| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Ensure that the compiler and linker versions are aligned so that ld
doesn't complain about not understanding a .note.gnu.property section
(emitted when pointer authentication is enabled).
- Force -mbranch-protection=none when the feature is not enabled, in
case a compiler may choose a different default value.
- Remove CONFIG_DEBUG_ALIGN_RODATA. It was never in defconfig and
rarely enabled.
- Fix checking 16-bit Thumb-2 instructions checking mask in the
emulation of the SETEND instruction (it could match the bottom half
of a 32-bit Thumb-2 instruction).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: armv8_deprecated: Fix undef_hook mask for thumb setend
arm64: remove CONFIG_DEBUG_ALIGN_RODATA feature
arm64: Always force a branch protection mode when the compiler has one
arm64: Kconfig: ptrauth: Add binutils version check to fix mismatch
init/kconfig: Add LD_VERSION Kconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of new features:
- Partial support for the Kendryte K210.
There are still a few outstanding issues that I have patches for,
but I don't actually have a board to test them so they're not
included yet.
- SBI v0.2 support.
- Fixes to support for building with LLVM-based toolchains. The
resulting images are known not to boot yet.
I don't anticipate a part two, but I'll probably have something early
in the RCs to finish up the K210 support"
* tag 'riscv-for-linus-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (38 commits)
riscv: create a loader.bin boot image for Kendryte SoC
riscv: Kendryte K210 default config
riscv: Add Kendryte K210 device tree
riscv: Select required drivers for Kendryte SOC
riscv: Add Kendryte K210 SoC support
riscv: Add SOC early init support
riscv: Unaligned load/store handling for M_MODE
RISC-V: Support cpu hotplug
RISC-V: Add supported for ordered booting method using HSM
RISC-V: Add SBI HSM extension definitions
RISC-V: Export SBI error to linux error mapping function
RISC-V: Add cpu_ops and modify default booting method
RISC-V: Move relocate and few other functions out of __init
RISC-V: Implement new SBI v0.2 extensions
RISC-V: Introduce a new config for SBI v0.1
RISC-V: Add SBI v0.2 extension definitions
RISC-V: Add basic support for SBI v0.2
RISC-V: Mark existing SBI as 0.1 SBI.
riscv: Use macro definition instead of magic number
riscv: Add support to dump the kernel page tables
...
|
|
Pull ceph updates from Ilya Dryomov:
"The main items are:
- support for asynchronous create and unlink (Jeff Layton).
Creates and unlinks are satisfied locally, without waiting for a
reply from the MDS, provided the client has been granted
appropriate caps (new in v15.y.z ("Octopus") release). This can be
a big help for metadata heavy workloads such as tar and rsync.
Opt-in with the new nowsync mount option.
- multiple blk-mq queues for rbd (Hannes Reinecke and myself).
When the driver was converted to blk-mq, we settled on a single
blk-mq queue because of a global lock in libceph and some other
technical debt. These have since been addressed, so allocate a
queue per CPU to enhance parallelism.
- don't hold onto caps that aren't actually needed (Zheng Yan).
This has been our long-standing behavior, but it causes issues with
some active/standby applications (synchronous I/O, stalls if the
standby goes down, etc).
- .snap directory timestamps consistent with ceph-fuse (Luis
Henriques)"
* tag 'ceph-for-5.7-rc1' of git://github.com/ceph/ceph-client: (49 commits)
ceph: fix snapshot directory timestamps
ceph: wait for async creating inode before requesting new max size
ceph: don't skip updating wanted caps when cap is stale
ceph: request new max size only when there is auth cap
ceph: cleanup return error of try_get_cap_refs()
ceph: return ceph_mdsc_do_request() errors from __get_parent()
ceph: check all mds' caps after page writeback
ceph: update i_requested_max_size only when sending cap msg to auth mds
ceph: simplify calling of ceph_get_fmode()
ceph: remove delay check logic from ceph_check_caps()
ceph: consider inode's last read/write when calculating wanted caps
ceph: always renew caps if mds_wanted is insufficient
ceph: update dentry lease for async create
ceph: attempt to do async create when possible
ceph: cache layout in parent dir on first sync create
ceph: add new MDS req field to hold delegated inode number
ceph: decode interval_sets for delegated inos
ceph: make ceph_fill_inode non-static
ceph: perform asynchronous unlink if we have sufficient caps
ceph: don't take refs to want mask unless we have all bits
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a Kconfig dependency for hisilicon as well as a double free
in marvell/octeontx"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: marvell/octeontx - fix double free of ptr
crypto: hisilicon - Fix build error
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add TI K3 RTI watchdog
- add stop_on_reboot parameter to control reboot policy
- wm831x_wdt: Remove GPIO handling
- several small fixes, improvements and clean-ups
* tag 'linux-watchdog-5.7-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Add K3 RTI watchdog support
dt-bindings: watchdog: Add support for TI K3 RTI watchdog
watchdog: ziirave_wdt: change name to be more specific
watchdog: orion: use 0 for unset heartbeat
watchdog: npcm: remove whitespaces
watchdog: reset last_hw_keepalive time at start
watchdog: imx2_wdt: Drop .remove callback
watchdog: Add stop_on_reboot parameter to control reboot policy
watchdog: wm831x_wdt: Remove GPIO handling
watchdog: imx7ulp: Remove unused include of init.h
watchdog: imx_sc_wdt: Remove unused includes
watchdog: qcom: Use irq flags from firmware
watchdog: pm8916_wdt: Add system sleep callbacks
watchdog: qcom-wdt: disable pretimeout on timer platform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
cros-usbpd-notify and cros_ec_typec:
- Add a new notification driver that handles and dispatches USB PD
related events to other drivers.
- Add a Type C connector class driver for cros_ec
CrOS EC:
- Introduce a new cros_ec_cmd_xfer_status helper
Sensors/iio:
- A series from Gwendal that adds Cros EC sensor hub FIFO support
Wilco EC:
- Fix a build warning.
- Platform data shouldn't include kernel.h
Misc:
- i2c api conversion complete, with i2c_new_client_device instead of
i2c_new_device in chromeos_laptop.
- Replace zero-length array with flexible-array member in
cros_ec_chardev and wilco_ec
- Update new structure for SPI transfer delays in cros_ec_spi
* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
iio: cros_ec: Use Hertz as unit for sampling frequency
iio: cros_ec: Report hwfifo_watermark_max
iio: cros_ec: Expose hwfifo_timeout
iio: cros_ec: Remove pm function
iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
iio: expose iio_device_set_clock
iio: cros_ec: Move function description to .c file
platform/chrome: cros_ec_sensorhub: Add median filter
platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
platform/chrome: cros_ec_sensorhub: Add FIFO support
platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
platform/chrome: chromeos_laptop: make I2C API conversion complete
platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
platform/chrome: cros_ec_typec: Update port info from EC
platform/chrome: Add Type C connector class driver
platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
platform/chrome: cros_usbpd_notify: Add driver data struct
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU support for the TLB range invalidation command in SMMUv3.2
- ARM-SMMU introduction of command batching helpers to batch up CD and
ATC invalidation
- ARM-SMMU support for PCI PASID, along with necessary PCI symbol
exports
- Introduce a generic (actually rename an existing) IOMMU related
pointer in struct device and reduce the IOMMU related pointers
- Some fixes for the OMAP IOMMU driver to make it build on 64bit
architectures
- Various smaller fixes and improvements
* tag 'iommu-updates-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
iommu: Move fwspec->iommu_priv to struct dev_iommu
iommu/virtio: Use accessor functions for iommu private data
iommu/qcom: Use accessor functions for iommu private data
iommu/mediatek: Use accessor functions for iommu private data
iommu/renesas: Use accessor functions for iommu private data
iommu/arm-smmu: Use accessor functions for iommu private data
iommu/arm-smmu: Refactor master_cfg/fwspec usage
iommu/arm-smmu-v3: Use accessor functions for iommu private data
iommu: Introduce accessors for iommu private data
iommu/arm-smmu: Fix uninitilized variable warning
iommu: Move iommu_fwspec to struct dev_iommu
iommu: Rename struct iommu_param to dev_iommu
iommu/tegra-gart: Remove direct access of dev->iommu_fwspec
drm/msm/mdp5: Remove direct access of dev->iommu_fwspec
ACPI/IORT: Remove direct access of dev->iommu_fwspec
iommu: Define dev_iommu_fwspec_get() for !CONFIG_IOMMU_API
iommu/virtio: Reject IOMMU page granule larger than PAGE_SIZE
iommu/virtio: Fix freeing of incomplete domains
iommu/virtio: Fix sparse warning
iommu/vt-d: Add build dependency on IOASID
...
|
|
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
|
|
Pull drm fixes from Dave Airlie:
"This is a set of fixes that have queued up, I think I might have
another pull with some more before rc1 but I'd like to dequeue what I
have now just in case Easter is more eggciting that expected.
The main thing in here is a fix for a longstanding nouveau power
management issues on certain laptops, it should help runtime
suspend/resume for a lot of people.
There is also a reverted patch for some drm_mm behaviour in atomic
contexts.
Summary:
core:
- revert drm_mm atomic patch
- dt binding fixes
fbcon:
- null ptr error fix
i915:
- GVT fixes
nouveau:
- runpm fix
- svm fixes
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
vboxvideo:
- remove conflicting fbs
vc4:
- mode validation fix
xen:
- fix PTR_ERR usage"
* tag 'drm-next-2020-04-08' of git://anongit.freedesktop.org/drm/drm: (41 commits)
drm/nouveau/kms/nv50-: wait for FIFO space on PIO channels
drm/nouveau/nvif: protect waits against GPU falling off the bus
drm/nouveau/nvif: access PTIMER through usermode class, if available
drm/nouveau/gr/gp107,gp108: implement workaround for HW hanging during init
drm/nouveau: workaround runpm fail by disabling PCI power management on certain intel bridges
drm/nouveau/svm: remove useless SVM range check
drm/nouveau/svm: check for SVM initialized before migrating
drm/nouveau/svm: fix vma range check for migration
drm/nouveau: remove checks for return value of debugfs functions
drm/nouveau/ttm: evict other IO mappings when running out of BAR1 space
drm/amdkfd: kfree the wrong pointer
drm/amd/display: increase HDCP authentication delay
drm/amd/display: Correctly cancel future watchdog and callback events
drm/amd/display: Don't try hdcp1.4 when content_type is set to type1
drm/amd/powerplay: move the ASIC specific nbio operation out of smu_v11_0.c
drm/amd/powerplay: drop redundant BIF doorbell interrupt operations
drm/amd/display: Fix dcn21 num_states
drm/amd/display: Enable BT2020 in COLOR_ENCODING property
drm/amd/display: LFC not working on 2.0x range monitors (v2)
drm/amd/display: Support plane level CTM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"An update to the Goodix touchscreen driver to enable it work properly
on various Bay Trail and Cherry Trail devices, and a few other
assorted changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
Input: update SPDX tag for input-event-codes.h
Input: i8042 - add Acer Aspire 5738z to nomux list
Input: goodix - fix compilation when ACPI support is disabled
dt-bindings: touchscreen: Convert edt-ft5x06 to json-schema
Input: of_touchscreen - explicitly choose axis
Input: goodix - support gt9147 touchpanel
dt-bindings: touchscreen: goodix: support of gt9147
Input: goodix - add support for Goodix GT917S
Input: goodix - use string-based chip ID
dt-bindings: input: touchscreen: add compatible string for Goodix GT917S
Input: goodix - add support for more then one touch-key
Input: goodix - fix spurious key release events
Input: goodix - try to reset the controller if the i2c-test fails
Input: goodix - restore config on resume if necessary
Input: goodix - make goodix_send_cfg() take a raw buffer as argument
Input: goodix - add minimum firmware size check
Input: goodix - save a copy of the config from goodix_read_config()
Input: goodix - move defines to above struct goodix_ts_data declaration
Input: goodix - add support for controlling the IRQ pin through ACPI methods
Input: goodix - add support for getting IRQ + reset GPIOs on Bay Trail devices
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"New Drivers:
- Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors
New Device Support:
- Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC
- Add support for Comet Lake to Intel LPSS
New Functionality:
- Add support for Charger Detection to Spreadtrum SC27xx PMICs
- Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC
- Add ACPI enumeration support to Diolan DLN2 USB Adaptor
Fix-ups:
- Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847
- I2C registration; rn5t618
- Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1
- Use flexible-array members; omap-usb-tll, qcom-pm8xxx
- Remove unnecessary casts; omap-usb-host, omap-usb-tll
- Power (suspend/resume/poweroff) enhancements; rk808
- Improve error/sanity checking; dln2
- Use snprintf(); aat2870-core
Bug Fixes:
- Fix PCI IDs in intel-lpss-pci"
* tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits)
mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock
mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow
mfd: dln2: Allow to be enumerated via ACPI
mfd: da9062: Add support for interrupt polarity defined in device tree
dt-bindings: bd718x7: Yamlify and add BD71850
mfd: dln2: Fix sanity checking for endpoints
mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs
mfd: sc27xx: Add USB charger type detection support
dt-bindings: mfd: Document STM32 low power timer bindings
mfd: rk808: Convert RK805 to shutdown/suspend hooks
mfd: rk808: Reduce shutdown duplication
mfd: rk808: Stop using syscore ops
mfd: rk808: Ensure suspend/resume hooks always work
mfd: rk808: Always use poweroff when requested
mfd: omap: Remove useless cast for driver.name
mfd: Kconfig: Fix some misspelling of the word functionality
mfd: pm8xxx: Replace zero-length array with flexible-array member
mfd: omap-usb-tll: Replace zero-length array with flexible-array member
mfd: cpcap: Fix compile if MFD_CORE is not selected
mfd: cros_ec: Check DT node for usbpd-notify add
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Switch pwm_bl and corgi_lcd drivers to use GPIO descriptors"
* tag 'backlight-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: corgi: Convert to use GPIO descriptors
backlight: pwm_bl: Switch to full GPIO descriptor
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"One new driver, some driver changes, and some late minute cleanups --
but those are just whitespace so should be okay.
There are some major changes being prepared (multicolor, triggers) so
the next release likely will be more interesting"
* tag 'leds-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: core: Fix warning message when init_data
leds: make functions easier to understand
leds: sort Makefile entries
leds: old enums are not really applicable to new code
leds: ip30: label power LED as such
leds: lm3532: make bitfield 'enabled' unsigned
leds: leds-pwm: Replace zero-length array with flexible-array member
leds: leds-is31fl32xx: Replace zero-length array with flexible-array member
leds: pwm: remove useless pwm_period_ns
leds: pwm: remove header
leds: pwm: convert to atomic PWM API
leds: pwm: simplify if condition
leds: add SGI IP30 led support
leds: lm3697: fix spelling mistake "To" -> "Too"
leds: leds-bd2802: remove set but not used variable 'pdata'
leds: ns2: Convert to GPIO descriptors
leds: ns2: Absorb platform data
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.7-2020-04-01:
amdgpu:
- HDCP fixes
- gfx10 fix
- Misc display fixes
- BACO fixes
amdkfd:
- Fix memory leak
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200401194619.4217-1-alexander.deucher@amd.com
|
|
A couple of misc fixes/workarounds for some issues that are causing a
lot of pain for people.
Of most interest are the PCI power management and GR init WARs, which
effect a rather significant number of laptop systems that are in use
today.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5Ef5YKS9EPBH3YUubzvVr++_rzjgSqV_B5nC0L2kB6-Q@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
A bunch of fixes to avoid null pointer dereference in fbcon, fix a return
in xen, some DT bindings fixes, a vc4 issue with 1920x1200 mode validation,
and a conflicting framebuffer in vboxvideo.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200404090057.a3m7uw6tavwtcyon@gilmour.lan
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Only gvt fixes on this round:
- Fix non-privilege access warning (Tina)
- Fix display port type (Tina)
- BDW cmd parser missed SWTESS_BASE_ADDRESS (Yan)
- Bypass length check of LRI (Yan)
- Fix one klocwork warning (Tina)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402213026.GA1141017@intel.com
|
|
The use of `delay_usecs` in terminate_request() was replaced with the new
`delay` struct used by the SPI subsystem, however the unit was
set to SPI_DELAY_UNIT_NSECS instead of SPI_DELAY_UNIT_USECS. This fixes that.
Fixes: 7d3ca507fda9 ("platform/chrome: cros_ec_spi: Use new structure for SPI transfer delays")
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Merge more updates from Andrew Morton:
- a lot more of MM, quite a bit more yet to come: (memcg, pagemap,
vmalloc, pagealloc, migration, thp, ksm, madvise, virtio,
userfaultfd, memory-hotplug, shmem, rmap, zswap, zsmalloc, cleanups)
- various other subsystems (procfs, misc, MAINTAINERS, bitops, lib,
checkpatch, epoll, binfmt, kallsyms, reiserfs, kmod, gcov, kconfig,
ubsan, fault-injection, ipc)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (158 commits)
ipc/shm.c: make compat_ksys_shmctl() static
ipc/mqueue.c: fix a brace coding style issue
lib/Kconfig.debug: fix a typo "capabilitiy" -> "capability"
ubsan: include bug type in report header
kasan: unset panic_on_warn before calling panic()
ubsan: check panic_on_warn
drivers/misc/lkdtm/bugs.c: add arithmetic overflow and array bounds checks
ubsan: split "bounds" checker from other options
ubsan: add trap instrumentation option
init/Kconfig: clean up ANON_INODES and old IO schedulers options
kernel/gcov/fs.c: replace zero-length array with flexible-array member
gcov: gcc_3_4: replace zero-length array with flexible-array member
gcov: gcc_4_7: replace zero-length array with flexible-array member
kernel/kmod.c: fix a typo "assuems" -> "assumes"
reiserfs: clean up several indentation issues
kallsyms: unexport kallsyms_lookup_name() and kallsyms_on_each_symbol()
samples/hw_breakpoint: drop use of kallsyms_lookup_name()
samples/hw_breakpoint: drop HW_BREAKPOINT_R when reporting writes
fs/binfmt_elf.c: don't free interpreter's ELF pheaders on common path
fs/binfmt_elf.c: allocate less for static executable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
- Fix for memory leaks around UBIFS orphan handling
- Fix for memory leaks around UBI fastmap
- Remove zero-length array from ubi-media.h
- Fix for TNC lookup in UBIFS orphan code
* tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: ubi-media.h: Replace zero-length array with flexible-array member
ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len
ubi: fastmap: Only produce the initial anchor PEB when fastmap is used
ubi: fastmap: Free unused fastmap anchor peb during detach
ubifs: ubifs_add_orphan: Fix a memory leak bug
ubifs: ubifs_jnl_write_inode: Fix a memory leak bug
ubifs: Fix ubifs_tnc_lookup() usage in do_kill_orphans()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Some cleanups in arch_rw locking functions, improved interrupt
handling in arch spinlocks, coversions to request_irq() and syscall
table generation cleanups"
* 'parisc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: remove nargs from __SYSCALL
parisc: Refactor alternative code to accept multiple conditions
parisc: Rework arch_rw locking functions
parisc: Improve interrupt handling in arch_spin_lock_flags()
parisc: Replace setup_irq() by request_irq()
|
|
Pull IDE update from David Miller:
"As usual, very quiet in this subsystem.
Just a list_for_each_entry_safe() conversion"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
drivers/ide: Fix build regression.
drivers/ide: convert to list_for_each_entry_safe()
|
|
Pull networking fixes from David Miller:
1) Slave bond and team devices should not be assigned ipv6 link local
addresses, from Jarod Wilson.
2) Fix clock sink config on some at803x PHY devices, from Oleksij
Rempel.
3) Uninitialized stack space transmitted in slcan frames, fix from
Richard Palethorpe.
4) Guard HW VLAN ops properly in stmmac driver, from Jose Abreu.
5) "=" --> "|=" fix in aquantia driver, from Colin Ian King.
6) Fix TCP fallback in mptcp, from Florian Westphal. (accessing a plain
tcp_sk as if it were an mptcp socket).
7) Fix cavium driver in some configurations wrt. PTP, from Yue Haibing.
8) Make ipv6 and ipv4 consistent in the lower bound allowed for
neighbour entry retrans_time, from Hangbin Liu.
9) Don't use private workqueue in pegasus usb driver, from Petko
Manolov.
10) Fix integer overflow in mlxsw, from Colin Ian King.
11) Missing refcnt init in cls_tcindex, from Cong Wang.
12) One too many loop iterations when processing cmpri entries in ipv6
rpl code, from Alexander Aring.
13) Disable SG and TSO by default in r8169, from Heiner Kallweit.
14) NULL deref in macsec, from Davide Caratti.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
macsec: fix NULL dereference in macsec_upd_offload()
skbuff.h: Improve the checksum related comments
net: dsa: bcm_sf2: Ensure correct sub-node is parsed
qed: remove redundant assignment to variable 'rc'
wimax: remove some redundant assignments to variable result
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE
mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_PRIORITY
r8169: change back SG and TSO to be disabled by default
net: dsa: bcm_sf2: Do not register slave MDIO bus with OF
ipv6: rpl: fix loop iteration
tun: Don't put_page() for all negative return values from XDP program
net: dsa: mt7530: fix null pointer dereferencing in port5 setup
mptcp: add some missing pr_fmt defines
net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers
net_sched: fix a missing refcnt in tcindex_init()
net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting
mlxsw: spectrum_trap: fix unintention integer overflow on left shift
pegasus: Remove pegasus' own workqueue
neigh: support smaller retrans_time settting
net: openvswitch: use hlist_for_each_entry_rcu instead of hlist_for_each_entry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia updates from Dominik Brodowski:
"A few PCMCIA odd fixes: removing a few spaces and useless casts,
replacing snprintf() with scnprintf(), and replacing zero-length
arrays with a flexible-array member"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: remove some unused space characters
pcmcia: soc_common.h: Replace zero-length array with flexible-array member
pcmcia: cs_internal.h: Replace zero-length array with flexible-array member
pcmcia: Use scnprintf() for avoiding potential buffer overflow
pcmcia: omap: remove useless cast for driver.name
|
|
Adds LKDTM tests for arithmetic overflow (both signed and unsigned), as
well as array bounds checking.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Link: http://lkml.kernel.org/r/20200227193516.32566-4-keescook@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For now, distributions implement advanced udev rules to essentially
- Don't online any hotplugged memory (s390x)
- Online all memory to ZONE_NORMAL (e.g., most virt environments like
hyperv)
- Online all memory to ZONE_MOVABLE in case the zone imbalance is taken
care of (e.g., bare metal, special virt environments)
In summary: All memory is usually onlined the same way, however, the
kernel always has to ask user space to come up with the same answer.
E.g., Hyper-V always waits for a memory block to get onlined before
continuing, otherwise it might end up adding memory faster than
onlining it, which can result in strange OOM situations. This waiting
slows down adding of a bigger amount of memory.
Let's allow to specify a default online_type, not just "online" and
"offline". This allows distributions to configure the default online_type
when booting up and be done with it.
We can now specify "offline", "online", "online_movable" and
"online_kernel" via
- "memhp_default_state=" on the kernel cmdline
- /sys/devices/system/memory/auto_online_blocks
just like we are able to specify for a single memory block via
/sys/devices/system/memory/memoryX/state
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Yumei Huang <yuhuang@redhat.com>
Link: http://lkml.kernel.org/r/20200317104942.11178-9-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
... and rename it to memhp_default_online_type. This is a preparation
for more detailed default online behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Yumei Huang <yuhuang@redhat.com>
Link: http://lkml.kernel.org/r/20200317104942.11178-8-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We get the MEM_ONLINE notifier call if memory is added right from the
kernel via add_memory() or later from user space.
Let's get rid of the "ha_waiting" flag - the wait event has an inbuilt
mechanism (->done) for that. Initialize the wait event only once and
reinitialize before adding memory. Unconditionally call complete() and
wait_for_completion_timeout().
If there are no waiters, complete() will only increment ->done - which
will be reset by reinit_completion(). If complete() has already been
called, wait_for_completion_timeout() will not wait.
There is still the chance for a small race between concurrent
reinit_completion() and complete(). If complete() wins, we would not wait
- which is tolerable (and the race exists in current code as well).
Note: We only wait for "some" memory to get onlined, which seems to be
good enough for now.
[akpm@linux-foundation.org: register_memory_notifier() after init_completion(), per David]
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yumei Huang <yuhuang@redhat.com>
Link: http://lkml.kernel.org/r/20200317104942.11178-6-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's use a simple array which we can reuse soon. While at it, move the
string->mmop conversion out of the device hotplug lock.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Yumei Huang <yuhuang@redhat.com>
Link: http://lkml.kernel.org/r/20200317104942.11178-4-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Historically, we used the value -1. Just treat 0 as the special case now.
Clarify a comment (which was wrong, when we come via device_online() the
first time, the online_type would have been 0 / MEM_ONLINE). The default
is now always MMOP_OFFLINE. This removes the last user of the manual
"-1", which didn't use the enum value.
This is a preparation to use the online_type as an array index.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Yumei Huang <yuhuang@redhat.com>
Link: http://lkml.kernel.org/r/20200317104942.11178-3-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/memory_hotplug: allow to specify a default online_type", v3.
Distributions nowadays use udev rules ([1] [2]) to specify if and how to
online hotplugged memory. The rules seem to get more complex with many
special cases. Due to the various special cases,
CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE cannot be used. All memory hotplug
is handled via udev rules.
Every time we hotplug memory, the udev rule will come to the same
conclusion. Especially Hyper-V (but also soon virtio-mem) add a lot of
memory in separate memory blocks and wait for memory to get onlined by
user space before continuing to add more memory blocks (to not add memory
faster than it is getting onlined). This of course slows down the whole
memory hotplug process.
To make the job of distributions easier and to avoid udev rules that get
more and more complicated, let's extend the mechanism provided by
- /sys/devices/system/memory/auto_online_blocks
- "memhp_default_state=" on the kernel cmdline
to be able to specify also "online_movable" as well as "online_kernel"
=== Example /usr/libexec/config-memhotplug ===
#!/bin/bash
VIRT=`systemd-detect-virt --vm`
ARCH=`uname -p`
sense_virtio_mem() {
if [ -d "/sys/bus/virtio/drivers/virtio_mem/" ]; then
DEVICES=`find /sys/bus/virtio/drivers/virtio_mem/ -maxdepth 1 -type l | wc -l`
if [ $DEVICES != "0" ]; then
return 0
fi
fi
return 1
}
if [ ! -e "/sys/devices/system/memory/auto_online_blocks" ]; then
echo "Memory hotplug configuration support missing in the kernel"
exit 1
fi
if grep "memhp_default_state=" /proc/cmdline > /dev/null; then
echo "Memory hotplug configuration overridden in kernel cmdline (memhp_default_state=)"
exit 1
fi
if [ $VIRT == "microsoft" ]; then
echo "Detected Hyper-V on $ARCH"
# Hyper-V wants all memory in ZONE_NORMAL
ONLINE_TYPE="online_kernel"
elif sense_virtio_mem; then
echo "Detected virtio-mem on $ARCH"
# virtio-mem wants all memory in ZONE_NORMAL
ONLINE_TYPE="online_kernel"
elif [ $ARCH == "s390x" ] || [ $ARCH == "s390" ]; then
echo "Detected $ARCH"
# standby memory should not be onlined automatically
ONLINE_TYPE="offline"
elif [ $ARCH == "ppc64" ] || [ $ARCH == "ppc64le" ]; then
echo "Detected" $ARCH
# PPC64 onlines all hotplugged memory right from the kernel
ONLINE_TYPE="offline"
elif [ $VIRT == "none" ]; then
echo "Detected bare-metal on $ARCH"
# Bare metal users expect hotplugged memory to be unpluggable. We assume
# that ZONE imbalances on such enterpise servers cannot happen and is
# properly documented
ONLINE_TYPE="online_movable"
else
# TODO: Hypervisors that want to unplug DIMMs and can guarantee that ZONE
# imbalances won't happen
echo "Detected $VIRT on $ARCH"
# Usually, ballooning is used in virtual environments, so memory should go to
# ZONE_NORMAL. However, sometimes "movable_node" is relevant.
ONLINE_TYPE="online"
fi
echo "Selected online_type:" $ONLINE_TYPE
# Configure what to do with memory that will be hotplugged in the future
echo $ONLINE_TYPE 2>/dev/null > /sys/devices/system/memory/auto_online_blocks
if [ $? != "0" ]; then
echo "Memory hotplug cannot be configured (e.g., old kernel or missing permissions)"
# A backup udev rule should handle old kernels if necessary
exit 1
fi
# Process all already pluggedd blocks (e.g., DIMMs, but also Hyper-V or virtio-mem)
if [ $ONLINE_TYPE != "offline" ]; then
for MEMORY in /sys/devices/system/memory/memory*; do
STATE=`cat $MEMORY/state`
if [ $STATE == "offline" ]; then
echo $ONLINE_TYPE > $MEMORY/state
fi
done
fi
=== Example /usr/lib/systemd/system/config-memhotplug.service ===
[Unit]
Description=Configure memory hotplug behavior
DefaultDependencies=no
Conflicts=shutdown.target
Before=sysinit.target shutdown.target
After=systemd-modules-load.service
ConditionPathExists=|/sys/devices/system/memory/auto_online_blocks
[Service]
ExecStart=/usr/libexec/config-memhotplug
Type=oneshot
TimeoutSec=0
RemainAfterExit=yes
[Install]
WantedBy=sysinit.target
=== Example modification to the 40-redhat.rules [2] ===
: diff --git a/40-redhat.rules b/40-redhat.rules-new
: index 2c690e5..168fd03 100644
: --- a/40-redhat.rules
: +++ b/40-redhat.rules-new
: @@ -6,6 +6,9 @@ SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}
: # Memory hotadd request
: SUBSYSTEM!="memory", GOTO="memory_hotplug_end"
: ACTION!="add", GOTO="memory_hotplug_end"
: +# memory hotplug behavior configured
: +PROGRAM=="grep online /sys/devices/system/memory/auto_online_blocks", GOTO="memory_hotplug_end"
: +
: PROGRAM="/bin/uname -p", RESULT=="s390*", GOTO="memory_hotplug_end"
:
: ENV{.state}="online"
===
[1] https://github.com/lnykryn/systemd-rhel/pull/281
[2] https://github.com/lnykryn/systemd-rhel/blob/staging/rules/40-redhat.rules
This patch (of 8):
The name is misleading and it's not really clear what is "kept". Let's
just name it like the online_type name we expose to user space ("online").
Add some documentation to the types.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Yumei Huang <yuhuang@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Link: http://lkml.kernel.org/r/20200319131221.14044-1-david@redhat.com
Link: http://lkml.kernel.org/r/20200317104942.11178-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pages_correctly_probed() is a leftover from ancient times. It dates back
to commit 3947be1969a9 ("[PATCH] memory hotplug: sysfs and add/remove
functions"), where Pg_reserved checks were added as a sfety net:
/*
* The probe routines leave the pages reserved, just
* as the bootmem code does. Make sure they're still
* that way.
*/
The checks were refactored quite a bit over the years, especially in
commit b77eab7079d9 ("mm/memory_hotplug: optimize probe routine"), where
checks for present, valid, and online sections were added.
Hotplugged memory is added via add_memory(), which will create the full
memmap for the hotplugged memory, and mark all sections valid and present.
Only full memory blocks are onlined/offlined, so we also cannot have an
inconsistency in that regard (especially, memory blocks with some sections
being online and some being offline).
1. Boot memory always starts online. Since commit c5e79ef561b0
("mm/memory_hotplug.c: don't allow to online/offline memory blocks with
holes") we disallow to offline any memory with holes. Therefore, we
never online memory with holes. Present and validity checks are
superfluous.
2. Only complete memory blocks are onlined/offlined (and especially,
the state - online or offline - is stored for whole memory blocks).
Besides the core, only arch/powerpc/platforms/powernv/memtrace.c
manually calls offline_pages() and fiddels with memory block states.
But it also only offlines complete memory blocks.
3. To make any of these conditions trigger, something would have to be
terribly messed up in the core. (e.g., online/offline only some
sections of a memory block).
4. Memory unplug properly makes sure that all sysfs attributes were
removed (and therefore, that all threads left the sysfs handlers). We
don't have to worry about zombie devices at this point.
5. The valid_section_nr(section_nr) check is actually dead code, as it
would never have been reached due to the WARN_ON_ONCE(!pfn_valid(pfn)).
No wonder we haven't seen any of these errors in a long time (or even
ever, according to my search). Let's just get rid of them. Now, all
checks that could hinder onlining and offlining are completely
contained in online_pages()/offline_pages().
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: http://lkml.kernel.org/r/20200127110424.5757-3-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: drop superfluous section checks when onlining/offlining".
Let's drop some superfluous section checks on the onlining/offlining path.
This patch (of 3):
Since commit c5e79ef561b0 ("mm/memory_hotplug.c: don't allow to
online/offline memory blocks with holes") we have a generic check in
offline_pages() that disallows offlining memory blocks with holes.
Memory blocks with missing sections are just another variant of these type
of blocks. We can stop checking (and especially storing) present
sections. A proper error message is now printed why offlining failed.
section_count was initially introduced in commit 07681215975e ("Driver
core: Add section count to memory_block struct") in order to detect when
it is okay to remove a memory block. It was used in commit 26bbe7ef6d5c
("drivers/base/memory.c: prohibit offlining of memory blocks with missing
sections") to disallow offlining memory blocks with missing sections. As
we refactored creation/removal of memory devices and have a proper check
for holes in place, we can drop the section_count.
This also removes a leftover comment regarding the mem_sysfs_mutex, which
was removed in commit 848e19ad3c33 ("drivers/base/memory.c: drop the
mem_sysfs_mutex").
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: http://lkml.kernel.org/r/20200127110424.5757-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
changed the behavior when deflation happens automatically. Instead of
deflating when called by the OOM handler, the shrinker is used.
However, the balloon is not simply some other slab cache that should be
shrunk when under memory pressure. The shrinker does not have a concept
of priorities yet, so this behavior cannot be configured. Eventually once
that is in place, we might want to switch back after doing proper testing.
There was a report that this results in undesired side effects when
inflating the balloon to shrink the page cache. [1]
"When inflating the balloon against page cache (i.e. no free memory
remains) vmscan.c will both shrink page cache, but also invoke the
shrinkers -- including the balloon's shrinker. So the balloon
driver allocates memory which requires reclaim, vmscan gets this
memory by shrinking the balloon, and then the driver adds the
memory back to the balloon. Basically a busy no-op."
The name "deflate on OOM" makes it pretty clear when deflation should
happen - after other approaches to reclaim memory failed, not while
reclaiming. This allows to minimize the footprint of a guest - memory
will only be taken out of the balloon when really needed.
Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because
this has no such side effects. Always register the shrinker with
VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free
pages that are still to be processed by the guest. The hypervisor takes
care of identifying and resolving possible races between processing a
hinting request and the guest reusing a page.
In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom
notifier with shrinker"), don't add a module parameter to configure the
number of pages to deflate on OOM. Can be re-added if really needed.
Also, pay attention that leak_balloon() returns the number of 4k pages -
convert it properly in virtio_balloon_oom_notify().
Testing done by Tyler for future reference:
Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42
GB file full of random bytes that we continually cat to /dev/null.
This fills the page cache as the file is read. Meanwhile, we trigger
the balloon to inflate, with a target size of 53 GB. This setup causes
the balloon inflation to pressure the page cache as the page cache is
also trying to grow. Afterwards we shrink the balloon back to zero (so
total deflate == total inflate).
Without this patch (kernel 4.19.0-5):
Inflation never reaches the target until we stop the "cat file >
/dev/null" process. Total inflation time was 542 seconds. The longest
period that made no net forward progress was 315 seconds.
Result of "grep balloon /proc/vmstat" after the test:
balloon_inflate 154828377
balloon_deflate 154828377
With this patch (kernel 5.6.0-rc4+):
Total inflation duration was 63 seconds. No deflate-queue activity
occurs when pressuring the page-cache.
Result of "grep balloon /proc/vmstat" after the test:
balloon_inflate 12968539
balloon_deflate 12968539
Conclusion: This patch fixes the issue. In the test it reduced
inflate/deflate activity by 12x, and reduced inflation time by 8.6x.
But more importantly, if we hadn't killed the "cat file > /dev/null"
process then, without the patch, the inflation process would never reach
the target.
[1] https://www.spinics.net/lists/linux-virtualization/msg40863.html
Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com
Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Tyler Sanderson <tysand@google.com>
Tested-by: Tyler Sanderson <tysand@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add support for the page reporting feature provided by virtio-balloon.
Reporting differs from the regular balloon functionality in that is is
much less durable than a standard memory balloon. Instead of creating a
list of pages that cannot be accessed the pages are only inaccessible
while they are being indicated to the virtio interface. Once the
interface has acknowledged them they are placed back into their respective
free lists and are once again accessible by the guest system.
Unlike a standard balloon we don't inflate and deflate the pages. Instead
we perform the reporting, and once the reporting is completed it is
assumed that the page has been dropped from the guest and will be faulted
back in the next time the page is accessed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Cc: wei qi <weiqi4@huawei.com>
Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the page poisoning setting wasn't being enabled unless free page
hinting was enabled. However we will need the page poisoning tracking
logic as well for free page reporting. As such pull it out and make it a
separate bit of config in the probe function.
In addition we need to add support for the more recent init_on_free
feature which expects a behavior similar to page poisoning in that we
expect the page to be pre-zeroed.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nitesh Narayan Lal <nitesh@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Yang Zhang <yang.zhang.wz@gmail.com>
Cc: wei qi <weiqi4@huawei.com>
Link: http://lkml.kernel.org/r/20200211224646.29318.695.stgit@localhost.localdomain
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
This reverts commit 5a6b4cc5b7a1892a8d7f63d6cbac6e0ae2a9d031.
It has been queued properly in the akpm tree, this version is just
creating conflicts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Certain boards with GP107/GP108 chipsets hang (often, but randomly) for
unknown reasons during GR initialisation.
The first tell-tale symptom of this issue is:
nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 409800 [ TIMEOUT ]
appearing in dmesg, likely followed by many other failures being logged.
Karol found this WAR for the issue a while back, but efforts to isolate
the root cause and proper fix have not yielded success so far. I've
modified the original patch to include a few more details, limit it to
GP107/GP108 by default, and added a config option to override this choice.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
|
|
certain intel bridges
Fixes the infamous 'runtime PM' bug many users are facing on Laptops with
Nvidia Pascal GPUs by skipping said PCI power state changes on the GPU.
Depending on the used kernel there might be messages like those in demsg:
"nouveau 0000:01:00.0: Refused to change power state, currently in D3"
"nouveau 0000:01:00.0: can't change power state from D3cold to D0 (config
space inaccessible)"
followed by backtraces of kernel crashes or timeouts within nouveau.
It's still unkown why this issue exists, but this is a reliable workaround
and solves a very annoying issue for user having to choose between a
crashing kernel or higher power consumption of their Laptops.
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Mika Westerberg <mika.westerberg@intel.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205623
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When nouveau processes GPU faults, it checks to see if the fault address
falls within the "unmanaged" range which is reserved for fixed allocations
instead of addresses chosen by the core mm code. If start is greater than
or equal to svmm->unmanaged.limit, then limit will also be greater than
svmm->unmanaged.limit which is greater than svmm->unmanaged.start and the
start = max_t(u64, start, svmm->unmanaged.limit) will change nothing.
Just remove the useless lines of code.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
When migrating system memory to GPU memory, check that SVM has been
enabled. Even though most errors can be ignored since migration is
a performance optimization, return an error because this is a violation
of the API.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
find_vma_intersection(mm, start, end) only guarantees that end is greater
than or equal to vma->vm_start but doesn't guarantee that start is
greater than or equal to vma->vm_start. The calculation for the
intersecting range in nouveau_svmm_bind() isn't accounting for this and
can call migrate_vma_setup() with a starting address less than
vma->vm_start. This results in migrate_vma_setup() returning -EINVAL for
the range instead of nouveau skipping that part of the range and migrating
the rest.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
As there is no need to check for the return value of debugfs_create_file
and drm_debugfs_create_files, remove unnecessary checks and error
handling in nouveau_drm_debugfs_init.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
