| Age | Commit message (Collapse) | Author |
|---|
|
The virtio-net big mode did not enable premapped mode,
so we did not need to check the unmap. And the subsequent
commit will remove the failover code for failing enable
premapped for merge and small mode. So we need to remove
the checking do_dma code in the big mode path.
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the frag just got a page, then may lead to regression on VM.
Specially if the sysctl net.core.high_order_alloc_disable value is 1,
then the frag always get a page when do refill.
Which could see reliable crashes or scp failure (scp a file 100M in size
to VM).
The issue is that the virtnet_rq_dma takes up 16 bytes at the beginning
of a new frag. When the frag size is larger than PAGE_SIZE,
everything is fine. However, if the frag is only one page and the
total size of the buffer and virtnet_rq_dma is larger than one page, an
overflow may occur.
The commit f9dac92ba908 ("virtio_ring: enable premapped mode whatever
use_dma_api") introduced this problem. And we reverted some commits to
fix this in last linux version. Now we try to enable it and fix this
bug directly.
Here, when the frag size is not enough, we reduce the buffer len to fix
this problem.
Reported-by: "Si-Wei Liu" <si-wei.liu@oracle.com>
Tested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Sparse provides the following output:
warning: cast to restricted __be32
This is a harmless warning due to the fact that we dereference the hash
stored in the FD using an incorrect type annotation. Suppress the
warning by using the correct __be32 type instead of u32. No functional
change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20241029164317.50182-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multi-buffer frame descriptors (FDs) point to a buffer holding a
scatter/gather table (SGT), which is a finite array of fixed-size
entries, the last of which has qm_sg_entry_is_final(&sgt[i]) == true.
Each SGT entry points to a buffer holding pieces of the frame.
DPAARM.pdf explains in the figure called "Internal and External Margins,
Scatter/Gather Frame Format" that the SGT table is located within its
buffer at the same offset as the frame data start is located within the
first packet buffer.
+------------------------+
Scatter/Gather Buffer | First Buffer | Last Buffer
^ +------------+ ^ +-|---->^ +------------+ +->+------------+
| | | | ICEOF | | | | | |////////////|
| +------------+ v | | | | | |////////////|
BSM | |/ part of //| | |BSM | | | |////////////|
| |/ Internal /| | | | | | |////////////|
| |/ Context //| | | | | | |// Frame ///|
| +------------+ | | | | | ... |/ content //|
| | | | | | | | |////////////|
| | | | | | | | |////////////|
v +------------+ | | v +------------+ |////////////|
| Scatter/ //| sgt[0]--+ | |// Frame ///| |////////////|
| Gather List| ... | |/ content //| +------------+ ^
|////////////| sgt[N]----+ |////////////| | | | BEM
|////////////| |////////////| | | |
+------------+ +------------+ +------------+ v
BSM = Buffer Start Margin, BEM = Buffer End Margin, both are configured
by dpaa_eth_init_rx_port() for the RX FMan port relevant here.
sg_fd_to_skb() runs in the calling context of rx_default_dqrr() -
the NAPI receive callback - which only expects to receive contiguous
(qm_fd_contig) or scatter/gather (qm_fd_sg) frame descriptors.
Everything else is irrelevant codewise.
The processing done by sg_fd_to_skb() is weird because it does not
conform to the expectations laid out by the aforementioned figure.
Namely, it parses the OFFSET field only for SGT entries with i != 0
(codewise, skb != NULL). In those cases, OFFSET should always be 0.
Also, it does not parse the OFFSET field for the sgt[0] case, the only
case where the buffer offset is meaningful in this context. There, it
uses the fd_off, aka the offset to the Scatter/Gather List in the
Scatter/Gather Buffer from the figure. By equivalence, they should both
be equal to the BSM (in turn, equal to priv->rx_headroom).
This can actually be explained due to the bug which we had in
qm_sg_entry_get_off() until the previous change:
- qm_sg_entry_get_off() did not actually _work_ for sgt[0]. It returned
zero even with a non-zero offset, so fd_off had to be used as a fill-in.
- qm_sg_entry_get_off() always returned zero for sgt[i>0], and that
resulted in no user-visible bug, because the buffer offset _was
supposed_ to be zero for those buffers. So remove it from calculations.
Add assertions about the OFFSET field in both cases (first or subsequent
SGT entries) to make it absolutely obvious when something is not well
handled.
Similar logic can be seen in the driver for the architecturally similar
DPAA2, where dpaa2_eth_build_frag_skb() calls dpaa2_sg_get_offset() only
for i == 0. For the rest, there is even a comment stating the same thing:
* Data in subsequent SG entries is stored from the
* beginning of the buffer, so we don't need to add the
* sg_offset.
Tested on LS1046A.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20241029164317.50182-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's no need for devm bloat here. In addition, these are freed right
before the function exits.
Also swapped kcalloc order for consistency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Link: https://patch.msgid.link/20241101214828.289752-2-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ena_com_get_dev_basic_stats() has been unused since 2017's
commit d81db2405613 ("net/ena: refactor ena_get_stats64 to be atomic
context safe")
ena_com_get_offload_settings() has been unused since the original
commit of ENA back in 2016 in
commit 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic
Network Adapters (ENA)")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20241102220142.80285-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This manually reverts
commit a4e262cde3cd ("net: ena: allow automatic fallback to polling mode")
which is unused.
(I did it manually because there are other minor comment
and function changes surrounding it).
Build tested only.
Suggested-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241103194149.293456-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit d80a3091308491455b6501b1c4b68698c4a7cd24, reversing
changes made to 637f41476384c76d3cd7dcf5947caf2c8b8d7a9b:
2cf246143519 ("net: hns3: fix kernel crash when 1588 is sent on HIP08 devices")
3e22b7de34cb ("net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue")
d1c2e2961ab4 ("net: hns3: initialize reset_timer before hclgevf_misc_irq_init()")
5f62009ff108 ("net: hns3: don't auto enable misc vector")
2758f18a83ef ("net: hns3: Resolved the issue that the debugfs query result is inconsistent.")
662ecfc46690 ("net: hns3: fix missing features due to dev->features configuration too early")
3e0f7cc887b7 ("net: hns3: fixed reset failure issues caused by the incorrect reset type")
f2c14899caba ("net: hns3: add sync command to sync io-pgtable")
e6ab19443b36 ("net: hns3: default enable tx bounce buffer when smmu enabled")
The series is making the driver poke into IOMMU internals instead of
implementing appropriate IOMMU workarounds.
Link: https://lore.kernel.org/069c9838-b781-4012-934a-d2626fa78212@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a partial revert to commit 76a0a3f9cc2f ("e1000e: fix force smbus
during suspend flow"). That commit fixed a sporadic PHY access issue but
introduced a regression in runtime suspend flows.
The original issue on Meteor Lake systems was rare in terms of the
reproduction rate and the number of the systems affected.
After the integration of commit 0a6ad4d9e169 ("e1000e: avoid failing the
system during pm_suspend"), PHY access loss can no longer cause a
system-level suspend failure. As it only occurs when the LAN cable is
disconnected, and is recovered during system resume flow. Therefore, its
functional impact is low, and the priority is given to stabilizing
runtime suspend.
Fixes: 76a0a3f9cc2f ("e1000e: fix force smbus during suspend flow")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix a race condition in the i40e driver that leads to MAC/VLAN filters
becoming corrupted and leaking. Address the issue that occurs under
heavy load when multiple threads are concurrently modifying MAC/VLAN
filters by setting mac and port VLAN.
1. Thread T0 allocates a filter in i40e_add_filter() within
i40e_ndo_set_vf_port_vlan().
2. Thread T1 concurrently frees the filter in __i40e_del_filter() within
i40e_ndo_set_vf_mac().
3. Subsequently, i40e_service_task() calls i40e_sync_vsi_filters(), which
refers to the already freed filter memory, causing corruption.
Reproduction steps:
1. Spawn multiple VFs.
2. Apply a concurrent heavy load by running parallel operations to change
MAC addresses on the VFs and change port VLANs on the host.
3. Observe errors in dmesg:
"Error I40E_AQ_RC_ENOSPC adding RX filters on VF XX,
please set promiscuous on manually for VF XX".
Exact code for stable reproduction Intel can't open-source now.
The fix involves implementing a new intermediate filter state,
I40E_FILTER_NEW_SYNC, for the time when a filter is on a tmp_add_list.
These filters cannot be deleted from the hash list directly but
must be removed using the full process.
Fixes: 278e7d0b9d68 ("i40e: store MAC/VLAN filters in a hash with the MAC Address as key")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In an event where the platform running the device control plane
is rebooted, reset is detected on the driver. It releases
all the resources and waits for the reset to complete. Once the
reset is done, it tries to build the resources back. At this
time if the device control plane is not yet started, then
the driver timeouts on the virtchnl message and retries to
establish the mailbox again.
In the retry flow, mailbox is deinitialized but the mailbox
workqueue is still alive and polling for the mailbox message.
This results in accessing the released control queue leading to
null-ptr-deref. Fix it by unrolling the work queue cancellation
and mailbox deinitialization in the reverse order which they got
initialized.
Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request")
Fixes: 34c21fa894a1 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org # 6.9+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the device control plane is removed or the platform
running device control plane is rebooted, a reset is detected
on the driver. On driver reset, it releases the resources and
waits for the reset to complete. If the reset fails, it takes
the error path and releases the vport lock. At this time if the
monitoring tools tries to access link settings, it call traces
for accessing released vport pointer.
To avoid it, move link_speed_mbps to netdev_priv structure
which removes the dependency on vport pointer and the vport lock
in idpf_get_link_ksettings. Also use netif_carrier_ok()
to check the link status and adjust the offsetof to use link_up
instead of link_speed_mbps.
Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks")
Cc: stable@vger.kernel.org # 6.7+
Reviewed-by: Tarun K Singh <tarun.k.singh@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix Flow Director not allowing to re-map traffic to 0th queue when action
is configured to drop (and vice versa).
The current implementation of ethtool callback in the ice driver forbids
change Flow Director action from 0 to -1 and from -1 to 0 with an error,
e.g:
# ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action 0
# ethtool -U eth2 flow-type tcp4 src-ip 1.1.1.1 loc 1 action -1
rmgr: Cannot insert RX class rule: Invalid argument
We set the value of `u16 q_index = 0` at the beginning of the function
ice_set_fdir_input_set(). In case of "drop traffic" action (which is
equal to -1 in ethtool) we store the 0 value. Later, when want to change
traffic rule to redirect to queue with index 0 it returns an error
caused by duplicate found.
Fix this behaviour by change of the type of field `q_index` from u16 to s16
in `struct ice_fdir_fltr`. This allows to store -1 in the field in case
of "drop traffic" action. What is more, change the variable type in the
function ice_set_fdir_input_set() and assign at the beginning the new
`#define ICE_FDIR_NO_QUEUE_IDX` which is -1. Later, if the action is set
to another value (point specific queue index) the variable value is
overwritten in the function.
Fixes: cac2a27cd9ab ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Unloading the ice driver while switchdev port representors are added to
a bridge can lead to kernel panic. Reproducer:
modprobe ice
devlink dev eswitch set $PF1_PCI mode switchdev
ip link add $BR type bridge
ip link set $BR up
echo 2 > /sys/class/net/$PF1/device/sriov_numvfs
sleep 2
ip link set $PF1 master $BR
ip link set $VF1_PR master $BR
ip link set $VF2_PR master $BR
ip link set $PF1 up
ip link set $VF1_PR up
ip link set $VF2_PR up
ip link set $VF1 up
rmmod irdma ice
When unloading the driver, ice_eswitch_detach() is eventually called as
part of VF freeing. First, it removes a port representor from xarray,
then unregister_netdev() is called (via repr->ops.rem()), finally
representor is deallocated. The problem comes from the bridge doing its
own deinit at the same time. unregister_netdev() triggers a notifier
chain, resulting in ice_eswitch_br_port_deinit() being called. It should
set repr->br_port = NULL, but this does not happen since repr has
already been removed from xarray and is not found. Regardless, it
finishes up deallocating br_port. At this point, repr is still not freed
and an fdb event can happen, in which ice_eswitch_br_fdb_event_work()
takes repr->br_port and tries to use it, which causes a panic (use after
free).
Note that this only happens with 2 or more port representors added to
the bridge, since with only one representor port, the bridge deinit is
slightly different (ice_eswitch_br_port_deinit() is called via
ice_eswitch_br_ports_flush(), not ice_eswitch_br_port_unlink()).
Trace:
Oops: general protection fault, probably for non-canonical address 0xf129010fd1a93284: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0x8948287e8d499420-0x8948287e8d499427]
(...)
Workqueue: ice_bridge_wq ice_eswitch_br_fdb_event_work [ice]
RIP: 0010:__rht_bucket_nested+0xb4/0x180
(...)
Call Trace:
(...)
ice_eswitch_br_fdb_find+0x3fa/0x550 [ice]
? __pfx_ice_eswitch_br_fdb_find+0x10/0x10 [ice]
ice_eswitch_br_fdb_event_work+0x2de/0x1e60 [ice]
? __schedule+0xf60/0x5210
? mutex_lock+0x91/0xe0
? __pfx_ice_eswitch_br_fdb_event_work+0x10/0x10 [ice]
? ice_eswitch_br_update_work+0x1f4/0x310 [ice]
(...)
A workaround is available: brctl setageing $BR 0, which stops the bridge
from adding fdb entries altogether.
Change the order of operations in ice_eswitch_detach(): move the call to
unregister_netdev() before removing repr from xarray. This way
repr->br_port will be correctly set to NULL in
ice_eswitch_br_port_deinit(), preventing a panic.
Fixes: fff292b47ac1 ("ice: add VF representors one by one")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Commit b8e0ddd36ce9 ("can: mcp251xfd: tef: prepare to workaround
broken TEF FIFO tail index erratum") introduced
mcp251xfd_get_tef_len() to get the number of unhandled transmit events
from the Transmit Event FIFO (TEF).
As the TEF has no head pointer, the driver uses the TX FIFO's tail
pointer instead, assuming that send frames are completed. However the
check for the TEF being full was not correct. This leads to the driver
stop working if the TEF is full.
Fix the TEF full check by assuming that if, from the driver's point of
view, there are no free TX buffers in the chip and the TX FIFO is
empty, all messages must have been sent and the TEF must therefore be
full.
Reported-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Closes: https://patch.msgid.link/FR3P281MB155216711EFF900AD9791B7ED9692@FR3P281MB1552.DEUP281.PROD.OUTLOOK.COM
Fixes: b8e0ddd36ce9 ("can: mcp251xfd: tef: prepare to workaround broken TEF FIFO tail index erratum")
Tested-by: Sven Schuchmann <schuchmann@schleissheimer.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20241104-mcp251xfd-fix-length-calculation-v3-1-608b6e7e2197@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
switching CAN modes
Since commit 50ea5449c563 ("can: mcp251xfd: fix ring configuration
when switching from CAN-CC to CAN-FD mode"), the current ring and
coalescing configuration is passed to can_ram_get_layout(). That fixed
the issue when switching between CAN-CC and CAN-FD mode with
configured ring (rx, tx) and/or coalescing parameters (rx-frames-irq,
tx-frames-irq).
However 50ea5449c563 ("can: mcp251xfd: fix ring configuration when
switching from CAN-CC to CAN-FD mode"), introduced a regression when
switching CAN modes with disabled coalescing configuration: Even if
the previous CAN mode has no coalescing configured, the new mode is
configured with active coalescing. This leads to delayed receiving of
CAN-FD frames.
This comes from the fact, that ethtool uses usecs = 0 and max_frames =
1 to disable coalescing, however the driver uses internally
priv->{rx,tx}_obj_num_coalesce_irq = 0 to indicate disabled
coalescing.
Fix the regression by assigning struct ethtool_coalesce
ec->{rx,tx}_max_coalesced_frames_irq = 1 if coalescing is disabled in
the driver as can_ram_get_layout() expects this.
Reported-by: https://github.com/vdh-robothania
Closes: https://github.com/raspberrypi/linux/issues/6407
Fixes: 50ea5449c563 ("can: mcp251xfd: fix ring configuration when switching from CAN-CC to CAN-FD mode")
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241025-mcp251xfd-fix-coalesing-v1-1-9d11416de1df@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), OF
can be enabled on all architectures. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20241022130439.70d016e9@endymion.delvare
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The Rockchip CAN-FD controller is only present on Rockchip SoCs. Hence
add a dependency on ARCH_ROCKCHIP, to prevent asking the user about
this driver when configuring a kernel without Rockchip platform
support.
Fixes: ff60bfbaf67f219c ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/a4b3c8c1cca9515e67adac83af5ba1b1fab2fcbc.1727169288.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The c_can_handle_bus_err() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission. The patch fixes the issue by incrementing the
appropriate counter based on the type of error.
Fixes: 881ff67ad450 ("can: c_can: Added support for Bosch C_CAN controller")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241014135319.2009782-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In commit b382380c0d2d ("can: m_can: Add hrtimer to generate software
interrupt") support for IRQ-less devices was added. Instead of an
interrupt, the interrupt routine is called by a hrtimer-based polling
loop.
That patch forgot to change free_irq() to be only called for devices
with IRQs. Fix this, by calling free_irq() conditionally only if an
IRQ is available for the device (and thus has been requested
previously).
Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20240930-m_can-cleanups-v1-1-001c579cdee4@pengutronix.de
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The ISA variable is only defined if X86_32 is also defined. However,
these drivers are still useful and in use on at least some modern 64-bit
x86 industrial systems as well. With the correct module parameters, they
work as long as IO port communication is possible, despite their name
having ISA in them.
Fixes: a29689e60ed3 ("net: handle HAS_IOPORT dependencies")
Signed-off-by: Thomas Mühlbacher <tmuehlbacher@posteo.net>
Link: https://patch.msgid.link/20240919174151.15473-2-tmuehlbacher@posteo.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix a race condition when creating a lag bond in active backup
mode where after the bond creation the backup slave was
attached to the IB device, instead of the active slave.
This caused stale entries in the GID table, as the gid updating
mechanism relies on ib_device_get_netdev(), which would return
the backup slave.
Send an MLX5_DRIVER_EVENT_ACTIVE_BACKUP_LAG_CHANGE_LOWERSTATE
event when activating the lag, additionally to when modifying
the lag. This ensures that eventually the active netdevice is
stored in the bond IB device.
When handling this event remove the GIDs of the previously
attached netdevice in this port and rescan the GIDs of the
newly attached netdevice.
This ensures that eventually the active slave netdevice is
correctly stored in the IB device port. While there might be
a brief moment where the backup slave GIDs appear in the GID
table, it will eventually stabilize with the correct GIDs
(of the bond and the active slave).
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/91fc2cb24f63add266a528c1c702668a80416d9f.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Move dev_put() call to occur directly after the blocking
notifier, instead of within the event handler.
Fixes: 8d159eb2117b ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Link: https://patch.msgid.link/342ff94b3dcbb07da1c7dab862a73933d604b717.1730381292.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The i.MX95 ENETC has been upgraded to revision 4.1, which is different
from the LS1028A ENETC (revision 1.0) except for the SI part. Therefore,
the fsl-enetc driver is incompatible with i.MX95 ENETC PF. So add new
nxp-enetc4 driver to support i.MX95 ENETC PF, and this driver will be
used to support the ENETC PF with major revision 4 for other SoCs in the
future.
Currently, the nxp-enetc4 driver only supports basic transmission feature
for i.MX95 ENETC PF, the more basic and advanced features will be added
in the subsequent patches. In addition, PCS support has not been added
yet, so 10G ENETC (ENETC instance 2) is not supported now.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a situation where num_tx_rings cannot be divided by bdr_int_num.
For example, num_tx_rings is 8 and bdr_int_num is 3. According to the
previous logic, this results in two tx_bdr corresponding memories not
being allocated, so when sending packets to tx ring 6 or 7, wild pointers
will be accessed. Of course, this issue doesn't exist on LS1028A, because
its num_tx_rings is 8, and bdr_int_num is either 1 or 2. However, there
is a risk for the upcoming i.MX95. Therefore, it is necessary to ensure
that each tx_bdr can be allocated to the corresponding memory.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract enetc_int_vector_init() and enetc_int_vector_destroy() from
enetc_alloc_msix() so that the code is more concise and readable.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ERR050089 workaround causes performance degradation and potential
functional issues (e.g., RCU stalls) under certain workloads. Since
new SoCs like i.MX95 do not require this workaround, use a static key
to compile out enetc_lock_mdio() and enetc_unlock_mdio() at runtime,
improving performance and avoiding unnecessary logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Compile enetc_pf_common.c as a standalone module to allow shared usage
between ENETC v1 and v4 PF drivers. Add struct enetc_pf_ops to register
different hardware operation interfaces for both ENETC v1 and v4 PF
drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ENETC PF driver of LS1028A (rev 1.0) is incompatible with the version
used on the i.MX95 platform (rev 4.1), except for the station interface
(SI) part. To reduce code redundancy and prepare for a new driver for rev
4.1 and later, extract shared interfaces from enetc_pf.c and move them to
enetc_pf_common.c. This refactoring lays the groundwork for compiling
enetc_pf_common.c into a shared driver for both platforms' PF drivers.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The netc-blk-ctrl driver is used to configure Integrated Endpoint
Register Block (IERB) and Privileged Register Block (PRB) of NETC.
For i.MX platforms, it is also used to configure the NETCMIX block.
The IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
Note the IERB configuration registers can only be written after being
unlocked by PRB, otherwise, all write operations are inhibited. A warm
reset is performed when the IERB is unlocked, and it results in an FLR
to all NETC devices. Therefore, all NETC device drivers must be probed
or initialized after the warm reset is finished.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XDP and XDP socket require extra SQ/RQ/CQs. Most of these resources
are dynamically created: no XDP program loaded, no resources are
created. One exception is the SQ/CQ created for XDP_REDRIECT, used
for other netdev to forward packet to mlx5 for transmit. The patch
disables creation of SQ and CQ used for egress XDP_REDIRECT, by
checking whether ndo_xdp_xmit is set or not.
For netdev without XDP support such as non-uplink representor, this
saves around 0.35MB of memory, per representor netdevice per channel.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241031125856.530927-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dynamically allocating xdpsq, used by egress side XDP_REDIRECT.
mlx5 has multiple XDP sqs. Under struct mlx5e_channel:
1. rx_xdpsq: used for XDP_TX, an XDP prog handles the rx packet and
transmits using the same queue as rx.
2. xdpsq: used by egress side XDP_REDIRECT. This is for another interface
to redirect packet to the mlx5 interface, using ndo_xdp_xmit .
3. xsksq: used by XSK. XSK has its own dedicated channel, and it also
has resources of 1 and 2.
The patch changes only the 2. xdpsq.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241031125856.530927-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Removed the 'mlx5hws_' file name prefix from the internal HWS files.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241031125856.530927-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After adding HWS support in a separate folder, moving all the SWS
code into its own folder as well.
Now SWS and HWS implementation are located in their appropriate
folders:
- steering/sws/
- steering/hws/
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241031125856.530927-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The first approach was flawed, because there are situations where the
esw mode change fails, leaving the qos domain as NULL. Various calls
into the QoS infra then trigger a NULL pointer access and unhappiness.
Improve that by a combination of:
- Allocating the QoS domain on esw init and cleaning it up on teardown.
- Refactoring mode change to only call qos domain init but not cleanup.
- Making qos domain init idempotent - not change anything if nothing
needs changing.
Together, these should guarantee that, as long as the memory allocations
succeed, there should always be a valid qos domain until the esw
cleanup, no matter what mode changes happen (or failures thereof).
Fixes: 107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241031125856.530927-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The FPE on XGMAC is ready, it is time to update dwxgmac_tc_ops to
let user configure FPE via tc-mqprio/tc-taprio.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/0575ef1553d572b7c8bc1baafa3fb7ac641073e0.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the necessary fpe_map_preemption_class callback for xgmac.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/d0347f2b8a71fee372e53293fe26a6538775ec5d.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Synopsys XGMAC Databook defines MAC_RxQ_Ctrl1 register:
RQ: Frame Preemption Residue Queue
XGMAC_FPRQ is more readable and more consistent with GMAC4.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/611991edf9e9d6fac8b29c3fe952791b193ca179.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_get_num_tc() is the right method, we should not access
net_device.num_tc directly.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/6298463f4655a76faf94e4273a4205c13ca17c77.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable
Refactor FPE functions to avoid code duplication and
to simplify the code flow by avoiding the use of
function pointers.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/49de4607bae69ffe751b13329a3c07a990b82419.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A single "priv->dma_cap.fpesel" checks HW capability only,
while both HW capability and driver capability shall be
checked by later refactoring to prevent unexpected behavior
for FPE on unsupported MAC cores and keep FPE as an optional
implementation for current and new MAC cores.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/01e9cd13aedd38cb0e9a5d9875c475ce35250188.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename and add macro definitions to better reuse them in common code.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/510b85288b13aa2cce5adf849291009c6f29a84a.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By moving FPE related code info separate files, FPE implementation
becomes a separate module initially.
No functional change intended.
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/e9ddf4fbf0fc053ae30592aa6c4363e72a4d8e62.1730449003.git.0x1207@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Align the EEE config for RTL8126A with vendor driver r8126 to avoid
compatibility issues.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/71e4859e-4cd0-4b6b-b7fa-621d7721992f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This aligns some parameters with vendor driver r8125/r8126 to avoid
compatibility issues. Note that for RTL8125B there's no functional
change, just the open-coded version of the function is replaced.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/a8a9d896-fbe6-41f2-bf87-666567d3cdb3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Align the EEE config for RTL8125A/RTL8125B with vendor driver r8125.
This should help to avoid compatibility issues.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/044c925e-8669-4b98-87df-95b4056f4f5f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Moves the handling right before they are used and allows merging a
branch.
Also get rid of the error handling as devm_request_irq can handle that.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241030203727.6039-13-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Avoids manual frees. Also replaced irq_of_parse_and_map with
platform_get_irq since it's simpler and does the same thing.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241030203727.6039-12-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplifies the probe function by removing gotos.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241030203727.6039-11-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
