summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-05-11ata_piix: ICH7 does not support correct MWDMA timingsAlan Cox
See Errata documentation. The recommended workaround is to use PIO4 instead which will we automatically do by flagging this mode not available. Signed-off-by: Alan Cox <alan.cox@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11Avoid world-writable sysfs files in libata driver.Vitaly Mayatskikh
Signed-off-by: Vitaly Mayatskikh <v.mayatskih@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11libata: fix suspend/resume for ATA SEMB devicesBorislav Petkov
79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices reporting 3c/c3 signature which belongs to SEMB devices now. However, suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails with the following: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2: limiting SATA link speed to 1.5 Gbps ata4.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2.00: disabled sd 1:0:0:0: rejecting I/O to offline device sd 1:0:0:0: [sda] START_STOP FAILED sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 PM: Device 1:0:0:0 failed to thaw: error 65536 sd 3:0:0:0: [sdb] Starting disk due to a class mismatch in ata_dev_revalidate(). Fix it by adding the ATA_DEV_SEMB device class to the check. CC: Tejun Heo <htejun@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11libata: clear ering on resumeTejun Heo
Error timestamps are in jiffies which doesn't run while suspended and PHY events during resume isn't too uncommon. When the two are combined, it can lead to unnecessary speed downs if the machine is suspended and resumed repeatedly. Clear error history on resume. This was reported and verified in bnc#486803 by Vladimir Botka. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Vladimir Botka <vbotka@novell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11pata_pdc202xx_old: fix UDMA33 handlingBartlomiej Zolnierkiewicz
The original driver doesn't use 66 MHz clock for UDMA33. [ The alternative solution would be to adjust UDMA33 timings for 66 MHz clock but I think that it is safer to stick with old & tested behavior for now. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11sata_mv: use new sata phy register settings for new devicesMartin Michlmayr
Marvell's new SoC (65 nano) needs different settings for its SATA PHY registers. Tested-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11libata: fix attach error handlingTejun Heo
New device attach path in ata_eh_revalidate_and_attach() is divided into two separate loops because ATA requires IDENTIFY to be issued to slave first while the user expects to see device probe messages from the master device. new_mask is used to track which devices are the new ones between the first loop and the second. This usually works well but if an error occurs during configuration stage, ata_dev_revalidate_and_attach() returns with error code and forgets new_mask. On the retry run, dev->class is set and new_mask for the device is clear, so the device just gets revalidated and thus ends up skipping post-configuration procedure including scheduling of SCSI_HOTPLUG for the device. When this occurs, ATA part of probing works fine but SCSI probing usually doesn't happen and makes the device unreachable. The behavior has been around for a very long time but it has been uncovered with the recent addition of 1_5_GBPS horkage which uses -EAGAIN return value from ata_dev_configure() to restart the probing sequence after forcing cable speed. This can be fixed by making sure dev->class is permanently set only after all configurations are successfully complete. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tim Connors <tconnors+linuxkml@astro.swin.edu.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-11HID: add NOGET quirk for devices from CH ProductsAlan Stern
This patch (as1240) adds the NOGET quirk for three devices from CH Products: the Pro pedals, the Combatstick joystick, and the Flight-Sim yoke. Without these quirks, the devices haven't worked for many kernel releases. Sometimes replugging them after boot-up would get them to work and sometimes they wouldn't work at all. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sean Hildebrand <silverwraithii@gmail.com> Reported-by: Sid Boyce <sboyce@blueyonder.co.uk> Tested-by: Sean Hildebrand <silverwraithii@gmail.com> Tested-by: Sid Boyce <sboyce@blueyonder.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-11HID: fix dropped device-specific quirksZoltan Karcagi
Device-specific quirks are set up correctly in their respective vendor-specific driver, then get overwritten in usbhid_parse(). This is only issue for device-specific NOGET quirks being set by driver for a few devices out there. Signed-off-by: Zoltan Karcagi <zkr@freemail.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-11intel-iommu: PAE memory corruption fixDavid Woodhouse
PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE. So it's not sufficient to ensure that you use phys_addr_t or uint64_t everywhere you handle physical addresses -- you also have to avoid using the construct 'addr & PAGE_MASK', because that will strip the high 32 bits of the address. This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances that don't matter -- where it's being used on the virtual bus addresses we're dishing out, which are 32-bit anyway. Since PHYSICAL_PAGE_MASK is not present on other architectures, we have to define it (to PAGE_MASK) if it's not already defined. Maybe it would be better just to fix PAGE_MASK for i386/PAE? Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: comedi: David doesn't want to get comedi patches Staging: rtl8187se: Fix compilation warnings and procfs directory leak Staging: rt2870: new device id Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect()
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: usb-serial: ftdi_sio: fix reference counting of ftdi_private USB: unusual_devs: extend nokia 6288 bcd range USB: Gadget: fix UTF conversion in the usbstring library USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work. USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlug USB: cxacru: Fix negative dB output
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Revert driver core: move platform_data into platform_device Revert driver core: fix passing platform_data Remove old PRINTK_DEBUG config item Doc/sysfs-rules: Swap the order of the words so the sentence makes more sense Driver core: platform: fix kernel-doc warnings
2009-05-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (22 commits) Fix the race between capifs remount and node creation Fix races around the access to ->s_options switch ufs directories to ufs_sync_file() Switch open_exec() and sys_uselib() to do_open_filp() Make open_exec() and sys_uselib() use may_open(), instead of duplicating its parts Reduce path_lookup() abuses Make checkpatch.pl shut up on fs/inode.c NULL noise in fs/super.c:kill_bdev_super() romfs: cleanup romfs_fs.h ROMFS: romfs_dev_read() error ignored fs: dcache fix LRU ordering ocfs2: Use nd_set_link(). Fix deadlock in ipathfs ->get_sb() Fix a leak in failure exit in 9p ->get_sb() Convert obvious places to deactivate_locked_super() New helper: deactivate_locked_super() reiserfs: remove privroot hiding in lookup reiserfs: dont associate security.* with xattr files reiserfs: fixup xattr_root caching Always lookup priv_root on reiserfs mount and keep it ...
2009-05-10Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value at a var V4L/DVB (11679): cafe_ccic: fix sensor detection V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusion V4L/DVB (11674): ivtv: fix incorrect bit tests V4L/DVB (11669): uvc: fix compile warning V4L/DVB (11668): ivtv: fix compiler warning. V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500 V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing fields/padding V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead of try_fmt V4L/DVB (11660): zoran: fix bug when enumerating format -1 V4L/DVB (11575): uvcvideo: fix uvc resume failed
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) bonding: fix panic if initialization fails IXP4xx: complete Ethernet netdev setup before calling register_netdev(). IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ipvs: Fix IPv4 FWMARK virtual services ipv4: Make INET_LRO a bool instead of tristate. net: remove stale reference to fastroute from Kconfig help text net: update skb_recycle_check() for hardware timestamping changes bnx2: Fix panic in bnx2_poll_work(). net-sched: fix bfifo default limit igb: resolve panic on shutdown when SR-IOV is enabled wimax: oops: wimax_dev_add() is the only one that can initialize the state wimax: fix oops if netlink fails to add attribute Bluetooth: Move dev_set_name() to a context that can sleep netfilter: ctnetlink: fix wrong message type in user updates netfilter: xt_cluster: fix use of cluster match with 32 nodes netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE netfilter: add missing linux/types.h include to xt_LED.h mac80211: pid, fix memory corruption mac80211: minstrel, fix memory corruption cfg80211: fix comment on regulatory hint processing ...
2009-05-09V4L/DVB (11680): cafe_ccic: use = instead of == for setting a value at a varMauro Carvalho Chehab
/home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init': /home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11679): cafe_ccic: fix sensor detectionHans Verkuil
Due to an uninitialized chip.ident field the chip identification failed. Thanks-to: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11675): ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusionHans Verkuil
V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have been used. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11674): ivtv: fix incorrect bit testsHans Verkuil
Found the coccinelle tool. Thanks-to: Julia Lawall <julia@diku.dk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11669): uvc: fix compile warningHans Verkuil
The 2.6.30 kernel generates this warning: uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function I guess some new warning flag must have been turned on since this warning didn't appear with older kernels (gcc version 4.3.1). It's also a bogus warning, but since this code didn't comply to the coding standard anyway I've modified it to 1) remove the warning and 2) conform to the coding standard. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11668): ivtv: fix compiler warning.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500Steven Toth
The boards control struct wasn't updated when (presumably) all of the other drivers migrated from using scode_table to specifying the demod. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11662): v4l2-ioctl: Clear buffer type specific trailing fields/paddingTrent Piepho
Some ioctls have structs that are a different size depending on what type of buffer is being used. If the buffer type leaves a field unused or has padding space at the end, this space should be zeroed out. The problems with S_FMT and REQBUFS were original identified and patched by Marton Nemeth <nm127@freemail.hu>. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11661): v4l2-ioctl: Check buffer types using g_fmt instead of try_fmtTrent Piepho
For a number of different ioctls, the v4l2-ioctl code checks that the passed buffer type is supported by the driver. It did this by checking that the driver defined a method for the try_fmt handler for that buffer type. However, try_fmt is optional and a driver might not provide it even though it does support that type. So use g_fmt instead, since that isn't optional. This should fix a problem with VBI capture with saa7146. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11660): zoran: fix bug when enumerating format -1Trent Piepho
If someone requests a format at fmt->index == (unsigned)-1 and the first format in the array doesn't have the requested type then num will still be -1 when it's compared to fmt->index and there will appear to be a match. Restructure the loop so this can't happen. It's simpler this way too. The unnecessary check for (unsigned)fmt->index < 0 found by Roel Kluin <roel.kluin@gmail.com> is removed this way too. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09V4L/DVB (11575): uvcvideo: fix uvc resume failedMing Lei
Now urb buffers is not freed before suspend, so uvc_alloc_urb_buffers should return packet counts allocated originally during uvc resume, instead of zero. This version uses round down to return packet counts on Linus' suggestions, or else may lead to buffer destructed if packet size is changed before calling uvc_alloc_urb_buffers() in this kind of case. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09Merge branch 'net-fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
2009-05-09bonding: fix panic if initialization failsFlorian Westphal
If module initialisation failed (e.g. because the bonding sysfs entry cannot be created), kernel panics: IP: [<ffffffff8024910a>] destroy_workqueue+0x2d/0x146 Call Trace: [<ffffffff808268c4>] bond_destructor+0x28/0x78 [<ffffffff80b64471>] netdev_run_todo+0x231/0x25a [<ffffffff80b6dbcd>] rtnl_unlock+0x9/0xb [<ffffffff81567907>] bonding_init+0x83e/0x84a Remove the calls to bond_work_cancel_all() and destroy_workqueue(); both are also called/scheduled via bond_free_all(). bond_destroy_sysfs is unecessary because the sysfs entry has not been created in the error case. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09Fix the race between capifs remount and node creationAl Viro
we don't want to deal with half-updated config Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09Fix races around the access to ->s_optionsAl Viro
Put generic_show_options read access to s_options under rcu_read_lock, split save_mount_options() into "we are setting it the first time" (uses in foo_fill_super()) and "we are relacing and freeing the old one", synchronize_rcu() before kfree() in the latter. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09Reduce path_lookup() abusesAl Viro
... use kern_path() where possible [folded a fix from rdd] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09Fix deadlock in ipathfs ->get_sb()Al Viro
forgot to unlock superblock before calling deactivate_super()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09Convert obvious places to deactivate_locked_super()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-09IXP4xx: complete Ethernet netdev setup before calling register_netdev().Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-09IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.Krzysztof Hałasa
ENOSYS makes modutils complain about missing kernel module support. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-08Staging: comedi: David doesn't want to get comedi patchesGreg Kroah-Hartman
He's long moved on from the project. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Staging: rtl8187se: Fix compilation warnings and procfs directory leakLarry Finger
Fix some warnings during compilation and correct a programming error that was leaking a directory in /proc. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Staging: rt2870: new device idDave Hayes
Hey, I have an Edimax wireless USB adapter that uses the rt2870 chipset. lsusb shows it as follows: Bus 001 Device 002: ID 7392:7717 When I added that ID to rt2870.h, the device came up and worked as expected. From: Dave Hayes <dwhayes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Staging: w35und: unregister device from the ieee80211 stack upon ->disconnect()Pekka Enberg
Impact: fix module removal This patch fixes an oops when the w35und module is removed from the kernel and added back. Reported-by: luoyi <luoyi.ly@gmail.com> Tested-by: Sandro Bonazzola <sandro.bonazzola@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08usb-serial: ftdi_sio: fix reference counting of ftdi_privateAlan Stern
This patch (as1238) adds proper reference counting for ftdi_sio's private data structure. Without it, the driver will free the structure while it is still in use if the user unplugs the serial device before closing the device file. The patch also replaces a slightly dangerous cancel_delayed_work/flush_scheduled_work pair with cancel_delayed_work_sync, which is always safer. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Mack <daniel@caiaq.de> Tested-by: Daniel Mack <daniel@caiaq.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: unusual_devs: extend nokia 6288 bcd rangePhil Dibowitz
This patch was originaly submitted by Phillip Potter <phillipinda@hotmail.com> but was re-diffed to conform with SubmittingPatches and to rebase on a newer tree by me. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: Gadget: fix UTF conversion in the usbstring libraryAlan Stern
This patch (as1234) fixes a bug in the UTF8 -> UTF-16 conversion routine in the gadget/usbstring library. In a UTF-8 multi-byte sequence, all bytes after the first should have their high-order two bits set to 10, not 11. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: Fix makefile so that CONFIG_WDM and CONFIG_TMC work.Andy Lutomirski
If CONFIG_USB_ACM and CONFIG_USB_PRINTER are not set, then cdc-wdm and usbtmc won't get built. Signed-off-by: Andy Lutomirski <amluto@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: ftdi_sio: add vendor/product id for the Marvell SheevaPlugNicolas Pitre
For reference: http://www.marvell.com/products/embedded_processors/developer/kirkwood/sheevaplug.jsp Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08USB: cxacru: Fix negative dB outputSimon Arlott
Values of dB between -0.99 and -0.01 will be output with the wrong sign. This converts the negative value to positive and outputs it with a "-" prefix. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Revert driver core: move platform_data into platform_deviceGreg Kroah-Hartman
This reverts commit 006f4571a15fae3a0575f2a0f9e9b63b3d1012f8: This patch moves platform_data from struct device into struct platform_device, based on the two ideas: 1. Now all platform_driver is registered by platform_driver_register, which makes probe()/release()/... of platform_driver passed parameter of platform_device *, so platform driver can get platform_data from platform_device; 2. Other kind of devices do not need to use platform_data, we can decrease size of device if moving it to platform_device. Taking into consideration of thousands of files to be fixed and they can't be finished in one night(maybe it will take a long time), so we keep platform_data in device to allow two kind of cases coexist until all platform devices pass its platfrom data from platform_device->platform_data. All patches to do this kind of conversion are welcome. As we don't really want to do it, it was a bad idea. Cc: David Brownell <david-b@pacbell.net> Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Revert driver core: fix passing platform_dataMing Lei
This reverts commit ce21c7bcd796fc4f45d48781b7e85f493cc55ee5: We will remove platform_data field from struct device until all platform devices pass its specific data from platfom_device and all platform drivers use platform specific data passed by platform_device->platform_data. This kind of conversion will need a long time, for thousands of files is affected. To make the conversion easily, we allow platform specific data passed by struct device or struct platform_device and platform driver may use it from struct device or struct platform_device. As we really don't want to do this at all. Cc: David Brownell <david-b@pacbell.net> Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Driver core: platform: fix kernel-doc warningsRandy Dunlap
Fix function parameter notation in platform.c; fixes kernel-doc warnings. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-08Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd: fix timeout in M25P80 driver mtd: Bug in m25p80.c during whole-chip erase mtd: expose subpage size via sysfs mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR