| Age | Commit message (Collapse) | Author |
|---|
|
Don't let EC control suspend/resume sequence. If the EC controls the
lightbar and sets the sequence when it notices the chipset transitioning
between states, we can't make exceptions for cases where we don't want
to activate the lightbar. Instead, let's move the suspend/resume
notifications into the kernel so we can selectively play the sequences.
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Add a program feature so we can upload and run programs for lightbar
sequences. We should be able to use this to shift sequences out of the
EC and save space there.
$ cat <suitable program bin> > /sys/devices/.../cros_ec/program
$ echo program > /sys/devices/.../cros_ec/sequence
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
This patch installs a notify handler to process MKBP events for EC
firmware directing them over ACPI.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
This patch adds suspend and resume pm ops to the LPC ChromeOS EC driver.
These LPC handlers call the croc_ec generic handlers.
Signed-off-by: Archana Patni <archana.patni@intel.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
This patch removes platform_device_register() call and adds an ACPI
device id structure. The driver is now automatically probed for devices
with a GOOG0004 ACPI entry.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
This adds support for the ChromeOS LPC Microchip Embedded Controller
(mec1322) variant.
mec1322 accesses I/O region [800h, 9ffh] through embedded memory
interface (EMI) rather than LPC.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Call common functions for read / write to prepare support for future
LPC protocol variants which use different I/O ops than inb / outb.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Allow the intel-hid driver to wake up the system from suspend-to-idle
by configuring its platform device as a wakeup one by default and
switching it over to a system wakeup events triggering mode during
system suspend transitions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Allow the intel-vbtn driver to wake up the system from suspend-to-idle
by configuring its platform device as a wakeup one by default and
switching it over to a system wakeup events triggering mode during
system suspend transitions.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Declare thermal_cooling_device_ops structure as const as it is only passed
as an argument to the function thermal_cooling_device_register and this
argument is of type const. So, declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Declare thermal_cooling_device_ops structure as const as it is only passed
as an argument to the function thermal_cooling_device_register and this
argument is of type const. So, declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Dell Latitude 3160 does not have keyboard backlight, but there is a
sysfs interface for it, which does nothing at all.
KBD_LED_ON_TOKEN is the only token can be found. Since it doesn't have
KBD_LED_OFF_TOKEN or KBD_LED_AUTO_*_TOKEN, it should be safe to assume
at least two tokens should be present to support keyboard backlight.
Not all models have ON token - they may have multiple AUTO tokens instead.
Models which do not use SMBIOS token to control keyboard backlight, also
have this issue. Brightness level is 0 on these models. Verified on Dell
Inspiron 3565.
Reports keyboard backlight is supported only when at least two modes are
present.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Pali Rohár found that there have some wmi query/evaluation
code that they used 'one' as the first WMI instance number.
But the number is indexed from zero that it's must less than
the instance_count in _WDG.
This patch changes those instance number from one to zero.
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Currently in WCOVE PMIC MFD driver, all second level IRQ chips
are chained to the respective first level IRQs. So there is no
need for explicitly unmasking the first level IRQ in this
driver. This patches removes this level 1 IRQ unmask support.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Lenovo Legion Y720-15IKBN is yet another Lenovo model that does not
have an hw rfkill switch, resulting in wifi always reported as hard
blocked.
Add the model to the list of models without rfkill switch.
Signed-off-by: Olle Liljenzin <olle@liljenzin.se>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Lenovo Legion Y520-15IKBN is yet another Lenovo model that does not
have an hw rfkill switch, resulting in wifi always reported as hard
blocked.
Add the model to the list of models without rfkill switch.
Signed-off-by: Olle Liljenzin <olle@liljenzin.se>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add touchscreen info for the Point of View mobii wintab p800w tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
This dumps the EC panic information from the previous reboot.
Similar to the information presented by ectool panicinfo, except
that we do not bother doing any parsing (we should write a small
offline tool for that).
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
We should output or receive every byte in the param / reply struct,
unrelated to the pointer size.
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
[bleung: Picked from crosreview.com/444085 for cros_ec_debugfs.c only.
cros_ec.c upstream had a different cros_ec_sleep_event which didn't
have the sizeof issue]
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
If the EC supports the new CONSOLE_READ command type, then we
place a console_log file in debugfs for that EC device which allows
us to grab EC logs. The kernel will poll every 10 seconds for the
log and keep its own buffer, but userspace should grab this and
write it out to some logs which actually get rotated.
Signed-off-by: Eric Caruso <ejcaruso@chromium.org>
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
[bleung: restored original version of this commit, with pointer size
issue to be fixed in next commit]
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Add cros_ec_get_event() entry point to retrieve event within functions
called by the notifier.
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fix from Darren Hart:
"Just a single patch to fix an oops in the intel_telemetry_debugfs
module load/unload"
* tag 'platform-drivers-x86-v4.12-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: intel_telemetry_debugfs: fix oops when load/unload module
|
|
Add touchscreen info for Pipo W2S tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Some peripherals on Bay Trail and Cherry Trail platforms signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system. When this happens software needs to explicitly
clear the PME bus 0 status bit in the GPE0a_STS register to avoid an
IRQ storm on IRQ 9.
This is modelled in ACPI through the INT0002 ACPI device, which is
called a "Virtual GPIO controller" in ACPI because it defines the
event handler to call when the PME triggers through _AEI and _L02
methods as would be done for a real GPIO interrupt in ACPI.
This commit adds a driver which registers the Virtual GPIOs expected
by the DSDT on these devices, letting gpiolib-acpi claim the
virtual GPIO and install a GPIO-interrupt handler which call the _L02
handler as it would for a real GPIO controller.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
object_id and notify_id are in one union structure and their meaning is
defined by flags. Therefore do not print notify_id for non-event block and
do not print object_id for event block. Remove also reserved member as it
does not have any defined meaning or type yet.
As object_id and notify_id union members overlaps and have different types,
it caused that kernel print to dmesg binary data. This patch eliminates it.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Add const to rfkill_ops structures that are only passed as an argument
to the functions rfkill_alloc or samsung_new_rfkill. These arguments are
of type const, so such structures can be annotated with const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add const to rfkill_ops structure as it is only passed as an argument
to the functions rfkill_alloc. This argument is of type const,
so annotate the structure with const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add const to rfkill_ops structures that are only passed as an argument
to the functions rfkill_alloc or samsung_new_rfkill. These arguments are
of type const, so such structures can be annotated with const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add copyright statements for Andy Lutomirski and Darren Hart (VMware)
for their contributions to the WMI bus infrastructure and the creation
of the wmi-bmof driver.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
|
|
If a machine reports a RF Button in the communication button device
bitmap, we need to remove it before calling Get Device Status otherwise
it will return the "Undefined device" (0xE2) error code.
Although this may be a BIOS bug, we don't really need to get or set the
RF Button status. The status indicator LED embedded in the button is
controlled by firmware logic, depending on the status of the wireless
radios present on the machine (WiFi || WWAN).
This commit fixes the wireless status indicator LED on the Acer
TravelMate P648-G2-MG, and cleans the following message from the kernel
log: "Get Current Device Status failed: 0xe2 - 0x0".
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: "Lee, Chun-Yi" <joeyli.kernel@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The struct pcc_keyinput is not used in panasonic-laptop and in
anywhere in kernel, and it can be removed.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Acked-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The variable is used uninitialized which might come into unexpected
behaviour on some Samsung laptops.
Initialize it to 0xffff which seems a proper value for non-supported
feature.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This fixes an oops found while testing load/unload of the
intel_telemetry_debugfs module. module_init uses register_pm_notifier
for PM callbacks, but unregister_pm_notifier was missing from
module_exit.
[ 97.481860] BUG: unable to handle kernel paging request at ffffffffa006f010
[ 97.489742] IP: blocking_notifier_chain_register+0x3a/0xa0
[ 97.495898] PGD 2e0a067
[ 97.495899] PUD 2e0b063
[ 97.498737] PMD 179e29067
[ 97.501573] PTE 0
[ 97.508423] Oops: 0000 1 PREEMPT SMP
[ 97.512724] Modules linked in: intel_telemetry_debugfs intel_rapl gpio_keys dwc3 udc_core intel_telemetry_pltdrv intel_punit_ipc intel_telemetry_core rtc_cmos efivars x86_pkg_temp_thermal iwlwifi snd_hda_codec_hdmi soc_button_array btusb cfg80211 btrtl mei_me hci_uart btbcm mei btintel i915 bluetooth intel_pmc_ipc snd_hda_intel spi_pxa2xx_platform snd_hda_codec dwc3_pci snd_hda_core tpm_tis tpm_tis_core tpm efivarfs
[ 97.558453] CPU: 0 PID: 889 Comm: modprobe Not tainted 4.11.0-rc6-intel-dev-bkc #1
[ 97.566950] Hardware name: Intel Corp. Joule DVT3/SDS, BIOS GTPP181A.X64.0143.B30.1701132137 01/13/2017
[ 97.577518] task: ffff8801793a21c0 task.stack: ffff8801793f0000
[ 97.584162] RIP: 0010:blocking_notifier_chain_register+0x3a/0xa0
[ 97.590903] RSP: 0018:ffff8801793f3c58 EFLAGS: 00010286
[ 97.596802] RAX: ffffffffa006f000 RBX: ffffffff81e3ea20 RCX: 0000000000000000
[ 97.604812] RDX: ffff880179eaf210 RSI: ffffffffa0131000 RDI: ffffffff81e3ea20
[ 97.612821] RBP: ffff8801793f3c68 R08: 0000000000000006 R09: 000000000000005c
[ 97.620847] R10: 0000000000000000 R11: 0000000000000006 R12: ffffffffa0131000
[ 97.628855] R13: 0000000000000000 R14: ffff880176e35f48 R15: ffff8801793f3ea8
[ 97.636865] FS: 00007f7eeba07700(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000
[ 97.645948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 97.652423] CR2: ffffffffa006f010 CR3: 00000001775ef000 CR4: 00000000003406f0
[ 97.660423] Call Trace:
[ 97.663166] ? 0xffffffffa0031000
[ 97.666885] register_pm_notifier+0x18/0x20
[ 97.671581] telemetry_debugfs_init+0x92/0x1000
Signed-off-by: Priyalee Kushwaha <priyalee.kushwaha@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
We are trying to get rid of DRIVER_ATTR(), and the thinkpad_acpi
driver's attributes can be trivially changed to use DRIVER_ATTR_RO() and
DRIVER_ATTR_RW().
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: <ibm-acpi-devel@lists.sourceforge.net>
Cc: <platform-driver-x86@vger.kernel.org>
Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move some initialization out of _init and into _probe.
Update signatures and logic to use the wmi bus and device structures.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
[dvhart: drop deprecated sparse_keymap_free, order declarations, add commit msg]
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Many laptops (and maybe servers?) have embedded WMI Binary MOF metadata.
We do not yet have open-source tools for processing the data, although
one is in the works thanks to Pali:
https://github.com/pali/bmfdec
There is currently no interface to get the data in the first place. By
exposing it, we facilitate the development of new tools.
This is based on the original work of Andy Lutomirski <luto@kernel.org>,
but contains several modifications in response to various reviews.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
The Microsoft WMI documentation requires all data blocks to implement
the Query Control Method (WQxx). If we encounter a data block not
implementing this control method, issue a warning, and ignore the data
block. Remove the "readable" attribute as all data blocks must be
readable (query-able).
Be consistent with the language in the documentation, replace the
"writable" attribute with "setable".
Simplify (flatten) the control flow of wmi_create_device a bit while
we are updating it for the above changes.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Some subdrivers need to access sibling devices. This gives them a
clean way to do so.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
We already have the PNP glue to instantiate platform devices for the
ACPI devices that WMI drives. WMI should therefore attach to the
platform device, not the ACPI node.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
wmi_query_block is unnecessarily indirect. Add a straightforward
method for wmi bus drivers to use to read block data.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
As a platform driver, acpi_driver.notify will not be available,
so use acpi_install_notify_handler as we will be converting to a
platform driver.
This gives event drivers a simple way to handle events. It
also seems closer to what the Windows docs suggest that Windows
does: it sounds like, in Windows, the mapper is responsible for
called _WED before dispatching to the subdriver.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
[dvhart: merge two development commits and update commit message]
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
At some point, we will want sub-drivers to get references to other
devices on the same WMI bus. This change is needed to avoid races.
This ends up simplifying the setup code and fixing some leaks, too.
This is based on the original work of Andy Lutomirski <luto@kernel.org>,
but includes several modifications, many in response to review from
Michał Kępień <kernel@kempniu.pl>:
https://www.spinics.net/lists/platform-driver-x86/msg08201.html
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Dell XPS 13 9350 has one RW data object, one RO data object, and one
totally inaccessible data object. Check for the existence of the
accessor methods and report in sysfs.
The docs also permit WQxx getters for single-instance objects to
take no parameters. Probe for that as well to avoid ACPICA warnings
about mismatched signatures.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Divide the "data", "method" and "event" types. All devices get
"instance_count" and "expensive" attributes, data and method devices get
"object_id" attributes, and event devices get "notify_id" attributes.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
We have two memory leaks. If guid_already_parsed returned true, we leak
the wmi_block. If wmi_create_device failed, we leak the device.
Simplify the logic and fix both of them.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
WMI is logically a bus: the WMI driver binds to an ACPI node (or
more than one), and each instance of the WMI driver enumerates its
children and hopes that drivers will attach to the children that are
useful.
This patch gives WMI a driver model bus type and the ability to
match to drivers. The bus itself is a device in the new "wmi_bus"
class, and all of the individual WMI devices are slotted into the
device hierarchy correctly.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Currently we free all devices when we detach from any ACPI node.
Instead, keep track of which node WMI devices are attached to and
free them only as needed. While we are at it, match up notifications
with the device they came from correctly.
This will make our behavior more straightforward on systems with
more than one WMI node in the ACPI tables (e.g. the Dell XPS 13
9350).
This also adds a warning when GUIDs are not unique.
NB: The guid_string parameter in guid_already_parsed was a
little-endian binary GUID, not a string.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Rearrange acpi_wmi_add to use Linux's error handling conventions.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
We will need the device to convert to a bus architecture and bind WMI to
the platform device.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
