| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Start checking for -mindirect-branch-cs-prefix clang support too now
that LLVM 16 will support it
- Fix a NULL ptr deref when suspending with Xen PV
- Have a SEV-SNP guest check explicitly for features enabled by the
hypervisor and fail gracefully if some are unsupported by the guest
instead of failing in a non-obvious and hard-to-debug way
- Fix a MSI descriptor leakage under Xen
- Mark Xen's MSI domain as supporting MSI-X
- Prevent legacy PIC interrupts from being resent in software by
marking them level triggered, as they should be, which lead to a NULL
ptr deref
* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
acpi: Fix suspend with Xen PV
x86/sev: Add SEV-SNP guest feature negotiation support
x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- touchpads on HP 15-* laptops switched back to PS/2 emulation mode
- a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
responding after resume
* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add Clevo PCX0DX to i8042 quirk table
Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A couple of fixes for bugs introduced during the merge window. One is
a regression, the other was a bug in the CXL AER handler:
- Fix a crash regression due to module load order of cxl_pmem.ko
- Fix wrong register offset read in CXL AER handling path"
* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment
|
|
Pull block fixes from Jens Axboe:
"Minor tweaks for this release:
- NVMe pull request via Christoph:
- Flush initial scan_work for async probe (Keith Busch)
- Fix passthrough csi check (Keith Busch)
- Fix nvme-fc initialization order (Ross Lagerwall)
- Fix for tearing down non-started device in ublk (Ming)"
* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
block: ublk: move ublk_chr_class destroying after devices are removed
nvme: fix passthrough csi check
nvme-pci: flush initial scan_work for async probe
nvme-fc: fix initialization order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST
- Reorganize gcc-plugin includes for GCC 13
- Silence bcache memcpy run-time false positive warnings
* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
bcache: Silence memcpy() run-time false positive warnings
gcc-plugins: Reorganize gimple includes for GCC 13
kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A bunch of driver fixes with a tiny bit of new IDs"
* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: fix a bunch of kernel-doc warnings
i2c: axxia: use 'struct' for kernel-doc notation
dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
i2c: mxs: suppress probe-deferral error message
i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
i2c: designware: Fix unbalanced suspended flag
i2c: designware: use casting of u64 in clock multiplication to avoid overflow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the -c option in the gpio-event-mode user-space example program
- fix the irq number translation in gpio-ep93xx and make its irqchip
immutable
- add a missing spin_unlock in error path in gpio-mxc
- fix a suspend breakage on System76 and Lenovo Gen2a introduced in
GPIO ACPI
* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
tools: gpio: fix -c option of gpio-event-mon
gpio: ep93xx: remove unused variable
gpio: ep93xx: Make irqchip immutable
gpio: ep93xx: Fix port F hwirq numbers in handler
gpio: mxc: Unlock on error path in mxc_flip_edge()
gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode
|
|
Pull drm fixes from Dave Airlie:
"Fairly small this week as well, i915 has a memory leak fix and some
minor changes, and amdgpu has some MST fixes, and some other minor
ones:
drm:
- DP MST kref fix
- fb_helper: check return value
i915:
- Fix BSC default context for Meteor Lake
- Fix selftest-scheduler's modify_type
- memory leak fix
amdgpu:
- GC11.x fixes
- SMU13.0.0 fix
- Freesync video fix
- DP MST fixes
- build fix"
* tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm:
amdgpu: fix build on non-DCN platforms.
drm/amd/display: Fix timing not changning when freesync video is enabled
drm/display/dp_mst: Correct the kref of port.
drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPD
drm/amdgpu/display/mst: limit payload to be updated one by one
drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignments
drm/amdgpu: declare firmware for new MES 11.0.4
drm/amdgpu: enable imu firmware for GC 11.0.4
drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0
drm/amdgpu: remove unconditional trap enable on add gfx11 queues
drm/fb-helper: Use a per-driver FB deferred I/O handler
drm/fb-helper: Check fb_deferred_io_init() return value
drm/i915/selftest: fix intel_selftest_modify_policy argument types
drm/i915/mtl: Fix bcs default context
drm/i915: Fix a memory leak with reused mmap_offset
drm/drm_vma_manager: Add drm_vma_node_allow_once()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Add ACPI backlight handling quirks for 3 machines (Hans de Goede)"
* tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add backlight=native DMI quirk for Asus U46E
ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Add locking to the Intel int340x thermal control driver to prevent its
thermal zone callbacks from racing with firmware-induced thermal trip
point updates (Srinivas Pandruvada, Rafael Wysocki)"
* tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
thermal: intel: int340x: Protect trip temperature from concurrent updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
- Fix event counting regression in Arm CMN PMU driver due to broken
optimisation
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Partially revert "perf/arm-cmn: Optimise DTC counter accesses"
|
|
This one was left behind by a previous cleanup patch:
drivers/gpio/gpio-ep93xx.c: In function 'ep93xx_gpio_add_bank':
drivers/gpio/gpio-ep93xx.c:366:34: error: unused variable 'ic' [-Werror=unused-variable]
Fixes: 216f37366e86 ("gpio: ep93xx: Make irqchip immutable")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix and a preliminary patch to fix a memory leak in i915, and a use
after free fix for fbdev deferred io
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126104018.cbrcjxl5wefdbb2f@houat
|
|
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-25:
amdgpu:
- GC11.x fixes
- SMU13.0.0 fix
- Freesync video fix
- DP MST fixes
drm:
- DP MST kref fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125220153.320248-1-alexander.deucher@amd.com
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- flush initial scan_work for async probe (Keith Busch)
- fix passthrough csi check (Keith Busch)
- fix nvme-fc initialization order (Ross Lagerwall)"
* tag 'nvme-6.2-2023-01-26' of git://git.infradead.org/nvme:
nvme: fix passthrough csi check
nvme-pci: flush initial scan_work for async probe
nvme-fc: fix initialization order
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix false positive apple_gmux backlight detection on older iGPU only
MacBook models
- Various other small fixes and hardware-id additions
* tag 'platform-drivers-x86-v6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
ACPI: video: Fix apple gmux detection
platform/x86: apple-gmux: Add apple_gmux_detect() helper
platform/x86: apple-gmux: Move port defines to apple-gmux.h
platform/x86: hp-wmi: Fix cast to smaller integer type warning
platform/x86/amd: pmc: Add a module parameter to disable workarounds
platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN
platform/x86: asus-wmi: Fix kbd_dock_devid tablet-switch reporting
platform/x86: gigabyte-wmi: add support for B450M DS3H WIFI-CF
platform/x86: hp-wmi: Handle Omen Key event
platform/x86: dell-wmi: Add a keymap for KEY_MUTE in type 0x0010 table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- sched: sch_taprio: do not schedule in taprio_reset()
Previous releases - regressions:
- core: fix UaF in netns ops registration error path
- ipv4: prevent potential spectre v1 gadgets
- ipv6: fix reachability confirmation with proxy_ndp
- netfilter: fix for the set rbtree
- eth: fec: use page_pool_put_full_page when freeing rx buffers
- eth: iavf: fix temporary deadlock and failure to set MAC address
Previous releases - always broken:
- netlink: prevent potential spectre v1 gadgets
- netfilter: fixes for SCTP connection tracking
- mctp: struct sock lifetime fixes
- eth: ravb: fix possible hang if RIS2_QFF1 happen
- eth: tg3: resolve deadlock in tg3_reset_task() during EEH
Misc:
- Mat stepped out as MPTCP co-maintainer"
* tag 'net-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: mdio-mux-meson-g12a: force internal PHY off on mux switch
docs: networking: Fix bridge documentation URL
tsnep: Fix TX queue stop/wake for multiple queues
net/tg3: resolve deadlock in tg3_reset_task() during EEH
net: mctp: mark socks as dead on unhash, prevent re-add
net: mctp: hold key reference when looking up a general key
net: mctp: move expiry timer delete to unhash
net: mctp: add an explicit reference from a mctp_sk_key to sock
net: ravb: Fix possible hang if RIS2_QFF1 happen
net: ravb: Fix lack of register setting after system resumed for Gen3
net/x25: Fix to not accept on connected socket
ice: move devlink port creation/deletion
sctp: fail if no bound addresses can be used for a given scope
net/sched: sch_taprio: do not schedule in taprio_reset()
Revert "Merge branch 'ethtool-mac-merge'"
netrom: Fix use-after-free of a listening socket.
netfilter: conntrack: unify established states for SCTP paths
Revert "netfilter: conntrack: add sctp DATA_SENT state"
netfilter: conntrack: fix bug in for_each_sctp_chunk
netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
...
|
|
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa115 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943e5 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c439937775d ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The 'ublk_chr_class' is needed when deleting ublk char devices in
ublk_exit(), so move it after devices(idle) are removed.
Fixes the following warning reported by Harris, James R:
[ 859.178950] sysfs group 'power' not found for kobject 'ublkc0'
[ 859.178962] WARNING: CPU: 3 PID: 1109 at fs/sysfs/group.c:278 sysfs_remove_group+0x9c/0xb0
Reported-by: "Harris, James R" <james.r.harris@intel.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Link: https://lore.kernel.org/linux-block/Y9JlFmSgDl3+zy3N@T590/T/#t
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Link: https://lore.kernel.org/r/20230126115346.263344-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It turns out the optimisation implemented by commit 4f2c3872dde5 is
totally broken, since all the places that consume hw->dtcs_used for
events other than cycle count are still not expecting it to be sparsely
populated, and fail to read all the relevant DTC counters correctly if
so.
If implemented correctly, the optimisation potentially saves up to 3
register reads per event update, which is reasonably significant for
events targeting a single node, but still not worth a massive amount of
additional code complexity overall. Getting it right within the current
design looks a fair bit more involved than it was ever intended to be,
so let's just make a functional revert which restores the old behaviour
while still backporting easily.
Fixes: 4f2c3872dde5 ("perf/arm-cmn: Optimise DTC counter accesses")
Reported-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/b41bb4ed7283c3d8400ce5cf5e6ec94915e6750f.1674498637.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Force the internal PHY off then on when switching to the internal path.
This fixes problems where the PHY ID is not properly set.
Fixes: 7090425104db ("net: phy: add amlogic g12a mdio mux support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Co-developed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230124101157.232234-1-jbrunet@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netif_stop_queue() and netif_wake_queue() act on TX queue 0. This is ok
as long as only a single TX queue is supported. But support for multiple
TX queues was introduced with 762031375d5c and I missed to adapt stop
and wake of TX queues.
Use netif_stop_subqueue() and netif_tx_wake_queue() to act on specific
TX queue.
Fixes: 762031375d5c ("tsnep: Support multiple TX/RX queue pairs")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20230124191440.56887-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
During EEH error injection testing, a deadlock was encountered in the tg3
driver when tg3_io_error_detected() was attempting to cancel outstanding
reset tasks:
crash> foreach UN bt
...
PID: 159 TASK: c0000000067c6000 CPU: 8 COMMAND: "eehd"
...
#5 [c00000000681f990] __cancel_work_timer at c00000000019fd18
#6 [c00000000681fa30] tg3_io_error_detected at c00800000295f098 [tg3]
#7 [c00000000681faf0] eeh_report_error at c00000000004e25c
...
PID: 290 TASK: c000000036e5f800 CPU: 6 COMMAND: "kworker/6:1"
...
#4 [c00000003721fbc0] rtnl_lock at c000000000c940d8
#5 [c00000003721fbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c00000003721fc60] process_one_work at c00000000019e5c4
...
PID: 296 TASK: c000000037a65800 CPU: 21 COMMAND: "kworker/21:1"
...
#4 [c000000037247bc0] rtnl_lock at c000000000c940d8
#5 [c000000037247be0] tg3_reset_task at c008000002969358 [tg3]
#6 [c000000037247c60] process_one_work at c00000000019e5c4
...
PID: 655 TASK: c000000036f49000 CPU: 16 COMMAND: "kworker/16:2"
...:1
#4 [c0000000373ebbc0] rtnl_lock at c000000000c940d8
#5 [c0000000373ebbe0] tg3_reset_task at c008000002969358 [tg3]
#6 [c0000000373ebc60] process_one_work at c00000000019e5c4
...
Code inspection shows that both tg3_io_error_detected() and
tg3_reset_task() attempt to acquire the RTNL lock at the beginning of
their code blocks. If tg3_reset_task() should happen to execute between
the times when tg3_io_error_deteced() acquires the RTNL lock and
tg3_reset_task_cancel() is called, a deadlock will occur.
Moving tg3_reset_task_cancel() call earlier within the code block, prior
to acquiring RTNL, prevents this from happening, but also exposes another
deadlock issue where tg3_reset_task() may execute AFTER
tg3_io_error_detected() has executed:
crash> foreach UN bt
PID: 159 TASK: c0000000067d2000 CPU: 9 COMMAND: "eehd"
...
#4 [c000000006867a60] rtnl_lock at c000000000c940d8
#5 [c000000006867a80] tg3_io_slot_reset at c0080000026c2ea8 [tg3]
#6 [c000000006867b00] eeh_report_reset at c00000000004de88
...
PID: 363 TASK: c000000037564000 CPU: 6 COMMAND: "kworker/6:1"
...
#3 [c000000036c1bb70] msleep at c000000000259e6c
#4 [c000000036c1bba0] napi_disable at c000000000c6b848
#5 [c000000036c1bbe0] tg3_reset_task at c0080000026d942c [tg3]
#6 [c000000036c1bc60] process_one_work at c00000000019e5c4
...
This issue can be avoided by aborting tg3_reset_task() if EEH error
recovery is already in progress.
Fixes: db84bf43ef23 ("tg3: tg3_reset_task() needs to use rtnl_lock to synchronize")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230124185339.225806-1-drc@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cxl_pmem.ko module houses the driver for both cxl_nvdimm_bridge
objects and cxl_nvdimm objects. When the core creates a cxl_nvdimm it
arranges for it to be autoremoved when the bridge goes down. However, if
the bridge never initialized because the cxl_pmem.ko module never
loaded, it sets up a the following crash scenario:
BUG: kernel NULL pointer dereference, address: 0000000000000478
[..]
RIP: 0010:cxl_nvdimm_probe+0x99/0x140 [cxl_pmem]
[..]
Call Trace:
<TASK>
cxl_bus_probe+0x17/0x50 [cxl_core]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__driver_attach+0xd2/0x1c0
bus_for_each_dev+0x79/0xc0
bus_add_driver+0x1b1/0x200
driver_register+0x89/0xe0
cxl_pmem_init+0x50/0xff0 [cxl_pmem]
It turns out the recent rework to simplify nvdimm probing obviated the
need to unregister cxl_nvdimm objects at cxl_nvdimm_bridge ->remove()
time. Leave the cxl_nvdimm device registered until the hosting
cxl_memdev departs. The alternative is that the cxl_memdev needs to be
reattached whenever the cxl_nvdimm_bridge attach state cycles, which is
awkward and unnecessary.
The only requirement is to make sure that when the cxl_nvdimm_bridge
goes away any dependent cxl_nvdimm objects are shutdown. Handle that in
unregister_nvdimm_bus().
With these registration entanglements removed there is no longer a need
to pre-load the cxl_pmem module in cxl_acpi.
Fixes: cb9cfff82f6a ("cxl/acpi: Simplify cxl_nvdimm_bridge probing")
Reported-by: Gregory Price <gregory.price@memverge.com>
Debugged-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167426077263.3955046.9695309346988027311.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
struct bkey has internal padding in a union, but it isn't always named
the same (e.g. key ## _pad, key_p, etc). This makes it extremely hard
for the compiler to reason about the available size of copies done
against such keys. Use unsafe_memcpy() for now, to silence the many
run-time false positive warnings:
memcpy: detected field-spanning write (size 264) of single field "&i->j" at drivers/md/bcache/journal.c:152 (size 240)
memcpy: detected field-spanning write (size 24) of single field "&b->key" at drivers/md/bcache/btree.c:939 (size 16)
memcpy: detected field-spanning write (size 24) of single field "&temp.key" at drivers/md/bcache/extents.c:428 (size 16)
Reported-by: Alexandre Pereira <alexpereira@disroot.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216785
Acked-by: Coly Li <colyli@suse.de>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: linux-bcache@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230106060229.never.047-kees@kernel.org
|
|
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why & how]
We still need to refer to port while removing payload at commit_tail.
we should keep the kref till then to release.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Now the vc_start_slot is controlled at drm side. When we
service a long HPD, we still need to run
dm_helpers_dp_mst_write_payload_allocation_table() to update
drm mst_mgr's relevant variable. Otherwise, on the next plug-in,
payload will get assigned with a wrong start slot.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
amdgpu expects to update payload table for one stream one time
by calling dm_helpers_dp_mst_write_payload_allocation_table().
Currently, it get modified to try to update HW payload table
at once by referring mst_state.
[How]
This is just a quick workaround. Should find way to remove the
temporary struct dc_dp_mst_stream_allocation_table later if set
struct link_mst_stream_allocatio directly is possible.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Looks like I made a pretty big mistake here without noticing: it seems when
I moved the assignments of mst_state->pbn_div I completely missed the fact
that the reason for us calling drm_dp_mst_update_slots() earlier was to
account for the fact that we need to call this function using info from the
root MST connector, instead of just trying to do this from each MST
encoder's atomic check function. Otherwise, we end up filling out all of
DC's link information with zeroes.
So, let's restore that and hopefully fix this DSC regression.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Didier Raboud <odyx@debian.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To support new mes ip block
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The GC 11.0.4 needs load IMU to power up GFX before loads GFX firmware.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add SMU13.0.0 AllowIHInterrupt message mapping.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
Rebase of driver has incorrect unconditional trap enablement
for GFX11 when adding mes queues.
Reported-by: Graham Sider <graham.sider@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Graham Sider <graham.sider@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
In order to prevent int340x_thermal_get_trip_type() from possibly
racing with int340x_thermal_read_trips() invoked by int3403_notify()
add locking to it in analogy with int340x_thermal_get_trip_temp().
Fixes: 6757a7abe47b ("thermal: intel: int340x: Protect trip temperature from concurrent updates")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since this driver enables the interrupt by RIC2_QFE1, this driver
should clear the interrupt flag if it happens. Otherwise, the interrupt
causes to hang the system.
Note that this also fix a minor coding style (a comment indentation)
around the fixed code.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After system entered Suspend to RAM, registers setting of this
hardware is reset because the SoC will be turned off. On R-Car Gen3
(info->ccc_gac), ravb_ptp_init() is called in ravb_probe() only. So,
after system resumed, it lacks of the initial settings for ptp. So,
add ravb_ptp_{init,stop}() into ravb_{resume,suspend}().
Fixes: f5d7837f96e5 ("ravb: ptp: Add CONFIG mode support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This turns the Cirrus ep93xx gpio irqchip immutable.
Preserve per-chip labels by adding an ->irq_print_chip() callback.
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Fix wrong translation of irq numbers in port F handler, as ep93xx hwirqs
increased by 1, we should simply decrease them by 1 in translation.
Fixes: 482c27273f52 ("ARM: ep93xx: renumber interrupts")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We recently added locking to this function but one error path was
over looked. Drop the lock before returning.
Fixes: e5464277625c ("gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
My last commit to fix profile mode displays on AMD platforms caused
an issue on Intel platforms - sorry!
In it I was reading the current functional mode (MMC, PSC, AMT) from
the BIOS but didn't account for the fact that on some of our Intel
platforms I use a different API which returns just the profile and not
the functional mode.
This commit fixes it so that on Intel platforms it knows the functional
mode is always MMC.
I also fixed a potential problem that a platform may try to set the mode
for both MMC and PSC - which was incorrect.
Tested on X1 Carbon 9 (Intel) and Z13 (AMD).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963
Fixes: fde5f74ccfc7 ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The namespace head saves the Command Set Indicator enum, so use that
instead of the Command Set Selected. The two values are not the same.
Fixes: 831ed60c2aca2d ("nvme: also return I/O command effects from nvme_command_effects")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit a286ba738714 ("ice: reorder PF/representor devlink
port register/unregister flows") moved the code to create
and destroy the devlink PF port. This was fine, but created
a corner case issue in the case of ice_register_netdev()
failing. In that case, the driver would end up calling
ice_devlink_destroy_pf_port() twice.
Additionally, it makes no sense to tie creation of the devlink
PF port to the creation of the netdev so separate out the
code to create/destroy the devlink PF port from the netdev
code. This makes it a cleaner interface.
Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, all in drivers.
The biggest are the UFS devfreq fixes which address a lock inversion
and the two iscsi_tcp fixes which try to prevent a use after free from
userspace still accessing an area which the kernel has released (seen
by KASAN)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: device_handler: alua: Remove a might_sleep() annotation
scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddress
scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
scsi: ufs: core: Fix devfreq deadlocks
scsi: hpsa: Fix allocation size for scsi_host_alloc()
scsi: target: core: Fix warning on RT kernels
|
|
Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().
But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.
To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().
Fixes: 5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The nvme device may have a namespace with the root partition, so make
sure we've completed scanning before returning from the async probe.
Fixes: eac3ef262941 ("nvme-pci: split the initial probe from the rest path")
Reported-by: Klaus Jensen <its@irrelevant.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Some apple laptop models have an ACPI device with a HID of APP000B
and that device has an IO resource (so it does not describe the new
unsupported MMIO based gmux type), but there actually is no gmux
in the laptop at all.
The gmux_probe() function of the actual apple-gmux driver has code
to detect this, this code has been factored out into a new
apple_gmux_detect() helper in apple-gmux.h.
Use this new function to fix acpi_video_get_backlight_type() wrongly
returning apple_gmux as type on the following laptops:
MacBookPro5,4
https://pastebin.com/8Xjq7RhS
MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg
MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961
MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657
MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142
MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/mast
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-4-hdegoede@redhat.com
|
|
Add a new (static inline) apple_gmux_detect() helper to apple-gmux.h
which can be used for gmux detection instead of apple_gmux_present().
The latter is not really reliable since an ACPI device with a HID
of APP000B is present on some devices without a gmux at all, as well
as on devices with a newer (unsupported) MMIO based gmux model.
This causes apple_gmux_present() to return false-positives on
a number of different Apple laptop models.
This new helper uses the same probing as the actual apple-gmux
driver, so that it does not return false positives.
To avoid code duplication the gmux_probe() function of the actual
driver is also moved over to using the new apple_gmux_detect() helper.
This avoids false positives (vs _HID + IO region detection) on:
MacBookPro5,4
https://pastebin.com/8Xjq7RhS
MacBookPro8,1
https://linux-hardware.org/?probe=e513cfbadb&log=dmesg
MacBookPro9,2
https://bugzilla.kernel.org/attachment.cgi?id=278961
MacBookPro10,2
https://lkml.org/lkml/2014/9/22/657
MacBookPro11,2
https://forums.fedora-fr.org/viewtopic.php?id=70142
MacBookPro11,4
https://raw.githubusercontent.com/im-0/investigate-card-reader-suspend-problem-on-mbp11.4/master/test-16/dmesg
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-3-hdegoede@redhat.com
|
|
This is a preparation patch for adding a new static inline
apple_gmux_detect() helper which actually checks a supported
gmux is present, rather then only checking an ACPI device with
the HID is there as apple_gmux_present() does.
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection")
Link: https://lore.kernel.org/platform-driver-x86/20230123113750.462144-1-hdegoede@redhat.com/
Reported-by: Emmanouil Kouroupakis <kartebi@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230124105754.62167-2-hdegoede@redhat.com
|
