summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-01-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-04r8169: more 8168dp support.françois romieu
Adapted from version 8.019.00 of Realtek's r8168 driver Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: rtl_csi_access_enable rename.françois romieu
Newer 8168 needs a slightly different rtl_csi_access_enable. This patch separates some noise from the real thing. No functional change. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: magic.françois romieu
Adapted from version 8.019.00 of Realtek's r8168 driver. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: phy power opsfrançois romieu
Bits from : - version 8.019.00 of Realtek's 8168 driver - version 1.019.00 of Realtek's 8101 driver Plain old 8169 (PCI) devices do not seem to need anything akin to it. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: 8168DP specific MII registers access methods.françois romieu
Adapted from version 8.019.00 of Realtek's r8168 driver and amended per Hayes Wang's correction : - OCPDR_GPHY_REG_SHIFT must be 16, not 12 - the reg should be at bit 16 ~ 22, whence OCPDR_REG_MASK Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: use device dependent methods to access the MII registers.françois romieu
Current mdio_{read/write} needs device specific information to work correctly with newer chipsets. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: identify different registers.françois romieu
Documentation (sort of). The location are the same, the values are the same but it is just accidental. Note that the 810x could cope with a smaller value as it does not support jumbo frames. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-04r8169: remove the firmware of RTL8111D.françois romieu
The binary file of the firmware is moved to linux-firmware repository. The firmwares are rtl_nic/rtl8168d-1.fw and rtl_nic/rtl8168d-2.fw. The driver goes along if the firmware couldn't be found. However, it is suggested to be done with the suitable firmware. Some wrong PHY parameters are directly corrected in the driver. Simple firmware checking added per Ben Hutchings suggestion. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ben Hutchings <benh@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03cnic: Do not call bnx2i when bnx2i is calling cnic_unregister_driver()Michael Chan
We should call bnx2i to send the iSCSI netlink message earlier in cnic_unregister_device(). By the time cnic_unregister_driver() is called, bnx2i may have freed data structures used by the upcalls. Update version to 2.2.12. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03cnic: Do not allow iSCSI and FCoE on bnx2x multi-function modeMichael Chan
Because the hardware does not yet support these in this mode. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03depca: Fix section mismatch derived from depca_isa_probe()Sedat Dilek
This fixes the following warning: WARNING: drivers/net/depca.o(.data+0x0): Section mismatch in reference from the variable depca_isa_driver to the function .init.text:depca_isa_probe() The variable depca_isa_driver references the function __init depca_isa_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Tested with linux-next (next-20101231) Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03smsc-ircc2: Fix section mismatch derived from smsc_ircc_pnp_probe()Sedat Dilek
This fixes the following warning: drivers/net/irda/smsc-ircc2.o(.data+0x18): Section mismatch in reference from the variable smsc_ircc_pnp_driver to the function .init.text:smsc_ircc_pnp_probe() The variable smsc_ircc_pnp_driver references the function __init smsc_ircc_pnp_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Tested with linux-next (next-20101231) Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03ksz884x: Fix section mismatch derived from pcidev_init()Sedat Dilek
This fixes the following warning: WARNING: drivers/net/ksz884x.o(.data+0x18): Section mismatch in reference from the variable pci_device_driver to the function .init.text:pcidev_init() The variable pci_device_driver references the function __init pcidev_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Tested with linux-next (next-20101231) Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03ifb: add performance flagsEric Dumazet
Le lundi 03 janvier 2011 à 11:40 -0800, David Miller a écrit : > From: Jarek Poplawski <jarkao2@gmail.com> > Date: Mon, 3 Jan 2011 20:37:03 +0100 > > > On Sun, Jan 02, 2011 at 09:24:36PM +0100, Eric Dumazet wrote: > >> Le mercredi 29 décembre 2010 ?? 00:07 +0100, Jarek Poplawski a écrit : > >> > >> > Ingress is before vlans handler so these features and the > >> > NETIF_F_HW_VLAN_TX flag seem useful for ifb considering > >> > dev_hard_start_xmit() checks. > >> > >> OK, here is v2 of the patch then, thanks everybody. > >> > >> > >> [PATCH v2 net-next-2.6] ifb: add performance flags > >> > >> IFB can use the full set of features flags (NETIF_F_SG | > >> NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) to > >> avoid unnecessary split of some packets (GRO for example) > >> > >> Changli suggested to also set vlan_features, > > > > He also suggested more GSO flags of which especially NETIF_F_TSO6 > > seems interesting (wrt GRO)? > > I think at least TSO6 would very much be appropriate here. Yes, why not, I am only wondering why loopback / dummy (and others ?) only set NETIF_F_TSO :) Since I want to play with ECN, I might also add NETIF_F_TSO_ECN ;) For other flags, I really doubt it can matter on ifb ? [PATCH v3 net-next-2.6] ifb: add performance flags IFB can use the full set of features flags (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) to avoid unnecessary split of some packets (GRO for example) Changli suggested to also set vlan_features, NETIF_F_TSO6, NETIF_F_TSO_ECN. Jarek suggested to add NETIF_F_HW_VLAN_TX as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Changli Gao <xiaosuo@gmail.com> Cc: Jarek Poplawski <jarkao2@gmail.com> Cc: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03ll_temac: Fix section mismatch from the temac_of_probeMichal Simek
Replace __init by __devinit. Warning message: WARNING: vmlinux.o(.data+0xbc14): Section mismatch in reference from the variable temac_of_driver to the function .init.text:temac_of_probe() The variable temac_of_driver references the function __init temac_of_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03netxen: update driver version 4.0.75amit salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03netxen: enable LRO based on NETIF_F_LROSucheta Chakraborty
o Enable/disable LRO in device based on NETIF_F_LRO flag, instead of using driver private flag. o Disable LRO, if rx csum offloading is off. David Miller, You should use netdev_info() instead of dev_info(). Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03net/Space: delete orphaned externs from deleted driversPaul Gortmaker
The drivers associated with the prototypes in this commit have been deleted some time ago, but the externs escaped detection. Using a simple "git grep" shows that these references are historical artefacts, only mentioned by the deleted lines. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03atl1: fix oops when changing tx/rx ring paramsJ. K. Cliburn
Commit 3f5a2a713aad28480d86b0add00c68484b54febc zeroes out the statistics message block (SMB) and coalescing message block (CMB) when adapter ring resources are freed. This is desirable behavior, but, as a side effect, the commit leads to an oops when atl1_set_ringparam() attempts to alter the number of rx or tx elements in the ring buffer (by using ethtool -G, for example). We don't want SMB or CMB to change during this operation. Modify atl1_set_ringparam() to preserve SMB and CMB when changing ring parameters. Cc: stable@kernel.org Signed-off-by: Jay Cliburn <jcliburn@gmail.com> Reported-by: Tõnu Raitviir <jussuf@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01sky2: implement 64 bit statsstephen hemminger
This implements 64 bit statistics support and fixes races when reading counter values. The PHY counters can only be accessed 16 bits at a time, so they are subject to carry races. NB: * TX/RX counters are maintained in software because the the hardware packet count is only a 32 bit value. * Error counters are really only 32 bit. * Old 32 bit counter fields in dev->stats still used for some software counters Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-01tg3: fix warningsEric Dumazet
In case CONFIG_PM_SLEEP is disabled, we dont need tg3_suspend() and tg3_resume(). drivers/net/tg3.c:15056: warning: ‘tg3_suspend’ defined but not used drivers/net/tg3.c:15110: warning: ‘tg3_resume’ defined but not used Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Michael Chan <mchan@broadcom.com> Cc: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31drivers/atm/atmtcp.c: add missing atm_dev_putJulia Lawall
The earlier call to atm_dev_lookup increases the reference count of dev, so decrease it on the way out. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x, E; constant C; @@ x = atm_dev_lookup(...); ... when != false x != NULL when != true x == NULL when != \(E = x\|x = E\) when != atm_dev_put(dev); *return -C; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31skge: Do not use legacy PCI power managementstephen hemminger
The skge driver used the legacy PCI power management, and did its own PCI callbacks. Use the same code model as Rafael's changes to sky2. Let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Compile tested only (so far). Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31starfire: Fix dma_addr_t size test for MIPSBen Hutchings
Commit 56543af "starfire: use BUILD_BUG_ON for netdrv_addr_t" revealed that the preprocessor condition used to find the size of dma_addr_t yielded the wrong result for some architectures and configurations. This was kluged for 64-bit PowerPC in commit 3e502e6 by adding yet another case to the condition. However, 64-bit MIPS configurations are not detected reliably either. This should be fixed by using CONFIG_ARCH_DMA_ADDR_T_64BIT, but that isn't yet defined everywhere it should be. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31tg3: fix return value check in tg3_read_vpd()David Sterba
Besides -ETIMEDOUT and -EINTR, pci_read_vpd may return other error values like -ENODEV or -EINVAL which are ignored due to the buggy check, but the data are not read from VPD anyway and this is checked subsequently with at most 3 needless loop iterations. This does not show up as a runtime bug. CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31Broadcom CNIC core network driver: fix mem leak on allocation failures in ↵Jesper Juhl
cnic_alloc_uio_rings() We are leaking memory in drivers/net/cnic.c::cnic_alloc_uio_rings() if either of the calls to dma_alloc_coherent() fail. This patch fixes it by freeing both the memory allocated with kzalloc() and memory allocated with previous calls to dma_alloc_coherent() when there's a failure. Thanks to Joe Perches <joe@perches.com> for suggesting a better implementation than my initial version. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31ISDN, Gigaset: Fix memory leak in do_disconnect_req()Jesper Juhl
Hi, In drivers/isdn/gigaset/capi.c::do_disconnect_req() we will leak the memory allocated (with kmalloc) to 'b3cmsg' if the call to alloc_skb() fails. ... b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL); allocation here ------^ if (!b3cmsg) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); return; } capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND, ap->nextMessageNumber++, cmsg->adr.adrPLCI | (1 << 16)); b3cmsg->Reason_B3 = CapiProtocolErrorLayer1; b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL); if (b3skb == NULL) { dev_err(cs->dev, "%s: out of memory\n", __func__); send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR); return; leak here ------^ ... This leak is easily fixed by just kfree()'ing the memory allocated to 'b3cmsg' right before we return. The following patch does that. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31sky2: Do not use legacy PCI power managementRafael J. Wysocki
The sky2 driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI sybsystem-level power management code. Moreover, it uses device_set_wakeup_enable() incorrectly (that function should be used when the WoL setting is changed rather than during suspend). Convert sky2 to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested on a desktop machine with a Marvell 88E8056 PCI-E adapter. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31tg3: Do not use legacy PCI power managementRafael J. Wysocki
The tg3 driver uses the legacy PCI power management, so it has to do some PCI-specific things in its ->suspend() and ->resume() callbacks, which isn't necessary and should better be done by the PCI sybsystem-level power management code. Convert tg3 to the new PCI power management framework and make it let the PCI subsystem take care of all the PCI-specific aspects of device handling during system power transitions. Tested on HP nx6325 with a NetXtreme BCM5788 adapter. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31USB: cdc_ether: remove unneeded checkDan Carpenter
We already verified that "dev->udev->actconfig->extralen" was non-zero so "len" is non-zero here as well. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31bnx2: Update firmware and versionMichael Chan
Update MIPS firmware to 6.2.1, with improved small packet performance in RSS mode, and iSCSI CID allocation bug fix on 5708. Update driver version to 2.0.21. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31bnx2: Free IRQ before freeing status block memoryMichael Chan
When changing ring size, we free all memory including status block memory. If we're in INTA mode and sharing IRQ, the IRQ handler can be called and it will reference the NULL status block pointer. Because of the lockless design of the IRQ handler, there is no simple way to synchronize and prevent this. So we avoid this problem by freeing the IRQ handler before freeing the status block memory. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31netxen: update module descriptionAmit Kumar Salecha
This driver supports only Intelligent Ethernet Adapters. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31bnx2x: adding dcbnl supportShmulik Ravid
Adding dcbnl implementation to bnx2x allowing users to manage the embedded DCBX engine. This patch is dependent on the following patches: [net-next-2.6 PATCH 1/3] dcbnl: add support for ieee8021Qaz attributes [net-next-2.6 PATCH 2/3] dcbnl: add appliction tlv handlers [net-next-2.6 PATCH 3/3] net_dcb: add application notifiers Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-28vxge: remove duplicated part of checkDan Carpenter
This is just a cleanup to make the static checkers happy. We don't need to check "own" twice. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Ram Vepa <ram.vepa@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-28skfp: testing the wrong variable in skfp_driver_init()Dan Carpenter
The intent here was to test if the allocation failed but we tested "SharedMemSize" instead of "SharedMemAddr" by mistake. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-28ppp: allow disabling multilink protocol ID compressionstephen hemminger
Linux would not connect to other router running old version Cisco IOS (12.0). This is most likely a bug in that version of IOS, since it is fixed in later versions. As a workaround this patch allows a module parameter to be set to disable compressing the protocol ID. See: https://bugzilla.vyatta.com/show_bug.cgi?id=3979 RFC 1990 allows an implementation to formulate MP fragments as if protocol compression had been negotiated. This allows us to always send compressed protocol IDs. But some implementations don't accept MP fragments with compressed protocol IDs. This parameter allows us to interoperate with them. The default value of the configurable parameter is the same as the current behavior: protocol compression is enabled. If protocol compression is disabled we will not send compressed protocol IDs. This is based on an earlier patch by Bob Gilligan (using a sysctl). Module parameter is writable to allow for enabling even if ppp is already loaded for other uses. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-28ehea: Avoid changing vlan flagsBreno Leitao
This patch avoids disabling the vlan flags using ethtool. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-28ueagle-atm: fix PHY signal initialization raceDan Williams
A race exists when initializing ueagle-atm devices where the generic atm device may not yet be created before the driver attempts to initialize it's PHY signal state, which checks whether the atm device has been created or not. This often causes the sysfs 'carrier' attribute to be '1' even though no signal has actually been found. uea_probe usbatm_usb_probe driver->bind (uea_bind) uea_boot kthread_run(uea_kthread) uea_kthread usbatm_atm_init uea_start_reset atm_dev_register UPDATE_ATM_SIGNAL UPDATE_ATM_SIGNAL checks whether the ATM device has been created and if not, will not update the PHY signal state. Because of the race that does not always happen in time, and the PHY signal state remains ATM_PHY_SIG_FOUND even though no signal exists. To fix the race, just create the kthread during initialization, and only after initialization is complete, start the thread that reboots the device and initializes PHY state. [ 3030.490931] uea_probe: calling usbatm_usb_probe [ 3030.490946] ueagle-atm 8-2:1.0: usbatm_usb_probe: trying driver ueagle-atm with vendor=1110, product=9031, ifnum 0 [ 3030.493691] uea_bind: setting usbatm [ 3030.496932] usb 8-2: [ueagle-atm] using iso mode [ 3030.497283] ueagle-atm 8-2:1.0: usbatm_usb_probe: using 3021 byte buffer for rx channel 0xffff880125953508 <kthread already started before usbatm_usb_probe() has returned> [ 3030.497292] usb 8-2: [ueagle-atm] (re)booting started <UPDATE_ATM_SIGNAL checks whether ATM device has been created yet before setting PHY state> [ 3030.497298] uea_start_reset: atm dev (null) <and since it hasn't been created yet PHY state is not set> [ 3030.497306] ueagle-atm 8-2:1.0: usbatm_usb_probe: using 3392 byte buffer for tx channel 0xffff8801259535b8 [ 3030.497374] usbatm_usb_probe: about to init [ 3030.497379] usbatm_usb_probe: calling usbatm_atm_init <atm device finally gets created> [ 3030.497384] usbatm_atm_init: creating atm device! Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/fib_frontend.c
2010-12-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (42 commits) ipv4: dont create routes on down devices epic100: hamachi: yellowfin: Fix skb allocation size sundance: Fix oopses with corrupted skb_shared_info Revert "ipv4: Allow configuring subnets as local addresses" USB: mcs7830: return negative if auto negotiate fails irda: prevent integer underflow in IRLMP_ENUMDEVICES tcp: fix listening_get_next() atl1c: Do not use legacy PCI power management mac80211: fix mesh forwarding MAINTAINERS: email address change net: Fix range checks in tcf_valid_offset(). net_sched: sch_sfq: fix allot handling hostap: remove netif_stop_queue from init mac80211/rt2x00: add ieee80211_tx_status_ni() typhoon: memory corruption in typhoon_get_drvinfo() net: Add USB PID for new MOSCHIP USB ethernet controller MCS7832 variant net_sched: always clone skbs ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed. netlink: fix gcc -Wconversion compilation warning asix: add USB ID for Logitec LAN-GTJ U2A ...
2010-12-25epic100: hamachi: yellowfin: Fix skb allocation sizeJarek Poplawski
Joel Soete reported oopses during pppoe over sundance NIC, caused by a bug in skb allocation and dma mapping code, where skb_reserve() bytes weren't taken into account. As a followup to the patch: "sundance: Fix oopses with corrupted skb_shared_info" very similar code is fixed here for three other drivers. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Cc: Joel Soete <soete.joel@scarlet.be> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25sundance: Fix oopses with corrupted skb_shared_infoJarek Poplawski
Joel Soete reported oopses at the beginning of pppoe connections since v2.6.35. After debugging the bug was found in sundance skb allocation and dma mapping code, where skb_reserve() bytes aren't taken into account. This is an old bug, only uncovered by some change in 2.6.35. Initial debugging patch by: Eric Dumazet <eric.dumazet@gmail.com> Reported-by: Joel Soete <soete.joel@scarlet.be> Tested-by: Joel Soete <soete.joel@scarlet.be> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2010-12-25bna: Update the driver version to 2.3.2.3Rasesh Mody
Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25bna: IOC failure auto recovery fixRasesh Mody
Change Details: - Made IOC auto_recovery synchronized and not timer based. - Only one PCI function will attempt to recover and reinitialize the ASIC on a failure, that too after all the active PCI functions acknowledge the IOC failure. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25bna: Restore VLAN filter tableRasesh Mody
Change Details: - Retrieve the VLAN configuration from the networking stack and apply it to the base interface during ifconfig up Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25bna: Removed unused codeRasesh Mody
Change Details: - Remove unused APIs and code cleanup Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-25bna: IOC uninit check and misc cleanupRasesh Mody
Change Details: - Added a check in ioc firmware lock function to see if IOC is in BFI_IOC_UNINIT state or not. If it is not in UNINIT state and the last IOC boot was not done by OS driver, force IOC state to BFI_IOC_UNINIT - Unused macro and API cleanup Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-02-13 22:14:29 +0000