summaryrefslogtreecommitdiff
path: root/drivers/nfc/trf7970a.c
AgeCommit message (Expand)Author
2014-09-07NFC: trf7970a: Reread FIFO Status Register when draining FIFOMark A. Greer
2014-09-07NFC: trf7970a: Handle low-watermark IRQ when transmittingMark A. Greer
2014-09-07NFC: trf7970a: Only fill FIFO if there is spaceMark A. Greer
2014-09-07NFC: trf7970a: Prefix TX data when refilling FIFOMark A. Greer
2014-09-07NFC: trf7970a: Remove unnecessary FIFO reset & RSSI readMark A. Greer
2014-09-07NFC: trf7970a: Clear possible spurious interrupt before transmittingMark A. Greer
2014-09-07NFC: trf7970a: Recalculate driver timeout valuesMark A. Greer
2014-09-07NFC: trf7970a: Add RF technology specific guard timesMark A. Greer
2014-09-07NFC: trf7970a: Initialize when enabling RFMark A. Greer
2014-09-07NFC: trf7970a: Disable SYS_CLK OutputMark A. Greer
2014-09-07NFC: trf7970a: Remove unnecessary sleepMark A. Greer
2014-09-07NFC: trf7970a: FIFO Size is really 127 bytesMark A. Greer
2014-09-07NFC: trf7970a: Ignore Overflow bit in FIFO Status RegisterMark A. Greer
2014-09-07NFC: trf7970a: Use spi_sync() instead of spi_write_then_read()Mark A. Greer
2014-09-07NFC: trf7970a: Call spi_setup() to configure SPI communicationMark A. Greer
2014-09-07NFC: trf7970a: Remove trf7970a_tg_listen_mdaa()Mark A. Greer
2014-09-07NFC: trf7970a: Remove incorrect of_node_put() callMark A. Greer
2014-09-01NFC: trf7970a: Make gpio labels more readableMark A. Greer
2014-09-01NFC: trf7970a: Add quirk to keep EN2 lowMark A. Greer
2014-09-01NFC: trf7970a: Move IRQ Status Read quirk to device treeMark A. Greer
2014-09-01NFC: trf7970a: Add VIN voltage override supportMark A. Greer
2014-05-26NFC: trf7970a: Add support for Felica Type 3 tagsMark A. Greer
2014-04-22NFC: trf7970a: Add support for the ISO/IEC 14443-B and Type 4B tagsMark A. Greer
2014-04-22NFC: trf7970a: Add 'autosuspend-delay' DTS propertyMark A. Greer
2014-04-22NFC: trf7970a: Don't return value from trf7970a_switch_rf_on()Mark A. Greer
2014-04-22NFC: trf7970a: Add pm_runtime supportMark A. Greer
2014-04-22NFC: trf7970a: Turn RF on after hardware is configuredMark A. Greer
2014-04-22NFC: trf7970a: Set correct Vin voltage in Chip Status Control registerMark A. Greer
2014-04-22NFC: trf7970a: Allow different Modulator and SYS_CLK Control register valuesMark A. Greer
2014-04-22NFC: trf7970a: Set 'Modulator and SYS_CLK Control' after 'ISO Control'Mark A. Greer
2014-04-22NFC: trf7970a: Only write 'ISO Control' when its changingMark A. Greer
2014-04-22NFC: trf7970a: Reset FIFO when 'End of TX' Interrupt OccursMark A. Greer
2014-04-22NFC: trf7970a: Clear 'NFC Target Detection Level' registerMark A. Greer
2014-04-22NFC: trf7970a: Only abort a command if one is activeMark A. Greer
2014-04-22NFC: trf7970a: Increase TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT to 20 msMark A. Greer
2014-03-11NFC: trf7970a: Add ISO/IEC 15693 and Type 5 tag SupportMark A. Greer
2014-03-11NFC: trf7970a: Add support for Type 4A TagsMark A. Greer
2014-03-11NFC: trf7970a: Add driver with ISO/IEC 14443 Type 2 Tag SupportMark A. Greer