property so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get the full veth configuration. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02ipvlan: implement ndo_get_iflinkNicolas Dichtel
Don't use dev->iflink anymore. CC: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02macvlan: implement ndo_get_iflinkNicolas Dichtel
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02dev: introduce dev_get_iflink()Nicolas Dichtel
The goal of this patch is to prepare the removal of the iflink field. It introduces a new ndo function, which will be implemented by virtual interfaces. There is no functional change into this patch. All readers of iflink field now call dev_get_iflink(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: mv88e6xxx: Fix stats counters for 6352 familyAndrew Lunn
The statistic counters for the mv88e6172 never worked. This device is a member of the 6352 family of chips, which has a slightly different layout of the register used for capturing statistics. Add support for detecting this family and poking the port in the right place in the register. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01net: dsa: Use mnemonics rather than register numbersAndrew Lunn
Rather than refer to registers by number, define mnemonics. Also define mnemonics for the commonly used bits within the registers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>