summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2023-10-28Merge branch 'pci/controller/cadence'Bjorn Helgaas
- Drop unused struct cdns_plat_pcie.is_rc member (Li Chen) * pci/controller/cadence: PCI: cadence: Drop unused member from struct cdns_plat_pcie
2023-10-28Merge branch 'pci/controller/aspm'Bjorn Helgaas
- Add a dwc .host_post_init() callback for configuration after downstream devices are scanned (Manivannan Sadhasivam) - Enable ASPM for devices below qcom 1.9.0 host controllers (Manivannan Sadhasivam) * pci/controller/aspm: PCI: qcom: Enable ASPM for platforms supporting 1.9.0 ops PCI: dwc: Add host_post_init() callback
2023-10-28Merge branch 'pci/vga'Bjorn Helgaas
- Add pci_is_vga() helper, which checks for both PCI_CLASS_DISPLAY_VGA and PCI_CLASS_NOT_DEFINED_VGA (which catches ancient devices built before Class Codes were defined) (Sui Jingfeng) - Use the new pci_is_vga() to identify devices for the VGA arbiter, the sysfs "boot_vga" attribute, and the virtio and qxl drivers (SUi Jingfeng) * pci/vga: drm/qxl: Use pci_is_vga() to identify VGA devices drm/virtio: Use pci_is_vga() to identify VGA devices PCI/sysfs: Enable 'boot_vga' attribute via pci_is_vga() PCI/VGA: Select VGA devices earlier PCI/VGA: Use pci_is_vga() to identify VGA devices PCI: Add pci_is_vga() helper
2023-10-28Merge branch 'pci/reset'Bjorn Helgaas
- Lengthen reset delay for VideoPropulsion Torrent QN16e card, which seems to require longer delay than spec requires (Lukas Wunner) * pci/reset: PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
2023-10-28Merge branch 'pci/pm'Bjorn Helgaas
- Protect driver's D3cold preference from being overwritten by user space via sysfs (Lukas Wunner) - Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 to fix wakeup by USB4-attached devices (Mario Limonciello) * pci/pm: x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4 PCI/sysfs: Protect driver's D3cold preference from user space
2023-10-28Merge branch 'pci/p2pdma'Bjorn Helgaas
- Move struct dev_pagemap (a flexible structure) to end of struct pci_p2pdma_pagemap to avoid overwriting things after dev_pagemap (Gustavo A. R. Silva) * pci/p2pdma: PCI/P2PDMA: Remove redundant goto PCI/P2PDMA: Fix undefined behavior bug in struct pci_p2pdma_pagemap
2023-10-28Merge branch 'pci/hotplug'Bjorn Helgaas
- Add driver for Ampere Altra Attention Indicators (D Scott Phillips) * pci/hotplug: PCI: hotplug: Add Ampere Altra Attention Indicator extension driver PCI: acpiphp: Allow built-in drivers for Attention Indicators
2023-10-28Merge branch 'pci/enumeration'Bjorn Helgaas
- Add and use pci_get_base_class() to search for all PCI_BASE_CLASS_DISPLAY devices (Sui Jingfeng) - Fix a vmd check for multi-function devices (Ilpo Järvinen) - Add PCI_HEADER_TYPE_MFD and use it to replace literals (Ilpo Järvinen) - Use acpi_evaluate_dsm_typed() instead of open-coding it (Andy Shevchenko) - Keep .remove() and .probe() callbacks (previously marked __init) in case they're used via sysfs (Uwe Kleine-König) * pci/enumeration: PCI: keystone: Don't discard .probe() callback PCI: keystone: Don't discard .remove() callback PCI: kirin: Don't discard .remove() callback PCI: exynos: Don't discard .remove() callback PCI/ACPI: Use acpi_evaluate_dsm_typed() PCI: Use PCI_HEADER_TYPE_* instead of literals PCI: Add PCI_HEADER_TYPE_MFD definition PCI: vmd: Correct PCI Header Type Register's multi-function check drm/radeon: Use pci_get_base_class() to reduce duplicated code drm/amdgpu: Use pci_get_base_class() to reduce duplicated code drm/nouveau: Use pci_get_base_class() to reduce duplicated code ALSA: hda: Use pci_get_base_class() to reduce duplicated code PCI: Add pci_get_base_class() helper
2023-10-28Merge branch 'pci/endpoint'Bjorn Helgaas
- Use IS_ERR_OR_NULL() helper function instead of open-coding it (Ruan Jinjie) * pci/endpoint: PCI: endpoint: Use IS_ERR_OR_NULL() helper function
2023-10-28Merge branch 'pci/ats'Bjorn Helgaas
- Disable ATS for Intel IPU E2000 A- and B-stepping devices to avoid invalidation message endianness erratum (Bartosz Pawlowski) * pci/ats: PCI: Disable ATS for specific Intel IPU E2000 devices PCI: Extract ATS disabling to a helper function
2023-10-28Merge branch 'pci/aspm'Bjorn Helgaas
* pci/aspm: PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common() Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1" PCI/ASPM: Convert printk() to pr_*() and add include PCI/ASPM: Remove unnecessary includes PCI/ASPM: Use FIELD_MAX() instead of literals PCI/ASPM: Use time constants PCI/ASPM: Return U32_MAX instead of bit magic construct PCI/ASPM: Use FIELD_GET/PREP() to access PCIe capability fields PCI: Add PCI_L1SS_CTL2 fields
2023-10-27PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error ↵Robert Richter
handling AER corrected and uncorrectable internal errors (CIE/UIE) are masked in their corresponding mask registers per default once in power-up state. [1][2] Enable internal errors for RCECs to receive CXL downstream port errors of Restricted CXL Hosts (RCHs). [1] CXL 3.0 Spec, 12.2.1.1 - RCH Downstream Port Detected Errors [2] PCIe Base Spec r6.0, 7.8.4.3 Uncorrectable Error Mask Register, 7.8.4.6 Correctable Error Mask Register Co-developed-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20231018171713.1883517-19-rrichter@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-10-27PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handlerRobert Richter
In Restricted CXL Device (RCD) mode a CXL device is exposed as an RCiEP, but CXL downstream and upstream ports are not enumerated and not visible in the PCIe hierarchy. [1] Protocol and link errors from these non-enumerated ports are signaled as internal AER errors, either Uncorrectable Internal Error (UIE) or Corrected Internal Errors (CIE) via an RCEC. Restricted CXL host (RCH) downstream port-detected errors have the Requester ID of the RCEC set in the RCEC's AER Error Source ID register. A CXL handler must then inspect the error status in various CXL registers residing in the dport's component register space (CXL RAS capability) or the dport's RCRB (PCIe AER extended capability). [2] Errors showing up in the RCEC's error handler must be handled and connected to the CXL subsystem. Implement this by forwarding the error to all CXL devices below the RCEC. Since the entire CXL device is controlled only using PCIe Configuration Space of device 0, function 0, only pass it there [3]. The error handling is limited to currently supported devices with the Memory Device class code set (CXL Type 3 Device, PCI_CLASS_MEMORY_CXL, 502h), handle downstream port errors in the device's cxl_pci driver. Support for other CXL Device Types (e.g. a CXL.cache Device) can be added later. To handle downstream port errors in addition to errors directed to the CXL endpoint device, a handler must also inspect the CXL RAS and PCIe AER capabilities of the CXL downstream port the device is connected to. Since CXL downstream port errors are signaled using internal errors, the handler requires those errors to be unmasked. This is subject of a follow-on patch. The reason for choosing this implementation is that the AER service driver claims the RCEC device, but does not allow it to register a custom specific handler to support CXL. Connecting the RCEC hard-wired with a CXL handler does not work, as the CXL subsystem might not be present all the time. The alternative to add an implementation to the portdrv to allow the registration of a custom RCEC error handler isn't worth doing it as CXL would be its only user. Instead, just check for an CXL RCEC and pass it down to the connected CXL device's error handler. With this approach the code can entirely be implemented in the PCIe AER driver and is independent of the CXL subsystem. The CXL driver only provides the handler. [1] CXL 3.0 spec: 9.11.8 CXL Devices Attached to an RCH [2] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors [3] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices Co-developed-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-pci@vger.kernel.org Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20231018171713.1883517-18-rrichter@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-10-27PCI/AER: Refactor cper_print_aer() for use by CXL driver moduleTerry Bowman
The CXL driver plans to use cper_print_aer() for logging restricted CXL host (RCH) AER errors. cper_print_aer() is not currently exported and therefore not usable by the CXL drivers built as loadable modules. Export the cper_print_aer() function. Use the EXPORT_SYMBOL_NS_GPL() variant to restrict the export to CXL drivers. The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable cper_print_aer(). cper_print_aer() logs the AER registers and is useful in PCIE AER logging outside of APEI. Remove the CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer(). The cper_print_aer() function name implies CPER specific use but is useful in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer(). Also, update cxl_core to import CXL namespace imports. Co-developed-by: Robert Richter <rrichter@amd.com> Signed-off-by: Terry Bowman <terry.bowman@amd.com> Signed-off-by: Robert Richter <rrichter@amd.com> Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com> Cc: Oliver O'Halloran <oohall@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20231018171713.1883517-13-rrichter@amd.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-10-27PCI: qcom-ep: Add dedicated callback for writing to DBI2 registersManivannan Sadhasivam
The DWC core driver exposes the write_dbi2() callback for writing to the DBI2 registers in a vendor-specific way. On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be asserted before writing to any DBI2 registers and deasserted once done. So, let's implement the callback for the Qcom PCIe EP driver so that the DBI2 writes are correctly handled in the hardware. Without this callback, the DBI2 register writes like BAR size won't go through and as a result, the default BAR size is set for all BARs. [kwilczynski: commit log, renamed function to match the DWC convention] Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Cc: stable@vger.kernel.org # 5.16+
2023-10-26PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()Ilpo Järvinen
When using pcie_capability_clear_and_set_word() but not actually *setting* anything, use pcie_capability_clear_word() instead. Link: https://lore.kernel.org/r/20231026121924.2164-1-ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20231026121924.2164-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: squash] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-26PCI: endpoint: Fix double free in __pci_epc_create()Dan Carpenter
The pci_epc_release() function frees "epc" so the kfree() on the next line is a double free. Drop the redundant free. Fixes: 7711cbb4862a ("PCI: endpoint: Fix WARN() when an endpoint driver is removed") Link: https://lore.kernel.org/r/2ce68694-87a7-4c06-b8a4-9870c891b580@moroto.mountain Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-10-26PCI: xilinx-xdma: Add Xilinx XDMA Root Port driverThippeswamy Havalige
Add support for Xilinx XDMA Soft IP core as Root Port. The Zynq UltraScale+ MPSoCs devices support XDMA soft IP module in programmable logic. The integrated XDMA Soft IP block has integrated bridge function that can act as PCIe Root Port. [kwilczynski: correct indentation and whitespaces, Kconfig help update] Link: https://lore.kernel.org/linux-pci/20231003173453.938190-4-thippeswamy.havalige@amd.com Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-10-26PCI: xilinx-cpm: Move IRQ definitions to a common headerThippeswamy Havalige
Move the interrupt bit definitions to the pcie-xilinx-common.h file, which then can be shared between pcie-xilinx-cpm and the new xilinx-xdma drivers. While at it, also rename them so these definitions are not CPM-specific. No functional change intended. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231003173453.938190-2-thippeswamy.havalige@amd.com Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@amd.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-10-26Merge branches 'acpi-video', 'acpi-prm', 'acpi-apei' and 'acpi-pcc'Rafael J. Wysocki
Merge ACPI backlight driver updates, ACPI APEI updates, ACPI PRM updates and changes related to ACPI PCC for 6.7-rc1: - Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej Zary). - Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans de Goede). - Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de Goede). - Annotate struct prm_module_info with __counted_by (Kees Cook). - Fix AER info corruption in aer_recover_queue() when error status data has multiple sections (Shiju Jose). - Make APEI use ERST max execution time value for slow devices (Jeshua Smith). - Add support for platform notification handling to the PCC mailbox driver and modify it to support shared interrupts for multiple subspaces (Huisong Li). - Define common macros to use when referring to various bitfields in the PCC generic communications channel command and status fields and use them in some drivers (Sudeep Holla). * acpi-video: ACPI: video: Add acpi_backlight=vendor quirk for Toshiba Portégé R100 ACPI: video: Add "vendor" quirks for 3 Lenovo x86 Android tablets ACPI: video: Move Xiaomi Mi Pad 2 quirk to its own section * acpi-prm: ACPI: PRM: Annotate struct prm_module_info with __counted_by * acpi-apei: ACPI: APEI: Use ERST timeout for slow devices ACPI: APEI: Fix AER info corruption when error status data has multiple sections * acpi-pcc: soc: kunpeng_hccs: Migrate to use generic PCC shmem related macros hwmon: (xgene) Migrate to use generic PCC shmem related macros i2c: xgene-slimpro: Migrate to use generic PCC shmem related macros ACPI: PCC: Add PCC shared memory region command and status bitfields mailbox: pcc: Support shared interrupt for multiple subspaces mailbox: pcc: Add support for platform notification handling
2023-10-26PCI: xilinx-nwl: Modify ECAM size to enable support for 256 busesThippeswamy Havalige
The PCIe Root Port controller expects ECAM size to be set through software. As such, update the value of the NWL_ECAM_VALUE_DEFAULT macro to 16 to allow the controller to address the 256 MB ECAM region and, as such, enable support for detecting up to 256 buses. [kwilczynski: commit log] Link: https://patchwork.kernel.org/project/linux-pci/patch/20231016051102.1180432-5-thippeswamy.havalige@amd.com/ Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-10-26PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macroThippeswamy Havalige
Rename the NWL_ECAM_VALUE_DEFAULT macro to NWL_ECAM_MAX_SIZE and drop the no longer needed ecam_value variable from struct nwl_pcie. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231016051102.1180432-4-thippeswamy.havalige@amd.com Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-10-26PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fieldsThippeswamy Havalige
The PCI core already updates the primary, secondary and subordinate bus number registers fields of the Type 1 header. Thus, remove the redundant code from the nwl_pcie_bridge_init(). [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20231016051102.1180432-2-thippeswamy.havalige@amd.com Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2023-10-26PCI: hotplug: Add Ampere Altra Attention Indicator extension driverD Scott Phillips
On Ampere Altra, PCIe hotplug is handled through ACPI. A side interface is also present to request system firmware control of the hotplug Attention Indicators. Add an ACPI PCI Hotplug companion driver to support Attention Indicator control. Link: https://lore.kernel.org/r/20230930002036.6491-2-scott@os.amperecomputing.com Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> [bhelgaas: mask domain to low 4 bits] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
2023-10-25PCI/AER: Factor out interrupt toggling into helpersKai-Heng Feng
There are many places that enable and disable AER interrupt, so move them into helpers. Link: https://lore.kernel.org/r/20230512000014.118942-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-10-25PCI: acpiphp: Allow built-in drivers for Attention IndicatorsD Scott Phillips
Since the introduction of the attention callback in acpiphp, a non-zero struct module *owner has been required in acpiphp_register_attention(). The intent seemed to be that the core code could hold a refcount on the module while invoking a callback. This check accidentally precludes the possibility of attention callbacks to built-in drivers. Remove the check on `struct module *owner` in acpiphp_register_attention() so attention callbacks can also be registered from built-in drivers. Link: https://lore.kernel.org/r/20230930002036.6491-1-scott@os.amperecomputing.com Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI/portdrv: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24PCI/VC: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-10-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24PCI/PTM: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() and FIELD_PREP() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-9-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24PCI/PME: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-8-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24PCI/ATS: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()Heiner Kallweit
aspm_attr_store_common(), which handles sysfs control of ASPM, has the same problem as fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1"): disabling L1 adds only ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask. Enabling one substate, e.g., L1.1, via sysfs removes ASPM_L1 from the disable mask. Since disabling L1 via sysfs doesn't add any of the substates to the disable mask, enabling L1.1 actually enables *all* the substates. In this scenario: - Write 0 to "l1_aspm" to disable L1 - Write 1 to "l1_1_aspm" to enable L1.1 the intention is to disable L1 and all L1.x substates, then enable just L1.1, but in fact, *all* L1.x substates are enabled. Fix this by explicitly disabling all the L1.x substates when disabling L1. Fixes: 72ea91afbfb0 ("PCI/ASPM: Add sysfs attributes for controlling ASPM link states") Link: https://lore.kernel.org/r/6ba7dd79-9cfe-4ed0-a002-d99cb842f361@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2023-10-24Revert "PCI/ASPM: Disable only ASPM_STATE_L1 when driver, disables L1"Heiner Kallweit
This reverts commit fb097dcd5a28c0a2325632405c76a66777a6bed9. After fb097dcd5a28 ("PCI/ASPM: Disable only ASPM_STATE_L1 when driver disables L1"), disabling L1 via pci_disable_link_state(PCIE_LINK_STATE_L1), then enabling one substate, e.g., L1.1, via sysfs actually enables *all* the substates. For example, r8169 disables L1 because of hardware issues on a number of systems, which implicitly disables the L1.1 and L1.2 substates. On some systems, L1 and L1.1 work fine, but L1.2 causes missed rx packets. Enabling L1.1 via the sysfs "aspm_l1_1" attribute unexpectedly enables L1.2 as well as L1.1. After fb097dcd5a28, pci_disable_link_state(PCIE_LINK_STATE_L1) adds only ASPM_L1 (but not any of the L1.x substates) to the "aspm_disable" mask: --- Before fb097dcd5a28 +++ After fb097dcd5a28 # r8169 disables L1: pci_disable_link_state(PCIE_LINK_STATE_L1) - disable |= ASPM_L1 | ASPM_L1_1 | ASPM_L1_2 | ... # disable L1, L1.x + disable |= ASPM_L1 # disable L1 only # write "1" to sysfs "aspm_l1_1" attribute: l1_1_aspm aspm_attr_store_common(state = ASPM_L1_1) disable &= ~ASPM_L1_1 # enable L1.1 if (state & (ASPM_L1_1 | ...)) # if enabling any substate disable &= ~ASPM_L1 # enable L1 # final state: - disable = ASPM_L1_2 | ... # L1, L1.1 enabled; L1.2 disabled + disable = 0 # L1, L1.1, L1.2 all enabled Enabling an L1.x substate removes the substate and L1 from the "aspm_disable" mask. After fb097dcd5a28, the substates were not added to the mask when disabling L1, so enabling one substate implicitly enables all of them. Revert fb097dcd5a28 so enabling one substate doesn't enable the others. Link: https://lore.kernel.org/r/c75931ac-7208-4200-9ca1-821629cf5e28@gmail.com Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> [bhelgaas: work through example in commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2023-10-24PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirkBjorn Helgaas
Use FIELD_GET() to remove dependences on the field position, i.e., the shift value. No functional change intended. Separate because this isn't as trivial as the other FIELD_GET() changes. See 907830b0fc9e ("PCI: Add a REBAR size quirk for Sapphire RX 5600 XT Pulse") Link: https://lore.kernel.org/r/20231010204436.1000644-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Nirmoy Das <nirmoy.das@amd.com>
2023-10-24PCI: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() and FIELD_PREP() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24PCI/MSI: Use FIELD_GET/PREP()Ilpo Järvinen
Instead of custom masking and shifting, use FIELD_GET/PREP() with register fields. Link: https://lore.kernel.org/r/20231018113254.17616-8-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI/DPC: Use defines with DPC reason fieldsIlpo Järvinen
Add new defines for DPC reason fields and use them instead of literals. Link: https://lore.kernel.org/r/20231018113254.17616-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: shorten comments] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI/DPC: Use defined fields with DPC_CTL registerIlpo Järvinen
Instead of using a literal to clear bits, add PCI_EXP_DPC_CTL_EN_MASK and use the usual pattern to modify a bitfield. While at it, rearrange RMW code more logically together. Link: https://lore.kernel.org/r/20231018113254.17616-6-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI/DPC: Use FIELD_GET()Bjorn Helgaas
Use FIELD_GET() to remove dependencies on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231018113254.17616-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI: hotplug: Use FIELD_GET/PREP()Ilpo Järvinen
Instead of handcrafted shifts to handle register fields, use FIELD_GET/FIELD_PREP(). Link: https://lore.kernel.org/r/20231018113254.17616-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-24PCI: dwc: Use FIELD_GET/PREP()Ilpo Järvinen
Convert open-coded variants of PCI field access into FIELD_GET/PREP() to make the code easier to understand. Add two missing defines into pci_regs.h. Logically, the Max No-Snoop Latency Register is a separate word sized register in the PCIe spec, but the pre-existing LTR defines in pci_regs.h with dword long values seem to consider the registers together (the same goes for the only user). Thus, follow the custom and make the new values also take both word long LTR registers as a joint dword register. Link: https://lore.kernel.org/r/20231024110336.26264-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-23PCI/P2PDMA: Remove redundant gotoTadeusz Struk
Remove redundant goto in pci_alloc_p2pmem(). Link: https://lore.kernel.org/r/20231023084050.55230-1-tstruk@gmail.com Signed-off-by: Tadeusz Struk <tstruk@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2023-10-23PCI: rcar-gen4: Add endpoint mode supportYoshihiro Shimoda
Add R-Car Gen4 PCIe controller for endpoint mode. This controller is based on Synopsys DesignWare PCIe. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-14-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-23PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host modeYoshihiro Shimoda
Add R-Car Gen4 PCIe controller support for host mode. This controller is based on Synopsys DesignWare PCIe. However, this particular controller has a number of vendor-specific registers, and as such, requires initialization code like mode setting and retraining and so on. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-23PCI: dwc: endpoint: Introduce .pre_init() and .deinit()Yoshihiro Shimoda
Renesas R-Car Gen4 PCIe controllers require vendor-specific initialization before .init(). To use dw->dbi and dw->num-lanes in the initialization code, introduce .pre_init() into struct dw_pcie_ep_ops. While at it, also introduce .deinit() to disable the controller by using vendor-specific de-initialization. Note that the ep_init in the struct dw_pcie_ep_ops should be renamed to init later. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-9-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-23PCI: dwc: Expose dw_pcie_write_dbi2() to moduleYoshihiro Shimoda
Since no PCIe controller drivers call this, this change is not required for now. But, Renesas R-Car Gen4 PCIe controller driver will call this and if the controller driver is built as a kernel module, the following build error happens: ERROR: modpost: "dw_pcie_write_dbi2" [drivers/pci/controller/dwc/pcie-rcar-gen4-host-drv.ko] undefined! So, expose dw_pcie_write_dbi2() for it. Link: https://lore.kernel.org/linux-pci/20230926122431.3974714-8-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-20PCI: dwc: Expose dw_pcie_ep_exit() to moduleYoshihiro Shimoda
Since no PCIe controller drivers call this, this change is not required for now. But, Renesas R-Car Gen4 PCIe controller driver will call this and if the controller driver is built as a kernel module, the following build error happens: ERROR: modpost: "dw_pcie_ep_exit" [drivers/pci/controller/dwc/pcie-rcar-gen4-ep-drv.ko] undefined! So, expose dw_pcie_ep_exit() for it. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-8-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-20PCI: dwc: Add EDMA_UNROLL capability flagYoshihiro Shimoda
Renesas R-Car Gen4 PCIe controllers have an unexpected register value in the eDMA CTRL register. So, add a new capability flag "EDMA_UNROLL" which would force the unrolled eDMA mapping for the problematic device. Suggested-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-7-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2023-10-20PCI: dwc: endpoint: Add multiple PFs support for dbi2Yoshihiro Shimoda
The commit 24ede430fa49 ("PCI: designware-ep: Add multiple PFs support for DWC") added .func_conf_select() to get the configuration space of different PFs and assumed that the offsets between dbi and dbi2 would be the same. However, Renesas R-Car Gen4 PCIe controllers have different offsets of function 1: dbi (+0x1000) and dbi2 (+0x800). To get the offset for dbi2, add .get_dbi2_offset() and dw_pcie_ep_get_dbi2_offset(). Note: - .func_conf_select() should be renamed later. - dw_pcie_ep_get_dbi2_offset() will call .func_conf_select() if .get_dbi2_offset() doesn't exist for backward compatibility. - dw_pcie_writeX_{dbi/dbi2} APIs accepted the func_no argument, so that these offset calculations are contained in the API definitions itself as it should. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-6-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-10-20PCI: tegra194: Drop PCI_EXP_LNKSTA_NLW settingYoshihiro Shimoda
dw_pcie_setup() is already setting PCI_EXP_LNKCAP_MLW to pcie->num_lanes in the PCI_EXP_LNKCAP register for programming maximum link width. Hence, remove the redundant setting here. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-5-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-08-01 15:36:36 +0000