summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-06-13USB: allow match on bInterfaceNumberBjørn Mork
Some composite USB devices provide multiple interfaces with different functions, all using "vendor-specific" for class/subclass/protocol. Another OS use interface numbers to match the driver and interface. It seems these devices are designed with that in mind - using static interface numbers for the different functions. This adds support for matching against the bInterfaceNumber, allowing such devices to be supported without having to resort to testing against interface number whitelists and/or blacklists in the probe. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: rename the usb misc class from "usb" to "usbmisc"Greg Kroah-Hartman
This class was not named properly years ago, and it turns out that tools like udev can't properly see the devices in this class after booting due to the fact that there is a bus with the same name in the system. Changing this to "usbmisc" fixes this problem, and it solves the problem for the future when we want to unify classes and busses. Reported-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: storage: fixed space issues in coding style.Jeffrin Jose
Fixed space issues in coding style found by checkpatch.pl tool in drivers/usb/storage/protocol.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: option: handle send_setup blacklisting at probeJohan Hovold
Determine whether to use send_setup at probe time rather than at every call to send_setup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: option: clean up probe coding styleJohan Hovold
Clean up option probe by introducing intermediate variables and fixing up comments. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman
This is to pick up the changes to the option driver, which are needed for follow-on patches from Johan. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: option: use usb_{get,set}_serial_dataJohan Hovold
Use usb_{get,set}_serial_data to access usb-serial data. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: serial-generic: use a single set of device IDsAlan Stern
The usb-serial-generic driver uses different device IDs for its USB matching and its serial matching. This can lead to problems: The driver can end up getting bound to a USB interface without being allowed to bind to the corresponding serial port. This patch (as1557) fixes the problem by using the same device ID table (the one that can be altered by the "vendor=" and "product=" module parameters) for both purposes. The unused table is removed. Now the driver will bind only to the intended devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: serial: Enforce USB driver and USB serial driver matchBjørn Mork
We need to make sure that the USB serial driver we find matches the USB driver whose probe we are currently executing. Otherwise we will end up with USB serial devices bound to the correct serial driver but wrong USB driver. An example of such cross-probing, where the usbserial_generic USB driver has found the sierra serial driver: May 29 18:26:15 nemi kernel: [ 4442.559246] usbserial_generic 4-4:1.0: Sierra USB modem converter detected May 29 18:26:20 nemi kernel: [ 4447.556747] usbserial_generic 4-4:1.2: Sierra USB modem converter detected May 29 18:26:25 nemi kernel: [ 4452.557288] usbserial_generic 4-4:1.3: Sierra USB modem converter detected sysfs view of the same problem: bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/sierra/ total 0 --w------- 1 root root 4096 May 29 18:23 bind lrwxrwxrwx 1 root root 0 May 29 18:23 module -> ../../../../module/sierra -rw-r--r-- 1 root root 4096 May 29 18:23 new_id lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/ttyUSB0 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB1 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2/ttyUSB1 lrwxrwxrwx 1 root root 0 May 29 18:32 ttyUSB2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3/ttyUSB2 --w------- 1 root root 4096 May 29 18:23 uevent --w------- 1 root root 4096 May 29 18:23 unbind bjorn@nemi:~$ ls -l /sys/bus/usb/drivers/usbserial_generic/ total 0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.0 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.2 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.2 lrwxrwxrwx 1 root root 0 May 29 18:33 4-4:1.3 -> ../../../../devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.3 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind bjorn@nemi:~$ ls -l /sys/bus/usb-serial/drivers/generic/ total 0 --w------- 1 root root 4096 May 29 18:33 bind lrwxrwxrwx 1 root root 0 May 29 18:33 module -> ../../../../module/usbserial -rw-r--r-- 1 root root 4096 May 29 18:33 new_id --w------- 1 root root 4096 May 29 18:22 uevent --w------- 1 root root 4096 May 29 18:33 unbind So we end up with a mismatch between the USB driver and the USB serial driver. The reason for the above is simple: The USB driver probe will succeed if *any* registered serial driver matches, and will use that serial driver for all serial driver functions. This makes ref counting go wrong. We count the USB driver as used, but not the USB serial driver. This may result in Oops'es as demonstrated by Johan Hovold <jhovold@gmail.com>: [11811.646396] drivers/usb/serial/usb-serial.c: get_free_serial 1 [11811.646443] drivers/usb/serial/usb-serial.c: get_free_serial - minor base = 0 [11811.646460] drivers/usb/serial/usb-serial.c: usb_serial_probe - registering ttyUSB0 [11811.646766] usb 6-1: pl2303 converter now attached to ttyUSB0 [11812.264197] USB Serial deregistering driver FTDI USB Serial Device [11812.264865] usbcore: deregistering interface driver ftdi_sio [11812.282180] USB Serial deregistering driver pl2303 [11812.283141] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [11812.283272] usbcore: deregistering interface driver pl2303 [11812.301056] USB Serial deregistering driver generic [11812.301186] usbcore: deregistering interface driver usbserial_generic [11812.301259] drivers/usb/serial/usb-serial.c: usb_serial_disconnect [11812.301823] BUG: unable to handle kernel paging request at f8e7438c [11812.301845] IP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.301871] *pde = 357ef067 *pte = 00000000 [11812.301957] Oops: 0000 [#1] PREEMPT SMP [11812.301983] Modules linked in: usbserial(-) [last unloaded: pl2303] [11812.302008] [11812.302019] Pid: 1323, comm: modprobe Tainted: G W 3.4.0-rc7+ #101 Dell Inc. Vostro 1520/0T816J [11812.302115] EIP: 0060:[<f8e38445>] EFLAGS: 00010246 CPU: 1 [11812.302130] EIP is at usb_serial_disconnect+0xb5/0x100 [usbserial] [11812.302141] EAX: f508a180 EBX: f508a180 ECX: 00000000 EDX: f8e74300 [11812.302151] ESI: f5050800 EDI: 00000001 EBP: f5141e78 ESP: f5141e58 [11812.302160] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [11812.302170] CR0: 8005003b CR2: f8e7438c CR3: 34848000 CR4: 000007d0 [11812.302180] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [11812.302189] DR6: ffff0ff0 DR7: 00000400 [11812.302199] Process modprobe (pid: 1323, ti=f5140000 task=f61e2bc0 task.ti=f5140000) [11812.302209] Stack: [11812.302216] f8e3be0f f8e3b29c f8e3ae00 00000000 f513641c f5136400 f513641c f507a540 [11812.302325] f5141e98 c133d2c1 00000000 00000000 f509c400 f513641c f507a590 f5136450 [11812.302372] f5141ea8 c12f0344 f513641c f507a590 f5141ebc c12f0c67 00000000 f507a590 [11812.302419] Call Trace: [11812.302439] [<c133d2c1>] usb_unbind_interface+0x51/0x190 [11812.302456] [<c12f0344>] __device_release_driver+0x64/0xb0 [11812.302469] [<c12f0c67>] driver_detach+0x97/0xa0 [11812.302483] [<c12f001c>] bus_remove_driver+0x6c/0xe0 [11812.302500] [<c145938d>] ? __mutex_unlock_slowpath+0xcd/0x140 [11812.302514] [<c12f0ff9>] driver_unregister+0x49/0x80 [11812.302528] [<c1457df6>] ? printk+0x1d/0x1f [11812.302540] [<c133c50d>] usb_deregister+0x5d/0xb0 [11812.302557] [<f8e37c55>] ? usb_serial_deregister+0x45/0x50 [usbserial] [11812.302575] [<f8e37c8d>] usb_serial_deregister_drivers+0x2d/0x40 [usbserial] [11812.302593] [<f8e3a6e2>] usb_serial_generic_deregister+0x12/0x20 [usbserial] [11812.302611] [<f8e3acf0>] usb_serial_exit+0x8/0x32 [usbserial] [11812.302716] [<c1080b48>] sys_delete_module+0x158/0x260 [11812.302730] [<c110594e>] ? mntput+0x1e/0x30 [11812.302746] [<c145c3c3>] ? sysenter_exit+0xf/0x18 [11812.302746] [<c107777c>] ? trace_hardirqs_on_caller+0xec/0x170 [11812.302746] [<c145c390>] sysenter_do_call+0x12/0x36 [11812.302746] Code: 24 02 00 00 e8 dd f3 20 c8 f6 86 74 02 00 00 02 74 b4 8d 86 4c 02 00 00 47 e8 78 55 4b c8 0f b6 43 0e 39 f8 7f a9 8b 53 04 89 d8 <ff> 92 8c 00 00 00 89 d8 e8 0e ff ff ff 8b 45 f0 c7 44 24 04 2f [11812.302746] EIP: [<f8e38445>] usb_serial_disconnect+0xb5/0x100 [usbserial] SS:ESP 0068:f5141e58 [11812.302746] CR2: 00000000f8e7438c Fix by only evaluating serial drivers pointing back to the USB driver we are currently probing. This still allows two or more drivers to match the same device, running their serial driver probes to sort out which one to use. Cc: stable@vger.kernel.org # 3.0, 3.2, 3.3, 3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: add NO_D3_DURING_SLEEP flag and revert 151b61284776be2Alan Stern
This patch (as1558) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. A similar patch has already been applied as commit 151b61284776be2d6f02d48c23c3625678960b97 (USB: EHCI: fix crash during suspend on ASUS computers). The patch supersedes that one and reverts it. There are two differences: The old patch added the flag at the USB level; this patch adds it at the PCI level. The old patch applied to all chipsets with the same vendor, subsystem vendor, and product IDs; this patch makes an exception for a known-good system (based on DMI information). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Dâniel Fraga <fragabr@gmail.com> Tested-by: Andrey Rahmatullin <wrar@wrar.name> Tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: stable <stable@vger.kernel.org> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phyRichard Zhao
- to decrease redundant since both ehci_hcd and ohci_hcd have the same variable - it helps access phy in usb core code - phy is more meaningful than transceiver Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: option: add more YUGA device ids说不得
Signed-off-by: gavin zhu <gavin.zhu@qq.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: mos7840: Fix compilation of usb serial driverTony Zelenoff
The __devinitconst section can't be referenced from usb_serial_device structure. Thus removed it as it done in other mos* device drivers. Error itself: WARNING: drivers/usb/serial/mos7840.o(.data+0x8): Section mismatch in reference from the variable moschip7840_4port_device to the variable .devinit.rodata:id_table The variable moschip7840_4port_device references the variable __devinitconst id_table [v2] no attach now Signed-off-by: Tony Zelenoff <antonz@parallels.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: option: fix memory leakJohan Hovold
Fix memory leak introduced by commit 383cedc3bb435de7a2 ("USB: serial: full autosuspend support for the option driver") which allocates usb-serial data but never frees it. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: option: fix port-data abuseJohan Hovold
Commit 8b4c6a3ab596961b78465 ("USB: option: Use generic USB wwan code") moved option port-data allocation to usb_wwan_startup but still cast the port data to the old struct... Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: mct_u232: Fix incorrect TIOCMSET returnAlan Cox
The low level helper returns 1 on success. The ioctl should however return 0. As this is the only user of the helper return, make the helper return 0 or an error code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43009 Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: option: Updated Huawei K4605 has better idAndrew Bird
Later firmwares for this device now have proper subclass and protocol info so we can identify it nicely without needing to use the blacklist. I'm not removing the old 0xff matching as there may be devices in the field that still need that. Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: serial: sierra: Add support for Sierra Wireless AirCard 320U modemTom Cassidy
Add support for Sierra Wireless AirCard 320U modem Signed-off-by: Tomas Cassidy <tomas.cassidy@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: serial: cp210x: add Optris MS Pro usb idMikko Tuumanen
Signed-off-by: Mikko Tuumanen <mikko.tuumanen@qemsoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: ftdi-sio: Add support for RT Systems USB-RTS01 serial adapterEvan McNabb
Add support for RT Systems USB-RTS01 USB to Serial adapter: http://www.rtsystemsinc.com/Photos/USBRTS01.html Tested by controlling Icom IC-718 amateur radio transceiver via hamlib. Signed-off-by: Evan McNabb <evan@mcnabbs.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: qcserial: Add Sierra Wireless device IDsBjørn Mork
Some additional IDs found in the BSD/GPL licensed out-of-tree GobiSerial driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: option: Add Vodafone/Huawei K5005 supportBjørn Mork
Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12USB: cdc-wdm: Add Vodafone/Huawei K5005 supportBjørn Mork
Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-08Revert "drm/i915/crt: Do not rely upon the HPD presence pin"Linus Torvalds
This reverts commit 9e612a008fa7fe493a473454def56aa321479495. It incorrectly finds VGA connectors where none are attached, apparently not noticing that nothing replied to the EDID queries, and happily using the default EDID modes that have nothing to do with actual hardware. That in turn then causes X to fall down to the lowest common denominator, which is usually the default 1024x768 mode that is in the default EDID and pretty much anything supports). I'd suggest that if not relying on the HDP pin, the code should at least check whether it gets valid EDID data back, rather than just assume there's something on the VGA connector. Cc: Dave Airlie <airlied@linux.ie> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-08Merge tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS fixes from Artem Bityutskiy: "Fix UBI and UBIFS - they refuse to work without debugfs. This was broken by the 3.5-rc1 UBI/UBIFS changes when we removed the debugging Kconfig switches. Also, correct locking in 'ubi_wl_flush()' - it was extended to support flushing a specific LEB in 3.5-rc1, and the locking was sub-optimal." * tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifs: UBI: correct ubi_wl_flush locking UBIFS: fix debugfs-less systems support UBI: fix debugfs-less systems support
2012-06-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm intel and exynos fixes from Dave Airlie: "A bunch of fixes for Intel and exynos, nothing too major, a new intel PCI ID, and a fix for CRT detection." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler char/agp: add another Ironlake host bridge drm/i915: fix up ivb plane 3 pageflips drm/exynos: fixed blending for hdmi graphic layer drm/exynos: Remove dummy encoder get_crtc operation implementation drm/exynos: Keep a reference to frame buffer GEM objects drm/exynos: Don't cast GEM object to Exynos GEM object when not needed drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature drm/exynos: fixed size type. drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M} drm/i915: hold forcewake around ring hw init drm/i915: Mark the ringbuffers as being in the GTT domain drm/i915/crt: Do not rely upon the HPD presence pin drm/i915: Reset last_retired_head when resetting ring
2012-06-08Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm/exynos: fixed blending for hdmi graphic layer drm/exynos: Remove dummy encoder get_crtc operation implementation drm/exynos: Keep a reference to frame buffer GEM objects drm/exynos: Don't cast GEM object to Exynos GEM object when not needed drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature drm/exynos: fixed size type. drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M}
2012-06-08Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler char/agp: add another Ironlake host bridge drm/i915: fix up ivb plane 3 pageflips drm/i915: hold forcewake around ring hw init drm/i915: Mark the ringbuffers as being in the GTT domain drm/i915/crt: Do not rely upon the HPD presence pin drm/i915: Reset last_retired_head when resetting ring
2012-06-07drivers/platform/x86/acerhdf.c: correct Boris' mail addressBorislav Petkov
Correct mail address reference to a mail account which I actually read. Signed-off-by: Borislav Petkov <bp@alien8.de> Cc: Peter Feuerer <peter@piie.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-07UBI: correct ubi_wl_flush lockingArtem Bityutskiy
Commit "62f38455 UBI: modify ubi_wl_flush function to clear work queue for a lnum" takes the 'work_sem' semaphore in write mode for the entire loop, which is not very good because it will block other workers for potentially long time. We do not need to have it in write mode - read mode is enough, and we do not need to hole it over the entire loop. So this patch turns changes the locking: takes 'work_sem' in read mode and pushes it down to the loop. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-07UBI: fix debugfs-less systems supportArtem Bityutskiy
Commit "aa44d1d UBI: remove Kconfig debugging option" broke UBI and it refuses to initialize if debugfs (CONFIG_DEBUG_FS) is disabled. I incorrectly assumed that debugfs files creation function will return success if debugfs is disabled, but they actually return -ENODEV. This patch fixes the issue. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Tested-by: Paul Parsons <lost.distance@yahoo.com>
2012-06-06drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handlerAdam Jackson
Cougar/Panther Point redefine the bits in SDEIIR pretty completely. This function is just debugging, but if we're debugging we probably want to be told accurate things instead of lies. I'm told Lynx Point changes this yet more, but I have no idea how... Note from Eugeni's review: "For the record and for future enabling efforts, for LPT, bits 28-31 and 1-14 are gone since CPT/PPT (e.g., those must be zero). And there is the bit 15 as a new addition, but we are not using it yet and probably won't be using in foreseeable future." Signed-off-by: Adam Jackson <ajax@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35103 Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI and Power Management changes from Len Brown. This does an evil merge to fix up what I think is a mismerge by Len to the gma500 driver, and restore it to the mainline state. In that driver, both branches had commented out the call to acpi_video_register(), and Len resolved the merge to that commented-out version. However, in mainline, further changes by Alan (commit d839ede47a56: "gma500: opregion and ACPI" to be exact) had re-enabled the ACPI video registration, so the current state of the driver seems to want it. Alan is apparently still feeling the effects of partying with the Queen, so he didn't reply to my query, but I'll do the evil merge anyway. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: fix acpi_bus.h build warnings when ACPI is not enabled drivers: acpi: Fix dependency for ACPI_HOTPLUG_CPU tools/power turbostat: fix IVB support tools/power turbostat: fix un-intended affinity of forked program ACPI video: use after input_unregister_device() gma500: don't register the ACPI video bus acpi_video: Intel video is not always i915 acpi_video: fix leaking PCI references ACPI: Ignore invalid _PSS entries, but use valid ones ACPI battery: only refresh the sysfs files when pertinent information changes
2012-06-06Merge tag 'rdma-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA fixes from Roland Dreier: "All in hardware drivers: - Fix crash in cxgb4 - Fixes to new ocrdma driver - Regression fixes for mlx4" * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix max_wqe capacity reported from query device mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow IB/mlx4: Fix EQ deallocation in legacy mode RDMA/cxgb4: Fix crash when peer address is 0.0.0.0 RDMA/ocrdma: Remove unnecessary version.h includes RDMA/ocrdma: Fix signaled event for SRQ_LIMIT_REACHED RDMA/ocrdma: Correct queue free count math
2012-06-06Merge branches 'cxgb4', 'mlx4' and 'ocrdma' into for-linusRoland Dreier
2012-06-06IB/mlx4: Fix max_wqe capacity reported from query deviceSagi Grimberg
1. Limit the max number of WQEs per QP reported when querying the device, so that ib_create_qp() will not fail for a QP size that the device claimed to support due to additional headroom WQEs being allocated. 2. Limit qp resources accepted for ib_create_qp() to the limits reported in ib_query_device(). In kernel space, make sure that the limits returned to the caller following qp creation also lie within the reported device limits. For userspace, report as before, and do adjustment in libmlx4 (so as not to break ABI). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-06mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flowJack Morgenstein
Commit 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports") modifies the port VL setting. This exposes a bug in mlx4_common_set_port(), where the VL cap value passed in (inside the command mailbox) is incorrectly zeroed-out: mlx4_SET_PORT modifies the VL_cap field (byte 3 of the mailbox). Since the SET_PORT command is paravirtualized on the master as well as on the slaves, mlx4_SET_PORT_wrapper() is invoked on the master. This calls mlx4_common_set_port() where mailbox byte 3 gets overwritten by code which should only set a single bit in that byte (for the reset qkey counter flag) -- but instead overwrites the entire byte. The result is that when running in SR-IOV mode, the VL_cap will be set to zero -- fix this. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-06Merge tag 'md-3.5-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull two md fixes from NeilBrown: "One sparse-warning fix, one bugfix for 3.4-stable" * tag 'md-3.5-fixes' of git://neil.brown.name/md: md: raid1/raid10: fix problem with merge_bvec_fn lib/raid6: fix sparse warnings in recovery functions
2012-06-06Merge tag 'iommu-fixes-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two patches are in here which fix AMD IOMMU specific issues. One patch fixes a long-standing warning on resume because the amd_iommu_resume function enabled interrupts. The other patch fixes a deadlock in an error-path of the page-fault request handling code of the IOMMU driver. * tag 'iommu-fixes-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix deadlock in ppr-handling error path iommu/amd: Cache pdev pointer to root-bridge
2012-06-06char/agp: add another Ironlake host bridgeEugeni Dodonov
This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-05drm/i915: fix up ivb plane 3 pageflipsDaniel Vetter
Or at least plug another gapping hole. Apparrently hw desingers only moved the bit field, but did not bother ot re-enumerate the planes when adding support for a 3rd pipe. Discovered by i-g-t/flip_test. This may or may not fix the reference bugzilla, because that one smells like we have still larger fish to fry. v2: Fixup the impossible case to catch programming errors, noticed by Chris Wilson. References: https://bugs.freedesktop.org/show_bug.cgi?id=50069 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-05Merge branch '3.5-merge-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull two scsi target fixes from Nicholas Bellinger: "The first is a small name-space collision fix from Stefan for the new sbp-target / ieee-1394 code, and second is the FILEIO backend conversion patch to always use O_DSYNC by default instead of O_SYNC as recommended by hch. Note the latter is CC'ed stable." * '3.5-merge-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/file: Use O_DSYNC by default for FILEIO backends sbp-target: rename a variable to avoid name clash
2012-06-05Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull embedded i2c update from Wolfram Sang: "This only contains one new driver which had multiple dependencies (pinctrl, i2c-mux-rework, new devm_* functions), so I decided to wait for rc1. Plus, it had to wait a little for the ack of a devicetree maintainer since the bindings were not trivial enough for me to pass through. So, given that, I hope there is still something like the "new driver rule", so we could have the driver in 3.5 and people can start using it. That would make merging support for some boards easier for 3.6 since the dependency on this driver is gone then." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: Add generic I2C multiplexer using pinctrl API
2012-06-05drm/radeon/kms: add new Trinity PCI idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: fix vm deadlocks on caymanChristian König
Locking mutex in different orders just screams for deadlocks, and some testing showed that it is actually quite easy to trigger them. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: fix gpu_init on siAlex Deucher
- Properly set up the RBs - Properly set up the SPI - Properly set up gb_addr_config This should fix rendering issues on certain cards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon/hdmi: don't set SEND_MAX_PACKETS bitRafał Miłecki
Many TVs and A/V receivers don't work with this bit set. Problem was confirmed using: Onkyo TX-SR605, Sony BRAVIA KDL-52X3500, Sony BRAVIA KDL-40S40xx. In theory this bit shouldn't affect audio engine when feeding it with data, however it seems it does. Driver fglrx doesn't set that bit in any of the above cases. This fixes a regression introduced by 3.5-rc1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon/audio: don't hardcode CRTC idRafał Miłecki
This is based on info released by AMD, should allow using audio in much more cases. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: make audio_init consistent across asicsAlex Deucher
Call it in the asic startup callback on all asics. Previously r600 and rv770 called it in the startup and resume callbacks while all the other asics called it in the startup callback. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/exynos: fixed blending for hdmi graphic layerSeung-Woo Kim
Blending for graphic layer 0 of hdmi mixer was not set so video layer cannot be showed if graphic layer 0 is enabled. This patch fixes blending values to support blending between graphic layer 0 and video layer. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-08 21:35:59 +0000