| Age | Commit message (Collapse) | Author |
|---|
|
Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Clear 64-bit flag for host bridge windows below 4GB to fix a resource
allocation regression added in -rc1 (Punit Agrawal)
- Fix tegra194 MCFG quirk build regressions added in -rc1 (Jon Hunter)
- Avoid secondary bus resets on TI KeyStone C667X devices (Antti
Järvinen)
- Avoid secondary bus resets on some NVIDIA GPUs (Shanker Donthineni)
- Work around FLR erratum on Huawei Intelligent NIC VF (Chiqijun)
- Avoid broken ATS on AMD Navi14 GPU (Evan Quan)
- Trust Broadcom BCM57414 NIC to isolate functions even though it
doesn't advertise ACS support (Sriharsha Basavapatna)
- Work around AMD RS690 BIOSes that don't configure DMA above 4GB
(Mikel Rychliski)
- Fix panic during PIO transfer on Aardvark controller (Pali Rohár)
* tag 'pci-v5.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: aardvark: Fix kernel panic during PIO transfer
PCI: Add AMD RS690 quirk to enable 64-bit DMA
PCI: Add ACS quirk for Broadcom BCM57414 NIC
PCI: Mark AMD Navi14 GPU ATS as broken
PCI: Work around Huawei Intelligent NIC VF FLR erratum
PCI: Mark some NVIDIA GPUs to avoid bus reset
PCI: Mark TI C667X to avoid bus reset
PCI: tegra194: Fix MCFG quirk build regressions
PCI: of: Clear 64-bit flag for non-prefetchable memory below 4GB
|
|
Trying to start a new PIO transfer by writing value 0 in PIO_START register
when previous transfer has not yet completed (which is indicated by value 1
in PIO_START) causes an External Abort on CPU, which results in kernel
panic:
SError Interrupt on CPU0, code 0xbf000002 -- SError
Kernel panic - not syncing: Asynchronous SError Interrupt
To prevent kernel panic, it is required to reject a new PIO transfer when
previous one has not finished yet.
If previous PIO transfer is not finished yet, the kernel may issue a new
PIO request only if the previous PIO transfer timed out.
In the past the root cause of this issue was incorrectly identified (as it
often happens during link retraining or after link down event) and special
hack was implemented in Trusted Firmware to catch all SError events in EL3,
to ignore errors with code 0xbf000002 and not forwarding any other errors
to kernel and instead throw panic from EL3 Trusted Firmware handler.
Links to discussion and patches about this issue:
https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=3c7dcdac5c50
https://lore.kernel.org/linux-pci/20190316161243.29517-1-repk@triplefau.lt/
https://lore.kernel.org/linux-pci/971be151d24312cc533989a64bd454b4@www.loen.fr/
https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/1541
But the real cause was the fact that during link retraining or after link
down event the PIO transfer may take longer time, up to the 1.44s until it
times out. This increased probability that a new PIO transfer would be
issued by kernel while previous one has not finished yet.
After applying this change into the kernel, it is possible to revert the
mentioned TF-A hack and SError events do not have to be caught in TF-A EL3.
Link: https://lore.kernel.org/r/20210608203655.31228-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Cc: stable@vger.kernel.org # 7fbcb5da811b ("PCI: aardvark: Don't rely on jiffies while holding spinlock")
|
|
The Broadcom BCM57414 NIC may be a multi-function device. While it does
not advertise an ACS capability, peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.
Add an ACS quirk for this device so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00.
Further debugging shows broken ATS is related.
Disable ATS on this part. Similar issues on other devices:
a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms")
45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken")
5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Cc: stable@vger.kernel.org
|
|
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum
time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the
FLR to complete. It assumes the FLR is complete when a config read returns
valid data.
When we do an FLR on several Huawei Intelligent NIC VFs at the same time,
firmware on the NIC processes them serially. The VF may respond to config
reads before the firmware has completed its reset processing. If we bind a
driver to the VF (e.g., by assigning the VF to a virtual machine) in the
interval between the successful config read and completion of the firmware
reset processing, the NIC VF driver may fail to load.
Prevent this driver failure by waiting for the NIC firmware to complete its
reset processing. Not all NIC firmware supports this feature.
[bhelgaas: commit log]
Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr
Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com
Signed-off-by: Chiqijun <chiqijun@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
|
|
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the
device inoperable for the current system boot. It requires a system
hard-reboot to get the GPU device back to normal operating condition
post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the
issue.
This issue will be fixed in the next generation of hardware.
Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
Cc: stable@vger.kernel.org
|
|
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS
automatically disables LTSSM when Secondary Bus Reset is received and
device stops working. Prevent bus reset for these devices. With this
change, the device can be assigned to VMs with VFIO, but it will leak state
between VMs.
Reference: https://e2e.ti.com/support/processors/f/791/t/954382
Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com
Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Cc: stable@vger.kernel.org
|
|
7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
caused a few build regressions:
- 7f100744749e removed the Makefile rule for CONFIG_PCIE_TEGRA194, so
pcie-tegra.c can no longer be built as a module. Restore that rule.
- 7f100744749e added "#ifdef CONFIG_PCIE_TEGRA194" around the native
driver, but that's only set when the driver is built-in (for a module,
CONFIG_PCIE_TEGRA194_MODULE is defined).
The ACPI quirk is completely independent of the rest of the native
driver, so move the quirk to its own file and remove the #ifdef in the
native driver.
- 7f100744749e added symbols that are always defined but used only when
CONFIG_PCIEASPM, which causes warnings when CONFIG_PCIEASPM is not set:
drivers/pci/controller/dwc/pcie-tegra194.c:259:18: warning: ‘event_cntr_data_offset’ defined but not used [-Wunused-const-variable=]
drivers/pci/controller/dwc/pcie-tegra194.c:250:18: warning: ‘event_cntr_ctrl_offset’ defined but not used [-Wunused-const-variable=]
drivers/pci/controller/dwc/pcie-tegra194.c:243:27: warning: ‘pcie_gen_freq’ defined but not used [-Wunused-const-variable=]
Fixes: 7f100744749e ("PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata")
Link: https://lore.kernel.org/r/20210610064134.336781-1-jonathanh@nvidia.com
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
|
|
Alexandru and Qu reported this resource allocation failure on ROCKPro64 v2
and ROCK Pi 4B, both based on the RK3399:
pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0: BAR 14: no space for [mem size 0x00100000]
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
"BAR 14" is the PCI bridge's 32-bit non-prefetchable window, and our PCI
allocation code isn't smart enough to allocate it in a host bridge window
marked as 64-bit, even though this should work fine.
A DT host bridge description includes the windows from the CPU address
space to the PCI bus space. On a few architectures (microblaze, powerpc,
sparc), the DT may also describe PCI devices themselves, including their
BARs.
Before 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for
64-bit memory addresses"), of_bus_pci_get_flags() ignored the fact that
some DT addresses described 64-bit windows and BARs. That was a problem
because the virtio virtual NIC has a 32-bit BAR and a 64-bit BAR, and the
driver couldn't distinguish them.
9d57e61bf723 set IORESOURCE_MEM_64 for those 64-bit DT ranges, which fixed
the virtio driver. But it also set IORESOURCE_MEM_64 for host bridge
windows, which exposed the fact that the PCI allocator isn't smart enough
to put 32-bit resources in those 64-bit windows.
Clear IORESOURCE_MEM_64 from host bridge windows since we don't need that
information.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Fixes: 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
Link: https://lore.kernel.org/r/20210614230457.752811-1-punitagrawal@gmail.com
Reported-at: https://lore.kernel.org/lkml/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com/
Reported-at: https://lore.kernel.org/lkml/YMyTUv7Jsd89PGci@m4/T/#u
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-by: Qu Wenruo <wqu@suse.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Domenico Andreoli <domenico.andreoli@linux.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Since commit 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare
its reliance on MSI domains"), platforms that rely on the "msi-map"
device-tree property don't get MSIs anymore.
On the Arm Fast Model for example [1], the host bridge doesn't have a
"msi-parent" property since it doesn't itself generate MSIs, and so doesn't
get a MSI domain. It has an "msi-map" property instead to describe MSI
controllers of child devices. As a result, due to the new msi_domain check
in pci_register_host_bridge(), the whole bus gets PCI_BUS_FLAGS_NO_MSI.
Check whether the root complex has an "msi-map" property before giving
up on MSIs.
[1] arch/arm64/boot/dts/arm/fvp-base-revc.dts
Fixes: 9ec37efb8783 ("PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains")
Link: https://lore.kernel.org/r/20210510173129.750496-1-jean-philippe@linaro.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
|
|
This helps converting PCI drivers sysfs attributes to static.
Analogous to' commit b71b283e3d6d ("USB: add support for dev_groups to
struct usb_driver")'
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512142648.666476-8-andrey.grodzovsky@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- add support for system call stack randomization
- handle stale PCI deconfiguration events
- couple of defconfig updates
- some fixes and cleanups
* tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
s390/entry: add support for syscall stack randomization
s390/configs: change CONFIG_VIRTIO_CONSOLE to "m"
s390/cio: remove invalid condition on IO_SCH_UNREG
s390/cpumf: remove call to perf_event_update_userpage
s390/cpumf: move counter set size calculation to common place
s390/cpumf: beautify if-then-else indentation
s390/configs: enable CONFIG_PCI_IOV
s390/pci: handle stale deconfiguration events
s390/pci: rename zpci_configure_device()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Release OF node when pci_scan_device() fails (Dmitry Baryshkov)
- Add pci_disable_parity() (Bjorn Helgaas)
- Disable Mellanox Tavor parity reporting (Heiner Kallweit)
- Disable N2100 r8169 parity reporting (Heiner Kallweit)
- Fix RCiEP device to RCEC association (Qiuxu Zhuo)
- Convert sysfs "config", "rom", "reset", "label", "index",
"acpi_index" to static attributes to help fix races in device
enumeration (Krzysztof Wilczyński)
- Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof
Wilczyński)
- Use sysfs_emit() in "show" functions (Krzysztof Wilczyński)
- Remove unused alloc_pci_root_info() return value (Krzysztof
Wilczyński)
PCI device hotplug:
- Fix acpiphp reference count leak (Feilong Lin)
Power management:
- Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki)
- Fix runtime PM imbalance (Dinghao Liu)
Virtualization:
- Increase delay after FLR to work around Intel DC P4510 NVMe erratum
(Raphael Norwitz)
MSI:
- Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier)
- For rcar, xilinx, use controller address as MSI doorbell (Marc
Zyngier)
- Remove unused hv msi_controller struct (Marc Zyngier)
- Remove unused PCI core msi_controller support (Marc Zyngier)
- Remove struct msi_controller altogether (Marc Zyngier)
- Remove unused default_teardown_msi_irqs() (Marc Zyngier)
- Let host bridges declare their reliance on MSI domains (Marc
Zyngier)
- Make pci_host_common_probe() declare its reliance on MSI domains
(Marc Zyngier)
- Advertise mediatek lack of built-in MSI handling (Thomas Gleixner)
- Document ways of ending up with NO_MSI (Marc Zyngier)
- Refactor HT advertising of NO_MSI flag (Marc Zyngier)
VPD:
- Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner
Kallweit)
- Remove sysfs VPD size checking dead code (Heiner Kallweit)
- Convert VPF sysfs file to static attribute (Heiner Kallweit)
- Remove unnecessary pci_set_vpd_size() (Heiner Kallweit)
- Tone down "missing VPD" message (Heiner Kallweit)
Endpoint framework:
- Fix NULL pointer dereference when epc_features not implemented
(Shradha Todi)
- Add missing destroy_workqueue() in endpoint test (Yang Yingliang)
Amazon Annapurna Labs PCIe controller driver:
- Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann)
- Fix "no symbols" warnings when compile testing with
CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)
APM X-Gene PCIe controller driver:
- Fix cfg resource mapping regression (Dejin Zheng)
Broadcom iProc PCIe controller driver:
- Return zero for success of iproc_msi_irq_domain_alloc() (Pali
Rohár)
Broadcom STB PCIe controller driver:
- Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim
Quinlan)
- Fix use of BCM7216 reset controller (Jim Quinlan)
- Use reset/rearm for Broadcom STB pulse reset instead of
deassert/assert (Jim Quinlan)
- Fix brcm_pcie_probe() error return for unsupported revision (Wei
Yongjun)
Cavium ThunderX PCIe controller driver:
- Fix compile testing (Arnd Bergmann)
- Fix "no symbols" warnings when compile testing with
CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)
Freescale Layerscape PCIe controller driver:
- Fix ls_pcie_ep_probe() syntax error (comma for semicolon)
(Krzysztof Wilczyński)
- Remove layerscape-gen4 dependencies on OF and ARM64, add dependency
on ARCH_LAYERSCAPE (Geert Uytterhoeven)
HiSilicon HIP PCIe controller driver:
- Remove obsolete HiSilicon PCIe DT description (Dongdong Liu)
Intel Gateway PCIe controller driver:
- Remove unused pcie_app_rd() (Jiapeng Chong)
Intel VMD host bridge driver:
- Program IRTE with Requester ID of VMD endpoint, not child device
(Jon Derrick)
- Disable VMD MSI-X remapping when possible so children can use more
MSI-X vectors (Jon Derrick)
MediaTek PCIe controller driver:
- Configure FC and FTS for functions other than 0 (Ryder Lee)
- Add YAML schema for MediaTek (Jianjun Wang)
- Export pci_pio_to_address() for module use (Jianjun Wang)
- Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
- Add MediaTek MT8192 INTx support (Jianjun Wang)
- Add MediaTek MT8192 MSI support (Jianjun Wang)
- Add MediaTek MT8192 system power management support (Jianjun Wang)
- Add missing MODULE_DEVICE_TABLE (Qiheng Lin)
Microchip PolarFlare PCIe controller driver:
- Make several symbols static (Wei Yongjun)
NVIDIA Tegra PCIe controller driver:
- Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar)
- Make several symbols const (Rikard Falkeborn)
- Fix Kconfig host/endpoint typo (Wesley Sheng)
SiFive FU740 PCIe controller driver:
- Add pcie_aux clock to prci driver (Greentime Hu)
- Use reset-simple in prci driver for PCIe (Greentime Hu)
- Add SiFive FU740 PCIe host controller driver and DT binding (Paul
Walmsley, Greentime Hu)
Synopsys DesignWare PCIe controller driver:
- Move MSI Receiver init to dw_pcie_host_init() so it is
re-initialized along with the RC in resume (Jisheng Zhang)
- Move iATU detection earlier to fix regression (Hou Zhiqiang)
TI J721E PCIe driver:
- Add DT binding and TI j721e support for refclk to PCIe connector
(Kishon Vijay Abraham I)
- Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon
Vijay Abraham I)
TI Keystone PCIe controller driver:
- Use generic config accessors for TI AM65x (K3) to fix regression
(Kishon Vijay Abraham I)
Xilinx NWL PCIe controller driver:
- Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar
Gogada)
- Add optional "dma-coherent" DT property (Bharat Kumar Gogada)
Miscellaneous:
- Fix kernel-doc warnings (Krzysztof Wilczyński)
- Remove unused MicroGate SyncLink device IDs (Jiri Slaby)
- Remove redundant dev_err() for devm_ioremap_resource() failure
(Chen Hui)
- Remove redundant initialization (Colin Ian King)
- Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
Wilczyński)"
* tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits)
riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
PCI: fu740: Add SiFive FU740 PCIe host controller driver
dt-bindings: PCI: Add SiFive FU740 PCIe host controller
MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver
clk: sifive: Use reset-simple in prci driver for PCIe driver
clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
PCI: brcmstb: Use reset/rearm instead of deassert/assert
ata: ahci_brcm: Fix use of BCM7216 reset controller
reset: add missing empty function reset_control_rearm()
PCI: Allow VPD access for QLogic ISP2722
PCI/VPD: Add helper pci_get_func0_dev()
PCI/VPD: Remove pci_vpd_find_tag() SRDT handling
PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument
PCI/VPD: Change pci_vpd_init() return type to void
PCI/VPD: Make missing VPD message less alarming
PCI/VPD: Remove pci_set_vpd_size()
x86/PCI: Remove unused alloc_pci_root_info() return value
MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
PCI: mediatek-gen3: Add system PM support
PCI: mediatek-gen3: Add MSI support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New drivers/devices:
- Support for QCOM SM8150 GPI DMA
Updates:
- Big pile of idxd updates including support for performance
monitoring
- Support in dw-edma for interleaved dma
- Support for synchronize() in Xilinx driver"
* tag 'dmaengine-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (42 commits)
dmaengine: idxd: Enable IDXD performance monitor support
dmaengine: idxd: Add IDXD performance monitor support
dmaengine: idxd: remove MSIX masking for interrupt handlers
dmaengine: idxd: device cmd should use dedicated lock
dmaengine: idxd: support reporting of halt interrupt
dmaengine: idxd: enable SVA feature for IOMMU
dmaengine: idxd: convert sprintf() to sysfs_emit() for all usages
dmaengine: idxd: add interrupt handle request and release support
dmaengine: idxd: add support for readonly config mode
dmaengine: idxd: add percpu_ref to descriptor submission path
dmaengine: idxd: remove detection of device type
dmaengine: idxd: iax bus removal
dmaengine: idxd: fix cdev setup and free device lifetime issues
dmaengine: idxd: fix group conf_dev lifetime
dmaengine: idxd: fix engine conf_dev lifetime
dmaengine: idxd: fix wq conf_dev 'struct device' lifetime
dmaengine: idxd: fix idxd conf_dev 'struct device' lifetime
dmaengine: idxd: use ida for device instance enumeration
dmaengine: idxd: removal of pcim managed mmio mapping
dmaengine: idxd: cleanup pci interrupt vector allocation management
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
|
|
- Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar)
* pci/tegra:
PCI: tegra: Add Tegra194 MCFG quirks for ECAM errata
|
|
- Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan)
- Fix use of BCM7216 reset controller (Jim Quinlan)
- Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert
(Jim Quinlan)
* pci/brcmstb:
PCI: brcmstb: Use reset/rearm instead of deassert/assert
ata: ahci_brcm: Fix use of BCM7216 reset controller
reset: add missing empty function reset_control_rearm()
|
|
- Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on
ARCH_LAYERSCAPE (Geert Uytterhoeven)
- Remove obsolete HiSilicon PCIe DT description (Dongdong Liu)
* remotes/lorenzo/pci/misc:
dt-bindings: PCI: hisi: Delete the obsolete HiSilicon PCIe file
PCI: mobiveil: Improve PCIE_LAYERSCAPE_GEN4 dependencies
|
|
- Convert tegra to MSI domains (Marc Zyngier)
- Use rcar controller address as MSI doorbell instead of allocating a page
(Marc Zyngier)
- Convert rcar to MSI domains (Marc Zyngier)
- Use xilinx port structure as MSI doorbell instead of allocating a page
(Marc Zyngier)
- Convert xilinx to MSI domains (Marc Zyngier)
- Remove unused Hyper-V msi_controller structure (Marc Zyngier)
- Remove unused PCI core msi_controller support (Marc Zyngier)
- Remove struct msi_controller (Marc Zyngier)
- Remove unused default_teardown_msi_irqs() (Marc Zyngier)
- Let host bridges declare their reliance on MSI domains (Marc Zyngier)
- Make pci_host_common_probe() declare its reliance on MSI domains (Marc
Zyngier)
- Advertise mediatek lack of built-in MSI handling (Thomas Gleixner)
- Document ways of ending up with NO_MSI (Marc Zyngier)
- Refactor HT advertising of NO_MSI flag (Marc Zyngier)
* remotes/lorenzo/pci/msi:
PCI: Refactor HT advertising of NO_MSI flag
PCI/MSI: Document the various ways of ending up with NO_MSI
PCI: mediatek: Advertise lack of built-in MSI handling
PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains
PCI/MSI: Let PCI host bridges declare their reliance on MSI domains
PCI/MSI: Kill default_teardown_msi_irqs()
PCI/MSI: Kill msi_controller structure
PCI/MSI: Drop use of msi_controller from core code
PCI: hv: Drop msi_controller structure
PCI: xilinx: Convert to MSI domains
PCI: xilinx: Don't allocate extra memory for the MSI capture address
PCI: rcar: Convert to MSI domains
PCI: rcar: Don't allocate extra memory for the MSI capture address
PCI: tegra: Convert to MSI domains
|
|
- Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada)
- Add optional "dma-coherent" DT property (Bharat Kumar Gogada)
* remotes/lorenzo/pci/xilinx:
PCI: xilinx-nwl: Add optional "dma-coherent" property
PCI: xilinx-nwl: Enable coherent PCIe DMA traffic using CCI
|
|
- Fix cfg resource mapping regression (Dejin Zheng)
* remotes/lorenzo/pci/xgene:
PCI: xgene: Fix cfg resource mapping
|
|
- Program IRTE with Requester ID of VMD endpoint, not child device (Jon
Derrick)
- Disable VMD MSI-X remapping when possible so children can use more MSI-X
vectors (Jon Derrick)
* remotes/lorenzo/pci/vmd:
PCI: vmd: Disable MSI-X remapping when possible
iommu/vt-d: Use Real PCI DMA device for IRTE
|
|
- Make several tegra symbols const (Rikard Falkeborn)
- Fix tegra Kconfig host/endpoint typo (Wesley Sheng)
- Fix runtime PM imbalance (Dinghao Liu)
* remotes/lorenzo/pci/tegra:
PCI: tegra: Fix runtime PM imbalance in pex_ep_event_pex_rst_deassert()
PCI: tegra: Fix typo for PCIe endpoint mode in Tegra194
PCI: tegra: Constify static structs
|
|
- sifive: Add pcie_aux clock to prci driver (Greentime Hu)
- sifive: Use reset-simple in prci driver for PCIe (Greentime Hu)
- Add SiFive FU740 PCIe host controller driver and DT binding (Paul
Walmsley, Greentime Hu)
* remotes/lorenzo/pci/risc-v:
riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
PCI: fu740: Add SiFive FU740 PCIe host controller driver
dt-bindings: PCI: Add SiFive FU740 PCIe host controller
MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver
clk: sifive: Use reset-simple in prci driver for PCIe driver
clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
|
|
- Make several microchip symbols static (Wei Yongjun)
- Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
Wilczyński)
* remotes/lorenzo/pci/microchip:
PCI: microchip: Remove dev_err() when handing an error from platform_get_irq()
PCI: microchip: Make some symbols static
|
|
- Configure FC and FTS for functions other than 0 (Ryder Lee)
- Add missing MODULE_DEVICE_TABLE (Qiheng Lin)
- Add YAML schema for MediaTek (Jianjun Wang)
- Export pci_pio_to_address() for module use (Jianjun Wang)
- Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
- Add MediaTek MT8192 INTx support (Jianjun Wang)
- Add MediaTek MT8192 MSI support (Jianjun Wang)
- Add MediaTek MT8192 system power management support (Jianjun Wang)
* remotes/lorenzo/pci/mediatek:
MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
PCI: mediatek-gen3: Add system PM support
PCI: mediatek-gen3: Add MSI support
PCI: mediatek-gen3: Add INTx support
PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192
PCI: Export pci_pio_to_address() for module use
dt-bindings: PCI: mediatek-gen3: Add YAML schema
PCI: mediatek: Add missing MODULE_DEVICE_TABLE
PCI: mediatek: Configure FC and FTS for functions other than 0
|
|
- Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof
Wilczyński)
* remotes/lorenzo/pci/layerscape:
PCI: layerscape: Correct syntax by changing comma to semicolon
|
|
- Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár)
* remotes/lorenzo/pci/iproc:
PCI: iproc: Fix return value of iproc_msi_irq_domain_alloc()
|
|
- Fix NULL pointer dereference when epc_features not implemented (Shradha
Todi)
- Remove redundant initialization (Colin Ian King)
- Add missing destroy_workqueue() in endpoint test (Yang Yingliang)
* remotes/lorenzo/pci/endpoint:
PCI: endpoint: Fix missing destroy_workqueue()
PCI: endpoint: Remove redundant initialization of pointer dev
PCI: endpoint: Fix NULL pointer dereference for ->get_features()
|
|
- Use generic config accessors for TI AM65x (K3) to fix regression (Kishon
Vijay Abraham I)
- Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized
along with the RC in resume (Jisheng Zhang)
- Remove unused pcie_app_rd() (Jiapeng Chong)
- Move iATU detection earlier to fix regression (Hou Zhiqiang)
* remotes/lorenzo/pci/dwc:
PCI: dwc: Move iATU detection earlier
PCI: dwc/intel-gw: Remove unused function
PCI: dwc: Move dw_pcie_msi_init() to dw_pcie_setup_rc()
PCI: keystone: Let AM65 use the pci_ops defined in pcie-designware-host.c
|
|
- Add DT binding and TI j721e support for refclk to PCIe connector (Kishon
Vijay Abraham I)
- Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: j721e: Add support to provide refclk to PCIe connector
dt-bindings: PCI: ti,j721e: Add endpoint mode dt-bindings for TI's AM64 SoC
dt-bindings: PCI: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC
dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector
|
|
- Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun)
* remotes/lorenzo/pci/brcmstb:
PCI: brcmstb: Fix error return code in brcm_pcie_probe()
|
|
- Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui)
* remotes/lorenzo/pci/altera-msi:
PCI: altera-msi: Remove redundant dev_err call in altera_msi_probe()
|
|
- Fix compile testing of al driver without CONFIG_PCI_ECAM (Arnd Bergmann)
- Fix compile testing of thunder drivers (Arnd Bergmann)
- Fix "no symbols" warnings when compile testing al, thunder driver with
CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)
- Remove unused MicroGate SyncLink device IDs (Jiri Slaby)
- Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński)
* pci/misc:
x86/PCI: Remove unused alloc_pci_root_info() return value
PCI: Remove MicroGate SyncLink device IDs
PCI: Avoid building empty drivers
PCI: thunder: Fix compile testing
PCI: al: Select CONFIG_PCI_ECAM
|
|
- Increase delay after FLR to work around Intel DC P4510 NVMe erratum
(Raphael Norwitz)
* pci/virtualization:
PCI: Delay after FLR of Intel DC P4510 NVMe
|
|
- Fix kernel-doc warnings (Krzysztof Wilczyński)
* pci/kernel-doc:
PCI: Fix kernel-doc errors
|
|
- Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to
static attributes to fix races in device enumeration (Krzysztof
Wilczyński)
- Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof
Wilczyński)
- Use sysfs_emit() in "show" functions (Krzysztof Wilczyński)
* pci/sysfs:
PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PCI/sysfs: Rearrange smbios_attr_group and acpi_attr_group
PCI/sysfs: Tidy SMBIOS & ACPI label attributes
PCI/sysfs: Convert "index", "acpi_index", "label" to static attributes
PCI/sysfs: Define SMBIOS label attributes with DEVICE_ATTR*()
PCI/sysfs: Define ACPI label attributes with DEVICE_ATTR*()
PCI/sysfs: Rename device_has_dsm() to device_has_acpi_name()
PCI/sysfs: Convert "vpd" to static attribute
PCI/sysfs: Rename "vpd" attribute accessors
PCI/sysfs: Convert "reset" to static attribute
PCI/sysfs: Convert "rom" to static attribute
PCI/sysfs: Convert "config" to static attribute
|
|
- Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit)
- Remove sysfs VPD size checking dead code (Heiner Kallweit)
- Convert VPF sysfs file to static attribute (Heiner Kallweit)
- Remove unnecessary pci_set_vpd_size() (Heiner Kallweit)
- Tone down "missing VPD" message (Heiner Kallweit)
* pci/vpd:
PCI: Allow VPD access for QLogic ISP2722
PCI/VPD: Add helper pci_get_func0_dev()
PCI/VPD: Remove pci_vpd_find_tag() SRDT handling
PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument
PCI/VPD: Change pci_vpd_init() return type to void
PCI/VPD: Make missing VPD message less alarming
PCI/VPD: Remove pci_set_vpd_size()
PCI/VPD: Remove sysfs accessor size checking dead code
PCI/VPD: Remove obsolete Broadcom NIC quirk
|
|
- Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki)
* pci/pm:
PCI/ACPI: Fix acpi_pci_set_power_state() debug message
|
|
- Fix acpiphp reference count leak (Feilong Lin)
* pci/hotplug:
PCI: acpiphp: Fix whitespace issue
PCI: shpchp: Remove unused shpc_writeb()
PCI: cpqphp: Use DEFINE_SPINLOCK() for int15_lock
ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
|
|
- Fix RCiEP device to RCEC association (Qiuxu Zhuo)
* pci/error:
PCI/RCEC: Fix RCiEP device to RCEC association
|
|
Add driver for the SiFive FU740 PCIe host controller.
This controller is based on the DesignWare PCIe core.
Co-developed-by: Henry Styles <hes@sifive.com>
Co-developed-by: Erik Danie <erik.danie@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20210504105940.100004-6-greentime.hu@sifive.com
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Henry Styles <hes@sifive.com>
Signed-off-by: Erik Danie <erik.danie@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
The Broadcom STB PCIe RC uses a reset control "rescal" for certain chips.
The "rescal" implements a "pulse reset" so using assert/deassert is wrong
for this device. Instead, we use reset/rearm. We need to use rearm so
that we can reset it after a suspend/resume cycle; w/o using "rearm", the
"rescal" device will only ever fire once.
Of course for suspend/resume to work we also need to put the reset/rearm
calls in the suspend and resume routines.
Fixes: 740d6c3708a9 ("PCI: brcmstb: Add control of rescal reset")
Link: https://lore.kernel.org/r/20210430152156.21162-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722") disabled access
to VPD of the ISP2722-based 16/32Gb Fibre Channel to PCIe Adapter because
reading past the end of the VPD caused NMIs.
104daa71b396 ("PCI: Determine actual VPD size on first access") limits
reads to the actual size of VPD, which should prevent these NMIs.
104daa71b396 was merged *before* 0d5370d1d852, but we think the testing
that prompted 0d5370d1d852 ("PCI: Prevent VPD access for QLogic ISP2722")
was done with a kernel that lacked 104daa71b396. See [1, 2].
Remove the quirk added by 0d5370d1d852 ("PCI: Prevent VPD access for QLogic
ISP2722") so customers can read the HBA VPD.
[1] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2012161641230.28924@irv1user01.caveonetworks.com/
[2] https://lore.kernel.org/linux-pci/alpine.LRH.2.21.9999.2104071535110.13940@irv1user01.caveonetworks.com/
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20210409215153.16569-2-aeasi@marvell.com
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.6+
|
|
Factor out the "get function 0" logic into pci_get_func0_dev().
[bhelgaas: keep PCI_DEVFN(PCI_SLOT()) instead of exposing implementation
details, commit log]
Link: https://lore.kernel.org/r/75d1f619-8a35-690d-8fc8-e851264a4bbb@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Only SRDT tag is the end tag, and no caller is interested in it. This
allows to remove all SRDT tag handling.
Link: https://lore.kernel.org/r/3f63f06f-734f-8fff-9518-27fe1faf903d@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
All callers pass 0 as offset. Therefore remove the parameter and use a
fixed offset 0 in pci_vpd_find_tag().
Link: https://lore.kernel.org/r/f62e6e19-5423-2ead-b2bd-62844b23ef8f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
pci_init_capabilities() is the only caller and doesn't use the return
value. So let's change the return type to void.
Link: https://lore.kernel.org/r/663ec440-8375-1459-ddb4-98ea76e75917@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Realtek RTL8169/8168/8125 NIC families indicate VPD capability and an
optional VPD EEPROM can be connected via I2C/SPI. However I haven't seen
any card or system with such a VPD EEPROM yet. The missing EEPROM causes
the following warning whenever e.g. lscpi -vv is executed.
invalid short VPD tag 00 at offset 01
The warning confuses users, and I think we should handle the situation more
gently. Therefore, if first VPD byte is read as 0x00, assume a missing
optional VPD PROM and replace the warning with a more descriptive message
at info level.
[bhelgaas: fix pre-existing whitespace]
Link: https://lore.kernel.org/r/ccbc11f1-4dbb-e2c8-d0ea-559e06d4c340@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
