summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2024-02-19PCI/MSI: Prevent MSI hardware interrupt number truncationVidya Sagar
While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
2024-02-17Merge tag 'pci-v6.8-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Keep bridges in D0 if we need to poll downstream devices for PME to resolve a v6.6 regression where we failed to enumerate devices below bridges put in D3hot by runtime PM, e.g., NVMe drives connected via Thunderbolt or USB4 docks (Alex Williamson) - Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer * tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer PCI: Fix active state requirement in PME polling
2024-02-09PCI: Fix active state requirement in PME pollingAlex Williamson
The commit noted in fixes added a bogus requirement that runtime PM managed devices need to be in the RPM_ACTIVE state for PME polling. In fact, only devices in low power states should be polled. However there's still a requirement that the device config space must be accessible, which has implications for both the current state of the polled device and the parent bridge, when present. It's not sufficient to assume the bridge remains in D0 and cases have been observed where the bridge passes the D0 test, but the PM state indicates RPM_SUSPENDING and config space of the polled device becomes inaccessible during pci_pme_wakeup(). Therefore, since the bridge is already effectively required to be in the RPM_ACTIVE state, formalize this in the code and elevate the PM usage count to maintain the state while polling the subordinate device. This resolves a regression reported in the bugzilla below where a Thunderbolt/USB4 hierarchy fails to scan for an attached NVMe endpoint downstream of a bridge in a D3hot power state. Link: https://lore.kernel.org/r/20240123185548.1040096-1-alex.williamson@redhat.com Fixes: d3fcd7360338 ("PCI: Fix runtime PM race with PME polling") Reported-by: Sanath S <sanath.s@amd.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218360 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Sanath S <sanath.s@amd.com> Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-02-09Merge tag 'pci-v6.8-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci fixes from Bjorn Helgaas: - Fix an unintentional truncation of DWC MSI-X address to 32 bits and update similar MSI code to match (Dan Carpenter) * tag 'pci-v6.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignment PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()
2024-02-07PCI: dwc: Clean up dw_pcie_ep_raise_msi_irq() alignmentDan Carpenter
I recently changed the alignment code in dw_pcie_ep_raise_msix_irq(). The code in dw_pcie_ep_raise_msi_irq() is similar, so update it to match, just for consistency. (No effect on runtime, just a cleanup). Link: https://lore.kernel.org/r/184097e0-c728-42c7-9e8a-556bd33fb612@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-02-07PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()Dan Carpenter
The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Niklas Cassel <cassel@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: <stable@vger.kernel.org>
2024-01-31PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold
A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
2024-01-18Merge tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds
Pull CXL (Compute Express Link) updates from Dan Williams: "The bulk of this update is support for enumerating the performance capabilities of CXL memory targets and connecting that to a platform CXL memory QoS class. Some follow-on work remains to hook up this data into core-mm policy, but that is saved for v6.9. The next significant update is unifying how CXL event records (things like background scrub errors) are processed between so called "firmware first" and native error record retrieval. The CXL driver handler that processes the record retrieved from the device mailbox is now the handler for that same record format coming from an EFI/ACPI notification source. This also contains miscellaneous feature updates, like Get Timestamp, and other fixups. Summary: - Add support for parsing the Coherent Device Attribute Table (CDAT) - Add support for calculating a platform CXL QoS class from CDAT data - Unify the tracing of EFI CXL Events with native CXL Events. - Add Get Timestamp support - Miscellaneous cleanups and fixups" * tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits) cxl/core: use sysfs_emit() for attr's _show() cxl/pci: Register for and process CPER events PCI: Introduce cleanup helpers for device reference counts and locks acpi/ghes: Process CXL Component Events cxl/events: Create a CXL event union cxl/events: Separate UUID from event structures cxl/events: Remove passing a UUID to known event traces cxl/events: Create common event UUID defines cxl/events: Promote CXL event structures to a core header cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe() cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge() cxl: Fix device reference leak in cxl_port_perf_data_calculate() cxl: Convert find_cxl_root() to return a 'struct cxl_root *' cxl: Introduce put_cxl_root() helper cxl/port: Fix missing target list lock cxl/port: Fix decoder initialization when nr_targets > interleave_ways cxl/region: fix x9 interleave typo cxl/trace: Pass UUID explicitly to event traces cxl/region: use %pap format to print resource_size_t cxl/region: Add dev_dbg() detail on failure to allocate HPA space ...
2024-01-17Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2024-01-17Merge tag 'pci-v6.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Reserve ECAM so we don't assign it to PCI BARs; this works around bugs where BIOS included ECAM in a PNP0A03 host bridge window, didn't reserve it via a PNP0C02 motherboard device, and didn't allocate space for SR-IOV VF BARs (Bjorn Helgaas) - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas) - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas) - Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log bridges before downstream devices so the dmesg order is more logical (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) Resource management: - Restructure pci_dev_for_each_resource() to avoid computing the address of an out-of-bounds array element (the bounds check was performed later so the element was never actually *read*, but it's nicer to avoid even computing an out-of-bounds address) (Andy Shevchenko) Driver binding: - Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) - Drop unused struct pci_driver.node member (Mathias Krause) Virtualization: - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) Error handling: - Log AER errors as "Correctable" (not "Corrected") or "Uncorrectable" to match spec terminology (Bjorn Helgaas) - Decode Requester ID when no error info found instead of printing the raw hex value (Bjorn Helgaas) Endpoint framework: - Use a unique test pattern for each BAR in the pci_endpoint_test to make it easier to debug address translation issues (Niklas Cassel) Broadcom STB PCIe controller driver: - Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan) Freescale Layerscape PCIe controller driver: - Add suspend/resume support for Layerscape LS1043a and LS1021a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) MediaTek PCIe controller driver: - Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) Qualcomm PCIe controller driver: - Increase qcom iommu-map maxItems to accommodate SDX55 (five entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski) - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof Kozlowski) - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof Kozlowski) - Correct the qcom "reset-name" property, previously incorrectly called "reset-names" (Krzysztof Kozlowski) - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil Armstrong) Renesas R-Car PCIe controller driver: - Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) SiFive FU740 PCIe controller driver: - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) Synopsys DesignWare PCIe controller driver: - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) TI J721E PCIe driver: - Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) TI Keystone PCIe controller driver: - Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) Xilinx XDMA PCIe controller driver: - Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) MicroSemi Switchtec management driver: - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) Miscellaneous: - Convert interrupt terminology from "legacy" to "INTx" to be more specific and match spec terminology (Damien Le Moal) - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of deprecated ida_simple_*() API with ida_alloc() and ida_free() (Christophe JAILLET)" * tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Fix kernel-doc issues PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler PCI: keystone: Fix race condition when initializing PHYs PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members misc: pci_endpoint_test: Use a unique test pattern for each BAR PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI/AER: Use explicit register sizes for struct members PCI/AER: Decode Requester ID when no error info found PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors ...
2024-01-15Merge branch 'pci/endpoint'Bjorn Helgaas
- Make struct pci_epc_event_ops and struct pci_epf_ops instances const (Lars-Peter Clausen) * pci/endpoint: PCI: endpoint: pci-epf-test: Make struct pci_epf_ops const PCI: endpoint: pci-epf-vntb: Make struct pci_epf_ops const PCI: endpoint: pci-epf-ntb: Make struct pci_epf_ops const PCI: endpoint: pci-epf-mhi: Make structs pci_epf_ops and pci_epf_event_ops const PCI: endpoint: Make struct pci_epf_ops in pci_epf_driver const
2024-01-15Merge branch 'pci/irq-clean-up'Bjorn Helgaas
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more explicit and match spec terminology (Bjorn Helgaas) - Use existing PCI_IRQ_INTX, PCI_IRQ_MSI, PCI_IRQ_MSIX in artpec6, cadence, designware, designware-plat, dra7xx, imx6, keembay, keystone, layerscape, mhi, ntb, qcom, rcar, rcar-gen4, rockchip, tegra194, uniphier, vntb; drop the redundant pci_epc_irq_type enum with the same values (Damien Le Moal) - Use "intx" instead of "leg" or "legacy" when describing INTx interrupts in endpoint core, endpoint tests, cadence, dra7xx, designware, dw-rockchip, dwc core, imx6, keystone, layerscape, qcom, rcar-gen4, rockchip, tegra194, uniphier, xilinx-nwl (Damien Le Moal) * pci/irq-clean-up: PCI: xilinx-nwl: Use INTX instead of legacy PCI: rockchip-host: Rename rockchip_pcie_legacy_int_handler() PCI: rockchip-ep: Use INTX instead of legacy PCI: uniphier: Use INTX instead of legacy PCI: tegra194: Use INTX instead of legacy PCI: dw-rockchip: Rename rockchip_pcie_legacy_int_handler() PCI: keystone: Use INTX instead of legacy PCI: dwc: Rename dw_pcie_ep_raise_legacy_irq() PCI: cadence: Use INTX instead of legacy PCI: dra7xx: Rename dra7xx_pcie_raise_legacy_irq() misc: pci_endpoint_test: Use INTX instead of LEGACY PCI: endpoint: Rename LEGACY to INTX in test function driver PCI: endpoint: Use INTX instead of legacy PCI: endpoint: Drop PCI_EPC_IRQ_XXX definitions PCI: Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX
2024-01-15Merge branch 'pci/controller/remove-void-return'Bjorn Helgaas
- Convert exynos, keystone, kirin from .remove() to .remove_new(), which returns void instead of int (Uwe Kleine-König) * pci/controller/remove-void-return: PCI: kirin: Convert to platform remove callback returning void PCI: keystone: Convert to platform remove callback returning void PCI: exynos: Convert to platform remove callback returning void
2024-01-15Merge branch 'pci/controller/xilinx'Bjorn Helgaas
- Remove redundant dev_err(), since platform_get_irq() and platform_get_irq_byname() already log errors (Yang Li) - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() (Krzysztof Wilczyński) - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when irq_domain_add_linear() fails (Harshit Mogalapalli) * pci/controller/xilinx: PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain() PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq() PCI: xilinx-xdma: Remove redundant dev_err()
2024-01-15Merge branch 'pci/controller/vmd'Bjorn Helgaas
- Use ida_alloc() instead of deprecated ida_simple_get() (Christophe JAILLET) * pci/controller/vmd: PCI: vmd: Remove usage of the deprecated ida_simple_xx() API
2024-01-15Merge branch 'pci/controller/rcar'Bjorn Helgaas
- Replace of_device.h with explicit of.h include to untangle header usage (Rob Herring) - Add DT and driver support for optional miniPCIe 1.5v and 3.3v regulators on KingFisher (Wolfram Sang) * pci/controller/rcar: PCI: rcar-host: Add support for optional regulators dt-bindings: PCI: rcar-pci-host: Add optional regulators PCI: rcar-gen4: Replace of_device.h with explicit of.h include
2024-01-15Merge branch 'pci/controller/mediatek'Bjorn Helgaas
- Clear MSI interrupt status before handler to avoid missing MSIs that occur after the handler (qizhong cheng) - Update mediatek-gen3 translation window setup to handle MMIO space that is not a power of two in size (Jianjun Wang) * pci/controller/mediatek: PCI: mediatek-gen3: Fix translation window size calculation PCI: mediatek: Clear interrupt status before dispatching handler
2024-01-15Merge branch 'pci/controller/layerscape'Bjorn Helgaas
- Add suspend/resume support for Layerscape LS1043a, including software-managed PME_Turn_Off and transitions between L0, L2/L3_Ready Link states (Frank Li) * pci/controller/layerscape: PCI: layerscape: Add suspend/resume for ls1043a PCI: layerscape(ep): Rename pf_* as pf_lut_* PCI: layerscape: Add suspend/resume for ls1021a PCI: layerscape: Add function pointer for exit_from_l2()
2024-01-15Merge branch 'pci/controller/kirin'Bjorn Helgaas
- Use devm_kasprintf() to dynamically allocate clock names, removing need for an intermediate buffer (Christophe JAILLET) * pci/controller/kirin: PCI: kirin: Use devm_kasprintf() to dynamically allocate clock names
2024-01-15Merge branch 'pci/controller/keystone'Bjorn Helgaas
- Hold power management references to all PHYs while enabling them to avoid a race when one provides clocks to others (Siddharth Vadapalli) * pci/controller/keystone: PCI: keystone: Fix race condition when initializing PHYs
2024-01-15Merge branch 'pci/controller/dwc'Bjorn Helgaas
- Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to ARCH_SIFIVE (Conor Dooley) - Align iATU mapping for endpoint MSI-X (Niklas Cassel) - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro Shimoda) - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro Shimoda) - Rename struct dw_pcie_ep_ops.func_conf_select() to .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda) - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro Shimoda) - Cast iproc and rcar-gen4 of_device_get_match_data() results to uintptr_t to avoid clang "cast to smaller integer type" warnings (Justin Stitt, Yoshihiro Shimoda) * pci/controller/dwc: PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support PCI: dwc: Convert SOC_SIFIVE to ARCH_SIFIVE
2024-01-15Merge branch 'pci/controller/cadence'Bjorn Helgaas
- Add j721e DT and driver support for 'num-lanes' for devices that support x1, x2, or x4 Links (Matt Ranostay) - Add j721e DT compatible strings and driver support for j784s4 (Matt Ranostay) - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is specific to those TI SoC parts (Peter Robinson) * pci/controller/cadence: PCI: j721e: Make TI J721E depend on ARCH_K3 PCI: j721e: Add TI J784S4 PCIe configuration PCI: j721e: Add PCIe 4x lane selection support PCI: j721e: Add per platform maximum lane settings dt-bindings: PCI: ti,j721e-pci-*: Add j784s4-pci-* compatible strings dt-bindings: PCI: ti,j721e-pci-*: Add checks for num-lanes
2024-01-15Merge branch 'pci/controller/broadcom'Bjorn Helgaas
- Add DT property "brcm,clkreq-mode" and driver support for different CLKREQ# modes (Jim Quinlan) * pci/controller/broadcom: PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
2024-01-15Merge branch 'pci/virtualization'Bjorn Helgaas
- Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc) * pci/virtualization: PCI: Add ACS quirk for more Zhaoxin Root Ports
2024-01-15Merge branch 'pci/switchtec'Bjorn Helgaas
- Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm ioremapping in switchtec_pci_probe(). Previously the cleanup was done in stdev_release(), which used stale pointers if stdev->cdev happened to be open when the PCI device was removed (Daniel Stodden) * pci/switchtec: PCI: switchtec: Fix stdev_release() crash after surprise hot remove
2024-01-15Merge branch 'pci/enumeration-logging'Bjorn Helgaas
- Log device type (Root Port, Switch Port, etc) during enumeration (Bjorn Helgaas) - Log resource names (BAR 0, VF BAR 0, bridge window, etc) consistently instead of a mix of names and "reg 0x10" (Puranjay Mohan, Bjorn Helgaas) - Log bridges before devices below the bridges (Bjorn Helgaas) * pci/enumeration-logging: PCI: Log bridge info when first enumerating bridge PCI: Log bridge windows conditionally PCI: Supply bridge device, not secondary bus, to read window details PCI: Move pci_read_bridge_windows() below individual window accessors PCI: Use resource names in PCI log messages PCI: Update BAR # and window messages PCI: Log device type during enumeration
2024-01-15Merge branch 'pci/enumeration'Bjorn Helgaas
- Convert pci-host-common.c platform .remove() callback to .remove_new() returning 'void' since it's not useful to return error codes here (Uwe Kleine-König) - Log a message about updating AMD USB controller class code (so dwc3, not xhci, claims it) only when we actually change it (Guilherme G. Piccoli) - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI lpfc (Ilpo Järvinen) - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen) - Fix 64GT/s effective data rate calculation to use 1b/1b encoding rather than the 8b/10b or 128b/130b used by lower rates (Ilpo Järvinen) * pci/enumeration: PCI: Fix 64GT/s effective data rate calculation x86/pci: Clean up open-coded PCIBIOS return code mangling scsi: lpfc: Use PCI_HEADER_TYPE_MFD instead of literal powerpc/fsl-pci: Use PCI_HEADER_TYPE_MASK instead of literal x86/pci: Use PCI_HEADER_TYPE_* instead of literals PCI: Only override AMD USB controller if required PCI: host-generic: Convert to platform remove callback returning void
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2024-01-11PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream deviceJim Quinlan
The Broadcom STB/CM PCIe HW core, which is also used in RPi SOCs, must be deliberately set by the PCIe RC HW into one of three mutually exclusive modes: "safe" -- No CLKREQ# expected or required, refclk is always provided. This mode should work for all devices but is not be capable of any refclk power savings. "no-l1ss" -- CLKREQ# is expected to be driven by the downstream device for CPM and ASPM L0s and L1. Provides Clock Power Management, L0s, and L1, but cannot provide L1 substate (L1SS) power savings. If the downstream device connected to the RC is L1SS capable AND the OS enables L1SS, all PCIe traffic may abruptly halt, potentially hanging the system. "default" -- Bidirectional CLKREQ# between the RC and downstream device. Provides ASPM L0s, L1, and L1SS, but not compliant to provide Clock Power Management; specifically, may not be able to meet the T_CLRon max timing of 400ns as specified in "Dynamic Clock Control", section 3.2.5.2.2 of the PCIe Express Mini CEM 2.1 specification. This situation is atypical and should happen only with older devices. Previously, this driver always set the mode to "no-l1ss", as almost all STB/CM boards operate in this mode. But now there is interest in activating L1SS power savings from STB/CM customers, which requires "aspm" mode. In addition, a bug was filed for RPi4 CM platform because most devices did not work in "no-l1ss" mode. Note that the mode is specified by the DT property "brcm,clkreq-mode". If this property is omitted, then "default" mode is chosen. Note: Since L1 substates are now possible, a modification was made regarding an internal bus timeout: During long periods of the PCIe RC HW being in an L1SS sleep state, there may be a timeout on an internal bus access, even though there may not be any PCIe access involved. Such a timeout will cause a subsequent CPU abort. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217276 Link: https://lore.kernel.org/linux-pci/20231113185607.1756-3-james.quinlan@broadcom.com Tested-by: Cyril Brulebois <cyril@debamax.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-01-09PCI: mediatek-gen3: Fix translation window size calculationJianjun Wang
When using the fls() helper, the translation table should be a power of two; otherwise, the resulting value will not be correct. For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window size will be set to 0x2000000 instead of the expected size 0x3e00000. Fix the translation window by splitting the MMIO space into multiple tables if its size is not a power of two. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com Fixes: d3bf75b579b9 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192") Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
2024-01-09PCI: mediatek: Clear interrupt status before dispatching handlerqizhong cheng
We found a failure when using the iperf tool during WiFi performance testing, where some MSIs were received while clearing the interrupt status, and these MSIs cannot be serviced. The interrupt status can be cleared even if the MSI status remains pending. As such, given the edge-triggered interrupt type, its status should be cleared before being dispatched to the handler of the underling device. [kwilczynski: commit log, code comment wording] Link: https://lore.kernel.org/linux-pci/20231211094923.31967-1-jianjun.wang@mediatek.com Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com> Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> [bhelgaas: rewrap comment] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: <stable@vger.kernel.org>
2024-01-09PCI: keystone: Fix race condition when initializing PHYsSiddharth Vadapalli
The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
2024-01-08Merge tag 'x86-apic-2024-01-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Ingo Molnar: - Clean up 'struct apic': - Drop ::delivery_mode - Drop 'enum apic_delivery_modes' - Drop 'struct local_apic' - Fix comments * tag 'x86-apic-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Remove unfinished sentence from comment x86/apic: Drop struct local_apic x86/apic: Drop enum apic_delivery_modes x86/apic: Drop apic::delivery_mode
2024-01-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "CPU features: - Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye olde Thunder-X machines - Avoid mapping KPTI trampoline when it is not required - Make CPU capability API more robust during early initialisation Early idreg overrides: - Remove dependencies on core kernel helpers from the early command-line parsing logic in preparation for moving this code before the kernel is mapped FPsimd: - Restore kernel-mode fpsimd context lazily, allowing us to run fpsimd code sequences in the kernel with pre-emption enabled KBuild: - Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y - Makefile cleanups LPA2 prep: - Preparatory work for enabling the 'LPA2' extension, which will introduce 52-bit virtual and physical addressing even with 4KiB pages (including for KVM guests). Misc: - Remove dead code and fix a typo MM: - Pass NUMA node information for IRQ stack allocations Perf: - Add perf support for the Synopsys DesignWare PCIe PMU - Add support for event counting thresholds (FEAT_PMUv3_TH) introduced in Armv8.8 - Add support for i.MX8DXL SoCs to the IMX DDR PMU driver. - Minor PMU driver fixes and optimisations RIP VPIPT: - Remove what support we had for the obsolete VPIPT I-cache policy Selftests: - Improvements to the SVE and SME selftests Stacktrace: - Refactor kernel unwind logic so that it can used by BPF unwinding and, eventually, reliable backtracing Sysregs: - Update a bunch of register definitions based on the latest XML drop from Arm" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits) kselftest/arm64: Don't probe the current VL for unsupported vector types efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad arm64: properly install vmlinuz.efi arm64/sysreg: Add missing system instruction definitions for FGT arm64/sysreg: Add missing system register definitions for FGT arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1 arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1 arm64: memory: remove duplicated include arm: perf: Fix ARCH=arm build with GCC arm64: Align boot cpucap handling with system cpucap handling arm64: Cleanup system cpucap handling MAINTAINERS: add maintainers for DesignWare PCIe PMU driver drivers/perf: add DesignWare PCIe PMU driver PCI: Move pci_clear_and_set_dword() helper to PCI header PCI: Add Alibaba Vendor ID to linux/pci_ids.h docs: perf: Add description for Synopsys DesignWare PCIe PMU driver arm64: irq: set the correct node for shadow call stack Revert "perf/arm_dmc620: Remove duplicate format attribute #defines" arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD arm64: fpsimd: Preserve/restore kernel mode NEON at context switch ...
2024-01-08PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()Harshit Mogalapalli
Currently, if the function irq_domain_add_linear() fails to allocate a new IRQ domain and returns NULL, we would then still return a success from the xilinx_pl_dma_pcie_init_irq_domain() function regardless, as the PTR_ERR(NULL) would return a value of zero. This is not a desirable outcome. Thus, fix the incorrect error code and return the -ENOMEM error code if the irq_domain_add_linear() fails to allocate a new IRQ domain. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231030072757.3236546-1-harshit.m.mogalapalli@oracle.com Fixes: 8d786149d78c ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-01-06PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()Krzysztof Wilczyński
The error paths that follow calls to the devm_request_irq() functions within the xilinx_pl_dma_pcie_setup_irq() reference an uninitialized symbol each that also so happens to be incorrect. Thus, fix this omission and reference the correct variable when invoking a given dev_err() function following an error. This problem was found using smatch via the 0-DAY CI Kernel Test service: drivers/pci/controller/pcie-xilinx-dma-pl.c:638 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'. drivers/pci/controller/pcie-xilinx-dma-pl.c:645 xilinx_pl_dma_pcie_setup_irq() error: uninitialized symbol 'irq'. Fixes: 8d786149d78c ("PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver") Link: https://lore.kernel.org/oe-kbuild/202312120248.5DblxkBp-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202312120248.5DblxkBp-lkp@intel.com/ Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-01-06PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast errorYoshihiro Shimoda
When building with clang 18 with the -Werror compiler option enabled, the following error will be reported: drivers/pci/controller/dwc/pcie-rcar-gen4.c:439:15: error: cast to smaller integer type 'enum dw_pcie_device_mode' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] 439 | rcar->mode = (enum dw_pcie_device_mode)of_device_get_match_data(&rcar->pdev->dev); To fix this issue, cast the data the of_device_get_match_data() helper returns to uintptr_t rather than the dw_pcie_device_mode enum. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-7-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warningJustin Stitt
When building with clang 18, the following warning will be reported: drivers/pci/controller/pcie-iproc-platform.c:54:15: warning: cast to smaller integer type 'enum iproc_pcie_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] 55 | pcie->type = (enum iproc_pcie_type) of_device_get_match_data(dev); To fix this issue, cast the data the of_device_get_match_data() helper returns to uintptr_t rather than the iproc_pcie_type enum. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-6-yoshihiro.shimoda.uh@renesas.com Link: https://github.com/ClangBuiltLinux/linux/issues/1910 Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpersYoshihiro Shimoda
The current code calculated some dbi[2] registers' offset by calling dw_pcie_ep_get_dbi[2]_offset() in each function. To improve the code readability, add dw_pcie_ep_{read,write}_dbi[2} and some data-width related helpers. Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2024-01-06PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_opsYoshihiro Shimoda
Since the struct member .func_conf_select makes the intentions behind it difficult to ascertain from its name alone, rename it to .get_dbi_offset to make the intended usage more obvious. [kwilczynski: commmit log] Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-4-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2024-01-06PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_opsYoshihiro Shimoda
Since the name of the dw_pcie_ep_ops struct makes it obvious that it's for the PCIe Endpoint, rename the struct member .ep_init to .init. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Srikanth Thokala <srikanth.thokala@intel.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
2024-01-06PCI: dwc: Drop host prefix from struct dw_pcie_host_ops membersYoshihiro Shimoda
Since the name of the dw_pcie_host_ops struct makes it obvious that it's for the PCIe Host, drop the host prefix from the struct members. [kwilczynski: commit log] Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231220053829.1921187-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Lei Chuanhua <lchuanhua@maxlinear.com> Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2024-01-06PCI: j721e: Make TI J721E depend on ARCH_K3Peter Robinson
The J721E PCIe is hardware specific to TI SoC parts so add a dependency on that so it's available for those SoC parts and for compile testing but not necessarily everyone who enables the Cadence PCIe controller. Link: https://lore.kernel.org/linux-pci/20240104213910.1426843-1-pbrobinson@gmail.com Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-01-06PCI: j721e: Add TI J784S4 PCIe configurationMatt Ranostay
Add PCIe configuration for J784S4 SoC platform which has 4x lane support. Link: https://lore.kernel.org/linux-pci/20231128054402.2155183-6-s-vadapalli@ti.com Tested-by: Achal Verma <a-verma1@ti.com> Signed-off-by: Matt Ranostay <mranostay@ti.com> Signed-off-by: Achal Verma <a-verma1@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()") 0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL") https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-03Merge tag 'pci-v6.7-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fixes from Bjorn Helgaas: - Revert an ASPM patch that caused an unintended reboot when resuming after suspend (Bjorn Helgaas) - Orphan Cadence PCIe IP (Bjorn Helgaas) * tag 'pci-v6.7-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: MAINTAINERS: Orphan Cadence PCIe IP Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"
2024-01-02Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"Bjorn Helgaas
This reverts commit 08d0cc5f34265d1a1e3031f319f594bd1970976c. Michael reported that when attempting to resume from suspend to RAM on ASUS mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay with no output, followed by a reboot. Workarounds include: - Reverting 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") - Booting with "pcie_aspm=off" - Booting with "pcie_aspm.policy=performance" - "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm" before suspending - Connecting a USB flash drive Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org Fixes: 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()") Reported-by: Michael Schaller <michael@5challer.de> Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org>
2024-01-02PCI/AER: Use explicit register sizes for struct membersBjorn Helgaas
aer_irq() reads the AER Root Error Status and Error Source Identification (PCI_ERR_ROOT_STATUS and PCI_ERR_ROOT_ERR_SRC) registers directly into struct aer_err_source. Both registers are 32 bits, so declare the members explicitly as "u32" instead of "unsigned int". Similarly, aer_get_device_error_info() reads the AER Header Log (PCI_ERR_HEADER_LOG) registers, which are also 32 bits, into struct aer_header_log_regs. Declare those members as "u32" as well. No functional changes intended. Link: https://lore.kernel.org/r/20231206224231.732765-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-02PCI/AER: Decode Requester ID when no error info foundBjorn Helgaas
When a device with AER detects an error, it logs error information in its own AER Error Status registers. It may send an Error Message to the Root Port (RCEC in the case of an RCiEP), which logs the fact that an Error Message was received (Root Error Status) and the Requester ID of the message source (Error Source Identification). aer_print_port_info() prints the Requester ID from the Root Port Error Source in the usual Linux "bb:dd.f" format, but when find_source_device() finds no error details in the hierarchy below the Root Port, it printed the raw Requester ID without decoding it. Decode the Requester ID in the usual Linux format so it matches other messages. Sample message changes: - pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5 - pcieport 0000:00:1c.5: AER: can't find device of ID00e5 + pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5 + pcieport 0000:00:1c.5: AER: found no error details for 0000:00:1c.5 Link: https://lore.kernel.org/r/20231206224231.732765-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2024-01-02PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errorsBjorn Helgaas
The PCIe spec classifies errors as either "Correctable" or "Uncorrectable". Previously we printed these as "Corrected" or "Uncorrected". To avoid confusion, use the same terms as the spec. One confusing situation is when one agent detects an error, but another agent is responsible for recovery, e.g., by re-attempting the operation. The first agent may log a "correctable" error but it has not yet been corrected. The recovery agent must report an uncorrectable error if it is unable to recover. If we print the first agent's error as "Corrected", it gives the false impression that it has already been resolved. Sample message change: - pcieport 0000:00:1c.5: AER: Corrected error received: 0000:00:1c.5 + pcieport 0000:00:1c.5: AER: Correctable error received: 0000:00:1c.5 Link: https://lore.kernel.org/r/20231206224231.732765-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 22:51:32 +0000