summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-10-28Revert "net: hns3: fix pause config problem after autoneg disabled"Guangbin Huang
This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c. According to discussion with Andrew as follow: https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/ HNS3 driver needs to separate pause autoneg from general autoneg, so revert this incorrect patch. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28octeontx2-af: Fix possible null pointer dereference.Rakesh Babu Saladi
This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" Fixes: 8756828a8148 ("octeontx2-af: Add NPA aura and pool contexts to debugfs") Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28octeontx2-af: Display all enabled PF VF rsrc_alloc entries.Rakesh Babu
Currently, we are using a fixed buffer size of length 2048 to display rsrc_alloc output. As a result a maximum of 2048 characters of rsrc_alloc output is displayed, which may lead sometimes to display only partial output. This patch fixes this dependency on max limit of buffer size and displays all PF VF entries. Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12 characters to print the list of LFs of each block for a PF/VF. If the length of list of LFs of a block exceeds this fixed width then the list gets truncated and displays only a part of the list. This patch fixes this by using the maximum possible length of list of LFs among all blocks of all PFs and VFs entries as the width size. Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status") Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28octeontx2-af: Check whether ipolicers existsSubbaraya Sundeep
While displaying ingress policers information in debugfs check whether ingress policers exist in the hardware or not because some platforms(CN9XXX) do not have this feature. Fixes: e7d8971763f3 ("octeontx2-af: cn10k: Debugfs support for bandwidth") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Rakesh Babu <rsaladi2@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28net: ethernet: microchip: lan743x: Fix skb allocation failureYuiko Oshino
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28nfp: bpf: relax prog rejection for mtu check through max_pkt_offsetYu Xiao
MTU change is refused whenever the value of new MTU is bigger than the max packet bytes that fits in NFP Cluster Target Memory (CTM). However, an eBPF program doesn't always need to access the whole packet data. The maximum direct packet access (DPA) offset has always been caculated by verifier and stored in the max_pkt_offset field of prog aux data. Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com> Reviewed-by: Niklas Soderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-28vmxnet3: do not stop tx queues after netif_device_detach()Dongli Zhang
The netif_device_detach() conditionally stops all tx queues if the queues are running. There is no need to call netif_tx_stop_all_queues() again. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27r8169: Add device 10ec:8162 to driver r8169Janghyub Seo
This patch makes the driver r8169 pick up device Realtek Semiconductor Co. , Ltd. Device [10ec:8162]. Signed-off-by: Janghyub Seo <jhyub06@gmail.com> Suggested-by: Rushab Shah <rushabshah32@gmail.com> Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27usbnet: fix error return code in usbnet_probe()Wang Hai
Return error code if usb_maxpacket() returns 0 in usbnet_probe() Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-27net: hns3: adjust string spaces of some parameters of tx bd info in debugfsGuangbin Huang
This patch adjusts the string spaces of some parameters of tx bd info in debugfs according to their maximum needs. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: expand buffer len for some debugfs commandGuangbin Huang
The specified buffer length for three debugfs files fd_tcam, uc and tqp is not enough for their maximum needs, so this patch fixes them. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs") Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: add more string spaces for dumping packets number of queue info ↵Jie Wang
in debugfs As the width of packets number registers is 32 bits, they needs at most 10 characters for decimal data printing, but now the string spaces is not enough, so this patch fixes it. Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: fix data endian problem of some functions of debugfsJie Wang
The member data in struct hclge_desc is type of __le32, it needs endian conversion before using it, and some functions of debugfs didn't do that, so this patch fixes it. Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: ignore reset event before initialization process is doneGuangbin Huang
Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND modeYufeng Mo
Currently, the workqueue of hclge/hclgevf is executed on the CPU that initiates scheduling requests by default. In stress scenarios, the CPU may be busy and workqueue scheduling is completed after a long period of time. To avoid this situation and implement proper scheduling, use the WQ_UNBOUND mode instead. In this way, the workqueue can be performed on a relatively idle CPU. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-27net: hns3: fix pause config problem after autoneg disabledGuangbin Huang
If a TP port is configured by follow steps: 1.ethtool -s ethx autoneg off speed 100 duplex full 2.ethtool -A ethx rx on tx on 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off) 4.ethtool -s ethx autoneg off speed 100 duplex full In step 3, driver will set rx&tx pause parameters of hardware to off as pause parameters negotiated with link partner are off. After step 4, the "ethtool -a ethx" command shows both rx and tx pause parameters are on. However, pause parameters of hardware are still off and port has no flow control function actually. To fix this problem, if autoneg is disabled, driver uses its saved parameters to restore pause of hardware. If the speed is not changed in this case, there is no link state changed for phy, it will cause the pause parameter is not taken effect, so we need to force phy to go down and up. Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26net: lan78xx: fix division by zero in send pathJohan Hovold
Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-26Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-25 This series contains updates to ice driver only. Dave adds event handler for LAG NETDEV_UNREGISTER to unlink device from link aggregate. Yongxin Liu adds a check for PTP support during release which would cause a call trace on non-PTP supported devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25mlxsw: pci: Recycle received packet upon allocation failureIdo Schimmel
When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: <IRQ> dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25ice: check whether PTP is initialized in ice_ptp_release()Yongxin Liu
PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25ice: Respond to a NETDEV_UNREGISTER event for LAGDave Ertman
When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-25xen/netfront: stop tx queues during live migrationDongli Zhang
The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25net: nxp: lpc_eth.c: avoid hang when bringing interface downTrevor Woerner
A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner <twoerner@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Lock the PHY while changing settingsAndrew Lunn
There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll <Walter.Stoll@duagon.com> Suggested-by: Walter Stoll <Walter.Stoll@duagon.com> Tested-by: Walter Stoll <Walter.Stoll@duagon.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_start_aneg: Add an unlocked versionAndrew Lunn
Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_set: Move after phy_start_anegAndrew Lunn
This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-25phy: phy_ethtool_ksettings_get: Lock the phy for consistencyAndrew Lunn
The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix dma allocation failure by using ↵Yuiko Oshino
dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume failsYuiko Oshino
The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21usbnet: sanity check for maxpacketOliver Neukum
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <oneukum@suse.com> Reported-by: syzbot+76bb1d34ffa0adc03baa@syzkaller.appspotmail.com Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211021122944.21816-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: make sure all traffic classes can send large framesVladimir Oltean
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <richard.pearn@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020173340.1089992-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21net: enetc: fix ethtool counter name for PM0_TERRVladimir Oltean
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: <Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20211020165206.1069889-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-21sfc: Don't use netif_info before net_device setupErik Ekman
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21sfc: Export fibre-specific supported link modesErik Ekman
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <erik@kryo.se> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-21Merge tag 'mlx5-fixes-2021-10-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flagsEmeel Hakim
Current Work Queue Entry (WQE) checksum (csum) flags in the ethernet segment (eseg) in case of IPsec crypto offload datapath are not aligned with PRM/HW expectations. Currently the driver always sets the l3_inner_csum flag in case of IPsec because of the wrong usage of skb->encapsulation as indicator for inner IPsec header since skb->encapsulation is always ON for IPsec packets since IPsec itself is an encapsulation protocol. The above forced a failing attempts of calculating csum of non-existing segments (like in the IP|ESP|TCP packet case which does not have an l3_inner) which led to lots of packet drops hence the low throughput. Fix by using xo->inner_ipproto as indicator for inner IPsec header instead of skb->encapsulation in addition to setting the csum flags as following: * Tunnel Mode: * Pkt: MAC IP ESP IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs * * Transport Mode: * Pkt: MAC IP ESP L4 * CSUM: l3_cs [ | l4_cs (checksum partial case)] * * Tunnel(VXLAN TCP/UDP) over Transport Mode * Pkt: MAC IP ESP UDP VXLAN IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5e: IPsec: Fix a misuse of the software parser's fieldsEmeel Hakim
IPsec crypto offload current Software Parser (SWP) fields settings in the ethernet segment (eseg) are not aligned with PRM/HW expectations. Among others in case of IP|ESP|TCP packet, current driver sets the offsets for inner_l3 and inner_l4 although there is no inner l3/l4 headers relative to ESP header in such packets. SWP provides the offsets for HW ,so it can be used to find csum fields to offload the checksum, however these are not necessarily used by HW and are used as fallback in case HW fails to parse the packet, e.g when performing IPSec Transport Aware (IP | ESP | TCP) there is no need to add SW parse on inner packet. So in some cases packets csum was calculated correctly , whereas in other cases it failed. The later faced csum errors (caused by wrong packet length calculations) which led to lots of packet drops hence the low throughput. Fix by setting the SWP fields as expected in a IP|ESP|TCP packet. the following describe the expected SWP offsets: * Tunnel Mode: * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP IP L4 * * Transport Mode: * SWP: OutL3 OutL4 * Pkt: MAC IP ESP L4 * * Tunnel(VXLAN TCP/UDP) over Transport Mode * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP UDP VXLAN IP L4 Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5e: Fix vlan data lost during suspend flowMoshe Shemesh
During suspend flow the driver calls mlx5e_destroy_vlan_table() which does not only delete the vlans steering flow rules, but also frees the data on currently active vlans, thus it is not restored during resume flow. This fix keeps the vlan data on suspend flow and frees it only on driver remove flow. Fixes: 6783f0a21a3c ("net/mlx5e: Dynamic alloc vlan table for netdev when needed") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5: E-switch, Return correct error code on group creation failureDmytro Linkin
Dan Carpenter report: The patch f47e04eb96e0: "net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups" from May 31, 2021, leads to the following Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c:483 esw_qos_create_rate_group() warn: passing zero to 'ERR_PTR' If min rate normalization failed then error code may be overwritten to 0 if scheduling element destruction succeed. Ignore this value and always return initial one. Fixes: f47e04eb96e0 ("net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5: Lag, change multipath and bonding to be mutually exclusiveMaor Dickman
Both multipath and bonding events are changing the HW LAG state independently. Handling one of the features events while the other is already enabled can cause unwanted behavior, for example handling bonding event while multipath enabled will disable the lag and cause multipath to stop working. Fix it by ignoring bonding event while in multipath and ignoring FIB events while in bonding mode. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20ice: Add missing E810 device idsTony Nguyen
As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
2021-10-20igc: Update I226_K device IDSasha Neftin
The device ID for I226_K was incorrectly assigned, update the device ID to the correct one. Fixes: bfa5e98c9de4 ("igc: Add new device ID") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Fix packet loss on Tiger Lake and laterSasha Neftin
Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Separate TGP board type from SPTSasha Neftin
We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20net: stmmac: Fix E2E delay mechanismKurt Kanzenbach
When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: disable sriov before unload hclge layerPeng Li
HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: fix vf reset workqueue cannot exitYufeng Mo
The task of VF reset is performed through the workqueue. It checks the value of hdev->reset_pending to determine whether to exit the loop. However, the value of hdev->reset_pending may also be assigned by the interrupt function hclgevf_misc_irq_handle(), which may cause the loop fail to exit and keep occupying the workqueue. This loop is not necessary, so remove it and the workqueue will be rescheduled if the reset needs to be retried or a new reset occurs. Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: schedule the polling again when allocation failsYunsheng Lin
Currently when there is a rx page allocation failure, it is possible that polling may be stopped if there is no more packet to be reveiced, which may cause queue stall problem under memory pressure. This patch makes sure polling is scheduled again when there is any rx page allocation failure, and polling will try to allocate receive buffers until it succeeds. Now the allocation retry is added, it is unnecessary to do the rx page allocation at the end of rx cleaning, so remove it. And reset the unused_count to zero after calling hns3_nic_alloc_rx_buffers() to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under memory pressure. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: fix for miscalculation of rx unused descYunsheng Lin
rx unused desc is the desc that need attatching new buffer before refilling to hw to receive new packet, the number of desc need attatching new buffer is calculated using next_to_use and next_to_clean. when next_to_use == next_to_clean, currently hns3 driver assumes that all the desc has the buffer attatched, but 'next_to_use == next_to_clean' also means all the desc need attatching new buffer if hw has comsumed all the desc and the driver has not attatched any buffer to the desc yet. This patch adds 'refill' in desc_cb to indicate whether a new buffer has been refilled to a desc. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: fix the max tx size according to user manualYunsheng Lin
Currently the max tx size supported by the hw is calculated by using the max BD num supported by the hw. According to the hw user manual, the max tx size is fixed value for both non-TSO and TSO skb. This patch updates the max tx size according to the manual. Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-03-16 01:25:02 +0000