summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2023-05-03octeontx2-af: Fix start and end bit for scan configRatheesh Kannoth
In the current driver, NPC exact match feature was not getting enabled as configured bit was not read properly. for_each_set_bit_from() need end bit as one bit post position in the bit map to read NPC exact nibble enable bits properly. This patch fixes the same. Fixes: b747923afff8 ("octeontx2-af: Exact match support") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-03octeontx2-af: Secure APR table update with the lockGeetha sowjanya
APR table contains the lmtst base address of PF/VFs. These entries are updated by the PF/VF during the device probe. The lmtst address is fetched from HW using "TXN_REQ" and "ADDR_RSP_STS" registers. The lock tries to protect these registers from getting overwritten when multiple PFs invokes rvu_get_lmtaddr() simultaneously. For example, if PF1 submit the request and got permitted before it reads the response and PF2 got scheduled submit the request then the response of PF1 is overwritten by the PF2 response. Fixes: 893ae97214c3 ("octeontx2-af: cn10k: Support configurable LMTST regions") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-02net: ethernet: mtk_eth_soc: drop generic vlan rx offload, only use DSA untaggingFelix Fietkau
Through testing I found out that hardware vlan rx offload support seems to have some hardware issues. At least when using multiple MACs and when receiving tagged packets on the secondary MAC, the hardware can sometimes start to emit wrong tags on the first MAC as well. In order to avoid such issues, drop the feature configuration and use the offload feature only for DSA hardware untagging on MT7621/MT7622 devices where this feature works properly. Fixes: 08666cbb7dd5 ("net: ethernet: mtk_eth_soc: add support for configuring vlan rx offload") Tested-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230426172153.8352-1-linux@fw-web.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-01net: atlantic: Define aq_pm_ops conditionally on CONFIG_PMTom Rix
For s390, gcc with W=1 reports drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:458:32: error: 'aq_pm_ops' defined but not used [-Werror=unused-const-variable=] 458 | static const struct dev_pm_ops aq_pm_ops = { | ^~~~~~~~~ The only use of aq_pm_ops is conditional on CONFIG_PM. The definition of aq_pm_ops and its functions should also be conditional on CONFIG_PM. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01sfc: Fix module EEPROM reporting for QSFP modulesAndy Moreton
The sfc driver does not report QSFP module EEPROM contents correctly as only the first page is fetched from hardware. Commit 0e1a2a3e6e7d ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall size of the EEPROM info, so use that to report the full EEPROM contents. Fixes: 9b17010da57a ("sfc: Add ethtool -m support for QSFP modules") Signed-off-by: Andy Moreton <andy.moreton@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01r8152: move setting r8153b_rx_agg_chg_indicate()Hayes Wang
Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx. Otherwise, the coalescing settings are useless. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01r8152: fix the poor throughput for 2.5G devicesHayes Wang
Fix the poor throughput for 2.5G devices, when changing the speed from auto mode to force mode. This patch is used to notify the MAC when the mode is changed. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-01r8152: fix flow control issue of RTL8156AHayes Wang
The feature of flow control becomes abnormal, if the device sends a pause frame and the tx/rx is disabled before sending a release frame. It causes the lost of packets. Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow control patch and timer. Then, the hardware could clear the state and the flow control becomes normal after enabling tx/rx. Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto(). Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "Usual wide collection of unrelated items in drivers: - Driver bug fixes and treewide cleanups in hfi1, siw, qib, mlx5, rxe, usnic, usnic, bnxt_re, ocrdma, iser: - remove unnecessary NULL checks - kmap obsolescence - pci_enable_pcie_error_reporting() obsolescence - unused variables and macros - trace event related warnings - casting warnings - Code cleanups for irdm and erdma - EFA reporting of 128 byte PCIe TLP support - mlx5 more agressively uses the out of order HW feature - Big rework of how state machines and tasks work in rxe - Fix a syzkaller found crash netdev refcount leak in siw - bnxt_re revises their HW description header - Congestion control for bnxt_re - Use mmu_notifiers more safely in hfi1 - mlx5 gets better support for PCIe relaxed ordering inside VMs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (81 commits) RDMA/efa: Add rdma write capability to device caps RDMA/mlx5: Use correct device num_ports when modify DC RDMA/irdma: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call RDMA/rxe: Fix spinlock recursion deadlock on requester RDMA/mlx5: Fix flow counter query via DEVX RDMA/rxe: Protect QP state with qp->state_lock RDMA/rxe: Move code to check if drained to subroutine RDMA/rxe: Remove qp->req.state RDMA/rxe: Remove qp->comp.state RDMA/rxe: Remove qp->resp.state RDMA/mlx5: Allow relaxed ordering read in VFs and VMs net/mlx5: Update relaxed ordering read HCA capabilities RDMA/mlx5: Check pcie_relaxed_ordering_enabled() in UMR RDMA/mlx5: Remove pcie_relaxed_ordering_enabled() check for RO write RDMA: Add ib_virt_dma_to_page() RDMA/rxe: Fix the error "trying to register non-static key in rxe_cleanup_task" RDMA/irdma: Slightly optimize irdma_form_ah_cm_frame() RDMA/rxe: Fix incorrect TASKLET_STATE_SCHED check in rxe_task.c IB/hfi1: Place struct mmu_rb_handler on cache line start IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests ...
2023-04-28net: dsa: mv88e6xxx: add mv88e6321 rsvd2cpuAngelo Dureghello
Add rsvd2cpu capability for mv88e6321 model, to allow proper bpdu processing. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Fixes: 51c901a775621 ("net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPU") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-28atlantic:hw_atl2:hw_atl2_utils_fw: Remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-27Merge tag 'mm-stable-2023-04-27-15-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of switching from a user process to a kernel thread. - More folio conversions from Kefeng Wang, Zhang Peng and Pankaj Raghav. - zsmalloc performance improvements from Sergey Senozhatsky. - Yue Zhao has found and fixed some data race issues around the alteration of memcg userspace tunables. - VFS rationalizations from Christoph Hellwig: - removal of most of the callers of write_one_page() - make __filemap_get_folio()'s return value more useful - Luis Chamberlain has changed tmpfs so it no longer requires swap backing. Use `mount -o noswap'. - Qi Zheng has made the slab shrinkers operate locklessly, providing some scalability benefits. - Keith Busch has improved dmapool's performance, making part of its operations O(1) rather than O(n). - Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd, permitting userspace to wr-protect anon memory unpopulated ptes. - Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive rather than exclusive, and has fixed a bunch of errors which were caused by its unintuitive meaning. - Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature, which causes minor faults to install a write-protected pte. - Vlastimil Babka has done some maintenance work on vma_merge(): cleanups to the kernel code and improvements to our userspace test harness. - Cleanups to do_fault_around() by Lorenzo Stoakes. - Mike Rapoport has moved a lot of initialization code out of various mm/ files and into mm/mm_init.c. - Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for DRM, but DRM doesn't use it any more. - Lorenzo has also coverted read_kcore() and vread() to use iterators and has thereby removed the use of bounce buffers in some cases. - Lorenzo has also contributed further cleanups of vma_merge(). - Chaitanya Prakash provides some fixes to the mmap selftesting code. - Matthew Wilcox changes xfs and afs so they no longer take sleeping locks in ->map_page(), a step towards RCUification of pagefaults. - Suren Baghdasaryan has improved mmap_lock scalability by switching to per-VMA locking. - Frederic Weisbecker has reworked the percpu cache draining so that it no longer causes latency glitches on cpu isolated workloads. - Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig logic. - Liu Shixin has changed zswap's initialization so we no longer waste a chunk of memory if zswap is not being used. - Yosry Ahmed has improved the performance of memcg statistics flushing. - David Stevens has fixed several issues involving khugepaged, userfaultfd and shmem. - Christoph Hellwig has provided some cleanup work to zram's IO-related code paths. - David Hildenbrand has fixed up some issues in the selftest code's testing of our pte state changing. - Pankaj Raghav has made page_endio() unneeded and has removed it. - Peter Xu contributed some rationalizations of the userfaultfd selftests. - Yosry Ahmed has fixed an issue around memcg's page recalim accounting. - Chaitanya Prakash has fixed some arm-related issues in the selftests/mm code. - Longlong Xia has improved the way in which KSM handles hwpoisoned pages. - Peter Xu fixes a few issues with uffd-wp at fork() time. - Stefan Roesch has changed KSM so that it may now be used on a per-process and per-cgroup basis. * tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits) mm,unmap: avoid flushing TLB in batch if PTE is inaccessible shmem: restrict noswap option to initial user namespace mm/khugepaged: fix conflicting mods to collapse_file() sparse: remove unnecessary 0 values from rc mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area() hugetlb: pte_alloc_huge() to replace huge pte_alloc_map() maple_tree: fix allocation in mas_sparse_area() mm: do not increment pgfault stats when page fault handler retries zsmalloc: allow only one active pool compaction context selftests/mm: add new selftests for KSM mm: add new KSM process and sysfs knobs mm: add new api to enable ksm per process mm: shrinkers: fix debugfs file permissions mm: don't check VMA write permissions if the PTE/PMD indicates write permissions migrate_pages_batch: fix statistics for longterm pin retry userfaultfd: use helper function range_in_vma() lib/show_mem.c: use for_each_populated_zone() simplify code mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list() fs/buffer: convert create_page_buffers to folio_create_buffers fs/buffer: add folio_create_empty_buffers helper ...
2023-04-27Merge tag 'hyperv-next-signed-20230424' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - PCI passthrough for Hyper-V confidential VMs (Michael Kelley) - Hyper-V VTL mode support (Saurabh Sengar) - Move panic report initialization code earlier (Long Li) - Various improvements and bug fixes (Dexuan Cui and Michael Kelley) * tag 'hyperv-next-signed-20230424' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg Drivers: hv: move panic report code from vmbus to hv early init code x86/hyperv: VTL support for Hyper-V Drivers: hv: Kconfig: Add HYPERV_VTL_MODE x86/hyperv: Make hv_get_nmi_reason public x86/hyperv: Add VTL specific structs and hypercalls x86/init: Make get/set_rtc_noop() public x86/hyperv: Exclude lazy TLB mode CPUs from enlightened TLB flushes x86/hyperv: Add callback filter to cpumask_to_vpset() Drivers: hv: vmbus: Remove the per-CPU post_msg_page clocksource: hyper-v: make sure Invariant-TSC is used if it is available PCI: hv: Enable PCI pass-thru devices in Confidential VMs Drivers: hv: Don't remap addresses that are above shared_gpa_boundary hv_netvsc: Remove second mapping of send and recv buffers Drivers: hv: vmbus: Remove second way of mapping ring buffers Drivers: hv: vmbus: Remove second mapping of VMBus monitor pages swiotlb: Remove bounce buffer remapping for Hyper-V Driver: VMBus: Add Devicetree support dt-bindings: bus: Add Hyper-V VMBus Drivers: hv: vmbus: Convert acpi_device to more generic platform_device ...
2023-04-27Merge tag 'modules-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "The summary of the changes for this pull requests is: - Song Liu's new struct module_memory replacement - Nick Alcock's MODULE_LICENSE() removal for non-modules - My cleanups and enhancements to reduce the areas where we vmalloc module memory for duplicates, and the respective debug code which proves the remaining vmalloc pressure comes from userspace. Most of the changes have been in linux-next for quite some time except the minor fixes I made to check if a module was already loaded prior to allocating the final module memory with vmalloc and the respective debug code it introduces to help clarify the issue. Although the functional change is small it is rather safe as it can only *help* reduce vmalloc space for duplicates and is confirmed to fix a bootup issue with over 400 CPUs with KASAN enabled. I don't expect stable kernels to pick up that fix as the cleanups would have also had to have been picked up. Folks on larger CPU systems with modules will want to just upgrade if vmalloc space has been an issue on bootup. Given the size of this request, here's some more elaborate details: The functional change change in this pull request is the very first patch from Song Liu which replaces the 'struct module_layout' with a new 'struct module_memory'. The old data structure tried to put together all types of supported module memory types in one data structure, the new one abstracts the differences in memory types in a module to allow each one to provide their own set of details. This paves the way in the future so we can deal with them in a cleaner way. If you look at changes they also provide a nice cleanup of how we handle these different memory areas in a module. This change has been in linux-next since before the merge window opened for v6.3 so to provide more than a full kernel cycle of testing. It's a good thing as quite a bit of fixes have been found for it. Jason Baron then made dynamic debug a first class citizen module user by using module notifier callbacks to allocate / remove module specific dynamic debug information. Nick Alcock has done quite a bit of work cross-tree to remove module license tags from things which cannot possibly be module at my request so to: a) help him with his longer term tooling goals which require a deterministic evaluation if a piece a symbol code could ever be part of a module or not. But quite recently it is has been made clear that tooling is not the only one that would benefit. Disambiguating symbols also helps efforts such as live patching, kprobes and BPF, but for other reasons and R&D on this area is active with no clear solution in sight. b) help us inch closer to the now generally accepted long term goal of automating all the MODULE_LICENSE() tags from SPDX license tags In so far as a) is concerned, although module license tags are a no-op for non-modules, tools which would want create a mapping of possible modules can only rely on the module license tag after the commit 8b41fc4454e ("kbuild: create modules.builtin without Makefile.modbuiltin or tristate.conf"). Nick has been working on this *for years* and AFAICT I was the only one to suggest two alternatives to this approach for tooling. The complexity in one of my suggested approaches lies in that we'd need a possible-obj-m and a could-be-module which would check if the object being built is part of any kconfig build which could ever lead to it being part of a module, and if so define a new define -DPOSSIBLE_MODULE [0]. A more obvious yet theoretical approach I've suggested would be to have a tristate in kconfig imply the same new -DPOSSIBLE_MODULE as well but that means getting kconfig symbol names mapping to modules always, and I don't think that's the case today. I am not aware of Nick or anyone exploring either of these options. Quite recently Josh Poimboeuf has pointed out that live patching, kprobes and BPF would benefit from resolving some part of the disambiguation as well but for other reasons. The function granularity KASLR (fgkaslr) patches were mentioned but Joe Lawrence has clarified this effort has been dropped with no clear solution in sight [1]. In the meantime removing module license tags from code which could never be modules is welcomed for both objectives mentioned above. Some developers have also welcomed these changes as it has helped clarify when a module was never possible and they forgot to clean this up, and so you'll see quite a bit of Nick's patches in other pull requests for this merge window. I just picked up the stragglers after rc3. LWN has good coverage on the motivation behind this work [2] and the typical cross-tree issues he ran into along the way. The only concrete blocker issue he ran into was that we should not remove the MODULE_LICENSE() tags from files which have no SPDX tags yet, even if they can never be modules. Nick ended up giving up on his efforts due to having to do this vetting and backlash he ran into from folks who really did *not understand* the core of the issue nor were providing any alternative / guidance. I've gone through his changes and dropped the patches which dropped the module license tags where an SPDX license tag was missing, it only consisted of 11 drivers. To see if a pull request deals with a file which lacks SPDX tags you can just use: ./scripts/spdxcheck.py -f \ $(git diff --name-only commid-id | xargs echo) You'll see a core module file in this pull request for the above, but that's not related to his changes. WE just need to add the SPDX license tag for the kernel/module/kmod.c file in the future but it demonstrates the effectiveness of the script. Most of Nick's changes were spread out through different trees, and I just picked up the slack after rc3 for the last kernel was out. Those changes have been in linux-next for over two weeks. The cleanups, debug code I added and final fix I added for modules were motivated by David Hildenbrand's report of boot failing on a systems with over 400 CPUs when KASAN was enabled due to running out of virtual memory space. Although the functional change only consists of 3 lines in the patch "module: avoid allocation if module is already present and ready", proving that this was the best we can do on the modules side took quite a bit of effort and new debug code. The initial cleanups I did on the modules side of things has been in linux-next since around rc3 of the last kernel, the actual final fix for and debug code however have only been in linux-next for about a week or so but I think it is worth getting that code in for this merge window as it does help fix / prove / evaluate the issues reported with larger number of CPUs. Userspace is not yet fixed as it is taking a bit of time for folks to understand the crux of the issue and find a proper resolution. Worst come to worst, I have a kludge-of-concept [3] of how to make kernel_read*() calls for modules unique / converge them, but I'm currently inclined to just see if userspace can fix this instead" Link: https://lore.kernel.org/all/Y/kXDqW+7d71C4wz@bombadil.infradead.org/ [0] Link: https://lkml.kernel.org/r/025f2151-ce7c-5630-9b90-98742c97ac65@redhat.com [1] Link: https://lwn.net/Articles/927569/ [2] Link: https://lkml.kernel.org/r/20230414052840.1994456-3-mcgrof@kernel.org [3] * tag 'modules-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (121 commits) module: add debugging auto-load duplicate module support module: stats: fix invalid_mod_bytes typo module: remove use of uninitialized variable len module: fix building stats for 32-bit targets module: stats: include uapi/linux/module.h module: avoid allocation if module is already present and ready module: add debug stats to help identify memory pressure module: extract patient module check into helper modules/kmod: replace implementation with a semaphore Change DEFINE_SEMAPHORE() to take a number argument module: fix kmemleak annotations for non init ELF sections module: Ignore L0 and rename is_arm_mapping_symbol() module: Move is_arm_mapping_symbol() to module_symbol.h module: Sync code of is_arm_mapping_symbol() scripts/gdb: use mem instead of core_layout to get the module address interconnect: remove module-related code interconnect: remove MODULE_LICENSE in non-modules zswap: remove MODULE_LICENSE in non-modules zpool: remove MODULE_LICENSE in non-modules x86/mm/dump_pagetables: remove MODULE_LICENSE in non-modules ...
2023-04-27Merge tag 'driver-core-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...
2023-04-27Merge tag 'spi-v6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly standard release for SPI with the exception of a change to the API for specifying chip selects done in preparation for supporting devices with more than one chip select, this required some mechanical changes throughout the tree which have been cooking in -next happily for a while. There's also a new API to allow us to support TPM chips on half duplex controllers. Summary: - Refactoring in preparation for supporting multiple chip selects for a single device, needed by some flash devices, which required a change in the SPI device API visible throughout the tree - Support for hardware assisted interaction with SPI TPMs on half duplex controllers, implemented on nVidia Tedra210 QuadSPI - Optimisation for large transfers on fsl-cpm devices - Cleanups around device property use which fix some sisues with fwnode - Use of both void remove() and devm_platform_.*ioremap_resource() - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode, Intel MetorLake-S and StarFive J7110 QuadSPI" * tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits) spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: tegra210-quad: Enable TPM wait polling spi: Add TPM HW flow flag spi: bcm63xx: remove PM_SLEEP based conditional compilation spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: spi-cadence: Add support for Slave mode spi: spi-cadence: Switch to spi_controller structure spi: cadence-quadspi: fix suspend-resume implementations spi: dw: Add support for AMD Pensando Elba SoC spi: dw: Add AMD Pensando Elba SoC SPI Controller spi: cadence-quadspi: Disable the SPI before reconfiguring spi: cadence-quadspi: Update the read timeout based on the length spi: spi-loopback-test: Add module param for iteration length spi: add support for Amlogic A1 SPI Flash Controller dt-bindings: spi: add Amlogic A1 SPI controller spi: fsl-spi: No need to check transfer length versus word size spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void spi: fsl-cpm: Use 16 bit mode for large transfers with even size spi: fsl-spi: Re-organise transfer bits_per_word adaptation spi: fsl-spi: Fix CPM/QE mode Litte Endian ...
2023-04-27octeontx2-pf: mcs: Do not reset PN while updating secySubbaraya Sundeep
After creating SecYs, SCs and SAs a SecY can be modified to change attributes like validation mode, protect frames mode etc. During this SecY update, packet number is reset to initial user given value by mistake. Hence do not reset PN when updating SecY parameters. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Fix shared counters logicSubbaraya Sundeep
Macsec stats like InPktsLate and InPktsDelayed share same counter in hardware. If SecY replay_protect is true then counter represents InPktsLate otherwise InPktsDelayed. This mode change was tracked based on protect_frames instead of replay_protect mistakenly. Similarly InPktsUnchecked and InPktsOk share same counter and mode change was tracked based on validate_check instead of validate_disabled. This patch fixes those problems. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Clear stats before freeing resourceSubbaraya Sundeep
When freeing MCS hardware resources like SecY, SC and SA the corresponding stats needs to be cleared. Otherwise previous stats are shown in newly created macsec interfaces. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Match macsec ethertype along with DMACSubbaraya Sundeep
On CN10KB silicon a single hardware macsec block is present and offloads macsec operations for all the ethernet LMACs. TCAM match with macsec ethertype 0x88e5 alone at RX side is not sufficient to distinguish all the macsec interfaces created on top of netdevs. Hence append the DMAC of the macsec interface too. Otherwise the first created macsec interface only receives all the macsec traffic. Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-pf: mcs: Fix NULL pointer dereferencesSubbaraya Sundeep
When system is rebooted after creating macsec interface below NULL pointer dereference crashes occurred. This patch fixes those crashes by using correct order of teardown [ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 3324.415726] Mem abort info: [ 3324.418510] ESR = 0x96000006 [ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits [ 3324.426865] SET = 0, FnV = 0 [ 3324.429913] EA = 0, S1PTW = 0 [ 3324.433047] Data abort info: [ 3324.435921] ISV = 0, ISS = 0x00000006 [ 3324.439748] CM = 0, WnR = 0 .... [ 3324.575915] Call trace: [ 3324.578353] cn10k_mdo_del_secy+0x24/0x180 [ 3324.582440] macsec_common_dellink+0xec/0x120 [ 3324.586788] macsec_notify+0x17c/0x1c0 [ 3324.590529] raw_notifier_call_chain+0x50/0x70 [ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c [ 3324.599921] rollback_registered_many+0x354/0x5bc [ 3324.604616] unregister_netdevice_queue+0x88/0x10c [ 3324.609399] unregister_netdev+0x20/0x30 [ 3324.613313] otx2_remove+0x8c/0x310 [ 3324.616794] pci_device_shutdown+0x30/0x70 [ 3324.620882] device_shutdown+0x11c/0x204 [ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 966.673712] Mem abort info: [ 966.676497] ESR = 0x96000006 [ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits [ 966.684848] SET = 0, FnV = 0 [ 966.687895] EA = 0, S1PTW = 0 [ 966.691028] Data abort info: [ 966.693900] ISV = 0, ISS = 0x00000006 [ 966.697729] CM = 0, WnR = 0 [ 966.833467] Call trace: [ 966.835904] cn10k_mdo_stop+0x20/0xa0 [ 966.839557] macsec_dev_stop+0xe8/0x11c [ 966.843384] __dev_close_many+0xbc/0x140 [ 966.847298] dev_close_many+0x84/0x120 [ 966.851039] rollback_registered_many+0x114/0x5bc [ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0 [ 966.860952] unregister_netdevice_many+0x18/0x24 [ 966.865560] macsec_notify+0x1ac/0x1c0 [ 966.869303] raw_notifier_call_chain+0x50/0x70 [ 966.873738] call_netdevice_notifiers_info+0x34/0x7c [ 966.878694] rollback_registered_many+0x354/0x5bc [ 966.883390] unregister_netdevice_queue+0x88/0x10c [ 966.888173] unregister_netdev+0x20/0x30 [ 966.892090] otx2_remove+0x8c/0x310 [ 966.895571] pci_device_shutdown+0x30/0x70 [ 966.899660] device_shutdown+0x11c/0x204 [ 966.903574] __do_sys_reboot+0x208/0x290 [ 966.907487] __arm64_sys_reboot+0x20/0x30 [ 966.911489] el0_svc_handler+0x80/0x1c0 [ 966.915316] el0_svc+0x8/0x180 [ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060) [ 966.924448] ---[ end trace 341778e799c3d8d7 ]--- Fixes: c54ffc73601c ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-af: mcs: Fix MCS block interruptGeetha sowjanya
On CN10KB, MCS IP vector number, BBE and PAB interrupt mask got changed to support more block level interrupts. To address this changes, this patch fixes the bbe and pab interrupt handlers. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-af: mcs: Config parser to skip 8B headerGeetha sowjanya
When ptp timestamp is enabled in RPM, RPM will append 8B timestamp header for all RX traffic. MCS need to skip these 8 bytes header while parsing the packet header, so that correct tcam key is created for lookup. This patch fixes the mcs parser configuration to skip this 8B header for ptp packets. Fixes: ca7f49ff8846 ("octeontx2-af: cn10k: Introduce driver for macsec block.") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeontx2-af: mcs: Write TCAM_DATA and TCAM_MASK registers at onceSubbaraya Sundeep
As per hardware errata on CN10KB, all the four TCAM_DATA and TCAM_MASK registers has to be written at once otherwise write to individual registers will fail. Hence write to all TCAM_DATA registers and then to all TCAM_MASK registers. Fixes: cfc14181d497 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27octeonxt2-af: mcs: Fix per port bypass configGeetha sowjanya
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX registers. For CN10KB both register need to be configured for the port level mcs bypass to work. This patch also sets bitmap of flowid/secy entry reserved for default bypass so that these entries can be shown in debugfs. Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-27ixgbe: Fix panic during XDP_TX with > 64 CPUsJohn Hickey
Commit 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") adds support to allow XDP programs to run on systems with more than 64 CPUs by locking the XDP TX rings and indexing them using cpu % 64 (IXGBE_MAX_XDP_QS). Upon trying this out patch on a system with more than 64 cores, the kernel paniced with an array-index-out-of-bounds at the return in ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example splat: ========================================================================== UBSAN: array-index-out-of-bounds in /var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26 index 65 is out of range for type 'ixgbe_ring *[64]' ========================================================================== BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 65 PID: 408 Comm: ksoftirqd/65 Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020 RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe] Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9 00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7 47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0 RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282 RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000 RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000 RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001 R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000 R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ixgbe_poll+0x103e/0x1280 [ixgbe] ? sched_clock_cpu+0x12/0xe0 __napi_poll+0x30/0x160 net_rx_action+0x11c/0x270 __do_softirq+0xda/0x2ee run_ksoftirqd+0x2f/0x50 smpboot_thread_fn+0xb7/0x150 ? sort_range+0x30/0x30 kthread+0x127/0x150 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x1f/0x30 </TASK> I think this is how it happens: Upon loading the first XDP program on a system with more than 64 CPUs, ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However, immediately after this, the rings are reconfigured by ixgbe_setup_tc. ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop. ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if it is non-zero. Commenting out the decrement in ixgbe_free_q_vector stopped my system from panicing. I suspect to make the original patch work, I would need to load an XDP program and then replace it in order to get ixgbe_xdp_locking_key back above 0 since ixgbe_setup_tc is only called when transitioning between XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is incremented every time ixgbe_xdp_setup is called. Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems with more than 64 CPUs. Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied to the number of CPUs present, there is no reason to disable it upon unloading an XDP program. To avoid confusion, I have moved enabling ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path. Fixes: 4fe815850bdc ("ixgbe: let the xdpdrv work with more than 64 cpus") Signed-off-by: John Hickey <jjh@daedalian.us> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-26Merge tag 'net-next-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Introduce a config option to tweak MAX_SKB_FRAGS. Increasing the default value allows for better BIG TCP performances - Reduce compound page head access for zero-copy data transfers - RPS/RFS improvements, avoiding unneeded NET_RX_SOFTIRQ when possible - Threaded NAPI improvements, adding defer skb free support and unneeded softirq avoidance - Address dst_entry reference count scalability issues, via false sharing avoidance and optimize refcount tracking - Add lockless accesses annotation to sk_err[_soft] - Optimize again the skb struct layout - Extends the skb drop reasons to make it usable by multiple subsystems - Better const qualifier awareness for socket casts BPF: - Add skb and XDP typed dynptrs which allow BPF programs for more ergonomic and less brittle iteration through data and variable-sized accesses - Add a new BPF netfilter program type and minimal support to hook BPF programs to netfilter hooks such as prerouting or forward - Add more precise memory usage reporting for all BPF map types - Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params - Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton - Bigger batch of BPF verifier improvements to prepare for upcoming BPF open-coded iterators allowing for less restrictive looping capabilities - Rework RCU enforcement in the verifier, add kptr_rcu and enforce BPF programs to NULL-check before passing such pointers into kfunc - Add support for kptrs in percpu hashmaps, percpu LRU hashmaps and in local storage maps - Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps - Add support for refcounted local kptrs to the verifier for allowing shared ownership, useful for adding a node to both the BPF list and rbtree - Add BPF verifier support for ST instructions in convert_ctx_access() which will help new -mcpu=v4 clang flag to start emitting them - Add ARM32 USDT support to libbpf - Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations Protocols: - IPv4: Allow adding to IPv4 address a 'protocol' tag. Such value indicates the provenance of the IP address - IPv6: optimize route lookup, dropping unneeded R/W lock acquisition - Add the handshake upcall mechanism, allowing the user-space to implement generic TLS handshake on kernel's behalf - Bridge: support per-{Port, VLAN} neighbor suppression, increasing resilience to nodes failures - SCTP: add support for Fair Capacity and Weighted Fair Queueing schedulers - MPTCP: delay first subflow allocation up to its first usage. This will allow for later better LSM interaction - xfrm: Remove inner/outer modes from input/output path. These are not needed anymore - WiFi: - reduced neighbor report (RNR) handling for AP mode - HW timestamping support - support for randomized auth/deauth TA for PASN privacy - per-link debugfs for multi-link - TC offload support for mac80211 drivers - mac80211 mesh fast-xmit and fast-rx support - enable Wi-Fi 7 (EHT) mesh support Netfilter: - Add nf_tables 'brouting' support, to force a packet to be routed instead of being bridged - Update bridge netfilter and ovs conntrack helpers to handle IPv6 Jumbo packets properly, i.e. fetch the packet length from hop-by-hop extension header. This is needed for BIT TCP support - The iptables 32bit compat interface isn't compiled in by default anymore - Move ip(6)tables builtin icmp matches to the udptcp one. This has the advantage that icmp/icmpv6 match doesn't load the iptables/ip6tables modules anymore when iptables-nft is used - Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device Driver API: - Remove redundant Device Control Error Reporting Enable, as PCI core has already error reporting enabled at enumeration time - Move Multicast DB netlink handlers to core, allowing devices other then bridge to use them - Allow the page_pool to directly recycle the pages from safely localized NAPI - Implement lockless TX queue stop/wake combo macros, allowing for further code de-duplication and sanitization - Add YNL support for user headers and struct attrs - Add partial YNL specification for devlink - Add partial YNL specification for ethtool - Add tc-mqprio and tc-taprio support for preemptible traffic classes - Add tx push buf len param to ethtool, specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device - Add basic LED support for switch/phy - Add NAPI documentation, stop relaying on external links - Convert dsa_master_ioctl() to netdev notifier. This is a preparatory work to make the hardware timestamping layer selectable by user space - Add transceiver support and improve the error messages for CAN-FD controllers New hardware / drivers: - Ethernet: - AMD/Pensando core device support - MediaTek MT7981 SoC - MediaTek MT7988 SoC - Broadcom BCM53134 embedded switch - Texas Instruments CPSW9G ethernet switch - Qualcomm EMAC3 DWMAC ethernet - StarFive JH7110 SoC - NXP CBTX ethernet PHY - WiFi: - Apple M1 Pro/Max devices - RealTek rtl8710bu/rtl8188gu - RealTek rtl8822bs, rtl8822cs and rtl8821cs SDIO chipset - Bluetooth: - Realtek RTL8821CS, RTL8851B, RTL8852BS - Mediatek MT7663, MT7922 - NXP w8997 - Actions Semi ATS2851 - QTI WCN6855 - Marvell 88W8997 - Can: - STMicroelectronics bxcan stm32f429 Drivers: - Ethernet NICs: - Intel (1G, icg): - add tracking and reporting of QBV config errors - add support for configuring max SDU for each Tx queue - Intel (100G, ice): - refactor mailbox overflow detection to support Scalable IOV - GNSS interface optimization - Intel (i40e): - support XDP multi-buffer - nVidia/Mellanox: - add the support for linux bridge multicast offload - enable TC offload for egress and engress MACVLAN over bond - add support for VxLAN GBP encap/decap flows offload - extend packet offload to fully support libreswan - support tunnel mode in mlx5 IPsec packet offload - extend XDP multi-buffer support - support MACsec VLAN offload - add support for dynamic msix vectors allocation - drop RX page_cache and fully use page_pool - implement thermal zone to report NIC temperature - Netronome/Corigine: - add support for multi-zone conntrack offload - Solarflare/Xilinx: - support offloading TC VLAN push/pop actions to the MAE - support TC decap rules - support unicast PTP - Other NICs: - Broadcom (bnxt): enforce software based freq adjustments only on shared PHC NIC - RealTek (r8169): refactor to addess ASPM issues during NAPI poll - Micrel (lan8841): add support for PTP_PF_PEROUT - Cadence (macb): enable PTP unicast - Engleder (tsnep): add XDP socket zero-copy support - virtio-net: implement exact header length guest feature - veth: add page_pool support for page recycling - vxlan: add MDB data path support - gve: add XDP support for GQI-QPL format - geneve: accept every ethertype - macvlan: allow some packets to bypass broadcast queue - mana: add support for jumbo frame - Ethernet high-speed switches: - Microchip (sparx5): Add support for TC flower templates - Ethernet embedded switches: - Broadcom (b54): - configure 6318 and 63268 RGMII ports - Marvell (mv88e6xxx): - faster C45 bus scan - Microchip: - lan966x: - add support for IS1 VCAP - better TX/RX from/to CPU performances - ksz9477: add ETS Qdisc support - ksz8: enhance static MAC table operations and error handling - sama7g5: add PTP capability - NXP (ocelot): - add support for external ports - add support for preemptible traffic classes - Texas Instruments: - add CPSWxG SGMII support for J7200 and J721E - Intel WiFi (iwlwifi): - preparation for Wi-Fi 7 EHT and multi-link support - EHT (Wi-Fi 7) sniffer support - hardware timestamping support for some devices/firwmares - TX beacon protection on newer hardware - Qualcomm 802.11ax WiFi (ath11k): - MU-MIMO parameters support - ack signal support for management packets - RealTek WiFi (rtw88): - SDIO bus support - better support for some SDIO devices (e.g. MAC address from efuse) - RealTek WiFi (rtw89): - HW scan support for 8852b - better support for 6 GHz scanning - support for various newer firmware APIs - framework firmware backwards compatibility - MediaTek WiFi (mt76): - P2P support - mesh A-MSDU support - EHT (Wi-Fi 7) support - coredump support" * tag 'net-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2078 commits) net: phy: hide the PHYLIB_LEDS knob net: phy: marvell-88x2222: remove unnecessary (void*) conversions tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. net: amd: Fix link leak when verifying config failed net: phy: marvell: Fix inconsistent indenting in led_blink_set lan966x: Don't use xdp_frame when action is XDP_TX tsnep: Add XDP socket zero-copy TX support tsnep: Add XDP socket zero-copy RX support tsnep: Move skb receive action to separate function tsnep: Add functions for queue enable/disable tsnep: Rework TX/RX queue initialization tsnep: Replace modulo operation with mask net: phy: dp83867: Add led_brightness_set support net: phy: Fix reading LED reg property drivers: nfc: nfcsim: remove return value check of `dev_dir` net: phy: dp83867: Remove unnecessary (void*) conversions net: ethtool: coalesce: try to make user settings stick twice net: mana: Check if netdev/napi_alloc_frag returns single page net: mana: Rename mana_refill_rxoob and remove some empty lines net: veth: add page_pool stats ...
2023-04-26net: phy: hide the PHYLIB_LEDS knobPaolo Abeni
commit 4bb7aac70b5d ("net: phy: fix circular LEDS_CLASS dependencies") solved a build failure, but introduces a new config knob with a default 'y' value: PHYLIB_LEDS. The latter is against the current new config policy. The exception was raised to allow the user to catch bad configurations without led support. Anyway the current definition of PHYLIB_LEDS does not fit the above goal: if LEDS_CLASS is disabled, the new config will be available only with PHYLIB disabled, too. Hide the mentioned config, to preserve the randconfig testing done so far, while respecting the mentioned policy. Suggested-by: Andrew Lunn <andrew@lunn.ch> Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d82489be8ed911c383c3447e9abf469995ccf39a.1682496488.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-25Merge tag 'thermal-6.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly continue to prepare the thermal control subsystem for using unified representation of trip points, which includes cleanups, code refactoring and similar and update several drivers (for other reasons), which includes new hardware support. Specifics: - Add a thermal zone 'devdata' accessor and modify several drivers to use it (Daniel Lezcano) - Prevent drivers from using the 'device' internal thermal zone structure field directly (Daniel Lezcano) - Clean up the hwmon thermal driver (Daniel Lezcano) - Add thermal zone id accessor and thermal zone type accessor and prevent drivers from using thermal zone fields directly (Daniel Lezcano) - Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano) - Add lower bound check for sysfs input to the x86_pkg_temp_thermal Intel thermal driver (Zhang Rui) - Add more thermal zone device encapsulation: prevent setting structure field directly, access the sensor device instead the thermal zone's device for trace, relocate the traces in drivers/thermal (Daniel Lezcano) - Use the generic trip point for the i.MX and remove the get_trip_temp ops (Daniel Lezcano) - Use the devm_platform_ioremap_resource() in the Hisilicon driver (Yang Li) - Remove R-Car H3 ES1.* handling as public has only access to the ES2 version and the upstream support for the ES1 has been shutdown (Wolfram Sang) - Add a delay after initializing the bank in order to let the time to the hardware to initialze itself before reading the temperature (Amjad Ouled-Ameur) - Add MT8365 support (Amjad Ouled-Ameur) - Preparational cleanup and DT bindings for RK3588 support (Sebastian Reichel) - Add driver support for RK3588 (Finley Xiao) - Use devm_reset_control_array_get_exclusive() for the Rockchip driver (Ye Xingchen) - Detect power gated thermal zones and return -EAGAIN when reading the temperature (Mikko Perttunen) - Remove thermal_bind_params structure as it is unused (Zhang Rui) - Drop unneeded quotes in DT bindings allowing to run yamllint (Rob Herring) - Update the power allocator documentation according to the thermal trace relocation (Lukas Bulwahn) - Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor (Chen-Yu Tsai) - Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen) - Add AP domain support to LVTS thermal controllers for mt8195 (Balsam CHIHI) - Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano) - Make thermal_of_zone_[un]register() private to the thermal OF code (Daniel Lezcano) - Create a private copy of the thermal zone device parameters structure when registering a thermal zone (Daniel Lezcano) - Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui) - Revert recent message adjustment in thermal_hwmon (Rafael Wysocki) - Use of_property_present() for testing DT property presence in thermal control code (Rob Herring) - Clean up thermal_list_lock locking in the thermal core (Rafael Wysocki) - Add DLVR support for RFIM control in the int340x Intel thermal driver (Srinivas Pandruvada)" * tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) thermal: intel: int340x: Add DLVR support for RFIM control thermal/core: Alloc-copy-free the thermal zone parameters structure thermal/of: Unexport unused OF functions thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195 dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195 thermal: amlogic: Use dev_err_probe() thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement dt-bindings: thermal: Drop unneeded quotes thermal/core: Remove thermal_bind_params structure thermal/drivers/tegra-bpmp: Handle offline zones thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive() dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver thermal/drivers/rockchip: Support dynamic sized sensor array thermal/drivers/rockchip: Simplify channel id logic thermal/drivers/rockchip: Use dev_err_probe thermal/drivers/rockchip: Simplify clock logic thermal/drivers/rockchip: Simplify getting match data ...
2023-04-25Merge tag 'gpio-updates-for-v6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have some new drivers, significant refactoring of existing intel platforms, lots of improvements all around, mass conversion to using immutable irqchips by drivers that had not been converted individually yet and some changes in the core library code. Summary: New drivers: - add a driver for the Loongson GPIO controller - add a driver for the fxl6408 I2C GPIO expander - add a GPIO module containing code common for Intel Elkhart Lake and Merrifield platforms - add a driver for the Intel Elkhart Lake platform reusing the code from the intel tangier library GPIOLIB core: - GPIO ACPI improvements - simplify gpiochip_add_data_with_keys() fwnode handling - cleanup header inclusions (remove unneeded ones, order the rest alphabetically) - remove duplicate code (reuse krealloc() instead of open-coding it, drop a duplicated check in gpiod_find_and_request()) - reshuffle the code to remove unnecessary forward declarations - coding style cleanups and improvements - add a helper for accessing device fwnodes - small updates in docs Driver improvements: - convert all remaining GPIO irqchip drivers to using immutable irqchips - drop unnecessary of_match_ptr() macro expansions - shrink the code in gpio-merrifield significantly by reusing the code from gpio-tangier + minor tweaks to the driver code - remove MODULE_LICENSE() from drivers that can only be built-in - add device-tree support to gpio-loongson1 - use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24 - minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap, gpio-aspeed, gpio-raspberrypi-exp - shrink code in gpio-ich and gpio-pxa - Kconfig tweak for gpio-pmic-eic-sprd" * tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits) gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode gpiolib: Add gpiochip_set_data() helper gpiolib: Move gpiochip_get_data() higher in the code gpiolib: Check array_info for NULL only once in gpiod_get_array() gpiolib: Replace open coded krealloc() gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data() gpiolib: acpi: use the fwnode in acpi_gpiochip_find() gpio: mm-lantiq: Fix typo in the newly added header filename sh: mach-x3proto: Add missing #include <linux/gpio/driver.h> powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP gpio: xlp: Convert to immutable irq_chip gpio: xilinx: Convert to immutable irq_chip gpio: xgs-iproc: Convert to immutable irq_chip gpio: visconti: Convert to immutable irq_chip gpio: tqmx86: Convert to immutable irq_chip gpio: thunderx: Convert to immutable irq_chip gpio: stmpe: Convert to immutable irq_chip gpio: siox: Convert to immutable irq_chip gpio: rda: Convert to immutable irq_chip ...
2023-04-25Merge tag 'soc-drivers-6.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "The most notable updates this time are for Qualcomm Snapdragon platforms. The Inline-Crypto-Engine gets a new DT binding and driver, and a number of drivers now support additional Snapdragon variants, in particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc (edac) and rpm drivers get notable functionality updates. Updates on other platforms include: - Various updates to the Mediatek mutex and mmsys drivers, including support for the Helio X10 SoC - Support for unidirectional mailbox channels in Arm SCMI firmware - Support for per cpu asynchronous notification in OP-TEE firmware - Minor updates for memory controller drivers. - Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra, Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX SoC drivers, mainly updating the use of MODULE_LICENSE() macros and obsolete DT driver interfaces" * tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: ti: smartreflex: Simplify getting the opam_sr pointer bus: vexpress-config: Add explicit of_platform.h include soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS memory: mtk-smi: mt8365: Add SMI Support dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365 dt-bindings: memory-controllers: mediatek,smi-common: add mt8365 memory: tegra: read values from correct device dt-bindings: crypto: Add Qualcomm Inline Crypto Engine soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver dt-bindings: firmware: document Qualcomm QCM2290 SCM soc: qcom: rpmh-rsc: Support RSC v3 minor versions soc: qcom: smd-rpm: Use GFP_ATOMIC in write path soc/tegra: fuse: Remove nvmem root only access soc/tegra: cbb: tegra194: Use of_address_count() helper soc/tegra: cbb: Remove MODULE_LICENSE in non-modules ARM: tegra: Remove MODULE_LICENSE in non-modules soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource() soc: tegra: cbb: Drop empty platform remove function firmware: arm_scmi: Add support for unidirectional mailbox channels dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels ...
2023-04-25net: phy: marvell-88x2222: remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-25net: amd: Fix link leak when verifying config failedGencen Gan
After failing to verify configuration, it returns directly without releasing link, which may cause memory leak. Paolo Abeni thinks that the whole code of this driver is quite "suboptimal" and looks unmainatained since at least ~15y, so he suggests that we could simply remove the whole driver, please take it into consideration. Simon Horman suggests that the fix label should be set to "Linux-2.6.12-rc2" considering that the problem has existed since the driver was introduced and the commit above doesn't seem to exist in net/net-next. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Gan Gecen <gangecen@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-24net: phy: marvell: Fix inconsistent indenting in led_blink_setChristian Marangi
Fix inconsistent indeinting in m88e1318_led_blink_set reported by kernel test robot, probably done by the presence of an if condition dropped in later revision of the same code. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304240007.0VEX8QYG-lkp@intel.com/ Fixes: ea9e86485dec ("net: phy: marvell: Implement led_blink_set()") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230423172800.3470-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24lan966x: Don't use xdp_frame when action is XDP_TXHoratiu Vultur
When the action of an xdp program was XDP_TX, lan966x was creating a xdp_frame and use this one to send the frame back. But it is also possible to send back the frame without needing a xdp_frame, because it is possible to send it back using the page. And then once the frame is transmitted is possible to use directly page_pool_recycle_direct as lan966x is using page pools. This would save some CPU usage on this path, which results in higher number of transmitted frames. Bellow are the statistics: Frame size: Improvement: 64 ~8% 256 ~11% 512 ~8% 1000 ~0% 1500 ~0% Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230422142344.3630602-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add XDP socket zero-copy TX supportGerhard Engleder
Send and complete XSK pool frames within TX NAPI context. NAPI context is triggered by ndo_xsk_wakeup. Test results with A53 1.2GHz: xdpsock txonly copy mode, 64 byte frames: pps pkts 1.00 tx 284,409 11,398,144 Two CPUs with 100% and 10% utilization. xdpsock txonly zero-copy mode, 64 byte frames: pps pkts 1.00 tx 511,929 5,890,368 Two CPUs with 100% and 1% utilization. xdpsock l2fwd copy mode, 64 byte frames: pps pkts 1.00 rx 248,985 7,315,885 tx 248,921 7,315,885 Two CPUs with 100% and 10% utilization. xdpsock l2fwd zero-copy mode, 64 byte frames: pps pkts 1.00 rx 254,735 3,039,456 tx 254,735 3,039,456 Two CPUs with 100% and 4% utilization. Packet rate increases and CPU utilization is reduced in both cases. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add XDP socket zero-copy RX supportGerhard Engleder
Add support for XSK zero-copy to RX path. The setup of the XSK pool can be done at runtime. If the netdev is running, then the queue must be disabled and enabled during reconfiguration. This can be done easily with functions introduced in previous commits. A more important property is that, if the netdev is running, then the setup of the XSK pool shall not stop the netdev in case of errors. A broken netdev after a failed XSK pool setup is bad behavior. Therefore, the allocation and setup of resources during XSK pool setup is done only before any queue is disabled. Additionally, freeing and later allocation of resources is eliminated in some cases. Page pool entries are kept for later use. Two memory models are registered in parallel. As a result, the XSK pool setup cannot fail during queue reconfiguration. In contrast to other drivers, XSK pool setup and XDP BPF program setup are separate actions. XSK pool setup can be done without any XDP BPF program. The XDP BPF program can be added, removed or changed without any reconfiguration of the XSK pool. Test results with A53 1.2GHz: xdpsock rxdrop copy mode, 64 byte frames: pps pkts 1.00 rx 856,054 10,625,775 Two CPUs with both 100% utilization. xdpsock rxdrop zero-copy mode, 64 byte frames: pps pkts 1.00 rx 889,388 4,615,284 Two CPUs with 100% and 20% utilization. Packet rate increases and CPU utilization is reduced. 100% CPU load seems to the base load. This load is consumed by ksoftirqd just for dropping the generated packets without xdpsock running. Using batch API reduced CPU utilization slightly, but measurements are not stable enough to provide meaningful numbers. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Move skb receive action to separate functionGerhard Engleder
The function tsnep_rx_poll() is already pretty long and the skb receive action can be reused for XSK zero-copy support. Move page based skb receive to separate function. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Add functions for queue enable/disableGerhard Engleder
Move queue enable and disable code to separate functions. This way the activation and deactivation of the queues are defined actions, which can be used in future execution paths. This functions will be used for the queue reconfiguration at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Rework TX/RX queue initializationGerhard Engleder
Make initialization of TX and RX queues less dynamic by moving some initialization from netdev open/close to device probing. Additionally, move some initialization code to separate functions to enable future use in other execution paths. This is done as preparation for queue reconfigure at runtime, which is necessary for XSK zero-copy support. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24tsnep: Replace modulo operation with maskGerhard Engleder
TX/RX ring size is static and power of 2 to enable compiler to optimize modulo operation to mask operation. Make this optimization already in the code and don't rely on the compiler. CPU utilisation during high packet rate has not changed. So no performance improvement has been measured. But it is best practice to prevent modulo operations. Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: phy: dp83867: Add led_brightness_set supportAlexander Stein
Up to 4 LEDs can be attached to the PHY, add support for setting brightness manually. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230424134625.303957-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: phy: Fix reading LED reg propertyAlexander Stein
'reg' is always encoded in 32 bits, thus it has to be read using the function with the corresponding bit width. Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230424141648.317944-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: phy: dp83867: Remove unnecessary (void*) conversionswuych
Pointer variables of void * type do not require type cast. Signed-off-by: wuych <yunchuan@nfschina.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230424101550.664319-1-yunchuan@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: mana: Check if netdev/napi_alloc_frag returns single pageHaiyang Zhang
netdev/napi_alloc_frag() may fall back to single page which is smaller than the requested size. Add error checking to avoid memory overwritten. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: mana: Rename mana_refill_rxoob and remove some empty linesHaiyang Zhang
Rename mana_refill_rxoob for naming consistency. And remove some empty lines between function call and error checking. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: veth: add page_pool statsLorenzo Bianconi
Introduce page_pool stats support to report info about local page_pool through ethtool Tested-by: Maryam Tahhan <mtahhan@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24net: veth: add page_pool for page recyclingLorenzo Bianconi
Introduce page_pool support in veth driver in order to recycle pages in veth_convert_skb_to_xdp_buff routine and avoid reallocating the skb through the page allocator. The patch has been tested sending tcp traffic to a veth pair where the remote peer is running a simple xdp program just returning xdp_pass: veth upstream codebase: MTU 1500B: ~ 8Gbps MTU 8000B: ~ 13.9Gbps veth upstream codebase + pp support: MTU 1500B: ~ 9.2Gbps MTU 8000B: ~ 16.2Gbps Tested-by: Maryam Tahhan <mtahhan@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-24Merge tag 'rcu.6.4.april5.2023.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux Pull RCU updates from Joel Fernandes: - Updates and additions to MAINTAINERS files, with Boqun being added to the RCU entry and Zqiang being added as an RCU reviewer. I have also transitioned from reviewer to maintainer; however, Paul will be taking over sending RCU pull-requests for the next merge window. - Resolution of hotplug warning in nohz code, achieved by fixing cpu_is_hotpluggable() through interaction with the nohz subsystem. Tick dependency modifications by Zqiang, focusing on fixing usage of the TICK_DEP_BIT_RCU_EXP bitmask. - Avoid needless calls to the rcu-lazy shrinker for CONFIG_RCU_LAZY=n kernels, fixed by Zqiang. - Improvements to rcu-tasks stall reporting by Neeraj. - Initial renaming of k[v]free_rcu() to k[v]free_rcu_mightsleep() for increased robustness, affecting several components like mac802154, drbd, vmw_vmci, tracing, and more. A report by Eric Dumazet showed that the API could be unknowingly used in an atomic context, so we'd rather make sure they know what they're asking for by being explicit: https://lore.kernel.org/all/20221202052847.2623997-1-edumazet@google.com/ - Documentation updates, including corrections to spelling, clarifications in comments, and improvements to the srcu_size_state comments. - Better srcu_struct cache locality for readers, by adjusting the size of srcu_struct in support of SRCU usage by Christoph Hellwig. - Teach lockdep to detect deadlocks between srcu_read_lock() vs synchronize_srcu() contributed by Boqun. Previously lockdep could not detect such deadlocks, now it can. - Integration of rcutorture and rcu-related tools, targeted for v6.4 from Boqun's tree, featuring new SRCU deadlock scenarios, test_nmis module parameter, and more - Miscellaneous changes, various code cleanups and comment improvements * tag 'rcu.6.4.april5.2023.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jfern/linux: (71 commits) checkpatch: Error out if deprecated RCU API used mac802154: Rename kfree_rcu() to kvfree_rcu_mightsleep() rcuscale: Rename kfree_rcu() to kfree_rcu_mightsleep() ext4/super: Rename kfree_rcu() to kfree_rcu_mightsleep() net/mlx5: Rename kfree_rcu() to kfree_rcu_mightsleep() net/sysctl: Rename kvfree_rcu() to kvfree_rcu_mightsleep() lib/test_vmalloc.c: Rename kvfree_rcu() to kvfree_rcu_mightsleep() tracing: Rename kvfree_rcu() to kvfree_rcu_mightsleep() misc: vmw_vmci: Rename kvfree_rcu() to kvfree_rcu_mightsleep() drbd: Rename kvfree_rcu() to kvfree_rcu_mightsleep() rcu: Protect rcu_print_task_exp_stall() ->exp_tasks access rcu: Avoid stack overflow due to __rcu_irq_enter_check_tick() being kprobe-ed rcu-tasks: Report stalls during synchronize_srcu() in rcu_tasks_postscan() rcu: Permit start_poll_synchronize_rcu_expedited() to be invoked early rcu: Remove never-set needwake assignment from rcu_report_qs_rdp() rcu: Register rcu-lazy shrinker only for CONFIG_RCU_LAZY=y kernels rcu: Fix missing TICK_DEP_MASK_RCU_EXP dependency check rcu: Fix set/clear TICK_DEP_BIT_RCU_EXP bitmask race rcu/trace: use strscpy() to instead of strncpy() tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem ...
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-11 17:48:20 +0000