| Age | Commit message (Collapse) | Author |
|---|
|
In the match() callback, the struct device_driver * should not be
changed, so change the function callback to be a const *. This is one
step of many towards making the driver core safe to have struct
device_driver in read-only memory.
Because the match() callback is in all busses, all busses are modified
to handle this properly. This does entail switching some container_of()
calls to container_of_const() to properly handle the constant *.
For some busses, like PCI and USB and HV, the const * is cast away in
the match callback as those busses do want to modify those structures at
this point in time (they have a local lock in the driver structure.)
That will have to be changed in the future if they wish to have their
struct device * in read-only-memory.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/2024070136-wrongdoer-busily-01e8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use SPI common DT binding properties 'spi-cs-setup-delay-ns' and
'spi-cs-hold-delay-ns'. If these properties do not exist, fall back to
legacy 'fsl,spi-cs-sck-delay' and 'fsl,spi-sck-cs-delay'.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240624-ls_qspi-v4-1-3d1c6f5005bf@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On the OMAPL138, the SPI reference clock is provided by the Power and
Sleep Controller (PSC). The PSC's datasheet says that 'some peripherals
have special programming requirements and additional recommended steps
you must take before you can invoke the PSC module state transition'. I
didn't find more details in documentation but it appears that PSC needs
the SPI to clear the POWERDOWN bit before disabling the clock. Indeed,
when this bit is set, the PSC gets stuck in transitions from enable to
disable state.
Clear the POWERDOWN bit when releasing driver's resources
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20240624071745.17409-1-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
platform_get_drvdata() is never called in the AXI SPI Engine driver, so
platform_set_drvdata() is not needed. Remove it. This also lets us
avoid the final error check in the probe function.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240626-spi-axi-spi-engine-remove-drvdata-v1-1-1752e372dd5d@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After coverting to SYSTEM_SLEEP_PM_OPS, it is necessary to pass pm_ptr()
to the PM operations.
Fix it accordingly.
Fixes: 6765e859fac9 ("spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240625183919.368770-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After coverting to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS, it is necessary
to pass pm_ptr() to the PM operations.
Fix it accordingly.
Fixes: a93f089ccf82 ("spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240625183919.368770-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
In the IIO subsystem, we are finding that it is common to call
spi_optimize_message() during driver probe since the SPI message
doesn't change for the lifetime of the driver. This patch adds a
devm_spi_optimize_message() helper to simplify this common pattern.
|
|
Replace SET_SYSTEM_SLEEP_PM_OPS with its modern SYSTEM_SLEEP_PM_OPS()
alternative.
The combined usage of pm_ptr() and SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240625002023.228235-2-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.
The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.
This allows removing the __maybe_unused notation from the runtime
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240625002023.228235-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_spi_optimize_message() is a public function and needs
EXPORT_SYMBOL_GPL.
Reported-by: Jonathan Cameron <jic23@kernel.org>
Closes: https://lore.kernel.org/linux-iio/20240624204424.6a91a5e4@jic23-huawei/
Fixes: d4a0055fdc22 ("spi: add devm_spi_optimize_message() helper")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240624-devm_spi_optimize_message-v2-1-58155c0180c2@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The sleep calculation was not taking into account increased delay when
the SPI device is not running at the maximum SCLK frequency.
Rounding down when one SCLK tick was the same as the instruction
execution time was fine, but it rounds down too much when SCLK is
slower. This changes the rounding to round up instead while still
taking into account the instruction execution time so that small
delays remain accurate.
Fixes: be9070bcf670 ("spi: axi-spi-engine: fix sleep ticks calculation")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240620-spi-axi-spi-engine-fix-sleep-time-v1-1-b20b527924a0@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was
claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective
device trees don't add DMA channels. The Reference manuals of i.MX31 and
i.MX25 also don't mention the CSPI core being DMA capable. (I didn't
check the others.)
Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed
DMA channel requests") this results in an error message
spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel!
during boot. However that isn't fatal and the driver gets loaded just
fine, just without using DMA.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://patch.msgid.link/20240508095610.2146640-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
In the IIO subsystem, we are finding that it is common to call
spi_optimize_message() during driver probe since the SPI message
doesn't change for the lifetime of the driver. This patch adds a
devm_spi_optimize_message() helper to simplify this common pattern.
|
|
This adds a new helper function devm_spi_optimize_message() that
automatically registers spi_unoptimize_message() to be called
when the device is removed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240621-devm_spi_optimize_message-v1-2-3f9dcba6e95e@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While in commit 2dd33f9cec90 ("spi: imx: support DMA for imx35") it was
claimed that DMA works on i.MX25, i.MX31 and i.MX35 the respective
device trees don't add DMA channels. The Reference manuals of i.MX31 and
i.MX25 also don't mention the CSPI core being DMA capable. (I didn't
check the others.)
Since commit e267a5b3ec59 ("spi: spi-imx: Use dev_err_probe for failed
DMA channel requests") this results in an error message
spi_imx 43fa4000.spi: error -ENODEV: can't get the TX DMA channel!
during boot. However that isn't fatal and the driver gets loaded just
fine, just without using DMA.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://patch.msgid.link/20240508095610.2146640-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
OEMs can connect a number of types of speakers to the sidecar cs35l56
amplifiers and a different speaker requires a different firmware
configuration.
When the cs42l43 ACPI includes a property indicating a particular type
of speaker has been installed this should be passed to the cs35l56
driver instances as a device property.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240619121703.3411989-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240619121703.3411989-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the fixes to apply new changes to the Cirrus drivers.
|
|
The patch 15a6af94a277 ("spi: Increase imx51 ecspi burst length based
on transfer length") increased the burst length calculation in
mx51_ecspi_prepare_transfer() to be based on the transfer length.
This breaks HW CS + SPI_CS_WORD support which was added in
6e95b23a5b2d ("spi: imx: Implement support for CS_WORD") and transfers
with bits-per-word != 8, 16, 32.
SPI_CS_WORD means the CS should be toggled after each word. The
implementation in the imx-spi driver relies on the fact that the HW CS
is toggled automatically by the controller after each burst length
number of bits. Setting the burst length to the number of bits of the
_whole_ message breaks this use case.
Further the patch 15a6af94a277 ("spi: Increase imx51 ecspi burst
length based on transfer length") claims to optimize the transfers.
But even without this patch, on modern spi-imx controllers with
"dynamic_burst = true" (imx51, imx6 and newer), the transfers are
already optimized, i.e. the burst length is dynamically adjusted in
spi_imx_push() to avoid the pause between the SPI bursts. This has
been confirmed by a scope measurement on an imx6d.
Subsequent Patches tried to fix these and other problems:
- 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
- e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
- c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
- cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
but the HW CS + SPI_CS_WORD use case is still broken.
To fix the problems revert the burst size calculation in
mx51_ecspi_prepare_transfer() back to the original form, before
15a6af94a277 ("spi: Increase imx51 ecspi burst length based on
transfer length") was applied.
Cc: Stefan Moring <stefan.moring@technolution.nl>
Cc: Stefan Bigler <linux@bigler.io>
Cc: Clark Wang <xiaoning.wang@nxp.com>
Cc: Carlos Song <carlos.song@nxp.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Thorsten Scherer <T.Scherer@eckelmann.de>
Fixes: 15a6af94a277 ("spi: Increase imx51 ecspi burst length based on transfer length")
Fixes: 5f66db08cbd3 ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Fixes: e9b220aeacf1 ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: c712c05e46c8 ("spi: imx: fix the burst length at DMA mode and CPU mode")
Fixes: cf6d79a0f576 ("spi: spi-imx: fix off-by-one in mx51 CPU mode burst length")
Link: https://lore.kernel.org/all/20240618-oxpecker-of-ideal-mastery-db59f8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://msgid.link/r/20240618-spi-imx-fix-bustlength-v1-1-2053dd5fdf87@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When spi-cadence is configured as a slave, it requires the SPI refclk to
detect the synchronization start condition while communicating with the
master. However, the spi-cadence driver never enables the SPI refclk in
slave mode, causing the refclk to remain disabled if the
"clk_ignore_unused" kernel parameter is not passed through bootargs.
As a result, the slave cannot detect data sent by the master, leading to
communication failure. Update driver to enable the SPI refclk in both
master and slave configurations.
Fixes: b1b90514eaa3 ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20240617153837.29861-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While adding a SPI device, the SPI core ensures that multiple logical CS
doesn't map to the same physical CS. For example, spi->chip_select[0] !=
spi->chip_select[1] and so forth. However, unlike the SPI master, the SPI
slave doesn't have the list of chip selects, this leads to probe failure
when the SPI controller is configured as slave. Update the
__spi_add_device() function to perform this check only if the SPI
controller is configured as master.
Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core")
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://msgid.link/r/20240617153052.26636-1-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor accessing the SDCA extension properties to make it easier to
access multiple properties to assist with future features. Return the
node itself and allow the caller to read the actual properties.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240611132556.1557075-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add OCTAL mode support.
Issue detected using "--octal" spidev_test's option.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-4-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In case usage of OCTAL mode, buswidth parameter can take the value 8.
As return value of stm32_qspi_get_mode() is used to configure fields
of CCR registers that are 2 bits only (fields IMODE, ADMODE, ADSIZE,
DMODE), clamp return value of stm32_qspi_get_mode() to 4.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-3-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Misplaced parenthesis make test of mode wrong in case mode is equal to
SPI_TX_OCTAL or SPI_RX_OCTAL.
Simplify this sanity test, if one of this bit is set, property
cs-gpio must be present in DT.
Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")
Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://msgid.link/r/20240618132951.2743935-2-patrice.chotard@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add spicc loopback mode for debugging convenience.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240612-spi_lbc-v1-1-d52e8c8011bd@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
The first part of the series (patches 1 to 7) is an introduction
of a new helper followed by the user conversion.
This consolidates the same code and also makes patch 8 (last one)
be localised to the SPI core part.
The last patch is the main rework to get rid of a recently introduced
hack with a dummy SG list and move to the transfer-based DMA mapped
flag.
That said, the patches 1 to 7 may be applied right away since they
have no functional change intended, while the last one needs more
testing and reviewing.
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-altera-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-fsl-lib.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-omap2-mcspi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spi/spi-qup.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240609-md-drivers-spi-v1-1-1c7444f53cde@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add SPI clock flag CLK_SET_RATE_PARENT for using pclk as parent clock.
This gives SPI more flexibility in frequency selection.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Link: https://lore.kernel.org/r/20240524-spi_pclk_setparent-v1-1-99e0ce70b66f@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The granularity of DMA mappings is transfer and moreover,
the direction is also important as it can be unidirect.
The current cur_msg_mapped flag doesn't fit well the DMA mapping
and syncing calls and we have tons of checks around on top of it.
So, instead of doing that rework the code to use per transfer per
direction flag to show if it's DMA mapped or not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-9-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-8-andriy.shevchenko@linux.intel.com
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-7-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-6-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-5-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace a few lines of code by calling a spi_xfer_is_dma_mapped() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-3-andriy.shevchenko@linux.intel.com
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are few drivers that use the same pattern to check if the transfer
is DMA mapped or not. Provide a helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240531194723.1761567-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some internals of the cs35l56 can only support SPI speeds of up to
11MHz. Whilst some use-cases could support higher rates, keep things
simple by dropping the SPI speed down to this avoid any potential
issues.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240607103423.4159834-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The root clock is actually 49.152MHz not 40MHz, as it is derived from
the primary audio clock, update the driver to match. This error can
cause the actual clock rate to be higher than the requested clock rate
on the SPI bus.
Fixes: ef75e767167a ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240604131704.3227500-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
PCI driver has an additional device layer for enumeration.
Remove that layer and use spi-pxa2xx code directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The spi-pxa2xx.c is bloated with a platform driver code while
pretending to provide a core functionality. Make it real core
library by splitting out the platform driver to a separate file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In preparation of the extracting platform driver from spi-pxa2xx.c
split the probe and remove functions so we have bus independent
and platform device ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pxa2xx_spi_fw_translate_cs() checks for the ACPI companion device
presence along with the SSP type. But the SSP type is uniquely
determines the case. Hence remove the superflous check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The mmio_base can't be NULL at this point. It's either checked
in both pxa_ssp_probe() and pxa2xx_spi_init_ssp() or correctly
provided by PCI core. Hence, remove duplicate check which is
a dead code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Print DMA burst size only when DMA is enabled to avoid making
a false impression that DMA is enabled when it may be not.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove hard coded number of chip select pins for Intel Braswell.
This comes via property.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since the ACPI enumerated devices provide a property with SSP type,
there is no more necessity to bear the copy of them in the ID table.
Drop the driver data in ACPI ID table.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The old Intel platforms, such as Intel Braswell, also provide
the property of SSP type. Reorganize the pxa2xx_spi_init_pdata()
to take that into account.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In the error path or remove path the reference counter in PXA SSP driver
may be dropped before the other resources, that were allocated after
bumbing the reference counter. This breaks reversed order of freeing and
might have an undesired side effects. Prevent this from happening by
wrapping pxa_ssp_request() to be device managed resource.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240530151117.1130792-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
