summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2023-09-01Merge tag 'tty-6.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...
2023-08-30Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO direct character device (cdev) interface support. This extracts the vfio device fd from the container and group model, and is intended to be the native uAPI for use with IOMMUFD (Yi Liu) - Enhancements to the PCI hot reset interface in support of cdev usage (Yi Liu) - Fix a potential race between registering and unregistering vfio files in the kvm-vfio interface and extend use of a lock to avoid extra drop and acquires (Dmitry Torokhov) - A new vfio-pci variant driver for the AMD/Pensando Distributed Services Card (PDS) Ethernet device, supporting live migration (Brett Creeley) - Cleanups to remove redundant owner setup in cdx and fsl bus drivers, and simplify driver init/exit in fsl code (Li Zetao) - Fix uninitialized hole in data structure and pad capability structures for alignment (Stefan Hajnoczi) * tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits) vfio/pds: Send type for SUSPEND_STATUS command vfio/pds: fix return value in pds_vfio_get_lm_file() pds_core: Fix function header descriptions vfio: align capability structures vfio/type1: fix cap_migration information leak vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver vfio/pds: Add Kconfig and documentation vfio/pds: Add support for firmware recovery vfio/pds: Add support for dirty page tracking vfio/pds: Add VFIO live migration support vfio/pds: register with the pds_core PF pds_core: Require callers of register/unregister to pass PF drvdata vfio/pds: Initial support for pds VFIO driver vfio: Commonize combine_ranges for use in other VFIO drivers kvm/vfio: avoid bouncing the mutex when adding and deleting groups kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() docs: vfio: Add vfio device cdev description vfio: Compile vfio_group infrastructure optionally vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev() ...
2023-08-29Merge tag 'net-next-6.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Increase size limits for to-be-sent skb frag allocations. This allows tun, tap devices and packet sockets to better cope with large writes operations - Store netdevs in an xarray, to simplify iterating over netdevs - Refactor nexthop selection for multipath routes - Improve sched class lifetime handling - Add backup nexthop ID support for bridge - Implement drop reasons support in openvswitch - Several data races annotations and fixes - Constify the sk parameter of routing functions - Prepend kernel version to netconsole message Protocols: - Implement support for TCP probing the peer being under memory pressure - Remove hard coded limitation on IPv6 specific info placement inside the socket struct - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per socket scaling factor - Scaling-up the IPv6 expired route GC via a separated list of expiring routes - In-kernel support for the TLS alert protocol - Better support for UDP reuseport with connected sockets - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR header size - Get rid of additional ancillary per MPTCP connection struct socket - Implement support for BPF-based MPTCP packet schedulers - Format MPTCP subtests selftests results in TAP - Several new SMC 2.1 features including unique experimental options, max connections per lgr negotiation, max links per lgr negotiation BPF: - Multi-buffer support in AF_XDP - Add multi uprobe BPF links for attaching multiple uprobes and usdt probes, which is significantly faster and saves extra fds - Implement an fd-based tc BPF attach API (TCX) and BPF link support on top of it - Add SO_REUSEPORT support for TC bpf_sk_assign - Support new instructions from cpu v4 to simplify the generated code and feature completeness, for x86, arm64, riscv64 - Support defragmenting IPv(4|6) packets in BPF - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix perf+libbpf issue related to custom section handling - Introduce bpf map element count and enable it for all program types - Add a BPF hook in sys_socket() to change the protocol ID from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress - Add uprobe support for the bpf_get_func_ip helper - Check skb ownership against full socket - Support for up to 12 arguments in BPF trampoline - Extend link_info for kprobe_multi and perf_event links Netfilter: - Speed-up process exit by aborting ruleset validation if a fatal signal is pending - Allow NLA_POLICY_MASK to be used with BE16/BE32 types Driver API: - Page pool optimizations, to improve data locality and cache usage - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need for raw ioctl() handling in drivers - Simplify genetlink dump operations (doit/dumpit) providing them the common information already populated in struct genl_info - Extend and use the yaml devlink specs to [re]generate the split ops - Introduce devlink selective dumps, to allow SF filtering SF based on handle and other attributes - Add yaml netlink spec for netlink-raw families, allow route, link and address related queries via the ynl tool - Remove phylink legacy mode support - Support offload LED blinking to phy - Add devlink port function attributes for IPsec New hardware / drivers: - Ethernet: - Broadcom ASP 2.0 (72165) ethernet controller - MediaTek MT7988 SoC - Texas Instruments AM654 SoC - Texas Instruments IEP driver - Atheros qca8081 phy - Marvell 88Q2110 phy - NXP TJA1120 phy - WiFi: - MediaTek mt7981 support - Can: - Kvaser SmartFusion2 PCI Express devices - Allwinner T113 controllers - Texas Instruments tcan4552/4553 chips - Bluetooth: - Intel Gale Peak - Qualcomm WCN3988 and WCN7850 - NXP AW693 and IW624 - Mediatek MT2925 Drivers: - Ethernet NICs: - nVidia/Mellanox: - mlx5: - support UDP encapsulation in packet offload mode - IPsec packet offload support in eswitch mode - improve aRFS observability by adding new set of counters - extends MACsec offload support to cover RoCE traffic - dynamic completion EQs - mlx4: - convert to use auxiliary bus instead of custom interface logic - Intel - ice: - implement switchdev bridge offload, even for LAG interfaces - implement SRIOV support for LAG interfaces - igc: - add support for multiple in-flight TX timestamps - Broadcom: - bnxt: - use the unified RX page pool buffers for XDP and non-XDP - use the NAPI skb allocation cache - OcteonTX2: - support Round Robin scheduling HTB offload - TC flower offload support for SPI field - Freescale: - add XDP_TX feature support - AMD: - ionic: add support for PCI FLR event - sfc: - basic conntrack offload - introduce eth, ipv4 and ipv6 pedit offloads - ST Microelectronics: - stmmac: maximze PTP timestamping resolution - Virtual NICs: - Microsoft vNIC: - batch ringing RX queue doorbell on receiving packets - add page pool for RX buffers - Virtio vNIC: - add per queue interrupt coalescing support - Google vNIC: - add queue-page-list mode support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add port range matching tc-flower offload - permit enslavement to netdevices with uppers - Ethernet embedded switches: - Marvell (mv88e6xxx): - convert to phylink_pcs - Renesas: - r8A779fx: add speed change support - rzn1: enables vlan support - Ethernet PHYs: - convert mv88e6xxx to phylink_pcs - WiFi: - Qualcomm Wi-Fi 7 (ath12k): - extremely High Throughput (EHT) PHY support - RealTek (rtl8xxxu): - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU), RTL8192EU and RTL8723BU - RealTek (rtw89): - Introduce Time Averaged SAR (TAS) support - Connector: - support for event filtering" * tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits) net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler net: stmmac: clarify difference between "interface" and "phy_interface" r8152: add vendor/device ID pair for D-Link DUB-E250 devlink: move devlink_notify_register/unregister() to dev.c devlink: move small_ops definition into netlink.c devlink: move tracepoint definitions into core.c devlink: push linecard related code into separate file devlink: push rate related code into separate file devlink: push trap related code into separate file devlink: use tracepoint_enabled() helper devlink: push region related code into separate file devlink: push param related code into separate file devlink: push resource related code into separate file devlink: push dpipe related code into separate file devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper devlink: push shared buffer related code into separate file devlink: push port related code into separate file devlink: push object register/unregister notifications into separate helpers inet: fix IP_TRANSPARENT error handling ...
2023-08-28Merge tag 's390-6.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add vfio-ap support to pass-through crypto devices to secure execution guests - Add API ordinal 6 support to zcrypt_ep11misc device drive, which is required to handle key generate and key derive (e.g. secure key to protected key) correctly - Add missing secure/has_secure sysfs files for the case where it is not possible to figure where a system has been booted from. Existing user space relies on that these files are always present - Fix DCSS block device driver list corruption, caused by incorrect error handling - Convert virt_to_pfn() and pfn_to_virt() from defines to static inline functions to enforce type checking - Cleanups, improvements, and minor fixes to the kernel mapping setup - Fix various virtual vs physical address confusions - Move pfault code to separate file, since it has nothing to do with regular fault handling - Move s390 documentation to Documentation/arch/ like it has been done for other architectures already - Add HAVE_FUNCTION_GRAPH_RETVAL support - Factor out the s390_hypfs filesystem and add a new config option for it. The filesystem is deprecated and as soon as all users are gone it can be removed some time in the not so near future - Remove support for old CEX2 and CEX3 crypto cards from zcrypt device driver - Add support for user-defined certificates: receive user-defined certificates with a diagnose call and provide them via 'cert_store' keyring to user space - Couple of other small fixes and improvements all over the place * tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits) s390/pci: use builtin_misc_device macro to simplify the code s390/vfio-ap: make sure nib is shared KVM: s390: export kvm_s390_pv*_is_protected functions s390/uv: export uv_pin_shared for direct usage s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36 s390/vfio-ap: handle queue state change in progress on reset s390/vfio-ap: use work struct to verify queue reset s390/vfio-ap: store entire AP queue status word with the queue object s390/vfio-ap: remove upper limit on wait for queue reset to complete s390/vfio-ap: allow deconfigured queue to be passed through to a guest s390/vfio-ap: wait for response code 05 to clear on queue reset s390/vfio-ap: clean up irq resources if possible s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ s390/ipl: refactor deprecated strncpy s390/ipl: fix virtual vs physical address confusion s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23] ...
2023-08-28Merge tag 'v6.6-vfs.super' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull superblock updates from Christian Brauner: "This contains the super rework that was ready for this cycle. The first part changes the order of how we open block devices and allocate superblocks, contains various cleanups, simplifications, and a new mechanism to wait on superblock state changes. This unblocks work to ultimately limit the number of writers to a block device. Jan has already scheduled follow-up work that will be ready for v6.7 and allows us to restrict the number of writers to a given block device. That series builds on this work right here. The second part contains filesystem freezing updates. Overview: The generic superblock changes are rougly organized as follows (ignoring additional minor cleanups): (1) Removal of the bd_super member from struct block_device. This was a very odd back pointer to struct super_block with unclear rules. For all relevant places we have other means to get the same information so just get rid of this. (2) Simplify rules for superblock cleanup. Roughly, everything that is allocated during fs_context initialization and that's stored in fs_context->s_fs_info needs to be cleaned up by the fs_context->free() implementation before the superblock allocation function has been called successfully. After sget_fc() returned fs_context->s_fs_info has been transferred to sb->s_fs_info at which point sb->kill_sb() if fully responsible for cleanup. Adhering to these rules means that cleanup of sb->s_fs_info in fill_super() is to be avoided as it's brittle and inconsistent. Cleanup shouldn't be duplicated between sb->put_super() as sb->put_super() is only called if sb->s_root has been set aka when the filesystem has been successfully born (SB_BORN). That complexity should be avoided. This also means that block devices are to be closed in sb->kill_sb() instead of sb->put_super(). More details in the lower section. (3) Make it possible to lookup or create a superblock before opening block devices There's a subtle dependency on (2) as some filesystems did rely on fill_super() to be called in order to correctly clean up sb->s_fs_info. All these filesystems have been fixed. (4) Switch most filesystem to follow the same logic as the generic mount code now does as outlined in (3). (5) Use the superblock as the holder of the block device. We can now easily go back from block device to owning superblock. (6) Export and extend the generic fs_holder_ops and use them as holder ops everywhere and remove the filesystem specific holder ops. (7) Call from the block layer up into the filesystem layer when the block device is removed, allowing to shut down the filesystem without risk of deadlocks. (8) Get rid of get_super(). We can now easily go back from the block device to owning superblock and can call up from the block layer into the filesystem layer when the device is removed. So no need to wade through all registered superblock to find the owning superblock anymore" Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/ * tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits) super: use higher-level helper for {freeze,thaw} super: wait until we passed kill super super: wait for nascent superblocks super: make locking naming consistent super: use locking helpers fs: simplify invalidate_inodes fs: remove get_super block: call into the file system for ioctl BLKFLSBUF block: call into the file system for bdev_mark_dead block: consolidate __invalidate_device and fsync_bdev block: drop the "busy inodes on changed media" log message dasd: also call __invalidate_device when setting the device offline amiflop: don't call fsync_bdev in FDFMTBEG floppy: call disk_force_media_change when changing the format block: simplify the disk_force_media_change interface nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl xfs use fs_holder_ops for the log and RT devices xfs: drop s_umount over opening the log and RT devices ext4: use fs_holder_ops for the log device ext4: drop s_umount over opening the log device ...
2023-08-23Merge branch 'vfio-ap' into featuresHeiko Carstens
Tony Krowiak says: =================== This patch series is for the changes required in the vfio_ap device driver to facilitate pass-through of crypto devices to a secure execution guest. In particular, it is critical that no data from the queues passed through to the SE guest is leaked when the guest is destroyed. There are also some new response codes returned from the PQAP(ZAPQ) and PQAP(TAPQ) commands that have been added to the architecture in support of pass-through of crypto devices to SE guests; these need to be accounted for when handling the reset of queues. =================== Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-23Merge tag 'vfs-6.6-merge-2' of ↵Christian Brauner
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux Pull filesystem freezing updates from Darrick Wong: New code for 6.6: * Allow the kernel to initiate a freeze of a filesystem. The kernel and userspace can both hold a freeze on a filesystem at the same time; the freeze is not lifted until /both/ holders lift it. This will enable us to fix a longstanding bug in XFS online fsck. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Message-Id: <20230822182604.GB11286@frogsfrogsfrogs> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21block: consolidate __invalidate_device and fsync_bdevChristoph Hellwig
We currently have two interfaces that take a block_devices and the find a mounted file systems to flush or invaldidate data on it. Both are a bit problematic because they only work for the "main" block devices that is used as s_dev for the super_block, and because they don't call into the file system at all. Merge the two into a new bdev_mark_dead helper that does both the syncing and invalidation and which is properly documented. This is in preparation of merging the functionality into the ->mark_dead holder operation so that it will work on additional block devices used by a file systems and give us a single entry point for invalidation of dead devices or media. Note that a single standalone fsync_bdev call for an obscure ioctl remains for now, but that one will also be deal with in a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-14-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-21dasd: also call __invalidate_device when setting the device offlineChristoph Hellwig
Don't just write out the data, but also invalidate all caches when setting the device offline. Stop canceling the offlining when writeback fails as there is no way to recover from that anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Message-Id: <20230811100828.1897174-12-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-20Merge commit b320441c04c9 ("Merge tag 'tty-6.5-rc7' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next We need the serial-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-18s390/vfio-ap: make sure nib is sharedTony Krowiak
Since the NIB is visible by HW, KVM and the (PV) guest it needs to be in non-secure or secure but shared storage. Return code 6 is used to indicate to a PV guest that its NIB would be on secure, unshared storage and therefore the NIB address is invalid. Unfortunately we have no easy way to check if a page is unshared after vfio_pin_pages() since it will automatically export an unshared page if the UV pin shared call did not succeed due to a page being in unshared state. Therefore we use the fact that UV pinning it a second time is a nop but trying to pin an exported page is an error (0x102). If we encounter this error, we do a vfio unpin and import the page again, since vfio_pin_pages() exported it. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-13-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36Tony Krowiak
Check for response codes 0x35 and 0x36 which are asynchronous return codes indicating a failure of the guest to associate a secret with a queue. Since there can be no interaction with this queue from the guest (i.e., the vcpus are out of SIE for hot unplug, the guest is being shut down or an emulated subsystem reset of the guest is taking place), let's go ahead and re-issue the ZAPQ to reset and zeroize the queue. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-10-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: handle queue state change in progress on resetTony Krowiak
A new APQSW response code (0xA) indicating the designated queue is in the process of being bound or associated to a configuration may be returned from the PQAP(ZAPQ) command. This patch introduces code that will verify when the PQAP(ZAPQ) command can be re-issued after receiving response code 0xA. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-9-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: use work struct to verify queue resetTony Krowiak
Instead of waiting to verify that a queue is reset in the vfio_ap_mdev_reset_queue function, let's use a wait queue to check the the state of the reset. This way, when resetting all of the queues assigned to a matrix mdev, we don't have to wait for each queue to be reset before initiating a reset on the next queue to be reset. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-8-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: store entire AP queue status word with the queue objectTony Krowiak
Store the entire AP queue status word returned from the ZAPQ command with the struct vfio_ap_queue object instead of just the response code field. The other information contained in the status word is need by the apq_reset_check function to display a proper message to indicate that the vfio_ap driver is waiting for the ZAPQ to complete because the queue is not empty or IRQs are still enabled. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-7-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: remove upper limit on wait for queue reset to completeTony Krowiak
The architecture does not define an upper limit on how long a queue reset (RAPQ/ZAPQ) can take to complete. In order to ensure both the security requirements and prevent resource leakage and corruption in the hypervisor, it is necessary to remove the upper limit (200ms) the vfio_ap driver currently waits for a reset to complete. This, of course, may result in a hang which is a less than desirable user experience, but until a firmware solution is provided, this is a necessary evil. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-6-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: allow deconfigured queue to be passed through to a guestTony Krowiak
When a queue is reset, the status response code returned from the reset operation is stored in the reset_rc field of the vfio_ap_queue structure representing the queue being reset. This field is later used to decide whether the queue should be passed through to a guest. If the reset_rc field is a non-zero value, the queue will be filtered from the list of queues passed through. When an adapter is deconfigured, all queues associated with that adapter are reset. That being the case, it is not necessary to filter those queues; so, if the status response code returned from a reset operation indicates the queue is deconfigured, the reset_rc field of the vfio_ap_queue structure will be set to zero so it will be passed through (i.e., not filtered). Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-5-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: wait for response code 05 to clear on queue resetTony Krowiak
Response code 05, AP busy, is a valid response code for a ZAPQ or TAPQ. Instead of returning error -EIO when a ZAPQ fails with response code 05, let's wait until the queue is no longer busy and try the ZAPQ again. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-4-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: clean up irq resources if possibleTony Krowiak
The architecture does not specify whether interrupts are disabled as part of the asynchronous reset or upon return from the PQAP/ZAPQ instruction. If, however, PQAP/ZAPQ completes with APQSW response code 0 and the interrupt bit in the status word is also 0, we know the interrupts are disabled and we can go ahead and clean up the corresponding resources; otherwise, we must wait until the asynchronous reset has completed. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Suggested-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-3-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQTony Krowiak
After a ZAPQ is executed to reset a queue, if the queue is not empty or interrupts are still enabled, the vfio_ap driver will wait for the reset operation to complete by repeatedly executing the TAPQ instruction and checking the 'E' and 'I' bits in the APQSW to verify that the queue is empty and interrupts are disabled. This is unnecessary because it is sufficient to check only the response code in the APQSW. If the reset is still in progress, the response code will be 02; however, if the reset has completed successfully, the response code will be 00. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Viktor Mihajlovski <mihajlov@linux.ibm.com> Link: https://lore.kernel.org/r/20230815184333.6554-2-akrowiak@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-18s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blobHolger Dengler
Secure execution guest environments require an empty pinblob in all key generation and unwrap requests. Empty pinblobs are only available in EP11 API ordinal 6 or higher. Add an empty pinblob to key generation and unwrap requests, if the AP secure binding facility is available. In all other cases, stay with the empty pin tag (no pinblob) and the current API ordinals. The EP11 API ordinal also needs to be considered when the pkey module tries to figure out the list of eligible cards for key operations with protected keys in secure execution environment. These changes are transparent to userspace but required for running an secure execution guest with handling key generate and key derive (e.g. secure key to protected key) correct. Especially using EP11 secure keys with the kernel dm-crypt layer requires this patch. Co-developed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributesHolger Dengler
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES securekey type as a supplement to the existing PKEY_TYPE_EP11 (which won't work in environments with session-bound keys). The pkey EP11 securekey attributes use PKEY_TYPE_EP11_AES (instead of PKEY_TYPE_EP11) keyblobs, to make the generated keyblobs usable also in environments, where session-bound keys are required. There should be no negative impacts to userspace because the internal structure of the keyblobs is opaque. The increased size of the generated keyblobs is reflected by the changed size of the attributes. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTLHolger Dengler
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES type for the PKEY_VERIFYKEY2 IOCTL to verify keyblobs of this type. Unfortunately, all PKEY_VERIFYKEY2 IOCTL requests with keyblobs of this type return with an error (-EINVAL). Fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL, so that userspace can verify keyblobs of this type. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]Holger Dengler
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced a new PKEY_TYPE_EP11_AES type for the PKEY_KBLOB2PROTK2 and a new IOCTL, PKEY_KBLOB2PROTK3, which both allows userspace to convert opaque securekey blobs of this type into protectedkey blobs. Unfortunately, all PKEY_KBLOB2PROTK2 and PKEY_KBLOB2PROTK3 IOCTL requests with this keyblobs of this type return with an error (-EINVAL). Fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK2 and PKEY_KBLOB2PROTK3 IOCTLs, so that userspace can convert PKEY_TYPE_EP11_AES keyblobs into protectedkey blobs. Add a helper function to decode the start and size of the internal header as well as start and size of the keyblob payload of an existing keyblob. Also validate the length of header and keyblob, as well as the keyblob magic. Introduce another helper function, which handles a raw key wrapping request and do the keyblob decoding in the calling function. Remove all other header-related calculations. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_CLR2SECK2 IOCTLHolger Dengler
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_CLR2SECK2 IOCTL to convert an AES clearkey into a securekey of this type. Unfortunately, all PKEY_CLR2SECK2 IOCTL requests with type PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling for PKEY_TYPE_EP11_AES in PKEY_CLR2SECK2 IOCTL, so that userspace can convert clearkey blobs into PKEY_TYPE_EP11_AES securekey blobs. Cc: stable@vger.kernel.org # v5.10+ Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_GENSECK2 IOCTLHolger Dengler
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_GENSECK2 IOCTL, to enable userspace to generate securekey blobs of this type. Unfortunately, all PKEY_GENSECK2 IOCTL requests for PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling for PKEY_TYPE_EP11_AES in PKEY_GENSECK2 IOCTL, so that userspace can generate securekey blobs of this type. The start of the header and the keyblob, as well as the length need special handling, depending on the internal keyversion. Add a helper function that splits an uninitialized buffer into start and size of the header as well as start and size of the payload, depending on the requested keyversion. Do the header-related calculations and the raw genkey request handling in separate functions. Use the raw genkey request function for internal purposes. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-17s390/pkey: fix/harmonize internal keyblob headersHolger Dengler
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to PKEY_TYPE_EP11. All pkeys have an internal header/payload structure, which is opaque to the userspace. The header structures for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there is no reason, why different structures are used. In preparation to fix the keyversion handling in the broken PKEY IOCTLs, the same header structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This reduces the number of different code paths and increases the readability. Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-16s390/dcssblk: fix kernel crash with list_add corruptionGerald Schaefer
Commit fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") introduced new logic for gendisk association, requiring drivers to explicitly call dax_add_host() and dax_remove_host(). For dcssblk driver, some dax_remove_host() calls were missing, e.g. in device remove path. The commit also broke error handling for out_dax case in device add path, resulting in an extra put_device() w/o the previous get_device() in that case. This lead to stale xarray entries after device add / remove cycles. In the case when a previously used struct gendisk pointer (xarray index) would be used again, because blk_alloc_disk() happened to return such a pointer, the xa_insert() in dax_add_host() would fail and go to out_dax, doing the extra put_device() in the error path. In combination with an already flawed error handling in dcssblk (device_register() cleanup), which needs to be addressed in a separate patch, this resulted in a missing device_del() / klist_del(), and eventually in the kernel crash with list_add corruption on a subsequent device_add() / klist_add(). Fix this by adding the missing dax_remove_host() calls, and also move the put_device() in the error path to restore the previous logic. Fixes: fb08a1908cb1 ("dax: simplify the dax_device <-> gendisk association") Cc: <stable@vger.kernel.org> # 5.17+ Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-16s390/mm: make virt_to_pfn() a static inlineLinus Walleij
Making virt_to_pfn() a static inline taking a strongly typed (const void *) makes the contract of a passing a pointer of that type to the function explicit and exposes any misuse of the macro virt_to_pfn() acting polymorphic and accepting many types such as (void *), (unitptr_t) or (unsigned long) as arguments without warnings. For symmetry do the same with pfn_to_virt() reflecting the current layout in asm-generic/page.h. Doing this reveals a number of offenders in the arch code and the S390-specific drivers, so just bite the bullet and fix up all of those as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Link: https://lore.kernel.org/r/20230812-virt-to-phys-s390-v2-1-6c40f31fe36f@linaro.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-08-11tty: make tty_operations::write()'s count size_tJiri Slaby (SUSE)
Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: propagate u8 data to tty_operations::put_char()Jiri Slaby (SUSE)
Data are now typed as u8. Propagate this change to tty_operations::put_char(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Link: https://lore.kernel.org/r/20230810091510.13006-29-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-11tty: propagate u8 data to tty_operations::write()Jiri Slaby (SUSE)
Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-03Merge tag 'net-6.5-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and wireless. Nothing scary here. Feels like the first wave of regressions from v6.5 is addressed - one outstanding fix still to come in TLS for the sendpage rework. Current release - regressions: - udp: fix __ip_append_data()'s handling of MSG_SPLICE_PAGES - dsa: fix older DSA drivers using phylink Previous releases - regressions: - gro: fix misuse of CB in udp socket lookup - mlx5: unregister devlink params in case interface is down - Revert "wifi: ath11k: Enable threaded NAPI" Previous releases - always broken: - sched: cls_u32: fix match key mis-addressing - sched: bind logic fixes for cls_fw, cls_u32 and cls_route - add bound checks to a number of places which hand-parse netlink - bpf: disable preemption in perf_event_output helpers code - qed: fix scheduling in a tasklet while getting stats - avoid using APIs which are not hardirq-safe in couple of drivers, when we may be in a hard IRQ (netconsole) - wifi: cfg80211: fix return value in scan logic, avoid page allocator warning - wifi: mt76: mt7615: do not advertise 5 GHz on first PHY of MT7615D (DBDC) Misc: - drop handful of inactive maintainers, put some new in place" * tag 'net-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (98 commits) MAINTAINERS: update TUN/TAP maintainers test/vsock: remove vsock_perf executable on `make clean` tcp_metrics: fix data-race in tcpm_suck_dst() vs fastopen tcp_metrics: annotate data-races around tm->tcpm_net tcp_metrics: annotate data-races around tm->tcpm_vals[] tcp_metrics: annotate data-races around tm->tcpm_lock tcp_metrics: annotate data-races around tm->tcpm_stamp tcp_metrics: fix addr_same() helper prestera: fix fallback to previous version on same major version udp: Fix __ip_append_data()'s handling of MSG_SPLICE_PAGES net/mlx5e: Set proper IPsec source port in L4 selector net/mlx5: fs_core: Skip the FTs in the same FS_TYPE_PRIO_CHAINS fs_prio net/mlx5: fs_core: Make find_closest_ft more generic wifi: brcmfmac: Fix field-spanning write in brcmf_scan_params_v2_to_v1() vxlan: Fix nexthop hash size ip6mr: Fix skb_under_panic in ip6mr_cache_report() s390/qeth: Don't call dev_close/dev_open (DOWN/UP) net: tap_open(): set sk_uid from current_fsuid() net: tun_chr_open(): set sk_uid from current_fsuid() net: dcb: choose correct policy to parse DCB_ATTR_BCN ...
2023-08-02Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small fixes, all in drivers" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
2023-08-02s390/qeth: Don't call dev_close/dev_open (DOWN/UP)Alexandra Winter
dev_close() and dev_open() are issued to change the interface state to DOWN or UP (dev->flags IFF_UP). When the netdev is set DOWN it loses e.g its Ipv6 addresses and routes. We don't want this in cases of device recovery (triggered by hardware or software) or when the qeth device is set offline. Setting a qeth device offline or online and device recovery actions call netif_device_detach() and/or netif_device_attach(). That will reset or set the LOWER_UP indication i.e. change the dev->state Bit __LINK_STATE_PRESENT. That is enough to e.g. cause bond failovers, and still preserves the interface settings that are handled by the network stack. Don't call dev_open() nor dev_close() from the qeth device driver. Let the network stack handle this. Fixes: d4560150cb47 ("s390/qeth: call dev_close() during recovery") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes that should go into the current kernel release, mainly: - Set of fixes for dasd (Stefan) - Handle interruptible waits returning because of a signal for ublk (Ming)" * tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux: ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV ublk: fail to recover device if queue setup is interrupted ublk: fail to start device if queue setup is interrupted block: Fix a source code comment in include/uapi/linux/blkzoned.h s390/dasd: print copy pair message only for the correct error s390/dasd: fix hanging device after request requeue s390/dasd: use correct number of retries for ERP requests s390/dasd: fix hanging device after quiesce/resume
2023-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25s390/lcs: Remove FDDI optionAlexandra Winter
The last s390 machine that supported FDDI was z900 ('7th generation', released in 2000). The oldest machine generation currently supported by the Linux kernel is MARCH_Z10 (released 2008). If there is still a usecase for connecting a Linux on s390 instance to a LAN Channel Station (LCS), it can only do so via Ethernet. Randy Dunlap[1] found that LCS over FDDI has never worked, when FDDI was compiled as module. Instead of fixing that, remove the FDDI option from the lcs driver. While at it, make the CONFIG_LCS description a bit more helpful. References: [1] https://lore.kernel.org/netdev/20230621213742.8245-1-rdunlap@infradead.org/ Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230724131546.3597001-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-25scsi: zfcp: Defer fc_rport blocking until after ADISC responseSteffen Maier
Storage devices are free to send RSCNs, e.g. for internal state changes. If this happens on all connected paths, zfcp risks temporarily losing all paths at the same time. This has strong requirements on multipath configuration such as "no_path_retry queue". Avoid such situations by deferring fc_rport blocking until after the ADISC response, when any actual state change of the remote port became clear. The already existing port recovery triggers explicitly block the fc_rport. The triggers are: on ADISC reject or timeout (typical cable pull case), and on ADISC indicating that the remote port has changed its WWPN or the port is meanwhile no longer open. As a side effect, this also removes a confusing direct function call to another work item function zfcp_scsi_rport_work() instead of scheduling that other work item. It was probably done that way to have the rport block side effect immediate and synchronous to the caller. Fixes: a2fa0aede07c ("[SCSI] zfcp: Block FC transport rports early on errors") Cc: stable@vger.kernel.org #v2.6.30+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Link: https://lore.kernel.org/r/20230724145156.3920244-1-maier@linux.ibm.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-07-25vfio-iommufd: Add detach_ioas support for emulated VFIO devicesYi Liu
This prepares for adding DETACH ioctl for emulated VFIO devices. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-16-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-24s390/dasd: print copy pair message only for the correct errorStefan Haberland
The DASD driver has certain types of requests that might be rejected by the storage server or z/VM because they are not supported. Since the missing support of the command is not a real issue there is no user visible kernel error message for this. For copy pair setups there is a specific error that IO is not allowed on secondary devices. This error case is explicitly handled and an error message is printed. The code checking for the error did use a bitwise 'and' that is used to check for specific bits. But in this case the whole sense byte has to match. This leads to the problem that the copy pair related error message is erroneously printed for other error cases that are usually not reported. This might heavily confuse users and lead to follow on actions that might disrupt application processing. Fix by checking the sense byte for the exact value and not single bits. Cc: stable@vger.kernel.org # 6.1+ Fixes: 1fca631a1185 ("s390/dasd: suppress generic error messages for PPRC secondary devices") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24s390/dasd: fix hanging device after request requeueStefan Haberland
The DASD device driver has a function to requeue requests to the blocklayer. This function is used in various cases when basic settings for the device have to be changed like High Performance Ficon related parameters or copy pair settings. The functions iterates over the device->ccw_queue and also removes the requests from the block->ccw_queue. In case the device is started on an alias device instead of the base device it might be removed from the block->ccw_queue without having it canceled properly before. This might lead to a hanging device since the request is no longer on a queue and can not be handled properly. Fix by iterating over the block->ccw_queue instead of the device->ccw_queue. This will take care of all blocklayer related requests and handle them on all associated DASD devices. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24s390/dasd: use correct number of retries for ERP requestsStefan Haberland
If a DASD request fails an error recovery procedure (ERP) request might be built as a copy of the original request to do error recovery. The ERP request gets a number of retries assigned. This number is always 256 no matter what other value might have been set for the original request. This is not what is expected when a user specifies a certain amount of retries for the device via sysfs. Correctly use the number of retries of the original request for ERP requests. Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24s390/dasd: fix hanging device after quiesce/resumeStefan Haberland
Quiesce and resume are functions that tell the DASD driver to stop/resume issuing I/Os to a specific DASD. On resume dasd_schedule_block_bh() is called to kick handling of IO requests again. This does unfortunately not cover internal requests which are used for path verification for example. This could lead to a hanging device when a path event or anything else that triggers internal requests occurs on a quiesced device. Fix by also calling dasd_schedule_device_bh() which triggers handling of internal requests on resume. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230721193647.3889634-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-07-24docs: move s390 under archCosta Shulyupin
and fix all in-tree references. Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230718045550.495428-1-costa.shul@redhat.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/mm: remove redundant check against VMEM_MAX_PHYSAlexander Gordeev
The value of ident_map_size could never exceed the value of vmemmap as secured by setup_kernel_memory_layout() function: /* make sure identity map doesn't overlay with vmemmap */ ident_map_size = min(ident_map_size, vmemmap_start); Since VMEM_MAX_PHYS macro is set to vmemmap and a newly added range is checked against ident_map_size in add_memory_merged() function anyway, the check against VMEM_MAX_PHYS is redundant. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/dcssblk: fix virtual vs physical address confusionAlexander Gordeev
Fix virtual vs physical address confusion (which currently are the same). Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/dcssblk: use IS_ALIGNED() for alignment checksAlexander Gordeev
Use IS_ALIGNED() instead of cumbersome bit manipulations. Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-07-24s390/zcrypt: remove CEX2 and CEX3 device driversHarald Freudenberger
Remove the legacy device driver code for CEX2 and CEX3 cards. The last machines which are able to handle CEX2 crypto cards are z10 EC first available 2008 and z10 BC first available 2009. The last machines able to handle a CEX3 crypto card are z196 first available 2010 and z114 first available 2011. Please note that this does not imply to drop CEX2 and CEX3 support in general. With older kernels on hardware up to the aforementioned machine models these crypto cards will get support by IBM. The removal of the CEX2 and CEX3 device drivers code opens up some simplifications, for example support for crypto cards without rng support can be removed also. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-15 18:12:29 +0000