summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2020-10-28usb: gadget: pxa27x_udc: Replace in_interrupt() usage in commentsAhmed S. Darwish
The usage of in_interrupt() in drivers is phased out for various reasons. Documenting calling contexts of functions with 'in_interrupt()' or '!in_interrupt()' is imprecise: For a function which might sleep the condition is preemptible task context, which is not what '!in_interrupt()' describes. Replace the context docummentation with plain text and make them match reality. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.636378243@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: core: Replace in_interrupt() in commentsAhmed S. Darwish
The usage of in_interrupt() in drivers is phased out for various reasons. Various comments use !in_interrupt() to describe calling context for functions which might sleep. That's wrong because the calling context has to be preemptible task context, which is not what !in_interrupt() describes. Replace !in_interrupt() with more accurate plain text descriptions. The comment for usb_hcd_poll_rh_status() is misleading as this function is called from all kinds of contexts including preemptible task context. Remove it as there is obviously no restriction. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.851821025@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: gadget: udc: Remove in_interrupt()/in_irq() from commentsAhmed S. Darwish
The usage of in_irq()/in_interrupt() in drivers is phased out for various reasons. The context description for usb_gadget_giveback_request() is misleading as in_interupt() means: hard interrupt or soft interrupt or bottom half disabled regions. But it's also invoked from task context when endpoints are torn down. Remove it as it's more confusing than helpful. Replace also the in_irq() comment with plain text. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.744172050@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28USB: host: ehci-pmcmsp: Cleanup usb_hcd_msp_remove()Thomas Gleixner
usb_hcd_msp_remove() has a pdev argument which isn't used and the function is used only within this file. Remove pdev and make usb_hcd_msp_remove() static. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201019101110.530302737@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: hosts: Remove in_interrupt() from commentsAhmed S. Darwish
The usage of in_interrupt() in drivers is phased out for various reasons. Various comments use !in_interrupt() to describe calling context for probe() and remove() functions. That's wrong because the calling context has to be preemptible task context, which is not what !in_interrupt() describes. Cleanup the comments. While at it add the missing kernel doc argument descriptors. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: linux-usb@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.439968251@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: atm: Replace in_interrupt() usage in commentThomas Gleixner
in_interrupt() is a pretty vague context description as it means: hard interrupt, soft interrupt or bottom half disabled regions. Replace the vague comment with a proper reasoning why spin_lock_irqsave() needs to be used. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Duncan Sands <duncan.sands@free.fr> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20201019101110.944939915@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28USB: sisusbvga: Make console support depend on BROKENThomas Gleixner
The console part of sisusbvga is broken vs. printk(). It uses in_atomic() to detect contexts in which it cannot sleep despite the big fat comment in preempt.h which says: Do not use in_atomic() in driver code. in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which means that spin/rw_lock held regions are not detected by it. There is no way to make this work by handing context information through to the driver and this only can be solved once the core printk infrastructure supports sleepable console drivers. Make it depend on BROKEN for now. Fixes: 1bbb4f2035d9 ("[PATCH] USB: sisusb[vga] update") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201019101109.603244207@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: Add driver to allow any GPIO to be used for 7211 USB signalsAl Cooper
The Broadcom 7211 has new functionality that allows some USB low speed side band signals, that go from the XHCI host controller to pins on the chip, to be remapped to use any GPIO pin instead of the limited set selectable by hardware. This can be done without changing the standard driver for the host controller. There is currently support for three USB signals, PWRON, VBUS_PRESENT and PWRFLT. This driver will allow the remapping of any of these three signals based on settings in the Device Tree node for the driver. The driver was written so that it could handle additional signals added in the future by just adding the correct properties to the DT node. Below is an example of a DT node that would remap all three signals: usb_pinmap: usb-pinmap@22000d0 { compatible = "brcm,usb-pinmap"; reg = <0x22000d0 0x4>; in-gpios = <&gpio 18 0>, <&gpio 19 0>; brcm,in-functions = "VBUS", "PWRFLT"; brcm,in-masks = <0x8000 0x40000 0x10000 0x80000>; out-gpios = <&gpio 20 0>; brcm,out-functions = "PWRON"; brcm,out-masks = <0x20000 0x800000 0x400000 0x200000>; interrupts = <0x0 0xb2 0x4>; }; Signed-off-by: Al Cooper <alcooperx@gmail.com> Link: https://lore.kernel.org/r/20201012200007.8862-3-alcooperx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: host: xhci-mem: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201026185812.1427461-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: storage: freecom: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201026190457.1428516-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: misc: iowarrior: remove unneeded breakTom Rix
A break is not needed if it is preceded by a goto. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201026192800.1431547-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: host: ehci-sched: add comment about find_tt() not returning errorSudip Mukherjee
Add a comment explaining why find_tt() will not return error even though find_tt() is checking for NULL and other errors. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20201011205008.24369-1-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28usb: cdns3: Variable 'length' set but not usedPawel Laszczak
Patch removes not used variable 'length' from cdns3_wa2_descmiss_copy_data function. Fixes: 141e70fef4ee ("usb: cdns3: gadget: need to handle sg case for workaround 2 case") Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2020-10-28USB: serial: option: add Quectel EC200T module supportZiyi Cao
Add usb product id of the Quectel EC200T module. Signed-off-by: Ziyi Cao <kernel@septs.pw> Link: https://lore.kernel.org/r/17f8a2a3-ce0f-4be7-8544-8fdf286907d0@www.fastmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-27usb: raw-gadget: fix memory leak in gadget_setupZqiang
When fetch 'event' from event queue, after copy its address space content to user space, the 'event' the memory space pointed to by the 'event' pointer need be freed. BUG: memory leak unreferenced object 0xffff888110622660 (size 32): comm "softirq", pid 0, jiffies 4294941981 (age 12.480s) hex dump (first 32 bytes): 02 00 00 00 08 00 00 00 80 06 00 01 00 00 40 00 ..............@. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000efd29abd>] kmalloc include/linux/slab.h:554 [inline] [<00000000efd29abd>] raw_event_queue_add drivers/usb/gadget/legacy/raw_gadget.c:66 [inline] [<00000000efd29abd>] raw_queue_event drivers/usb/gadget/legacy/raw_gadget.c:225 [inline] [<00000000efd29abd>] gadget_setup+0xf6/0x220 drivers/usb/gadget/legacy/raw_gadget.c:343 [<00000000952c4a46>] dummy_timer+0xb9f/0x14c0 drivers/usb/gadget/udc/dummy_hcd.c:1899 [<0000000074ac2c54>] call_timer_fn+0x38/0x200 kernel/time/timer.c:1415 [<00000000560a3a79>] expire_timers kernel/time/timer.c:1460 [inline] [<00000000560a3a79>] __run_timers.part.0+0x319/0x400 kernel/time/timer.c:1757 [<000000009d9503d0>] __run_timers kernel/time/timer.c:1738 [inline] [<000000009d9503d0>] run_timer_softirq+0x3d/0x80 kernel/time/timer.c:1770 [<000000009df27c89>] __do_softirq+0xcc/0x2c2 kernel/softirq.c:298 [<000000007a3f1a47>] asm_call_irq_on_stack+0xf/0x20 [<000000004a62cc2e>] __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] [<000000004a62cc2e>] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] [<000000004a62cc2e>] do_softirq_own_stack+0x32/0x40 arch/x86/kernel/irq_64.c:77 [<00000000b0086800>] invoke_softirq kernel/softirq.c:393 [inline] [<00000000b0086800>] __irq_exit_rcu kernel/softirq.c:423 [inline] [<00000000b0086800>] irq_exit_rcu+0x91/0xc0 kernel/softirq.c:435 [<00000000175f9523>] sysvec_apic_timer_interrupt+0x36/0x80 arch/x86/kernel/apic/apic.c:1091 [<00000000a348e847>] asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:631 [<0000000060661100>] native_safe_halt arch/x86/include/asm/irqflags.h:60 [inline] [<0000000060661100>] arch_safe_halt arch/x86/include/asm/irqflags.h:103 [inline] [<0000000060661100>] acpi_safe_halt drivers/acpi/processor_idle.c:111 [inline] [<0000000060661100>] acpi_idle_do_entry+0xc3/0xd0 drivers/acpi/processor_idle.c:517 [<000000003f413b99>] acpi_idle_enter+0x128/0x1f0 drivers/acpi/processor_idle.c:648 [<00000000f5e5afb8>] cpuidle_enter_state+0xc9/0x650 drivers/cpuidle/cpuidle.c:237 [<00000000d50d51fc>] cpuidle_enter+0x29/0x40 drivers/cpuidle/cpuidle.c:351 [<00000000d674baed>] call_cpuidle kernel/sched/idle.c:132 [inline] [<00000000d674baed>] cpuidle_idle_call kernel/sched/idle.c:213 [inline] [<00000000d674baed>] do_idle+0x1c8/0x250 kernel/sched/idle.c:273 Reported-by: syzbot+bd38200f53df6259e6bf@syzkaller.appspotmail.com Signed-off-by: Zqiang <qiang.zhang@windriver.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: dwc2: Avoid leaving the error_debugfs label unusedMartin Blumenstingl
The error_debugfs label is only used when either CONFIG_USB_DWC2_PERIPHERAL or CONFIG_USB_DWC2_DUAL_ROLE is enabled. Add the same #if to the error_debugfs label itself as the code which uses this label already has. This avoids the following compiler warning: warning: label ‘error_debugfs’ defined but not used [-Wunused-label] Fixes: e1c08cf23172ed ("usb: dwc2: Add missing cleanups when usb_add_gadget_udc() fails") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: dwc3: ep0: Fix delay status handlingThinh Nguyen
If we want to send a control status on our own time (through delayed_status), make sure to handle a case where we may queue the delayed status before the host requesting for it (when XferNotReady is generated). Otherwise, the driver won't send anything because it's not EP0_STATUS_PHASE yet. To resolve this, regardless whether dwc->ep0state is EP0_STATUS_PHASE, make sure to clear the dwc->delayed_status flag if dwc3_ep0_send_delayed_status() is called. The control status can be sent when the host requests it later. Cc: <stable@vger.kernel.org> Fixes: d97c78a1908e ("usb: dwc3: gadget: END_TRANSFER before CLEAR_STALL command") Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: gadget: fsl: fix null pointer checkingRan Wang
fsl_ep_fifo_status() should return error if _ep->desc is null. Fixes: 75eaa498c99e (“usb: gadget: Correct NULL pointer checking in fsl gadget”) Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27usb: gadget: goku_udc: fix potential crashes in probeEvgeny Novikov
goku_probe() goes to error label "err" and invokes goku_remove() in case of failures of pci_enable_device(), pci_resource_start() and ioremap(). goku_remove() gets a device from pci_get_drvdata(pdev) and works with it without any checks, in particular it dereferences a corresponding pointer. But goku_probe() did not set this device yet. So, one can expect various crashes. The patch moves setting the device just after allocation of memory for it. Found by Linux Driver Verification project (linuxtesting.org). Reported-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-27USB: serial: iuu_phoenix: remove unneeded breakTom Rix
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-27USB: serial: digi_acceleport: remove in_interrupt() usageAhmed S. Darwish
The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The debug printk() in digi_write() prints in_interrupt() as context information. This information is imprecise as it does not distinguish between hard-IRQ or disabled bottom half and it does not consider disabled interrupts or preemption. It is not really helpful. Remove the in_interrupt() printout. Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20201026140313.dpg3hkhkje2os4hw@linutronix.de [ johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-27usb: dwc3: pci: add support for the Intel Alder Lake-SHeikki Krogerus
This patch adds the necessary PCI ID for Intel Alder Lake-S devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-15Merge tag 'usb-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ...
2020-10-14Merge tag 'driver-core-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.10-rc1 They include a lot of different things, all related to the driver core and/or some driver logic: - sysfs common write functions to make it easier to audit sysfs attributes - device connection cleanups and fixes - devm helpers for a few functions - NOIO allocations for when devices are being removed - minor cleanups and fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits) regmap: debugfs: use semicolons rather than commas to separate statements platform/x86: intel_pmc_core: do not create a static struct device drivers core: node: Use a more typical macro definition style for ACCESS_ATTR drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit drivers core: Miscellaneous changes for sysfs_emit drivers core: Reindent a couple uses around sysfs_emit drivers core: Remove strcat uses around sysfs_emit and neaten drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output dyndbg: use keyword, arg varnames for query term pairs driver core: force NOIO allocations during unplug platform_device: switch to simpler IDA interface driver core: platform: Document return type of more functions Revert "driver core: Annotate dev_err_probe() with __must_check" Revert "test_firmware: Test platform fw loading on non-EFI systems" iio: adc: xilinx-xadc: use devm_krealloc() hwmon: pmbus: use more devres helpers devres: provide devm_krealloc() syscore: Use pm_pr_dbg() for syscore_{suspend,resume}() ...
2020-10-10usb: musb: gadget: Use fallthrough pseudo-keywordGustavo A. R. Silva
In order to enable -Wimplicit-fallthrough for Clang[1], replace the existing /* FALLTHROUGH */ comment with the new pseudo-keyword macro fallthrough[2]. [1] https://git.kernel.org/linus/e2079e93f562c7f7a030eb7642017ee5eabaaa10 [2] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20201008222849.GA18634@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-09usb: typec: Add QCOM PMIC typec detection driverWesley Cheng
The QCOM SPMI typec driver handles the role and orientation detection, and notifies client drivers using the USB role switch framework. It registers as a typec port, so orientation can be communicated using the typec switch APIs. The driver also attains a handle to the VBUS output regulator, so it can enable/disable the VBUS source when acting as a host/device. Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201008235934.8931-2-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08Merge tag 'usb-serial-5.10-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.10-rc1 Here are the USB-serial updates for 5.10-rc1, including: - new device ids - various clean ups All have been in linux-next with no reported issues. * tag 'usb-serial-5.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Cellient MPL200 card USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: serial: qcserial: fix altsetting probing USB: serial: ftdi_sio: clean up jtag quirks USB: serial: pl2303: add device-id for HP GC device USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adapters
2020-10-08USB: serial: option: add Cellient MPL200 cardWilken Gottwalt
Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/3db5418fe9e516f4b290736c5a199c9796025e3c.1601715478.git.wilken.gottwalt@mailbox.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-08usb: typec: tcpci_maxim: Add support for Sink FRSBadhri Jagan Sridharan
Upon receiving ALERT_EXTENDED.TCPC_SINK_FAST_ROLE_SWAP signal tcpm to start Sink fast role swap signal. Inform when TCPM is sourcing vbus. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-9-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Implement callbacks for FRSBadhri Jagan Sridharan
Implement tcpc.enable_frs to enable TCPC to receive Fast role swap signal. Additionally set the sink disconnect threshold to 4v to prevent disconnect during Fast Role swap. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-8-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)Badhri Jagan Sridharan
PD 3.0 spec defines a new mechanism for power role swap called Fast role swap. This change enables TCPM to support FRS when acting as sink. Once the explicit contract is negotiated, sink port is expected to query the source port for sink caps to determine whether the source is FRS capable. Bits 23 & 24 of fixed pdo of the sink caps from the source, when set, indicates the current needed by the source when fast role swap is in progress(Implicit contract phasae). 0 indicates that the source does not support Fast Role Swap. Upon receiving the FRS signal from the source, TCPC(TCPM_FRS_EVENT) informs TCPM to start the Fast role swap sequence. 1. TCPM sends FRS PD message: FR_SWAP_SEND 2. If response is not received within the expiry of SenderResponseTimer, Error recovery is triggered.: FR_SWAP_SEND_TIMEOUT 3. Upon receipt of the accept message, TCPM waits for PSSourceOffTimer for PS_READY message from the partner: FR_SWAP_SNK_SRC_NEW_SINK_READY. TCPC is expected to autonomously turn on vbus once the FRS signal is received and vbus voltage falls below vsafe5v within tSrcFrSwap. This is different from traditional power role swap where the vbus sourcing is turned on by TCPM. 4. By this time, TCPC most likely would have started to source vbus, TCPM waits for tSrcFrSwap to see if the lower level TCPC driver signals TCPM_SOURCING_VBUS event: FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED. 5. When TCPC signals sourcing vbus, TCPM sends PS_READY msg and changes the CC pin from Rd to Rp. This is the end of fast role swap sequence and TCPM initiates the sequnce to negotiate explicit contract by transitioning into SRC_STARTUP after SwapSrcStart. The code is written based on the sequence described in "Figure 8-107: Dual-role Port in Sink to Source Fast Role Swap State Diagram" of USB Power Delivery Specification Revision 3.0, Version 1.2. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-7-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci_maxim: Chip level TCPC driverBadhri Jagan Sridharan
Chip level TCPC driver for Maxim's TCPCI implementation. This TCPC implementation does not support the following commands: COMMAND.SinkVbus, COMMAND.SourceVbusDefaultVoltage, COMMAND.SourceVbusHighVoltage. Instead the sinking and sourcing from vbus is supported by writes to custom registers. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-5-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Add set_vbus tcpci callbackBadhri Jagan Sridharan
set_vbus callback allows TCPC which are TCPCI based, however, does not support turning on sink and source mode through Command.SinkVbus and Command.SourceVbusDefaultVoltage. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-3-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-08usb: typec: tcpci: Add a getter method to retrieve tcpm_port referenceBadhri Jagan Sridharan
Allow chip level drivers to retrieve reference to tcpm_port. Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20201008061556.1402293-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabledShuah Khan
kcov testing uncovered call to usb_hcd_giveback_urb() without disabling interrupts. Link: https://lore.kernel.org/linux-usb/CAAeHK+wb4k-LGTjK9F5YbJNviF_+yU+wE_=Vpo9Rn7KFN8vG6Q@mail.gmail.com/ usb_hcd_giveback_urb() is called from vhci's urb_enqueue, when it determines it doesn't need to xmit the urb and can give it back. This path runs in task context. Disable irqs around usb_hcd_giveback_urb() call. Reported-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20201006223914.39257-1-skhan@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05usb: cdc-acm: add quirk to blacklist ETAS ES58X devicesVincent Mailhol
The ES58X devices has a CDC ACM interface (used for debug purpose). During probing, the device is thus recognized as USB Modem (CDC ACM), preventing the etas-es58x module to load: usbcore: registered new interface driver etas_es58x usb 1-1.1: new full-speed USB device number 14 using xhci_hcd usb 1-1.1: New USB device found, idVendor=108c, idProduct=0159, bcdDevice= 1.00 usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.1: Product: ES581.4 usb 1-1.1: Manufacturer: ETAS GmbH usb 1-1.1: SerialNumber: 2204355 cdc_acm 1-1.1:1.0: No union descriptor, testing for castrated device cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device Thus, these have been added to the ignore list in drivers/usb/class/cdc-acm.c N.B. Future firmware release of the ES58X will remove the CDC-ACM interface. `lsusb -v` of the three devices variant (ES581.4, ES582.1 and ES584.1): Bus 001 Device 011: ID 108c:0159 Robert Bosch GmbH ES581.4 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0159 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES581.4 iSerial 3 2204355 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0035 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Bus Powered Configuration bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 iInterface 4 ACM Control Interface CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x01 call management bDataInterface 0 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 10 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Bus 001 Device 012: ID 108c:0168 Robert Bosch GmbH ES582 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0168 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES582 iSerial 3 0108933 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Bus 001 Device 013: ID 108c:0169 Robert Bosch GmbH ES584.1 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x108c Robert Bosch GmbH idProduct 0x0169 bcdDevice 1.00 iManufacturer 1 ETAS GmbH iProduct 2 ES584.1 iSerial 3 0100320 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0043 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 16 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201002154219.4887-8-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-05USB: serial: ftdi_sio: use cur_altsetting for consistencyMychaela N. Falconia
ftdi_determine_type() function had this construct in it to get the number of the interface it is operating on: inter = serial->interface->altsetting->desc.bInterfaceNumber; Elsewhere in this driver cur_altsetting is used instead for this purpose. Change ftdi_determine_type() to use cur_altsetting for consistency. Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org> [ johan: fix old style issues; drop braces and random white space ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05USB: serial: option: Add Telit FT980-KS compositionLeonid Bloch
This commit adds the following Telit FT980-KS composition: 0x1054: rndis, diag, adb, nmea, modem, modem, aux AT commands can be sent to /dev/ttyUSB2. Signed-off-by: Leonid Bloch <lb.workbox@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ce86bc05-f4e2-b199-0cdc-792715e3f275@asocscloud.com Link: https://lore.kernel.org/r/20201004155813.2342-1-lb.workbox@gmail.com Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-03Merge tag 'usb-for-v5.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.10 merge window Most of changes are on dwc3 (38.8%) with cdns3 falling close behind (24.1%). The biggest changes here are a series of non-critical fixes to corner cases on dwc3, produced by Thinh N, and a series of major improvements to cdns3 produced by Peter C. We also have the traditional set of new device support (Intel Keem Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch fixes on dwc3 by yours truly and a set of minor changes all over the stack. * tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits) usb: dwc2: Fix INTR OUT transfers in DDMA mode. usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs usb: dwc2: override PHY input signals with usb role switch support dt-bindings: usb: dwc2: add optional usb-role-switch property usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform dt-bindings: usb: Add Intel Keem Bay USB controller bindings usb: dwc3: gadget: Support up to max stream id usb: dwc3: gadget: Return early if no TRB update usb: dwc3: gadget: Keep TRBs in request order usb: dwc3: gadget: Revise setting IOC when no TRB left usb: dwc3: gadget: Look ahead when setting IOC usb: dwc3: gadget: Allow restarting a transfer usb: bdc: remove duplicated error message usb: dwc3: Stop active transfers before halting the controller usb: cdns3: gadget: enlarge the TRB ring length usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above usb: cdns3: gadget: need to handle sg case for workaround 2 case usb: cdns3: gadget: handle sg list use case at completion correctly usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer ...
2020-10-02USB: core: remove polling for /sys/kernel/debug/usb/devicesSergey Korolev
The latest reference to usbfs_conn_disc_event() removed in commit fb28d58b72aa ("USB: remove CONFIG_USB_DEVICEFS") in 2012 and now a user poll() waits infinitely for content changes. Signed-off-by: Sergey Korolev <s.korolev@ndmsystems.com> Link: https://lore.kernel.org/r/20200809161233.13135-1-s.korolev@ndmsystems.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: add support for STUSB160x Type-C controller familyAmelie Delaunay
STMicroelectronics USB Type-C port controllers use I2C interface to configure, control and read the operation status of the device. All ST USB Type-C port controllers are based on the same I2C register map. That's why this driver can be used with all ST USB Type-C ICs. Some ST USB Type-C port controllers are Dual Role Port (DRP), only Sink or Source, some supports USB Power Delivery. This can be configured through connector device tree bindings. This driver is a basic Type-C port controller driver, with no power delivery support. It allows to configure ST USB Type-C port controller. Interrupt is supported and enables CC connection events, to detect attach and detach and update Type-C subsystem accordingly as well as usb role switch. ST USB Type-C port controller can be supplied in three different ways depending on the target application: - through VDD pin only (so VDD is the main supply) - through VSYS pin only (so VSYS is the main supply) - through VDD and VSYS pins. When both VDD and VSYS power supplies are present, the low power supply VSYS is selected as main supply when VSYS voltage is above 3.1V, else VDD is selected as main supply. In case of Source or Dual port type, if VDD supply is present, it has to be enabled in case of Source power role to provide Vbus. When interrupt support is available, VDD supply is dynamically managed upon attach/detach interrupt. When there is no interrupt support, VDD supply is enabled by default. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200924090049.9041-5-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: add typec_find_pwr_opmodeAmelie Delaunay
This patch adds a function that converts power operation mode string into power operation mode value. It is useful to configure power operation mode through device tree property, as power capabilities may be linked to hardware design. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20200924090049.9041-3-amelie.delaunay@st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: typec: hd3ss3220: Use OF graph API to get the connector fwnodeBiju Das
Some platforms have only super speed data bus connected to this device and high speed data bus directly connected to the SoC. In such platforms modelling connector as a child of this device is making it non compliant with usb connector bindings. By modelling connector node as standalone device node along with this device and the SoC data bus will make it compliant with usb connector bindings. Update the driver to handle this model by using OF graph API to get the connector fwnode and usb role switch class API to get role switch handle. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20200920134905.4370-5-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02usb: dwc2: Fix INTR OUT transfers in DDMA mode.Minas Harutyunyan
In DDMA mode if INTR OUT transfers mps not multiple of 4 then single packet corresponds to single descriptor. Descriptor limit set to mps and desc chain limit set to mps * MAX_DMA_DESC_NUM_GENERIC. On that descriptors complete, to calculate transfer size should be considered correction value for each descriptor. In start request function, if "continue" is true then dma buffer address should be incremmented by offset for all type of transfers, not only for Control DATA_OUT transfers. Fixes: cf77b5fb9b394 ("usb: dwc2: gadget: Transfer length limit checking for DDMA") Fixes: e02f9aa6119e0 ("usb: dwc2: gadget: EP 0 specific DDMA programming") Fixes: aa3e8bc81311e ("usb: dwc2: gadget: DDMA transfer start and complete") Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCsAmelie Delaunay
If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc2: override PHY input signals with usb role switch supportAmelie Delaunay
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-10-02usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platformWan Ahmad Zainie
Add compatible string to use this generic glue layer to support Intel Keem Bay platform's dwc3 controller. Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-19 04:09:05 +0000