summaryrefslogtreecommitdiff
path: root/drivers/soundwire
AgeCommit message (Collapse)Author
2020-05-20soundwire: intel: use a single moduleRander Wang
It's not clear why we have two modules for the Intel controller/master support when there is a single Kconfig. This adds complexity for no good reason, the two parts need to work together anyways. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200519191903.6557-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20soundwire: fix spelling mistakeVinod Koul
Fix typo for paranoia spelled as paranioa Fixes: bcac59029955 ("soundwire: add Slave sysfs support") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20soundwire: fix trailing line in sysfs_slave.cVinod Koul
Commit bcac59029955 ("soundwire: add Slave sysfs support") added trailing line in file sysfs_slave.c, so remove it Fixes: bcac59029955 ("soundwire: add Slave sysfs support") Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20soundwire: add Slave sysfs supportPierre-Louis Bossart
Expose MIPI DisCo Slave properties in sysfs. For Slave properties and Data Port 0, the attributes are managed with simple devm_ support. A Slave Device may have more than one Data Port (DPN), and each Data Port can be sink or source. The attributes are created dynamically using pre-canned macros, but still use devm_ with a name attribute group to avoid creating kobjects - as requested by GregKH. In the _show function, we use container_of() to retrieve port number and direction required to extract the information. Audio modes are not supported for now. Depending on the discussions the SoundWire Device Class, we may add it later as is or follow the new specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200518203551.2053-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20soundwire: master: add sysfs supportPierre-Louis Bossart
Add the master properties as attributes. The description is directly derived from the MIPI DisCo specification. Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200518203551.2053-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-20soundwire: disco: s/ch/channels/Pierre-Louis Bossart
Use more meaningful member names in preparation for sysfs support. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200518203551.2053-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: master: add runtime pm supportBard Liao
We need to enable runtime_pm on master device with generic helpers, so that a Slave-initiated wake is propagated to the bus parent. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: bus_type: add sdw_master_device supportPierre-Louis Bossart
In the existing SoundWire code, Master Devices are not explicitly represented - only SoundWire Slave Devices are exposed (the use of capital letters follows the SoundWire specification conventions). With the existing code, the bus is handled without using a proper device, and bus->dev typically points to a platform device. The right thing to do as discussed in multiple reviews is use a device for each bus. The sdw_master_device addition is done with minimal internal plumbing and not exposed externally. The existing API based on sdw_bus_master_add() and sdw_bus_master_delete() will deal with the sdw_master_device life cycle, which minimizes changes to existing drivers. Note that the Intel code will be modified in follow-up patches (no impact on any platform since the connection with ASoC is not supported upstream so far). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: bus: add unique bus idBard Liao
Adding an unique id for each bus. Suggested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: bus_type: introduce sdw_slave_type and sdw_master_typePierre-Louis Bossart
this is a preparatory patch before the introduction of the sdw_master_type. The SoundWire slave support is slightly modified with the use of a sdw_slave_type, and the uevent handling move to slave.c (since it's not necessary for the master). No functionality change other than moving code around. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-19soundwire: bus: rename sdw_bus_master_add/delete, add argumentsPierre-Louis Bossart
In preparation for future extensions, rename functions to use sdw_bus_master prefix and add a parent and fwnode argument to sdw_bus_master_add to help with device registration in follow-up patches. No functionality change, just renames and additional arguments. The Intel code is currently unused, the two additional arguments are only needed for compilation. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20200518174322.31561-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11soundwire: intel: (cosmetic) remove multiple superfluous "else" statementsGuennadi Liakhovetski
No need for an "else" after a "return" statement. Remove multiple such occurrences in Intel-specific code. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200508003046.23162-3-guennadi.liakhovetski@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11soundwire: (cosmetic) remove multiple superfluous "else" statementsGuennadi Liakhovetski
No need for an "else" after a "return" statement. Remove multiple such occurrences in bus.c. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200508003046.23162-2-guennadi.liakhovetski@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-11soundwire: qcom: Use IRQF_ONESHOTSamuel Zou
Fixes coccicheck error: drivers/soundwire/qcom.c:815:7-32: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Samuel Zou <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1588735553-34219-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05soundwire: bus: reduce verbosity on enumerationPierre-Louis Bossart
No need to repeat the same info log on all enumerations (essentially each power-up), keep it as debug information. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200419185117.4233-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05soundwire: debugfs: clarify SDPX license with GPL-2.0-onlyPierre-Louis Bossart
Follow recommendation to use GPL-2.0-only Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200419185117.4233-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05soundwire: slave: don't init debugfs on device registration errorPierre-Louis Bossart
The error handling flow seems incorrect, there is no reason to try and add debugfs support if the device registration did not succeed. Return on error. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20200419185117.4233-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-05soundwire: qcom: fix error handling in probePierre-Louis Bossart
Make sure all error cases are properly handled and all resources freed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200429185057.12810-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-20soundwire: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI ↵Kuninori Morimoto
pointer Now ALSA SoC needs to use asoc_rtd_to_codec(), otherwise, it will be compile error. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y2qqvdxu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-03-20Merge branch 'topic/ro_wordlength' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into asoc-5.7
2020-03-20soundwire: qcom: add support for get_sdw_stream()Srinivas Kandagatla
Adding support to new get_sdw_stream() that can help machine driver to deal with soundwire stream. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200317092645.5705-1-srinivas.kandagatla@linaro.org [fix checkpatch error for "void * qcom_swrm_get_sdw_stream"] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-20Merge branch 'topic/ro_wordlength' into nextVinod Koul
2020-03-20soundwire: stream: Add read_only_wordlength flag to port propertiesSrinivas Kandagatla
According to SoundWire Specification Version 1.2. "A Data Port number X (in the range 0-14) which supports only one value of WordLength may implement the WordLength field in the DPX_BlockCtrl1 Register as Read-Only, returning the fixed value of WordLength in response to reads." As WSA881x interfaces in PDM mode making the only field "WordLength" in DPX_BlockCtrl1" fixed and read-only. Behaviour of writing to this register on WSA881x soundwire slave with Qualcomm Soundwire Controller is throwing up an error. Not sure how other controllers deal with writing to readonly registers, but this patch provides a way to avoid writes to DPN_BlockCtrl1 register by providing a read_only_wordlength flag in struct sdw_dpn_prop Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200311113545.23773-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: clear FIFO to avoid pop noise issue on playback startranderwang
Driver should clear FIFO in PDI, or the previously stored sample data in FIFO will generate pop noise when stream is started. The soft reset bit will clear all the FIFO to zero and is self-cleared after that. Signed-off-by: randerwang <rander.wang@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-18-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: multi-link supportPierre-Louis Bossart
Enable multi-link (aka multi-master configuration). In this configuration, updates and commands with the 'ssp_sync' tag will be deferred and controlled by the gsync hardware signal. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-17-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: commit changes in the exit_reset() sequencePierre-Louis Bossart
Follow recommended flows, the BUS_RESET must be programmed before the UPDATE_CONFIG. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-16-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: remove automatic command retriesPierre-Louis Bossart
This is a good idea on paper, but it's not recommended at all when operating in multi-master mode. It's also not recommended when doing bank switches, since the retransmission would happen at the next SSP, and the command protocol is stuck in the mean time. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-15-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: remove PREQ_DELAY assignmentPierre-Louis Bossart
The hardware default is 0x1F, and the existing code does an OR with 0xF. This is a no-op, remove. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-14-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: enable NORMAL operation in cdns_init()Pierre-Louis Bossart
Follow recommended programming sequences, this needs to be enabled before the reset sequence. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-13-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: reorder MCP_CONFIG settingsPierre-Louis Bossart
Follow hardware programming flows and add placeholder comment for multi-master mode. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-12-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: make SSP interval programmablePierre-Louis Bossart
In multi-master mode, the IP will only accept SSP intervals with integer relationships between the frame rate and the gsync frequency. E.g for a 48kHz frame rate and 4 kHz gsync signal, the SSP interval can only be 1, 2, 3, 4, 6, 12. To simplify we only allow one SSP per gsync interval. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: move clock/SSP related inits to dedicated functionPierre-Louis Bossart
This helps isolate code and align with recommended programming flows Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: merge routines to clear/set bitsPierre-Louis Bossart
Use a single loop to wait for hardware to set/clear fields. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: mask Slave interrupt before stopping clockPierre-Louis Bossart
Intel QA reported a very rare case, possibly hardware-dependent, where a Slave can become UNATTACHED during a clock stop sequence, which leads to timeouts and failed suspend sequences. This patch suppresses the handling of all Slave events while this transition happens. The two cases that matter are: a) alerts: if the Slave wants to signal an alert condition, it can do so using the in-band wake, so there's almost no impact with this patch. b) sync loss or imp-def reset: in those cases, bringing back the Slave to functional state requires a complete re-enumeration. It's better to just ignore this case and restart cleanly, rather than attempt a 'clean' suspend. Validation results show the timeouts no longer visible with this patch. GitHub issue: https://github.com/thesofproject/linux/issues/1678 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-8-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: fix a io timeout issue in S3 testRander Wang
After system resumes from S3, io timeout occurs when setting one unused master on Comet Lake platform. In this case, the master is reset to default state, and FIFOLEVEL is reset to default value, but msg_count used for tracing FIFOLEVEL is still with old value, so FIFOLEVEL will not be set if a new msg FIFO usage is equal to the old msg_count. This patch updates msg_count to default value of FIFOLEVEL when resetting master. Tested on Comet Lake platform. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-7-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: add clock_stop/restart routinesRander Wang
Add support for clock stop and restart, with two configuration parameters: 1) when entering the ClockStop mode, Slave-initiated wakes can be prevented. 2) When exiting the ClockStop mode, the caller can request a Bus Reset (either if all Slaves were configured in ClockStopMode1 or the Master IP lost context and enumeration is required) The code handles the case where no Slaves are present by configuring the IP to treat COMMAND_IGNORED as success. The exit_reset part can be dealt with in the caller, along with the required syncArm/syncGo sequence in multi-link mode. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: handle error cases with CONFIG_UPDATEPierre-Louis Bossart
config_update() may time out or cannot be use in ClockStopMode Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: add interface to check clock statusRander Wang
If master is in clock stop state, driver can't modify registers in master except the registers for clock stop setting. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: simplifiy cdns_init()Rander Wang
There is no need for the clock_stop_exit argument with the latest implementation Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-19soundwire: cadence: s/update_config/config_updatePierre-Louis Bossart
Somehow we inverted the two, align with register definition to avoid further confusion. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200317163329.25501-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-13soundwire: stream: use sdw_write instead of updateSrinivas Kandagatla
There is no point in using update for registers with write mask as 0xFF, this adds unnecessary traffic on the bus. Just use sdw_write directly. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200312100105.5293-1-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-10ASoC: qcom: use for_each_rtd_codecs/cpus_dai() macroKuninori Morimoto
This patch switch to use plural form macro. - for_each_rtd_codec_dai() + for_each_rtd_codec_dais() - for_each_rtd_codec_dai_rollback() + for_each_rtd_codec_dais_rollback() - for_each_rtd_cpu_dai() + for_each_rtd_cpu_dais() - for_each_rtd_cpu_dai_rollback() + for_each_rtd_cpu_dais_rollback() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/87wo7ugogy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-03-03soundwire: bus: provide correct return value on errorBard Liao
It seems to be a typo. It makes more sense to return the return value of sdw_update() instead of the value we want to update. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200227220949.4013-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26Merge branch 'topic/asoc' into nextVinod Koul
2020-02-26soundwire: add helper macros for devID fieldsPierre-Louis Bossart
Move bit extractors to macros, so that the definitions can be used by other drivers parsing the MIPI definitions extracted from firmware tables (ACPI or DT). Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200225170041.23644-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-26soundwire: cadence: remove useless prototypesPierre-Louis Bossart
These prototypes are no longer used, remove. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200225170041.23644-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: don't treat CMD_IGNORED as error on ClockStopPierre-Louis Bossart
If a SoundWire link is enabled, but there are no Slave devices exposed in firmware tables for this link, or no Slaves in ATTACHED or ALERT mode, the CMD_IGNORED/-ENODATA error code on a broadcast write is perfectly legit. Filter this case to report errors and let the caller deal with the CMD_IGNORED case. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: add clock stop helpersRander Wang
SoundWire supports two clock stop modes. Add support to handle the clock stop modes and add pm_runtime calls in the bus. Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah. Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-25soundwire: bus: fix io error when processing alert eventRander Wang
There are two types of io errors when processing alert event. a) the Master detects an ALERT status for e.g. a jack event and invokes the implementation-defined function in the Slave driver to check the jack status. At this time the codec is just suspended, so io registers can't be accessed. b) when waking up from clock stop mode1 state, where the bus needs a complete re-enumeration, Slave registers can't be accessed until the enumeration is complete. This patch resumes the Slave device and waits for initialization complete when processing slave alert event, so that registers on the Slave can be accessed without timeouts or io errors. Signed-off-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200115000844.14695-9-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 21:35:35 +0000