summaryrefslogtreecommitdiff
path: root/drivers/reset
AgeCommit message (Collapse)Author
2018-08-25Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "A couple of late-merged changes that would be useful to get in this merge window: - Driver support for reset of audio complex on Meson platforms. The audio driver went in this merge window, and these changes have been in -next for a while (just not in our tree). - Power management fixes for IOMMU on Rockchip platforms, getting closer to kexec working on them, including Chromebooks. - Another pass updating "arm,psci" -> "psci" for some properties that have snuck in since last time it was done" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/rockchip: Move irq request past pm_runtime_enable iommu/rockchip: Handle errors returned from PM framework arm64: rockchip: Force CONFIG_PM on Rockchip systems ARM: rockchip: Force CONFIG_PM on Rockchip systems arm64: dts: Fix various entry-method properties to reflect documentation reset: imx7: Fix always writing bits as 0 reset: meson: add meson audio arb driver reset: meson: add dt-bindings for meson-axg audio arb
2018-08-24Merge tag 'reset-fixes-for-4.18' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson
into next/late Reset controller fixes for v4.18 This tag fixes reset assertion on i.MX7 for all non-inverted reset control bits. Currently only PCIE controller and PHY resets are used. * tag 'reset-fixes-for-4.18' of git://git.pengutronix.de/git/pza/linux: reset: imx7: Fix always writing bits as 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-07-23reset: imx7: Fix always writing bits as 0Leonard Crestez
Right now the only user of reset-imx7 is pci-imx6 and the reset_control_assert and deassert calls on pciephy_reset don't toggle the PCIEPHY_BTN and PCIEPHY_G_RST bits as expected. Fix this by writing 1 or 0 respectively. The reference manual is not very clear regarding SRC_PCIEPHY_RCR but for other registers like MIPIPHY and HSICPHY the bits are explicitly documented as "1 means assert, 0 means deassert". The values are still reversed for IMX7_RESET_PCIE_CTRL_APPS_EN. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-20reset: meson: add meson audio arb driverJerome Brunet
The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-19reset: uniphier: add reset control support for SPIKunihiko Hayashi
Add reset control for SPI controller on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: uniphier: add USB3 core reset controlKunihiko Hayashi
Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: simple: export reset_simple_ops to be referred from modulesKunihiko Hayashi
Allow reset_simple_ops to be referred from modules that use reset-simple framework by adding EXPORT_SYMBOL_GPL. Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: qcom: AOSS (always on subsystem) reset controllerSibi Sankar
Add reset controller driver for Qualcomm SDM845 SoC to control reset signals provided by AOSS for Modem, Venus ADSP, GPU, Camera, Wireless, Display subsystem Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (59 commits) ARM: tegra: fix compile-testing PCI host driver soc: rockchip: power-domain: add power domain support for px30 dt-bindings: power: add binding for px30 power domains dt-bindings: power: add PX30 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3228 dt-bindings: power: add binding for rk3228 power domains dt-bindings: power: add RK3228 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3128 dt-bindings: power: add binding for rk3128 power domains dt-bindings: power: add RK3128 SoCs header for power-domain soc: rockchip: power-domain: add power domain support for rk3036 dt-bindings: power: add binding for rk3036 power domains dt-bindings: power: add RK3036 SoCs header for power-domain dt-bindings: memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Remove Tegra114 SATA and AFI reset definitions memory: tegra: Register SMMU after MC driver became ready soc: mediatek: remove unneeded semicolon soc: mediatek: add a fixed wait for SRAM stable soc: mediatek: introduce a CAPS flag for scp_domain_data soc: mediatek: reuse regmap_read_poll_timeout helpers ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-27reset: uniphier: add LD11/LD20 stream demux system reset controlKatsuhiro Suzuki
Add reset lines for MPEG2 transport stream I/O and demux system (HSC) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: add SATA reset control support and change SATA-PHY IDKunihiko Hayashi
Add reset lines for SATA controller on UniPhier SoCs. This adds support for Pro4 and PXs3 in addition to PXs2. And this changes the ID of the reset line for SATA-PHY on PXs2. Since some SoCs have two controller instances with a common PHY, this moves the ID of SATA-PHY for consistency. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: add PCIe reset control supportKunihiko Hayashi
Add reset lines for PCIe controller on UniPhier SoCs. This adds support for Pro5, LD20 and PXs3. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: fix USB clock line for LD20Masahiro Yamada
For LD20, the bit 5 of the offset 0x200c turned out to be a USB3 reset. The hardware document says it is the GIO reset despite LD20 has no GIO bus, confusingly. Also, fix confusing comments for PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27Merge branch 'reset/lookup' into reset/nextPhilipp Zabel
Merge the reset lookup support for non-DT platforms, from an immutable branch provided for merging into the davinci tree.
2018-03-27reset: uniphier: add ethernet reset control support for PXs3Kunihiko Hayashi
Add reset lines for ethernet controller on PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: stm32mp1: Enable stm32mp1 reset driverGabriel Fernandez
stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register. Writing '0' on reset SET register has no effect Writing '1' on reset SET register activates the reset of the corresponding peripheral Writing '0' on reset CLEAR register has no effect Writing '1' on reset CLEAR register releases the reset of the corresponding peripheral See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset controlKatsuhiro Suzuki
Add reset lines for audio subsystem (AIO) on UniPhier Pro4/Pro5/PXs2 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada
This config select's MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: modify the way reset lookup works for board filesBartosz Golaszewski
Commit 7af1bb19f1d7 ("reset: add support for non-DT systems") introduced reset control lookup mechanism for boards that still use board files. The routine used to register lookup entries takes the corresponding reset_controlled_dev structure as argument. It's been determined however that for the first user of this new interface - davinci psc driver - it will be easier to register the lookup entries using the reset controller device name. This patch changes the way lookup entries are added. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [p.zabel@pengutronix.de: added missing ERR_PTR] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: add support for non-DT systemsBartosz Golaszewski
The reset framework only supports device-tree. There are some platforms however, which need to use it even in legacy, board-file based mode. An example of such architecture is the DaVinci family of SoCs which supports both device tree and legacy boot modes and we don't want to introduce any regressions. We're currently working on converting the platform from its hand-crafted clock API to using the common clock framework. Part of the overhaul will be representing the chip's power sleep controller's reset lines using the reset framework. This changeset extends the core reset code with a new reset lookup entry structure. It contains data allowing the reset core to associate reset lines with devices by comparing the dev_id and con_id strings. It also provides a function allowing drivers to register lookup entries with the framework. The new lookup function is only called as a fallback in case the of_node field is NULL and doesn't change anything for current users. Tested with a dummy reset driver with several lookup entries. An example lookup table registration from a driver can be found below: static struct reset_control_lookup foobar_reset_lookup[] = { RESET_LOOKUP("foo.0", "foo", 15), RESET_LOOKUP("bar.0", NULL, 5), }; foobar_probe() { ... reset_controller_add_lookup(&rcdev, foobar_reset_lookup, ARRAY_SIZE(foobar_reset_lookup)); ... } Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-20reset: simple: Enable for ASPEED systemsJoel Stanley
ASPEED BMC SoCs have a reset controller in the LPC IP that can be controlled using this driver to release the UARTs from reset. No special configuration is required, so only the compatible string is added. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-16reset: meson: enable level reset support on Meson8bMartin Blumenstingl
Commit a5a10afe04ef ("reset: meson: add level reset support for GX SoC family") only enabled the level resets for the newer GX SoC family. However, the older 32-Meson SoCs (Meson8, Meson8b and Meson8m2) also support level resets using the same offset as the newer GX SoCs. This removes the separation between Meson8b and the GX SoCs from the reset-meson driver to enable the level resets also on Meson8b. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-11-27reset: meson-axg: add compatible string for Meson-AXG SoCYixun Lan
Try to add compatible string explictly to support new Meson-AXG SoC. Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-11-27reset: make device_reset_optional() really optionalMasahiro Yamada
Commit bb475230b8e5 ("reset: make optional functions really optional") converted *_get_optional* functions, but device_reset_optional() was left behind. Convert it in the same way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-11-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18Merge branch 'reset/arc' into reset/nextPhilipp Zabel
Merge the AXS10x driver, which is also merged into git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git for-next
2017-10-18reset: zx2967: use the reset-simple driverPhilipp Zabel
The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-10-18reset: stm32: use the reset-simple driverPhilipp Zabel
The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com>
2017-10-18reset: socfpga: use the reset-simple driverPhilipp Zabel
Add reset line status readback, inverted status support, and socfpga device tree quirks to the simple reset driver, and use it to replace the socfpga driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-17reset: sunxi: use reset-simple driverPhilipp Zabel
Use the newly created copies in the reset-simple driver to replace the sunxi platform driver code and reset operations. The separate sunxi driver still remains to register the early reset controllers, but it reuses the reset operations in reset-simple. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-10-17reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967Philipp Zabel
Copy reusable parts from the sunxi driver, to add a driver for simple reset controllers with reset lines that can be controlled by toggling bits in exclusive, contiguous register ranges using read-modify-write cycles under a spinlock. The following patches will replace compatible reset drivers with reset-simple, extending it where necessary. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-10-17reset: meson: remove unneeded check in meson_reset_resetNeil Armstrong
The if (bank >= REG_COUNT) is not need since already checked by the default rcdev->of_xlate implementation which guarantees that id < rcdev->nr_resets. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-17reset: meson: add level reset support for GX SoC familyNeil Armstrong
The Amlogic GX SoC family embeds alternate registers to drive the reset levels next to the pulse registers. This patch adds support for level reset handling on the GX family only. The Meson8 family has an alternate way to handle level reset. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-05reset: uniphier: add PXs3 reset dataMasahiro Yamada
Add basic reset data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-04reset: socfpga: build the reset-socfpga for Stratix10 SOCDinh Nguyen
Enable the reset driver to get built for the Stratix10 platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-04reset: uniphier: add ethernet reset control supportKunihiko Hayashi
Add reset lines for ethernet controller on Pro4, PXs2, LD11 and LD20 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-04reset: socfpga: fix for 64-bit compilationDinh Nguyen
The SoCFPGA Stratix10 reset controller has 32-bit registers. Thus, we cannot use BITS_PER_LONG in computing the register and bit offset. Instead, we should be using the width of the hardware register for the calculation. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-21reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TESTGeert Uytterhoeven
The HSDK reset driver is only useful when building for an ARC HSDK platform. While at it, drop the "default n", as that is the default. Fixes: e0be864f14240cb1 ("ARC: reset: introduce HSDKv1 reset driver") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [p.zabel@pengutronix.de: rebased, renamed RESET_HSDK_V1 to RESET_HSDK] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18ARC: reset: introduce AXS10x reset driverEugeniy Paltsev
ARC AXS10x boards support custom IP-block which allows to control reset signals of selected peripherals. For example DW GMAC, etc... This block is controlled via memory-mapped register (AKA CREG) which represents up-to 32 reset lines. This regiter is self-clearing so we don't need to deassert line after reset. As of today only the following lines are used: - DW GMAC - line 5 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18ARC: reset: remove the misleading v1 suffix all overVineet Gupta
There is no plan yet to do a v2 board. And even if we were to do it only some IPs would actually change, so it be best to add suffixes at that point, not now ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18ARC: reset: Only build on archs that have IOMEMThomas Meyer
This avoids the error: drivers/reset/reset-hsdk-v1.o: In function `hsdkv1_reset_probe': /home/thomas/git/linux/drivers/reset/reset-hsdk-v1.c:101: undefined reference to `devm_ioremap_resource' collect2: error: ld returned 1 exit status Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-10Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 03:45:53 +0000