| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/aquantia/aquantia.h
219343755eae ("net: phy: aquantia: add missing include guards")
61578f679378 ("net: phy: aquantia: add support for PHY LEDs")
drivers/net/ethernet/wangxun/libwx/wx_hw.c
bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx")
b501d261a5b3 ("net: txgbe: add FDIR ATR support")
https://lore.kernel.org/all/20240703112936.483c1975@canb.auug.org.au/
include/linux/mlx5/mlx5_ifc.h
048a403648fc ("net/mlx5: IFC updates for changing max EQs")
99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO")
https://lore.kernel.org/all/20240701133951.6926b2e3@canb.auug.org.au/
Adjacent changes:
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference")
3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard")
include/net/mac80211.h
816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP")
5a009b42e041 ("wifi: mac80211: track changes in AP's TPE")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Highlights this time are:
- cfg80211/nl80211:
* improvements for 6 GHz regulatory flexibility
- mac80211:
* use generic netdev stats
* multi-link improvements/fixes
- brcmfmac:
* MFP support (to enable WPA3)
- wilc1000:
* suspend/resume improvements
- iwlwifi:
* remove support for older FW for new devices
* fast resume (keeping the device configured)
- wl18xx:
* support newer firmware versions
* tag 'wireless-next-2024-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (100 commits)
wifi: brcmfmac: of: Support interrupts-extended
wifi: brcmsmac: advertise MFP_CAPABLE to enable WPA3
net: rfkill: Correct return value in invalid parameter case
wifi: mac80211: fix NULL dereference at band check in starting tx ba session
wifi: iwlwifi: mvm: fix rs.h kernel-doc
wifi: iwlwifi: fw: api: datapath: fix kernel-doc
wifi: iwlwifi: fix remaining mistagged kernel-doc comments
wifi: iwlwifi: fix prototype mismatch kernel-doc warnings
wifi: iwlwifi: fix kernel-doc in iwl-fh.h
wifi: iwlwifi: fix kernel-doc in iwl-trans.h
wifi: iwlwifi: pcie: fix kernel-doc
wifi: iwlwifi: dvm: fix kernel-doc warnings
wifi: iwlwifi: mvm: don't log error for failed UATS table read
wifi: iwlwifi: trans: make bad state warnings
wifi: iwlwifi: fw: api: fix some kernel-doc
wifi: iwlwifi: mvm: remove init_dbg module parameter
wifi: iwlwifi: update the BA notification API
wifi: iwlwifi: mvm: always unblock EMLSR on ROC end
wifi: iwlwifi: mvm: use IWL_FW_CHECK for link ID check
wifi: iwlwifi: mvm: don't flush BSSes on restart with MLD API
...
====================
Link: https://patch.msgid.link/20240627114135.28507-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") adds a parameter to vchiq_debugfs_init, but leaves the
dummy implementation in the !CONFIG_DEBUG_FS case untouched, causing a
compile time error.
Fixes: c3552ab19aeb ("staging: vchiq_debugfs: Fix NPD in vchiq_dump_state")
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240627124419.2498642-1-bero@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This will allow the low level driver to take different actions for
different flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The vchiq_state used to be obtained through an accessor which would
validate that the VCHIQ had been initialised correctly with the remote,
or return a null state.
In commit 42a2f6664e18 ("staging: vc04_services: Move global g_state to
vchiq_state") the global state was moved to the vchiq_mgnt structures
stored as a vchiq instance specific context. This conversion removed the
helpers and instead replaced users of this helper with the assumption
that the state is always available and the remote connected.
The conversion does ensure that the state is always available, so some
remaining state null pointer checks that remain are unnecessary, but the
assumption that the remote is present and initialised is incorrect.
Fix this broken assumption by re-introducing the logic that was lost
during the conversion.
Fixes: 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240620221046.2731704-1-kieran.bingham@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
GPIO chips should be added with driver-private data associated with the
chip. If none is needed, NULL can be used. All users already do this
except one, fix that here. With no more users of the base gpiochip_add()
we can drop this function so no more users show up later.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240610135313.142571-1-afd@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
The commit 42a2f6664e18 ("staging: vc04_services: Move global g_state
to vchiq_state") falsely assumed that the debugfs entry vchiq/state
was created with vchiq_instance as data. This causes now a NULL
pointer derefence while trying to dump the vchiq state. So fix
this by passing vchiq_state as data, because this is the relevant
part here.
Fixes: 42a2f6664e18 ("staging: vc04_services: Move global g_state to vchiq_state")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240524151542.19415-1-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver changes for 6.10-rc1. Not a lot
of cleanups happening this kernel release, intern applications must be
out of sync at the moment. But we did delete two drivers, wlan-ng and
pi433, as they are no longer in use and the developers involved wanted
them just gone entirely, allowing us to drop 19k lines from the tree.
Other than the normal coding style cleanups here, there has been a lot
of work on the vc04_services code, with the intent to finally get that
out of staging hopefully soon. It's getting closer, which is nice to
see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (98 commits)
staging: pi433: Remove unused driver
staging: vchiq_core: Add missing blank lines
staging: vchiq_core: Drop unnecessary blank lines
staging: vchiq_core: Add parentheses to VCHIQ_MSG_SRCPORT
staging: vchiq_core: Use printk messages for devices
staging: vchiq_arm: Drop unnecessary NULL check
staging: vc04_services: Delete unnecessary NULL check
staging: vc04_services: vchiq_arm: Fix NULL ptr dereferences
Staging: rtl8192e: Rename variable DssCCk
Staging: rtl8192e: Rename variable ExtHTCapInfo
Staging: rtl8192e: Rename variable MPDUDensity
Staging: rtl8192e: Rename variable MaxRxAMPDUFactor
Staging: rtl8192e: Rename variable MaxAMSDUSize
Staging: rtl8192e: Rename variable DelayBA
Staging: rtl8192e: Rename variable RxSTBC
Staging: rtl8192e: Rename variable TxSTBC
Staging: rtl8192e: Rename variable GreenField
Staging: rtl8192e: Rename variable ShortGI20Mhz
Staging: rtl8192e: Rename variable ShortGI40Mhz
Staging: rtl8192e: Rename variable MimoPwrSave
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Fix-ups:
- FB Backlight interaction overhaul
- Remove superfluous code and simplify overall
- Constify various structs and struct attributes
Bug Fixes:
- Repair LED flickering
- Fix signedness bugs"
* tag 'backlight-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (42 commits)
backlight: sky81452-backlight: Remove unnecessary call to of_node_get()
backlight: mp3309c: Fix LEDs flickering in PWM mode
backlight: otm3225a: Drop driver owner assignment
backlight: lp8788: Drop support for platform data
backlight: lcd: Make lcd_class constant
backlight: Make backlight_class constant
backlight: mp3309c: Fix signedness bug in mp3309c_parse_fwnode()
const_structs.checkpatch: add lcd_ops
fbdev: omap: lcd_ams_delta: Constify lcd_ops
fbdev: imx: Constify lcd_ops
fbdev: clps711x: Constify lcd_ops
HID: picoLCD: Constify lcd_ops
backlight: tdo24m: Constify lcd_ops
backlight: platform_lcd: Constify lcd_ops
backlight: otm3225a: Constify lcd_ops
backlight: ltv350qv: Constify lcd_ops
backlight: lms501kf03: Constify lcd_ops
backlight: lms283gf05: Constify lcd_ops
backlight: l4f00242t03: Constify lcd_ops
backlight: jornada720_lcd: Constify lcd_ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
devm_regulator_get_enable_read_voltage()
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-6-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Marcus started a project in 2016 to bring the pi433 alive. One project
was funded successfully but the second not. So only a few pi433 got sold
to early adaptors during this time that ended late 2017. There is a
simple user space program available for a demo with the pi433 but that
does not use this driver.
The driver is unused since 2018. No description or user space application
to use it can be found. To bring it alive the device tree needs to be
adjusted manually.
The last patch reviewed by Marcus was in June 2018, last patch tested
was in July 2017.
No response since 27. March 2024 regarding the removal of the driver.
Remove unused driver because of the above named reasons.
Link: https://lore.kernel.org/linux-staging/c4c5ab38-8c67-4c21-86bc-f4f3c06be358@gmail.com/
Link: https://www.kickstarter.com/projects/1292669042/pi433-a-radio-module-funkmodul-for-raspberry-pi
Link: https://www.kickstarter.com/projects/1292669042/smarthome-pi/comments
Link: https://www.pi433.de/en.html
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Cc: Marcus Wolf <marcus.wolf@wolf-entwicklungen.de>
Link: https://lore.kernel.org/r/20240421195717.GA10943@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch.pl noticed about missing blank line after 2 declarations.
So add them for better readability.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240425165852.6681-6-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch.pl noticed
CHECK: Please don't use multiple blank lines
So drop them.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240425165852.6681-5-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
checkpatch.pl complains
ERROR: Macros with complex values should be enclosed in parentheses
+#define VCHIQ_MSG_SRCPORT(msgid) \
+ (unsigned short)(((unsigned int)(msgid) >> 12) & 0xfff)
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240425165852.6681-4-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that struct vchiq_state has a device reference, we can convert
the remaining printk message helpers.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240425165852.6681-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Looking at the handling of service instance within the VCHIQ
driver shows that it's not possible that service_callback is
called with instance is a NULL pointer. So drop the unnecessary
NULL check and fix:
vchiq_arm.c:1109 service_callback() warn:
variable dereferenced before check 'instance' (see line 1091)
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/linux-arm-kernel/202404230315.vx7ESZ3r-lkp@intel.com/
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240425165852.6681-2-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "state" pointer points to an offset in the middle of the "mgmt"
struct so it can't possibly be NULL. And also we dereferenced it on the
line before. So this NULL check is pointless. Delete it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/526ec2ff-6277-4d5d-b2d9-63b087a97c7c@moroto.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit 8c9753f63905 ("staging: vc04_services: vchiq_arm: Drop
g_cache_line_size") introduced NULL pointer dereferences by
using the wrong device.
Fixes: 8c9753f63905 ("staging: vc04_services: vchiq_arm: Drop g_cache_line_size")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240420091240.9552-1-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable DssCCk to dss_cck
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-19-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable ExtHTCapInfo to ext_ht_cap_info
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-18-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable MPDUDensity to mpdu_density
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-17-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable MaxRxAMPDUFactor to max_rx_ampdu_factor
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-16-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable MaxAMSDUSize to max_amsdu_size
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-15-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable DelayBA to delay_ba
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-14-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable RxSTBC to rx_stbc
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-13-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable TxSTBC to tx_stbc
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-12-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable GreenField to green_field
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-11-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable ShortGI20Mhz to short_gi_20mhz
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-10-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable ShortGI40Mhz to short_gi_40mhz
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-9-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable MimoPwrSave to mimo_pwr_save
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-8-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable AdvCoding to adv_coding
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-7-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable ChlWidth to chl_width
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-6-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable LSigTxopProtect to lsig_txop_protect
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-5-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable OptMode to opt_mode
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-4-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable CurrentAMPDUFactor to current_ampdu_factor
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-3-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename variable CurSTAExtChnlOffset to cur_sta_ext_chnl_offset
to fix checkpatch warning Avoid CamelCase.
Signed-off-by: Tree Davies <tdavies@darkphysics.net>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240428230106.6548-2-tdavies@darkphysics.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20240423173623.2748621-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Makes the code simpler and cocci happier:
drivers/staging/media/tegra-video/tegra20.c:324:44-45: WARNING opportunity for swap()
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-10-3c4865f5a4b0@chromium.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
platform_get_irq() already prints an error for us.
Found by cocci:
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c:389:2-9: line 389 is redundant because platform_get_irq() already prints an error
Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-7-3c4865f5a4b0@chromium.org
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The code to select isp_dev->formats[] is overly complicated. We can
just use the "pad" as the index. This will making adding new pads
easier in future patches. No functional change.
Link: https://lore.kernel.org/linux-media/20240312024520.11022-1-changhuang.liang@starfivetech.com
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Link: https://lore.kernel.org/linux-media/20231014143843.3409-1-ihor.matushchak@foobox.net
Signed-off-by: Ihor Matushchak <ihor.matushchak@foobox.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ipu3 driver requests firmware files but does not use the
MODULE_FIRMWARE macro to show them in the module metadata
[mchehab: add missing firmware file: IMGU_FW_NAME_IPU_20161208]
Link: https://lore.kernel.org/linux-media/20230914135100.19911-1-victor.gonzalo@anddroptable.net
Signed-off-by: Víctor Gonzalo <victor.gonzalo@anddroptable.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The macro parameter name, sd, captures the field name in the third
argument of container_of. Fortunately, the argument at all uses is
actually sd. But change the macro parameter name anyway, for a little
added safety.
Link: https://lore.kernel.org/linux-media/20230315090904.20092-1-Julia.Lawall@inria.fr
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
