summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-06-10net: move gso declarations and functions to their own filesEric Dumazet
Move declarations into include/net/gso.h and code into net/core/gso.c Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stanislav Fomichev <sdf@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09Merge tag 'wireless-next-2023-06-09' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.5 The second pull request for v6.5. We have support for three new Realtek chipsets, all from different generations. Shows how active Realtek development is right now, even older generations are being worked on. Note: We merged wireless into wireless-next to avoid complex conflicts between the trees. Major changes: rtl8xxxu - RTL8192FU support rtw89 - RTL8851BE support rtw88 - RTL8723DS support ath11k - Multiple Basic Service Set Identifier (MBSSID) and Enhanced MBSSID Advertisement (EMA) support in AP mode iwlwifi - support for segmented PNVM images and power tables - new vendor entries for PPAG (platform antenna gain) feature cfg80211/mac80211 - more Multi-Link Operation (MLO) support such as hardware restart - fixes for a potential work/mutex deadlock and with it beginnings of the previously discussed locking simplifications * tag 'wireless-next-2023-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (162 commits) wifi: rtlwifi: remove misused flag from HAL data wifi: rtlwifi: remove unused dualmac control leftovers wifi: rtlwifi: remove unused timer and related code wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled wifi: brcmfmac: Detect corner error case earlier with log wifi: rtw89: 8852c: update RF radio A/B parameters to R63 wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (3 of 3) wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (2 of 3) wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (1 of 3) wifi: rtw89: process regulatory for 6 GHz power type wifi: rtw89: regd: update regulatory map to R64-R40 wifi: rtw89: regd: judge 6 GHz according to chip and BIOS wifi: rtw89: refine clearing supported bands to check 2/5 GHz first wifi: rtw89: 8851b: configure CRASH_TRIGGER feature for 8851B wifi: rtw89: set TX power without precondition during setting channel wifi: rtw89: debug: txpwr table access only valid page according to chip wifi: rtw89: 8851b: enable hw_scan support wifi: cfg80211: move scan done work to wiphy work wifi: cfg80211: move sched scan stop to wiphy work ... ==================== Link: https://lore.kernel.org/r/87bkhohkbg.fsf@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09net: phy: broadcom: Add support for setting LED brightnessFlorian Fainelli
Broadcom PHYs have two LEDs selector registers which allow us to control the LED assignment, including how to turn them on/off. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09net: phy: broadcom: Rename LED registersFlorian Fainelli
These registers are common to most PHYs and are not specific to the BCM5482, renamed the constants accordingly, no functional change. Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09usbnet: ipheth: update Kconfig descriptionFoster Snowhill
This module has for a long time not been limited to iPhone <= 3GS. Update description to match the actual state of the driver. Remove dead link from 2010, instead reference an existing userspace iOS device pairing implementation as part of libimobiledevice. Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09usbnet: ipheth: add CDC NCM supportFoster Snowhill
Recent iOS releases support CDC NCM encapsulation on RX. This mode is the default on macOS and Windows. In this mode, an iOS device may include one or more Ethernet frames inside a single URB. Freshly booted iOS devices start in legacy mode, but are put into NCM mode by the official Apple driver. When reconnecting such a device from a macOS/Windows machine to a Linux host, the device stays in NCM mode, making it unusable with the legacy ipheth driver code. To correctly support such a device, the driver has to either support the NCM mode too, or put the device back into legacy mode. To match the behaviour of the macOS/Windows driver, and since there is no documented control command to revert to legacy mode, implement NCM support. The device is attempted to be put into NCM mode by default, and falls back to legacy mode if the attempt fails. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09usbnet: ipheth: transmit URBs without trailing paddingFoster Snowhill
The behaviour of the official iOS tethering driver on macOS is to not transmit any trailing padding at the end of URBs. This is applicable to both NCM and legacy modes, including older devices. Adapt the driver to not include trailing padding in TX URBs, matching the behaviour of the official macOS driver. Signed-off-by: Foster Snowhill <forst@pen.gy> Tested-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09usbnet: ipheth: fix risk of NULL pointer deallocationGeorgi Valkov
The cleanup precedure in ipheth_probe will attempt to free a NULL pointer in dev->ctrl_buf if the memory allocation for this buffer is not successful. While kfree ignores NULL pointers, and the existing code is safe, it is a better design to rearrange the goto labels and avoid this. Signed-off-by: Georgi Valkov <gvalkov@gmail.com> Signed-off-by: Foster Snowhill <forst@pen.gy> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-08chelsio/chtls: Use splice_eof() to flushDavid Howells
Allow splice to end a Chelsio TLS record after prematurely ending a splice/sendfile due to getting an EOF condition (->splice_read() returned 0) after splice had called sendmsg() with MSG_MORE set when the user didn't set MSG_MORE. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/CAHk-=wh=V579PDYvkpnTobCLGczbgxpMgGmmhqiTyE34Cpi5Gg@mail.gmail.com/ Signed-off-by: David Howells <dhowells@redhat.com> cc: Ayush Sawal <ayush.sawal@chelsio.com> cc: Jens Axboe <axboe@kernel.dk> cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08Merge tag 'mlx5-updates-2023-06-06' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-06-06 1) Support 4 ports VF LAG, part 2/2 2) Few extra trivial cleanup patches Shay Drory Says: ================ Support 4 ports VF LAG, part 2/2 This series continues the series[1] "Support 4 ports VF LAG, part1/2". This series adds support for 4 ports VF LAG (single FDB E-Switch). This series of patches refactoring LAG code that make assumptions about VF LAG supporting only two ports and then enable 4 ports VF LAG. Patch 1: - Fix for ib rep code Patches 2-5: - Refactors LAG layer. Patches 6-7: - Block LAG types which doesn't support 4 ports. Patch 8: - Enable 4 ports VF LAG. This series specifically allows HCAs with 4 ports to create a VF LAG with only 4 ports. It is not possible to create a VF LAG with 2 or 3 ports using HCAs that have 4 ports. Currently, the Merged E-Switch feature only supports HCAs with 2 ports. However, upcoming patches will introduce support for HCAs with 4 ports. In order to activate VF LAG a user can execute: devlink dev eswitch set pci/0000:08:00.0 mode switchdev devlink dev eswitch set pci/0000:08:00.1 mode switchdev devlink dev eswitch set pci/0000:08:00.2 mode switchdev devlink dev eswitch set pci/0000:08:00.3 mode switchdev ip link add name bond0 type bond ip link set dev bond0 type bond mode 802.3ad ip link set dev eth2 master bond0 ip link set dev eth3 master bond0 ip link set dev eth4 master bond0 ip link set dev eth5 master bond0 Where eth2, eth3, eth4 and eth5 are net-interfaces of pci/0000:08:00.0 pci/0000:08:00.1 pci/0000:08:00.2 pci/0000:08:00.3 respectively. User can verify LAG state and type via debugfs: /sys/kernel/debug/mlx5/0000\:08\:00.0/lag/state /sys/kernel/debug/mlx5/0000\:08\:00.0/lag/type [1] https://lore.kernel.org/netdev/20230601060118.154015-1-saeed@kernel.org/T/#mf1d2083780970ba277bfe721554d4925f03f36d1 ================ * tag 'mlx5-updates-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: simplify condition after napi budget handling change mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager net/mlx5: Skip inline mode check after mlx5_eswitch_enable_locked() failure net/mlx5e: TC, refactor access to hash key net/mlx5e: Remove RX page cache leftovers net/mlx5e: Expose catastrophic steering error counters net/mlx5: Enable 4 ports VF LAG net/mlx5: LAG, block multiport eswitch LAG in case ldev have more than 2 ports net/mlx5: LAG, block multipath LAG in case ldev have more than 2 ports net/mlx5: LAG, change mlx5_shared_fdb_supported() to static net/mlx5: LAG, generalize handling of shared FDB net/mlx5: LAG, check if all eswitches are paired for shared FDB {net/RDMA}/mlx5: introduce lag_for_each_peer RDMA/mlx5: Free second uplink ib port ==================== Link: https://lore.kernel.org/r/20230607210410.88209-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: fman_memac: use pcs-lynx's check for fwnode availabilityRussell King (Oracle)
Use pcs-lynx's check rather than our own when determining if the device is available. This fixes a bug where the reference gained by of_parse_phandle() is not dropped if the device is not available. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: dpaa2: use pcs-lynx's check for fwnode availabilityRussell King (Oracle)
Use pcs-lynx's check rather than our own when determining if the device is available. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: pcs: lynx: check that the fwnode is available prior to useRussell King (Oracle)
Check that the fwnode is marked as available prior to trying to lookup the PCS device, and return -ENODEV if unavailable. Document the return codes from lynx_pcs_create_fwnode(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: pcs: lynx: change lynx_pcs_create() to return error-pointersRussell King (Oracle)
Change lynx_pcs_create() to return an error-pointer on failure to allocate memory, rather than returning NULL. This allows the removal of the conversion in lynx_pcs_create_fwnode() and lynx_pcs_create_mdiodev(). Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: pcs: lynx: make lynx_pcs_create() staticRussell King (Oracle)
We no longer need to export lynx_pcs_create() for drivers to use as we now have all the functionality we need in the two new creation helpers. Remove the export and prototype, and make it static. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: fman_memac: use lynx_pcs_create_fwnode()Russell King (Oracle)
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: dpaa2-mac: use lynx_pcs_create_fwnode()Russell King (Oracle)
Use lynx_pcs_create_fwnode() to create a lynx PCS from a fwnode handle. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: pcs: lynx: add lynx_pcs_create_fwnode()Russell King (Oracle)
Add a helper to create a lynx PCS from a fwnode handle. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: pcs: lynx: remove lynx_get_mdio_device()Russell King (Oracle)
lynx_get_mdio_device() is no longer necessary, let's remove it so the lynx PCS code is always managing the lifetime of the mdiodev. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: fman_memac: allow lynx PCS to handle mdiodev lifetimeRussell King (Oracle)
Put the mdiodev after lynx_pcs_create() so that the Lynx PCS driver can manage the lifetime of the mdiodev its using. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: dpaa2-mac: allow lynx PCS to manage mdiodev lifetimeRussell King (Oracle)
Put the mdiodev after lynx_pcs_create() so that the Lynx PCS driver can manage the lifetime of the mdiodev its using. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: pch_gbe: Allow build on MIPS_GENERIC kernelJiaxun Yang
MIPS Boston board, which is using MIPS_GENERIC kernel is using EG20T PCH and thus need this driver. Dependency of PCH_GBE, PTP_1588_CLOCK_PCH is also fixed for MIPS_GENERIC. Note that CONFIG_PCH_GBE is selected in arch/mips/configs/generic/ board-boston.config for a while, some how it's never wired up in Kconfig. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230607055953.34110-1-jiaxun.yang@flygoat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08mlxsw: spectrum_nve_vxlan: Fix unsupported flag regressionIdo Schimmel
The recently added 'VXLAN_F_LOCALBYPASS' flag is set by default on VXLAN devices and denotes a behavior that is irrelevant for the hardware data path. Add it to the lists of IPv4 and IPv6 supported flags to avoid rejecting offload of VXLAN devices which have this flag set. Fixes: 69474a8a5837 ("net: vxlan: Add nolocalbypass option to vxlan.") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/5533e63643bf719bbe286fef60f749c9cad35005.1686139716.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/sch_taprio.c d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping") dced11ef84fb ("net/sched: taprio: don't overwrite "sch" variable in taprio_dump_class_stats()") net/ipv4/sysctl_net_ipv4.c e209fee4118f ("net/ipv4: ping_group_range: allow GID from 2147483648 to 4294967294") ccce324dabfe ("tcp: make the first N SYN RTO backoffs linear") https://lore.kernel.org/all/20230605100816.08d41a7b@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08Merge tag 'net-6.4-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can, wifi, netfilter, bluetooth and ebpf. Current release - regressions: - bpf: sockmap: avoid potential NULL dereference in sk_psock_verdict_data_ready() - wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif() - phylink: actually fix ksettings_set() ethtool call - eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3 Current release - new code bugs: - wifi: mt76: fix possible NULL pointer dereference in mt7996_mac_write_txwi() Previous releases - regressions: - netfilter: fix NULL pointer dereference in nf_confirm_cthelper - wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS - openvswitch: fix upcall counter access before allocation - bluetooth: - fix use-after-free in hci_remove_ltk/hci_remove_irk - fix l2cap_disconnect_req deadlock - nic: bnxt_en: prevent kernel panic when receiving unexpected PHC_UPDATE event Previous releases - always broken: - core: annotate rfs lockless accesses - sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values - netfilter: add null check for nla_nest_start_noflag() in nft_dump_basechain_hook() - bpf: fix UAF in task local storage - ipv4: ping_group_range: allow GID from 2147483648 to 4294967294 - ipv6: rpl: fix route of death. - tcp: gso: really support BIG TCP - mptcp: fixes for user-space PM address advertisement - smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT - can: avoid possible use-after-free when j1939_can_rx_register fails - batman-adv: fix UaF while rescheduling delayed work - eth: qede: fix scheduling while atomic - eth: ice: make writes to /dev/gnssX synchronous" * tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event bnxt_en: Skip firmware fatal error recovery if chip is not accessible bnxt_en: Query default VLAN before VNIC setup on a VF bnxt_en: Don't issue AP reset during ethtool's reset operation bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg() net: bcmgenet: Fix EEE implementation eth: ixgbe: fix the wake condition eth: bnxt: fix the wake condition lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() bpf: Add extra path pointer check to d_path helper net: sched: fix possible refcount leak in tc_chain_tmplt_add() net: sched: act_police: fix sparse errors in tcf_police_dump() net: openvswitch: fix upcall counter access before allocation net: sched: move rtm_tca_policy declaration to include file ice: make writes to /dev/gnssX synchronous net: sched: add rcu annotations around qdisc->qdisc_sleeping rfs: annotate lockless accesses to RFS sock flow table rfs: annotate lockless accesses to sk->sk_rxhash virtio_net: use control_buf for coalesce params ...
2023-06-08wifi: rtlwifi: remove misused flag from HAL dataDmitry Antipov
Always rely on 'driver_is_goingto_unload' of 'struct rtl_hal' and remove (presumably misused) 'driver_going2unload' from it. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230605100700.111644-1-dmantipov@yandex.ru
2023-06-08wifi: rtlwifi: remove unused dualmac control leftoversDmitry Antipov
Remove 'struct rtl_dualmac_easy_concurrent_ctl' of 'struct rtl_priv' and related code in '_rtl_pci_tx_chk_waitq()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602065940.149198-2-dmantipov@yandex.ru
2023-06-08wifi: rtlwifi: remove unused timer and related codeDmitry Antipov
Drop unused 'dualmac_easyconcurrent_retrytimer' of 'struct rtl_works', corresponding 'rtl_easy_concurrent_retrytimer_callback()' handler, 'dualmac_easy_concurrent' function pointer of 'struct rtl_hal_ops' and related call to 'timer_setup()' in '_rtl_init_deferred_work()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602065940.149198-1-dmantipov@yandex.ru
2023-06-08wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdownMarek Vasut
It makes no sense to set MMC_PM_KEEP_POWER in shutdown. The flag indicates to the MMC subsystem to keep the slot powered on during suspend, but in shutdown the slot should actually be powered off. Drop this call. Fixes: 063848c3e155 ("rsi: sdio: Add WOWLAN support for S5 shutdown state") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230527222859.273768-1-marex@denx.de
2023-06-08wifi: rsi: Do not configure WoWlan in shutdown hook if not enabledMarek Vasut
In case WoWlan was never configured during the operation of the system, the hw->wiphy->wowlan_config will be NULL. rsi_config_wowlan() checks whether wowlan_config is non-NULL and if it is not, then WARNs about it. The warning is valid, as during normal operation the rsi_config_wowlan() should only ever be called with non-NULL wowlan_config. In shutdown this rsi_config_wowlan() should only ever be called if WoWlan was configured before by the user. Add checks for non-NULL wowlan_config into the shutdown hook. While at it, check whether the wiphy is also non-NULL before accessing wowlan_config . Drop the single-use wowlan_config variable, just inline it into function call. Fixes: 16bbc3eb8372 ("rsi: fix null pointer dereference during rsi_shutdown()") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230527222833.273741-1-marex@denx.de
2023-06-08wifi: brcmfmac: Detect corner error case earlier with logNeal Sidhwaney
In brcmf_chip_recognition(), the return value from an MMIO read is interpreted as various fields without checking if it failed, which is harmless today, as the interpreted fields are checked for validity a few lines below. However, in corner cases (on my MacbookPro 14,1, sometimes after waking from sleep or soft reboot), when this happens, it causes the logging to be misleading, because the message indicates an unsupported chip type ("brcmfmac: brcmf_chip_recognition: chip backplane type 15 is not supported"). This patch detects this case slightly earlier and logs an appropriate message, with the same return result as is the case today. Signed-off-by: Neal Sidhwaney <nealsid@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230603060021.57225-1-nealsid@gmail.com
2023-06-08wifi: rtw89: 8852c: update RF radio A/B parameters to R63Ping-Ke Shih
Update 8852c radio A/B parameters from internal HALRF_029_00_102 R63. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-9-pkshih@realtek.com
2023-06-08wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (3 of 3)Zong-Zhe Yang
Update TX power tables to RF version R63. TX power tables' changes: * TX power byrate: tweak a bit * TX power limit, TX power limit RU, TX power shape: configure values for MEXICO, UKRAINE, CHILE, QATAR tweak a bit on other configured values * 6 GHz TX power limit, 6 GHz TX power limit RU: add an extra dimension for 6 GHz regulatory power type, i.e. STD (standard power), LPI (low power indoor), VLP (very low power) Besides, we adjust TX power handling at 6 GHz in phy to consider 6 GHz regulatory power type. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-8-pkshih@realtek.com
2023-06-08wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (2 of 3)Zong-Zhe Yang
Update TX power tables to RF version R63. TX power tables' changes: * TX power byrate: tweak a bit * TX power limit, TX power limit RU, TX power shape: configure values for MEXICO, UKRAINE, CHILE, QATAR tweak a bit on other configured values * 6 GHz TX power limit, 6 GHz TX power limit RU: add an extra dimension for 6 GHz regulatory power type, i.e. STD (standard power), LPI (low power indoor), VLP (very low power) Besides, we adjust TX power handling at 6 GHz in phy to consider 6 GHz regulatory power type. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-7-pkshih@realtek.com
2023-06-08wifi: rtw89: 8852c: update TX power tables to R63 with 6 GHz power type (1 of 3)Zong-Zhe Yang
Update TX power tables to RF version R63. TX power tables' changes: * TX power byrate: tweak a bit * TX power limit, TX power limit RU, TX power shape: configure values for MEXICO, UKRAINE, CHILE, QATAR tweak a bit on other configured values * 6 GHz TX power limit, 6 GHz TX power limit RU: add an extra dimension for 6 GHz regulatory power type, i.e. STD (standard power), LPI (low power indoor), VLP (very low power) Besides, we adjust TX power handling at 6 GHz in phy to consider 6 GHz regulatory power type. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-6-pkshih@realtek.com
2023-06-08wifi: rtw89: process regulatory for 6 GHz power typeZong-Zhe Yang
Configure the corresponding power type for 6 GHz regulatory if we can determine one single target. Otherwise, we use the default one. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-5-pkshih@realtek.com
2023-06-08wifi: rtw89: regd: update regulatory map to R64-R40Zong-Zhe Yang
Update notes: According to Realtek Regulatory R40 and Realtek Channel Plan R64, configure rtw89_regulatory mapping of 6 GHz for more countries and adjust rtw89_regulatory mapping of 2/5 GHz for a few countries. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-4-pkshih@realtek.com
2023-06-08wifi: rtw89: regd: judge 6 GHz according to chip and BIOSZong-Zhe Yang
We allow platform to disable 6 GHz on chips, which supports 6 GHz, through BIOS. Driver will evaluate Realtek acpi DSM with RTW89_ACPI_DSM_FUNC_6G_DIS (function 3) to get whether 6 GHz should be disabled. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-3-pkshih@realtek.com
2023-06-08wifi: rtw89: refine clearing supported bands to check 2/5 GHz firstZong-Zhe Yang
We refine to check if supported bands of NL80211_BAND_2GHZ and NL80211_BAND_5GHZ exist before freeing their iftype_data. For now, it does not really encounter problems because all current chips support both 2 GHz and 5 GHz. But, driver actually allows chips to declare whether 2/5 GHz are supported or not. In case some future chips really don't support them, we refine this code. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230602150556.36777-2-pkshih@realtek.com
2023-06-08wifi: rtw89: 8851b: configure CRASH_TRIGGER feature for 8851BZong-Zhe Yang
RTL8851B firmware supports CRASH_TRIGGER feature from v0.29.41.0. After this is configured, debugfs fw_crash can support type 1 on RTL8851B to trigger firmware crash and verify L2 recovery through simulation. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230531060713.57203-5-pkshih@realtek.com
2023-06-08wifi: rtw89: set TX power without precondition during setting channelZong-Zhe Yang
The key condition to check in wrapper of setting TX power is whether entity is active or not. Before entity is active, we restrict TX power from being set by outside callers, e.g. SAR/regulatory. We mark entity as inactive when powering off MAC. Then, we will mark it as active when we initialize HW channel stuffs after MAC power on. Although we can get an active entity after leaving idle phase, TX power doesn't be set well for default channel until stack set target channel for connection. It causes that RF things cannot use better TX power during this interval. Below are some cases which may encounter this or a similar situation. * hw scan process before connection As described above. * right after restart hardware process (SER L2) HW stuffs of target channel is initialized after mac80211 restart hardware, but we unexpectedly need to wait one more command to set channel again or to set TX power. To fix it and improve RF behavior in that interval, during setting channel, we don't need to check entity state before setting TX power, which actually is used to restrict outside callers. It means we call chip ops directly to replace the wrapper call. Then, TX power can be initialized as long as we initialize/setup HW stuffs on one channel. Besides, all chips should configure ops of setting TX power, so we remove trivial check on pointer. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230531060713.57203-4-pkshih@realtek.com
2023-06-08wifi: rtw89: debug: txpwr table access only valid page according to chipZong-Zhe Yang
We now support RTL8851B which has only single RF path. For chip with single RF path, TX power page is valid only in single path section. So, we refine debugfs txpwr table to access TX power page according to RF path number of runtime chip. It can prevent us from reading beyond valid sections. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230531060713.57203-3-pkshih@realtek.com
2023-06-08wifi: rtw89: 8851b: enable hw_scan supportPo-Hao Huang
This enables hw_scan for 8851b after firmware version 0.29.37.1. Extend the channel info struct with padding zeros so newer firmware can work properly, this change is backward compatible with older firmware. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230531060713.57203-2-pkshih@realtek.com
2023-06-08net: txgbe: Support phylink MAC layerJiawen Wu
Add phylink support to Wangxun 10Gb Ethernet controller for the 10GBASE-R interface. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: txgbe: Implement phylink pcsJiawen Wu
Register MDIO bus for PCS layer to use Synopsys designware XPCS, support 10GBASE-R interface to the controller. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: pcs: Add 10GBASE-R mode for Synopsys Designware XPCSJiawen Wu
Add basic support for XPCS using 10GBASE-R interface. This mode will be extended to use interrupt, so set pcs.poll false. And avoid soft reset so that the device using this mode is in the default configuration. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: txgbe: Support GPIO to SFP socketJiawen Wu
Register GPIO chip and handle GPIO IRQ for SFP socket. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: txgbe: Add SFP module identifyJiawen Wu
Register SFP platform device to get modules information. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: txgbe: Register I2C platform deviceJiawen Wu
Register the platform device to use Designware I2C bus master driver. Use regmap to read/write I2C device region from given base offset. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: txgbe: Register fixed rate clockJiawen Wu
In order for I2C to be able to work in standard mode, register a fixed rate clock for each I2C device. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-29 01:20:47 +0000