| Age | Commit message (Collapse) | Author |
|---|
|
Non-coherent architectures, like ARM, may require invalidating caches
before the device can use the DMA mapped memory, which means that before
posting pages to device, drivers should sync the memory for device.
Sync for device can be configured as page pool responsibility. Set the
relevant flag and define max_len for sync.
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/92e01f05c4f506a4f0a9b39c10175dcc01994910.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When Rx packet is received, drivers should sync the pages for CPU, to
ensure the CPU reads the data written by the device and not stale
data from its cache.
Add the missing sync call in Rx path, sync the actual length of data for
each fragment.
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/461486fac91755ca4e04c2068c102250026dcd0b.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Tx header should be pushed for each packet which is transmitted via
Spectrum ASICs. The cited commit moved the call to skb_cow_head() from
mlxsw_sp_port_xmit() to functions which handle Tx header.
In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx
header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is
no call for skb_cow_head() before pushing Tx header size to SKB. This flow
is relevant for Spectrum-1 and Spectrum-4, for PTP packets.
Add the missing call to skb_cow_head() to make sure that there is both
enough room to push the Tx header and that the SKB header is not cloned and
can be modified.
An additional set will be sent to net-next to centralize the handling of
the Tx header by pushing it to every packet just before transmission.
Cc: Richard Cochran <richardcochran@gmail.com>
Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/5145780b07ebbb5d3b3570f311254a3a2d554a44.1729866134.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lan969x supports a number of different features, depending on the
target. Add new field sparx5->features and initialize the features based
on the target. Also add the function sparx5_has_feature() and use it
throughout. For now, we only need to handle features: PSFP and PTP -
more will come in the future.
[1] https://www.microchip.com/en-us/product/lan9698
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-15-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add lan9691-switch compatible string to mchp_sparx5_match. Guard it with
IS_ENABLED(CONFIG_LAN969X_SWITCH) to make sure Sparx5 can be compiled on
its own.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-14-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the is_sparx5() macro (introduced in earlier series [1]), in places
where we need to handle things a bit differently on lan969x.
These places are:
- in sparx5_dsm_calendar_update() we need to switch the calendar
from a to b on lan969x.
- in sparx5_start() we need to make sure the HSCH_SYS_CLK_PER
register is only touched on Sparx5.
- in sparx5_start() we need to disable VCAP and FDMA for lan969x
(will come in later series).
- in sparx5_mirror_port_get() we must make sure the
ANA_AC_PROBE_PORT_CFG1 register is only read on Sparx5.
- sparx5_netdev.c and sparx5_packet.c we need to use different IFH
(Internal Frame Header) offsets for lan969x.
- in sparx5_port_fifo_sz() we must bail out on lan969x.
- in sparx5_port_config_low_set() we must configure the phase
detection registers.
- in sparx5_port_config() and sparx5_port_init() we must do some
additional configuration of the port devices.
- in sparx5_dwrr_conf_set() we must derive the scheduling layer
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-8-d3290f581663@microchip.com/
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-12-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lan969x has support for RedBox / HSR / PRP (not implemented yet). In
order to accommodate for this in the future, we need to give lan969x it's
own function for calculating the DSM calendar.
The function calculates the calendar for each taxi bus. The calendar is
used for bandwidth allocation towards the ports attached to the taxi
bus. A calendar configuration consists of up-to 64 slots, which may be
allocated to ports or left unused. Each slot accounts for 1 clock cycle.
Also expose sparx5_cal_speed_to_value(), sparx5_get_port_cal_speed,
sparx5_cal_bw and SPX5_DSM_CAL_EMPTY for use by lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-11-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PTP IRQ handler for lan969x. This is required, as the PTP registers
are placed in two different targets on Sparx5 and lan969x. The
implementation is otherwise the same as on Sparx5.
Also, expose sparx5_get_hwtimestamp() for use by lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-10-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a bunch of small lan969x ops in bulk. These ops are explained in
detail in a previous series [1].
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-8-d3290f581663@microchip.com/
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-9-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the lan969x constants to match data. These are already used
throughout the Sparx5 code (introduced in earlier series [1]), so no
need to update any code use.
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-0-d3290f581663@microchip.com/
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-8-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new file lan969x_regs.c that defines all the register differences
for lan969x, and add it to the lan969x match data.
GW_DEV2G5_PHASE_DETECTOR_CTRL, FP_DEV2G5_PHAD_CTRL_PHAD_ENA and
FP_DEV2G5_PHAD_CTRL_PHAD_FAILED are required by the new register macros
which was introduced earlier. Add these for Sparx5 also.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-7-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add match data for lan969x, with initial fields for iomap, iomap_size
and ioranges. Add new Kconfig symbol CONFIG_LAN969X_CONFIG for compiling
the lan969x driver.
It has been decided to give lan969x its own Kconfig symbol, as a
considerable amount of code is needed, beside the Sparx5 code, to add
full chip support (and more will be added in future series). Also this
makes it possible to compile Sparx5 without lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-6-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Lan969x will require a few additional registers for certain operations.
Some are shared, some are not. Add these.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-5-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for lan969x, add the sparx5 context pointer to certain
IFH (Internal Frame Header) functions. This is required, as the
is_sparx5() function will be used here in a subsequent patch.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-4-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for lan969x, rework the function that calculates the SDLB
(Service Dual Leacky Bucket) clock. This is required, as the
HSCH_SYS_CLK_PER register is Sparx5-exclusive. Instead derive the clock
from the core clock, using the sparx5_clk_period() function. The clock
stays the same before and after this patch, only now,
sparx5_sdlb_clk_hz_get() can be used for lan969x too.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-3-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for lan969x, use spx5_rmw() for enabling the update of
the calendar. This is required to not overwrite the DSM_TAXI_CAL_CFG
register, as an additional write will be added before this one, in a
subsequent patch.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-2-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for lan969x, add lan969x targets to
sparx5_target_chiptype and set the core clock frequency for these
throughout. Lan969x only supports a core clock frequency of 328MHz.
Also, set the policer update internal (pol_upd_int) matching the 328 MHz
frequency of the lan969x targets.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-1-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver currently uses page_pool_put_page() to recycle
page pool pages. Since gve uses split pages, if the fragment
being recycled is not the last fragment in the page, there
is no dma sync operation. When the last fragment is recycled,
dma sync is performed by page pool infra according to the
value passed as dma_sync_size which right now is set to the
size of fragment.
But the correct thing to do is to dma sync the entire page when
the last fragment is recycled. Hence change to using
page_pool_put_full_page().
Link: https://lore.kernel.org/netdev/89d7ce83-cc1d-4791-87b5-6f7af29a031d@huawei.com/
Suggested-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Fixes: ebdfae0d377b ("gve: adopt page pool for DQ RDA mode")
Link: https://patch.msgid.link/20241023221141.3008011-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move mbox, hw resources and interrupt configuration functions to common
header file. So, that they can be used later by the RVU representor driver.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-5-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reuse the maximum support HW MTU value that is fetch during probe.
Instead of fetching through mbox each time mtu is changed as the
value is fixed for interface.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-4-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group the queue(RX/TX/CQ) memory allocation and free code to single APIs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-3-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define new API "otx2_init_rsrc" and move the HW blocks
NIX/NPA resources configuration code under this API. So, that
it can be used by the RVU representor driver that has similar
resources of RVU NIC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-2-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Debugging certain flows in the offloaded switch data path can be done by
installing two tc-mirred filters for mirroring: one in the hardware data
path, which copies the frames to the CPU, and one which takes the frame
from there and mirrors it to a virtual interface like a dummy device,
where it can be seen with tcpdump.
The effect of having 2 filters run on the same packet can be obtained by
default using tc, by not specifying either the 'skip_sw' or 'skip_hw'
keywords.
Instead of refusing to offload mirroring/redirecting packets towards
interfaces that aren't switch ports, just treat every other destination
for what it is: something that is handled in software, behind the CPU
port.
Usage:
$ ip link add dummy0 type dummy; ip link set dummy0 up
$ tc qdisc add dev swp0 clsact
$ tc filter add dev swp0 ingress protocol ip flower action mirred ingress mirror dev dummy0
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4c1 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes for v6.12-rc6
Another set of fixes, mostly iwlwifi:
* fix infinite loop in 6 GHz scan if more than
255 colocated APs were reported
* revert removal of retry loops for now to work
around issues with firmware initialization on
some devices/platforms
* fix SAR table issues with some BIOSes
* fix race in suspend/debug collection
* fix memory leak in fw recovery
* fix link ID leak in AP mode for older devices
* fix sending TX power constraints
* fix link handling in FW restart
And also the stack:
* fix setting TX power from userspace with the new
chanctx emulation code for old-style drivers
* fix a memory corruption bug due to structure
embedding
* fix CQM configuration double-free when moving
between net namespaces
* tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ieee80211_chanctx
wifi: iwlwifi: mvm: fix 6 GHz scan construction
wifi: cfg80211: clear wdev->cqm_config pointer on free
mac80211: fix user-power when emulating chanctx
Revert "wifi: iwlwifi: remove retry loops in start"
wifi: iwlwifi: mvm: don't add default link in fw restart flow
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
wifi: iwlwifi: mvm: SAR table alignment
wifi: iwlwifi: mvm: Use the sync timepoint API in suspend
wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd
wifi: iwlwifi: mvm: don't leak a link on AP removal
====================
Link: https://patch.msgid.link/20241029093926.13750-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This fixes an inconsistent indenting introduced with e3fc5139bd8f
("r8169: implement additional ethtool stats ops").
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202410220413.1gAxIJ4t-lkp@intel.com/
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20fd6f39-3c1b-4af0-9adc-7d1f49728fad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds support for new chip version RTL8125D, which can be found on
boards like Gigabyte X870E AORUS ELITE WIFI7. Firmware rtl8125d-1.fw
for this chip version is available in linux-firmware already.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/d0306912-e88e-4c25-8b5d-545ae8834c0c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024195534.176410-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer. Cleans up the code quite well.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024195833.176843-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a while loop in mlx5_eq_comp_int() and mlx5_eq_async_int() to
clarify the EQE polling logic. This consolidates the next_eqe_sw() calls
for the first and subequent iterations. It also avoids a goto. Turn the
num_eqes < MLX5_EQ_POLLING_BUDGET check into a break condition.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023205113.255866-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"enahnced" looks to be a misspelling of "enhanced".
Rename "mlx5_cqwq_get_cqe_enahnced_comp" to
"mlx5_cqwq_get_cqe_enhanced_comp".
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241023164840.140535-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022233203.9670-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The latter is the preferred way to copy ethtool strings.
Avoids manually incrementing the data pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/20241022204908.511021-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
They are the preferred way to copy ethtool strings.
Avoids manually incrementing the data pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022203240.391648-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consolidate the handling of dedicated PHY and fixed-link phy by taking
advantage of logic in of_phy_get_and_connect() which handles both of
these cases, rather than open coding the same logic in ftgmac100_probe().
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241022084214.1261174-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are a few issues with how SFP PHYs are attached:
a) The phylink_sfp_connect_phy() and phylink_sfp_config_phy() code
validates the configuration three times:
1. To discover the support/advertising masks that the PHY/PCS/MAC
can support in order to select an interface.
2. To validate the selected interface.
3. When the PHY is brought up after being attached, another validation
is done.
This is needlessly complex.
b) The configuration is set prior to the PHY being attached, which
means we don't have the PHY available in phylink_major_config()
for phylink_pcs_neg_mode() to make decisions upon.
We have already added an extra step to validate the selected interface,
so we can now move the attachment and bringup of the PHY earlier,
inside phylink_sfp_config_phy(). This results in the validation at
step 2 above becoming entirely unnecessary, so remove that too.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcb-000c8H-3e@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Validate that the returned interface from sfp_select_interface() is
supportable by the MAC/PCS. If it isn't, print an error and return
the NA interface type. This is a preparatory step to reorganising
how a PHY on a SFP module is handled.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcV-000c8B-Vz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Whenever we call sfp_select_interface(), we check the returned value
and print an error. There are two cases where this happens with the
same message. Provide a common function to do this.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1t3bcQ-000c85-S4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
phylink_parse_fixedlink() wants to preserve the pause, asym_pause and
autoneg bits in pl->supported. Rather than reading the bits into
separate bools, zeroing pl->supported, and then setting them if they
were previously set, use a mask and linkmode_and() to achieve the same
result.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1t3Fh5-000aQi-Nk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Quectel RG650V which is based on Qualcomm SDX65 chip.
The composition is DIAG / NMEA / AT / AT / QMI.
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2c7c ProdID=0122 Rev=05.15
S: Manufacturer=Quectel
S: Product=RG650V-EU
S: SerialNumber=xxxxxxx
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=9ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=9ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=9ms
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024151113.53203-1-benoit.monin@gmx.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the ring size changes successfully, trigger
netdev_update_features() to enable features in wanted state if
applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ethtool --set-ring eth1 rx 1024
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024164134.299646-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the MTU changes successfully, trigger netdev_update_features() to
enable features in wanted state if applicable.
An example of such scenario:
$ ip link set dev eth1 up
$ ethtool --set-ring eth1 rx 8192
$ ip link set dev eth1 mtu 9000
$ ethtool --features eth1 rx-gro-hw on --> fails
$ ip link set dev eth1 mtu 7000
With this patch, HW GRO will be turned on automatically because
it is set in the device's wanted_features.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241024164134.299646-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of dev_set_name() is potentially insecure.
E.g. clang-18 says:
drivers/net/wwan/wwan_core.c:442:34: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
442 | return dev_set_name(&port->dev, buf);
| ^~~
drivers/net/wwan/wwan_core.c:442:34: note: treat the string as an argument to avoid this
442 | return dev_set_name(&port->dev, buf);
| ^
| "%s",
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
No functional change intended.
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20241023-wwan-fmt-v1-1-521b39968639@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
nsim_nexthop_bucket_activity_write()
This was found by a static analyzer.
We should not forget the trailing zero after copy_from_user()
if we will further do some string operations, sscanf() in this
case. Adding a trailing zero will ensure that the function
performs properly.
Fixes: c6385c0b67c5 ("netdevsim: Allow reporting activity on nexthop buckets")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241022171907.8606-1-zichenxie0106@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing user space applications maintained by the Osmocom project are
breaking since a recent fix that addresses incorrect error checking.
Restore operation for user space programs that specify -1 as file
descriptor to skip GTPv0 or GTPv1 only sockets.
Fixes: defd8b3c37b0 ("gtp: fix a potential NULL pointer dereference")
Reported-by: Pau Espin Pedrol <pespin@sysmocom.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Oliver Smith <osmith@sysmocom.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022144825.66740-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
daddr can be NULL if there is no neighbour table entry present,
in that case the tx packet should be dropped.
saddr will usually be set by MCTP core, but check for NULL in case a
packet is transmitted by a different protocol.
Fixes: f5b8abf9fc3d ("mctp i2c: MCTP I2C binding driver")
Cc: stable@vger.kernel.org
Reported-by: Dung Cao <dung@os.amperecomputing.com>
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241022-mctp-i2c-null-dest-v3-1-e929709956c5@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On this Cisco MX60W, u-boot sets the local-mac-address property.
Unfortunately by default, the MAC is wrong and is actually located on a
UBI partition. Which means nvmem needs to be used to grab it.
In the case where that fails, EMAC fails to initialize instead of
generating a random MAC as many other drivers do.
Match behavior with other drivers to have a working ethernet interface.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It seems since inception that mutex_destroy was never called for these
in _remove. Instead of handling this manually, just use devm for
simplicity.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
No need for irq_of_parse_and_map since we have platform_device.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
