summaryrefslogtreecommitdiff
path: root/drivers/pci/pcie
AgeCommit message (Collapse)Author
2020-12-15Merge branch 'pci/ptm'Bjorn Helgaas
- Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) * pci/ptm: PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume
2020-12-15Merge branch 'pci/err'Bjorn Helgaas
- Stop writing AER Capability when we don't own it (Sean V Kelley) - Bind RCEC devices to the Port driver (Qiuxu Zhuo) - Cache the RCEC RA Capability offset (Sean V Kelley) - Add pci_walk_bridge() (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs with RCECs (Sean V Kelley) - Recover from RCiEP AER errors (Sean V Kelley) - Add pcie_walk_rcec() for RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() for RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) * pci/err: PCI/AER: Add RCEC AER error injection support PCI/PME: Add pcie_walk_rcec() to RCEC PME handling PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/ERR: Recover from RCiEP AER errors PCI/ERR: Add pcie_link_rcec() to associate RCiEPs PCI/ERR: Recover from RCEC AER errors PCI/ERR: Clear AER status only when we control AER PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery() PCI/ERR: Avoid negated conditional for clarity PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Simplify by computing pci_pcie_type() once PCI/ERR: Simplify by using pci_upstream_bridge() PCI/ERR: Rename reset_link() to reset_subordinates() PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities() PCI/ERR: Bind RCEC devices to the Root Port driver PCI/AER: Write AER Capability only when we control it
2020-12-10PCI: Disable PTM during suspend to save powerDavid E. Box
There are systems (for example, Intel based mobile platforms since Coffee Lake) where the power drawn while suspended can be significantly reduced by disabling Precision Time Measurement (PTM) on PCIe root ports as this allows the port to enter a lower-power PM state and the SoC to reach a lower-power idle state. To save this power, disable the PTM feature on root ports during pci_prepare_to_sleep() and pci_finish_runtime_suspend(). The feature will be returned to its previous state during restore and error recovery. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209361 Link: https://lore.kernel.org/r/20201207223951.19667-2-david.e.box@linux.intel.com Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-10PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resumeDavid E. Box
The PCI subsystem does not currently save and restore the configuration space for the Precision Time Measurement (PTM) Extended Capability leading to the possibility of the feature returning disabled on S3 resume. This has been observed on Intel Coffee Lake desktops. Add save/restore of the PTM control register. This saves the PTM Enable, Root Select, and Effective Granularity bits. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20201207223951.19667-1-david.e.box@linux.intel.com Signed-off-by: David E. Box <david.e.box@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/AER: Add RCEC AER error injection supportQiuxu Zhuo
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and may also have the AER capability. Add RCEC support to the AER error injection driver. Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-16-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-05PCI/PME: Add pcie_walk_rcec() to RCEC PME handlingSean V Kelley
Root Complex Event Collectors (RCEC) appear as peers of Root Ports and also have the PME capability. As with AER, there is a need to be able to walk the RCiEPs associated with their RCEC for purposes of acting upon them with callbacks. Add RCEC support through the use of pcie_walk_rcec() to the current PME service driver and attach the PME service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-15-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/AER: Add pcie_walk_rcec() to RCEC AER handlingSean V Kelley
Root Complex Event Collectors (RCEC) appear as peers to Root Ports and also have the AER capability. In addition, actions need to be taken for associated RCiEPs. In such cases the RCECs will need to be walked in order to find and act upon their respective RCiEPs. Extend the existing ability to link the RCECs with a walking function pcie_walk_rcec(). Add RCEC support to the current AER service driver and attach the AER service driver to the RCEC device. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-14-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-05PCI/ERR: Recover from RCiEP AER errorsQiuxu Zhuo
Add support for handling AER errors detected by Root Complex Integrated Endpoints (RCiEPs). These errors are signaled to software natively via a Root Complex Event Collector (RCEC) or non-natively via ACPI APEI if the platform retains control of AER or uses a non-standard RCEC-like device. When recovering from RCiEP errors, the Root Error Command and Status registers are in the AER Capability of an associated RCEC (if any), not in a Root Port. In the non-native case, the platform is responsible for those registers and we can't touch them. [bhelgaas: commit log, etc] Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-13-sean.v.kelley@intel.com Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-05PCI/ERR: Add pcie_link_rcec() to associate RCiEPsSean V Kelley
A Root Complex Event Collector terminates error and PME messages from associated RCiEPs. Use the RCEC Endpoint Association Extended Capability to identify associated RCiEPs. Link the associated RCiEPs as the RCECs are enumerated. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-12-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-05PCI/ERR: Recover from RCEC AER errorsSean V Kelley
A Root Complex Event Collector (RCEC) collects and signals AER errors that were detected by Root Complex Integrated Endpoints (RCiEPs), but it may also signal errors it detects itself. This is analogous to errors detected and signaled by a Root Port. Update the AER service driver to claim RCECs in addition to Root Ports. Add support for handling RCEC-detected AER errors. This does not include handling RCiEP-detected errors that are signaled by the RCEC. Note that we expect these errors only from the native AER and APEI paths, not from DPC or EDR. [bhelgaas: split from combined RCEC/RCiEP patch, commit log] Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Clear AER status only when we control AERSean V Kelley
In some cases a bridge may not exist as the hardware controlling may be handled only by firmware and so is not visible to the OS. This scenario is also possible in future use cases involving non-native use of RCECs by firmware. In this scenario, we expect the platform to retain control of the bridge and to clear error status itself. Clear error status only when the OS has native control of AER. Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Add pci_walk_bridge() to pcie_do_recovery()Sean V Kelley
Consolidate subordinate bus checks with pci_walk_bus() into pci_walk_bridge() for walking below potentially AER affected bridges. Link: https://lore.kernel.org/r/20201121001036.8560-10-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-12-04PCI/ERR: Avoid negated conditional for claritySean V Kelley
Reverse the sense of the Root Port/Downstream Port conditional for clarity. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-9-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Use "bridge" for clarity in pcie_do_recovery()Sean V Kelley
pcie_do_recovery() may be called with "dev" being either a bridge (Root Port or Switch Downstream Port) or an Endpoint. The bulk of the function deals with the bridge, so if we start with an Endpoint, we reset "dev" to be the bridge leading to it. For clarity, replace "dev" in the body of the function with "bridge". No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-8-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Simplify by computing pci_pcie_type() onceSean V Kelley
Instead of calling pci_pcie_type(dev) twice, call it once and save the result. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-7-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Simplify by using pci_upstream_bridge()Sean V Kelley
Use pci_upstream_bridge() in place of dev->bus->self. No functional change intended. Link: https://lore.kernel.org/r/20201121001036.8560-6-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Rename reset_link() to reset_subordinates()Sean V Kelley
reset_link() appears to be misnamed. The point is to reset any devices below a given bridge, so rename it to reset_subordinates() to make it clear that we are passing a bridge with the intent to reset the devices below it. Link: https://lore.kernel.org/r/20201121001036.8560-5-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Cache RCEC EA Capability offset in pci_init_capabilities()Sean V Kelley
Extend support for Root Complex Event Collectors by decoding and caching the RCEC Endpoint Association Extended Capabilities when enumerating. Use that cached information for later error source reporting. See PCIe r5.0, sec 7.9.10. Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-4-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-04PCI/ERR: Bind RCEC devices to the Root Port driverQiuxu Zhuo
If a Root Complex Integrated Endpoint (RCiEP) is implemented, it may signal errors through a Root Complex Event Collector (RCEC). Each RCiEP must be associated with no more than one RCEC. For an RCEC (which is technically not a Bridge), error messages "received" from associated RCiEPs must be enabled for "transmission" in order to cause a System Error via the Root Control register or (when the Advanced Error Reporting Capability is present) reporting via the Root Error Command register and logging in the Root Error Status register and Error Source Identification register. Given the commonality with Root Ports and the need to also support AER and PME services for RCECs, extend the Root Port driver to support RCEC devices by adding the RCEC Class ID to the driver structure. Co-developed-by: Sean V Kelley <sean.v.kelley@intel.com> Link: https://lore.kernel.org/r/20201121001036.8560-3-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2020-12-01PCI/AER: Write AER Capability only when we control itSean V Kelley
If an OS has not been granted AER control via _OSC, it should not make changes to PCI_ERR_ROOT_COMMAND and PCI_ERR_ROOT_STATUS related registers. Per section 4.5.1 of the System Firmware Intermediary (SFI) _OSC and DPC Updates ECN [1], this bit also covers these aspects of the PCI Express Advanced Error Reporting. Based on the above and earlier discussion [2], make the following changes: Add a check for the native case (i.e., AER control via _OSC) Note that the previous "clear, reset, enable" order suggests that the reset might cause errors that we should ignore. After this commit, those errors (if any) will remain logged in the PCI_ERR_ROOT_STATUS register. [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [2] https://lore.kernel.org/linux-pci/20201020162820.GA370938@bjorn-Precision-5520/ Link: https://lore.kernel.org/r/20201121001036.8560-2-sean.v.kelley@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # non-native/no RCEC Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-20PCI/ASPM: Save/restore L1SS Capability for suspend/resumeVidya Sagar
Previously ASPM L1 Substates control registers (CTL1 and CTL2) weren't saved and restored during suspend/resume leading to L1 Substates configuration being lost post-resume. Save the L1 Substates control registers so that the configuration is retained post-resume. Link: https://lore.kernel.org/r/20201024190442.871-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-21Merge branch 'pci/misc'Bjorn Helgaas
- Remove unnecessary #includes (Gustavo Pimentel) - Fix intel_mid_pci.c build error when !CONFIG_ACPI (Randy Dunlap) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Simplify pci-pf-stub by using module_pci_driver() (Liu Shixin) - Print IRQ used by Link Bandwidth Notification (Dongdong Liu) - Update sysfs mmap-related #ifdef comments (Clint Sbisa) - Simplify pci_dev_reset_slot_function() (Lukas Wunner) - Use "NULL" instead of "0" to fix sparse warnings (Gustavo Pimentel) - Simplify bool comparisons (Krzysztof Wilczyński) - Drop double zeroing for P2PDMA sg_init_table() (Julia Lawall) * pci/misc: PCI: v3-semi: Remove unneeded break PCI/P2PDMA: Drop double zeroing for sg_init_table() PCI: Simplify bool comparisons PCI: endpoint: Use "NULL" instead of "0" as a NULL pointer PCI: Simplify pci_dev_reset_slot_function() PCI: Update mmap-related #ifdef comments PCI/LINK: Print IRQ number used by port PCI/IOV: Simplify pci-pf-stub with module_pci_driver() PCI: Use scnprintf(), not snprintf(), in sysfs "show" functions x86/PCI: Fix intel_mid_pci.c build error when ACPI is not enabled PCI: Remove unnecessary header includes
2020-10-21Merge branch 'pci/hotplug'Bjorn Helgaas
- Use for_each_child_of_node() and for_each_node_by_name() instead of open-coding them (Qinglang Miao) - Reduce pciehp noisiness on hot removal (Lukas Wunner) - Remove unused assignment in shpchp (Krzysztof Wilczyński) * pci/hotplug: PCI: shpchp: Remove unused 'rc' assignment PCI: pciehp: Reduce noisiness on hot removal PCI: rpadlpar: Use for_each_child_of_node() and for_each_node_by_name()
2020-10-16PCI/ASPM: Remove struct pcie_link_state.l1ssSaheed O. Bolarinwa
Previously we computed L1.2 parameters in the enumeration path, saved them in struct pcie_link_state.l1ss, and programmed them into the devices whenever we enabled or disabled L1.2 on the link. But these parameters are constant and don't need to be updated when enabling/disabling L1.2. Compute and program the L1.2 parameters once during enumeration and remove the struct pcie_link_state.l1ss member. No functional change intended. [bhelgaas: rework to program L1.2 parameters during enumeration] Link: https://lore.kernel.org/r/20201015193039.12585-13-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_capSaheed O. Bolarinwa
Previously we stored the L1SS Capabilities value in the struct aspm_register_info. We only need this information in one place, so read it there and remove struct aspm_register_info completely, since it's now empty. No functional change intended. [bhelgaas: split up, don't cache l1ss_cap in pci_dev] Link: https://lore.kernel.org/r/20201015193039.12585-12-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_infoBjorn Helgaas
aspm_calc_l1ss_info() needs only the L1SS Capabilities. It doesn't need anything else from struct aspm_register_info, so pass only the Capabilities value. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1Saheed O. Bolarinwa
Previously we stored the L1SS Control 1 register in the struct aspm_register_info. We only need this information in one place, so read it there and remove it from struct aspm_register_info. No functional change intended. [bhelgaas: split ctl1/ctl2] Link: https://lore.kernel.org/r/20201015193039.12585-10-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)Bjorn Helgaas
We never use the aspm_register_info.l1ss_ctl2 value, so remove it. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-9-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptrSaheed O. Bolarinwa
Save the L1 Substates Capability pointer in struct pci_dev. Then we don't have to keep track of it in the struct aspm_register_info and struct pcie_link_state, which makes the code easier to read. No functional change intended. [bhelgaas: split to a separate patch] Link: https://lore.kernel.org/r/20201015193039.12585-8-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.latency_encodingSaheed O. Bolarinwa
Previously we stored L0s and L1 Exit Latency information from the Link Capabilities register in the struct aspm_register_info. We only need these latencies when we already have the Link Capabilities values, so use those directly and remove the latencies from struct aspm_register_info. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-7-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.enabledSaheed O. Bolarinwa
Previously we stored the "ASPM Control" bits from the Link Control register in the struct aspm_register_info. Read PCI_EXP_LNKCTL directly when needed. This means we can use the PCI_EXP_LNKCTL_ASPM_* bits directly instead of the similar but different PCIE_LINK_STATE_* bits. No functional change intended. [bhelgaas: drop get_aspm_enable() and read LNKCTL once directly] Link: https://lore.kernel.org/r/20201015193039.12585-6-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Remove struct aspm_register_info.supportSaheed O. Bolarinwa
Previously we stored the "ASPM Support" field from the Link Capabilities register in the struct aspm_register_info. Read the Link Capabilities directly when needed and remove it from the struct aspm_register_info. No functional change intended. [bhelgaas: remove pci_dev cached copy since LNKCAP isn't truly read-only, add PCI_EXP_LNKCAP_ASPM_L0S & PCI_EXP_LNKCAP_ASPM_L1, check them directly instead of adding aspm_support()] Link: https://lore.kernel.org/r/20201015193039.12585-5-helgaas@kernel.org Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Use 'parent' and 'child' for readabilityBjorn Helgaas
Other users of link->pdev and link->downstream, e.g., pcie_aspm_cap_init(), pcie_config_aspm_l1ss(), and pcie_config_aspm_link(), use "parent" and "child" as local names. Do the same in aspm_calc_l1ss_info() for readability. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Move LTR path check to where it's usedBjorn Helgaas
pcie_get_aspm_reg() mostly reads ASPM-related registers, but in some cases it also updates the value read from PCI_L1SS_CAP based on LTR properties. Move this update to the point where the value is used to make the code more readable. No functional change intended, although previously we could clear PCI_L1SS_CAP_ASPM_L1_2 for both ends of the link, and now we'll only do it for the downstream end of a link. This shouldn't matter because we always test that bit by ANDing l1ss_cap for the upstream and downstream ends. Link: https://lore.kernel.org/r/20201015193039.12585-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-16PCI/ASPM: Move pci_clear_and_set_dword() earlierBjorn Helgaas
Move pci_clear_and_set_dword() earlier in file to prepare for future patch. No functional change intended. Link: https://lore.kernel.org/r/20201015193039.12585-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-17PCI: pciehp: Reduce noisiness on hot removalLukas Wunner
When a PCIe card is hot-removed, the Presence Detect State and Data Link Layer Link Active bits often do not clear simultaneously. I've seen delays of up to 244 msec between the two events with Thunderbolt. After pciehp has brought down the slot in response to the first event, the other bit may still be set. It's not discernible whether it's set because a new card is already in the slot or if it will soon clear. So pciehp tries to bring up the slot and in the latter case fails with a bunch of messages, some of them at KERN_ERR severity. If the slot is no longer occupied, the messages are false positives and annoy users. Stuart Hayes reports the following splat on hot removal: KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Link Up KERN_INFO pcieport 0000:3c:06.0: pciehp: Timeout waiting for Presence Detect KERN_ERR pcieport 0000:3c:06.0: pciehp: link training error: status 0x0001 KERN_ERR pcieport 0000:3c:06.0: pciehp: Failed to check link status Dongdong Liu complains about a similar splat: KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Link Down KERN_INFO iommu: Removing device 0000:87:00.0 from group 12 KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Card present KERN_INFO pcieport 0000:80:10.0: Data Link Layer Link Active not set in 1000 msec KERN_ERR pciehp 0000:80:10.0:pcie004: Failed to check link status Users are particularly irritated to see a bringup attempt even though the slot was explicitly brought down via sysfs. In a perfect world, we could avoid this by setting Link Disable on slot bringdown and re-enabling it upon a Presence Detect State change. In reality however, there are broken hotplug ports which hardwire Presence Detect to zero, see 80696f991424 ("PCI: pciehp: Tolerate Presence Detect hardwired to zero"). Conversely, PCIe r1.0 hotplug ports hardwire Link Active to zero because Link Active Reporting wasn't specified before PCIe r1.1. On unplug, some ports first clear Presence then Link (see Stuart Hayes' splat) whereas others use the inverse order (see Dongdong Liu's splat). To top it off, there are hotplug ports which flap the Presence and Link bits on slot bringup, see 6c35a1ac3da6 ("PCI: pciehp: Tolerate initially unstable link"). pciehp is designed to work with all of these variants. Surplus attempts at slot bringup are a lesser evil than not being able to bring up slots at all. Although we could try to perfect the behavior for specific hotplug controllers, we'd risk breaking others or increasing code complexity. But we can certainly minimize annoyance by emitting only a single message with KERN_INFO severity if bringup is unsuccessful: * Drop the "Timeout waiting for Presence Detect" message in pcie_wait_for_presence(). The sole caller of that function, pciehp_check_link_status(), ignores the timeout and carries on. It emits error messages of its own and I don't think this particular message adds much value. * There's a single error condition in pciehp_check_link_status() which does not emit a message. Adding one allows dropping the "Failed to check link status" message emitted by board_added() if pciehp_check_link_status() returns a non-zero integer. * Tone down all messages in pciehp_check_link_status() to KERN_INFO severity and rephrase them to look as innocuous as possible. To this end, move the message emitted by pcie_wait_for_link_delay() to its callers. As a result, Stuart Hayes' splat becomes: KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Link Up KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Cannot train link: status 0x0001 Dongdong Liu's splat becomes: KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Card present KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): No link The messages now merely serve as information that presence or link bits were set a little longer than expected. Bringup failures which are not false positives are still reported, albeit no longer at KERN_ERR severity. Link: https://lore.kernel.org/linux-pci/20200310182100.102987-1-stuart.w.hayes@gmail.com/ Link: https://lore.kernel.org/linux-pci/1547649064-19019-1-git-send-email-liudongdong3@huawei.com/ Link: https://lore.kernel.org/r/b45e46fd8a6aa6930aaac9d7718c2e4b787a4e5e.1595935071.git.lukas@wunner.de Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com> Reported-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-17PCI/LINK: Print IRQ number used by portDongdong Liu
Print the IRQ used by PCIe Link Bandwidth Notification services port as AER, PME and DPC do. It provides convenience to track PCIe BW notification interrupt counts of certain port from /proc/interrupts. The dmesg log is as below: pcieport 0000:00:00.0: bw_notification: enabled with IRQ 1166 Link: https://lore.kernel.org/r/1599737055-73624-1-git-send-email-liudongdong3@huawei.com Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-08-05Merge branch 'pci/misc'Bjorn Helgaas
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Update panic message to mention kzalloc(), not kmalloc() (Liao Pingfang) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Remove unused pci_lost_interrupt() (Heiner Kallweit) * pci/misc: PCI: Remove unused pci_lost_interrupt() PCI: Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h PCI: Fix error in panic message PCI: Replace lkml.org, spinics, gmane with lore.kernel.org PCI: Replace http:// links with https:// PCI: Align PCIe capability and PCI accessor return values PCI: Convert PCIe capability PCIBIOS errors to errno
2020-08-05Merge branch 'pci/error'Bjorn Helgaas
- Use pci_channel_state_t instead of enum pci_channel_state (Luc Van Oostenryck) - Simplify __aer_print_error() (Bjorn Helgaas) - Log AER correctable errors as warning, not error (Matt Jolly) - Rename pci_aer_clear_device_status() to pcie_clear_device_status() (Bjorn Helgaas) - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) * pci/error: PCI/ERR: Clear PCIe Device Status errors only if OS owns AER PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status() PCI/AER: Log correctable errors as warning, not error PCI/AER: Simplify __aer_print_error() PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'
2020-07-22PCI/ERR: Clear PCIe Device Status errors only if OS owns AERJonathan Cameron
pcie_clear_device_status() resets the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Previously we did this unconditionally, but on ACPI systems, the _OSC AER bit negotiates control of the AER capability. Per sec 4.5.1 of the System Firmware Intermediary _OSC and DPC Updates ECN [1], this bit also covers other error enable/status bits including the following: Correctable Error Reporting Enable Non-Fatal Error Reporting Enable Fatal Error Reporting Enable Unsupported Request Reporting Enable These bits are all in the PCIe Device Control register (the ECN omitted "Reporting", but I think that's a typo), so by implication the _OSC AER bit also applies to the error status bits in the PCIe Device Status register: Correctable Error Detected Non-Fatal Error Detected Fatal Error Detected Unsupported Request Detected Clear the PCIe Device Status error bits only when the OS controls the AER capability and related error enable/status bits. If platform firmware controls the AER capability, firmware is responsible for clearing these bits. One call path leading here is: ghes_do_proc ghes_handle_aer aer_recover_queue schedule_work(&aer_recover_work) ... aer_recover_work_func pcie_do_recovery pcie_clear_device_status [1] System Firmware Intermediary (SFI) _OSC and DPC Updates ECN, Feb 24, 2020, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/14076 [bhelgaas: commit log, move test from pcie_clear_device_status() to callers] Link: https://lore.kernel.org/r/20200622113523.891666-1-Jonathan.Cameron@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-22PCI/ERR: Rename pci_aer_clear_device_status() to pcie_clear_device_status()Bjorn Helgaas
pci_aer_clear_device_status() clears the error bits in the PCIe Device Status Register (PCI_EXP_DEVSTA). Every PCIe device has this register, regardless of whether it supports AER. Rename pci_aer_clear_device_status() to pcie_clear_device_status() to make clear that it is PCIe-specific but not AER-specific. Move it to drivers/pci/pci.c, again since it's not AER-specific. No functional change intended. Link: https://lore.kernel.org/r/20200717195619.766662-1-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-17PCI/ASPM: Add missing newline in sysfs 'policy'Xiongfeng Wang
When I cat ASPM parameter 'policy' by sysfs, it displays as follows. Add a newline for easy reading. Other sysfs attributes already include a newline. [root@localhost ~]# cat /sys/module/pcie_aspm/parameters/policy [default] performance powersave powersupersave [root@localhost ~]# Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/1594972765-10404-1-git-send-email-wangxiongfeng2@huawei.com Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-07PCI/AER: Log correctable errors as warning, not errorMatt Jolly
PCIe correctable errors are recovered by hardware with no need for software intervention (PCIe r5.0, sec 6.2.2.1). Reduce the log level of correctable errors from KERN_ERR to KERN_WARNING. The bug reports below are for correctable error logging. This doesn't fix the cause of those reports, but it may make the messages less alarming. [bhelgaas: commit log, use pci_printk() to avoid code duplication] Link: https://bugzilla.kernel.org/show_bug.cgi?id=201517 Link: https://bugzilla.kernel.org/show_bug.cgi?id=196183 Link: https://lore.kernel.org/r/20200618155511.16009-1-Kangie@footclan.ninja Signed-off-by: Matt Jolly <Kangie@footclan.ninja> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-07PCI/AER: Simplify __aer_print_error()Bjorn Helgaas
aer_correctable_error_string[] and aer_uncorrectable_error_string[] have descriptions of AER error status bits. Add NULL entries to these tables so all entries for bits 0-31 are defined. Then we don't have to check for ARRAY_SIZE() when decoding a status word, which simplifies __aer_print_error(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-07PCI: Use 'pci_channel_state_t' instead of 'enum pci_channel_state'Luc Van Oostenryck
The method struct pci_error_handlers.error_detected() is defined and documented as taking an 'enum pci_channel_state' for the second argument, but most drivers use 'pci_channel_state_t' instead. This 'pci_channel_state_t' is not a typedef for the enum but a typedef for a bitwise type in order to have better/stricter typechecking. Consolidate everything by using 'pci_channel_state_t' in the method's definition, in the related helpers and in the drivers. Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state' with an anonymous 'enum'. Note: Currently, from a typechecking point of view this patch changes nothing because only the constants defined by the enum are bitwise, not the enum itself (sparse doesn't have the notion of 'bitwise enum'). This may change in some not too far future, hence the patch. [bhelgaas: squash in https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.com https://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com] Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-30PCI: Replace http:// links with https://Alexander A. Klimov
Replace http:// links with https:// links. This reduces the likelihood of man-in-the-middle attacks when developers open these links. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. [bhelgaas: also update samsung.com links, drop sourceforge link] Link: https://lore.kernel.org/r/20200627103050.71712-1-grandmaster@al2klimov.de Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-26PCI: Convert PCIe capability PCIBIOS errors to errnoBolarinwa Olayemi Saheed
The PCI config accessors (pci_read_config_word(), et al) return PCIBIOS_SUCCESSFUL (zero) or positive error values like PCIBIOS_FUNC_NOT_SUPPORTED. The PCIe capability accessors (pcie_capability_read_word(), et al) similarly return PCIBIOS errors, but some callers assume they return generic errno values like -EINVAL. For example, the Myri-10G probe function returns a positive PCIBIOS error if the pcie_capability_clear_and_set_word() in pcie_set_readrq() fails: myri10ge_probe status = pcie_set_readrq return pcie_capability_clear_and_set_word if (status) return status A positive return from a PCI driver probe function would cause a "Driver probe function unexpectedly returned" warning from local_pci_probe() instead of the desired probe failure. Convert PCIBIOS errors to generic errno for all callers of: pcie_capability_read_word pcie_capability_read_dword pcie_capability_write_word pcie_capability_write_dword pcie_capability_set_word pcie_capability_set_dword pcie_capability_clear_word pcie_capability_clear_dword pcie_capability_clear_and_set_word pcie_capability_clear_and_set_dword that check the return code for anything other than zero. [bhelgaas: commit log, squash together] Suggested-by: Bjorn Helgaas <bjorn@helgaas.com> Link: https://lore.kernel.org/r/20200615073225.24061-1-refactormyself@gmail.com Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-27 07:30:01 +0000