| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A set of small fixes:
- Repair the ktime_get_coarse() functions so they actually deliver
what they are supposed to: tick granular time stamps. The current
code missed to add the accumulated nanoseconds part of the
timekeeper so the resulting granularity was 1 second.
- Prevent the tracer from infinitely recursing into time getter
functions in the arm architectured timer by marking these functions
notrace
- Fix a trivial compiler warning caused by wrong qualifier ordering"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Repair ktime_get_coarse*() granularity
clocksource/drivers/arm_arch_timer: Don't trace count reader functions
clocksource/drivers/timer-ti-dm: Change to new style declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two small fixes for RAS:
- Use a proper search algorithm to find the correct element in the
CEC array. The replacement was a better choice than fixing the
crash causes by the original search function with horrible duct
tape.
- Move the timer based decay function into thread context so it can
actually acquire the mutex which protects the CEC array to prevent
corruption"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Convert the timer callback to a workqueue
RAS/CEC: Fix binary search function
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Andy Shevchenko:
- fix a couple of Mellanox driver enumeration issues
- fix ASUS laptop regression with backlight
- fix Dell computers that got a wrong mode (tablet versus laptop) after
resume
* tag 'platform-drivers-x86-v5.2-3' of git://git.infradead.org/linux-platform-drivers-x86:
platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flow
platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registration
platform/x86: intel-vbtn: Report switch events when event wakes device
platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from asus_nb_wmi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.2-rc5
Nothing major, just some small gadget fixes, usb-serial new device
ids, a few new quirks, and some small fixes for some regressions that
have been found after the big 5.2-rc1 merge.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: Make sure an alt mode exist before getting its partner
usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
usb: gadget: dwc2: fix zlp handling
usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
usb: dwc2: Fix DMA cache alignment issues
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
USB: usb-storage: Add new ID to ums-realtek
usb: typec: ucsi: ccg: fix memory leak in do_flash
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
USB: serial: pl2303: add Allied Telesis VT-Kit3
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
|
|
Pull drm fixes from Daniel Vetter:
"Nothing unsettling here, also not aware of anything serious still
pending.
The edid override regression fix took a bit longer since this seems to
be an area with an overabundance of bad options. But the fix we have
now seems like a good path forward.
Next week it should be back to Dave.
Summary:
- fix regression on amdgpu on SI
- fix edid override regression
- driver fixes: amdgpu, i915, mediatek, meson, panfrost
- fix writecombine for vmap in gem-shmem helper (used by panfrost)
- add more panel quirks"
* tag 'drm-fixes-2019-06-14' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amdgpu: return 0 by default in amdgpu_pm_load_smu_firmware
drm/amdgpu: Fix bounds checking in amdgpu_ras_is_supported()
drm: add fallback override/firmware EDID modes workaround
drm/edid: abstract override/firmware EDID retrieval
drm/i915/perf: fix whitelist on Gen10+
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
drm/i915: Fix per-pixel alpha with CCS
drm/i915/dmc: protect against reading random memory
drm/i915/dsi: Use a fuzzy check for burst mode clock check
drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after alloc
drm/panfrost: Require the simple_ondemand governor
drm/panfrost: make devfreq optional again
drm/gem_shmem: Use a writecombine mapping for ->vaddr
drm: panel-orientation-quirks: Add quirk for GPD MicroPC
drm: panel-orientation-quirks: Add quirk for GPD pocket2
drm/meson: fix G12A primary plane disabling
drm/meson: fix primary plane disabling
drm/meson: fix G12A HDMI PLL settings for 4K60 1000/1001 variations
drm/mediatek: call mtk_dsi_stop() after mtk_drm_crtc_atomic_disable()
drm/mediatek: clear num_pipes when unbind driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single bug fix for hpsa.
The user visible consequences aren't clear, but the ioaccel2 raid
acceleration may misfire on the malformed request assuming the payload
is big enough to require chaining (more than 31 sg entries)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hpsa: correct ioaccel2 chaining
|
|
Pull block fixes from Jens Axboe:
- Remove references to old schedulers for the scheduler switching and
blkio controller documentation (Andreas)
- Kill duplicate check for report zone for null_blk (Chaitanya)
- Two bcache fixes (Coly)
- Ensure that mq-deadline is selected if zoned block device is enabled,
as we need that to support them (Damien)
- Fix io_uring memory leak (Eric)
- ps3vram fallout from LBDAF removal (Geert)
- Redundant blk-mq debugfs debugfs_create return check cleanup (Greg)
- Extend NOPLM quirk for ST1000LM024 drives (Hans)
- Remove error path warning that can now trigger after the queue
removal/addition fixes (Ming)
* tag 'for-linus-20190614' of git://git.kernel.dk/linux-block:
block/ps3vram: Use %llu to format sector_t after LBDAF removal
libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
bcache: only set BCACHE_DEV_WB_RUNNING when cached device attached
bcache: fix stack corruption by PRECEDING_KEY()
blk-mq: remove WARN_ON(!q->elevator) from blk_mq_sched_free_requests
blkio-controller.txt: Remove references to CFQ
block/switching-sched.txt: Update to blk-mq schedulers
null_blk: remove duplicate check for report zone
blk-mq: no need to check return value of debugfs_create functions
io_uring: fix memory leak of UNIX domain socket inode
block: force select mq-deadline for zoned block devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has two simple but wanted driver fixes for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pca-platform: Fix GPIO lookup code
i2c: acorn: fix i2c warning
|
|
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/devm_memremap_pages: fix final page put race
PCI/P2PDMA: track pgmap references per resource, not globally
lib/genalloc: introduce chunk owners
PCI/P2PDMA: fix the gen_pool_add_virt() failure path
mm/devm_memremap_pages: introduce devm_memunmap_pages
drivers/base/devres: introduce devm_release_action()
mm/vmscan.c: fix trying to reclaim unevictable LRU page
coredump: fix race condition between collapse_huge_page() and core dumping
mm/mlock.c: change count_mm_mlocked_page_nr return type
mm: mmu_gather: remove __tlb_reset_range() for force flush
fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
mm/vmscan.c: fix recent_rotated history
mm/mlock.c: mlockall error for flag MCL_ONFAULT
scripts/decode_stacktrace.sh: prefix addr2line with $CROSS_COMPILE
mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
mm: memcontrol: don't batch updates of local VM stats and events
|
|
into drm-fixes
Fixes for 5.2:
- Extend previous vce fix for resume to uvd and vcn
- Fix bounds checking in ras debugfs interface
- Fix a regression on SI using amdgpu
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613021856.3307-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- three fixes for Intel VT-d to fix a potential dead-lock, a formatting
fix and a bit setting fix
- one fix for the ARM-SMMU to make it work on some platforms with
sub-optimal SMMU emulation
* tag 'iommu-fixes-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Avoid constant zero in TLBI writes
iommu/vt-d: Set the right field for Page Walk Snoop
iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock
iommu: Add missing new line for dma type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A single fix for the PCA953x driver affecting some fringe variants of
the chip"
* tag 'gpio-v5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: hack to fix 24 bit gpio expanders
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Sean writes:
meson: A few G12A fixes across the driver (Neil)
quirks: A couple quirks for GPD devices (Hans)
gem_shmem: Use writecombine when vmapping non-dmabuf BOs (Boris)
panfrost: A couple tweaks to requiring devfreq (Neil & Ezequiel)
edid: Ensure we return the override mode when ddc probe fails (Jani)
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190613143946.GA24233@art_vandelay
|
|
Logan noticed that devm_memremap_pages_release() kills the percpu_ref
drops all the page references that were acquired at init and then
immediately proceeds to unplug, arch_remove_memory(), the backing pages
for the pagemap. If for some reason device shutdown actually collides
with a busy / elevated-ref-count page then arch_remove_memory() should
be deferred until after that reference is dropped.
As it stands the "wait for last page ref drop" happens *after*
devm_memremap_pages_release() returns, which is obviously too late and
can lead to crashes.
Fix this situation by assigning the responsibility to wait for the
percpu_ref to go idle to devm_memremap_pages() with a new ->cleanup()
callback. Implement the new cleanup callback for all
devm_memremap_pages() users: pmem, devdax, hmm, and p2pdma.
Link: http://lkml.kernel.org/r/155727339156.292046.5432007428235387859.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 41e94a851304 ("add devm_memremap_pages")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In preparation for fixing a race between devm_memremap_pages_release()
and the final put of a page from the device-page-map, allocate a
percpu-ref per p2pdma resource mapping.
Link: http://lkml.kernel.org/r/155727338646.292046.9922678317501435597.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pci_p2pdma_add_resource() implementation immediately frees the pgmap
if gen_pool_add_virt() fails. However, that means that when @dev
triggers a devres release devm_memremap_pages_release() will crash
trying to access the freed @pgmap.
Use the new devm_memunmap_pages() to manually free the mapping in the
error path.
Link: http://lkml.kernel.org/r/155727337603.292046.13101332703665246702.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fixes: 52916982af48 ("PCI/P2PDMA: Support peer-to-peer memory")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/devm_memremap_pages: Fix page release race", v2.
Logan audited the devm_memremap_pages() shutdown path and noticed that
it was possible to proceed to arch_remove_memory() before all potential
page references have been reaped.
Introduce a new ->cleanup() callback to do the work of waiting for any
straggling page references and then perform the percpu_ref_exit() in
devm_memremap_pages_release() context.
For p2pdma this involves some deeper reworks to reference count
resources on a per-instance basis rather than a per pci-device basis. A
modified genalloc api is introduced to convey a driver-private pointer
through gen_pool_{alloc,free}() interfaces. Also, a
devm_memunmap_pages() api is introduced since p2pdma does not
auto-release resources on a setup failure.
The dax and pmem changes pass the nvdimm unit tests, and the p2pdma
changes should now pass testing with the pci_p2pdma_release() fix.
Jrme, how does this look for HMM?
This patch (of 6):
The devm_add_action() facility allows a resource allocation routine to
add custom devm semantics. One such user is devm_memremap_pages().
There is now a need to manually trigger
devm_memremap_pages_release(). Introduce devm_release_action() so the
release action can be triggered via a new devm_memunmap_pages() api in a
follow-on change.
Link: http://lkml.kernel.org/r/155727336530.292046.2926860263201336366.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- regression fixes (reverts) for module loading changes that turned out
to be incompatible with some userspace, from Benjamin Tissoires
- regression fix for special Logitech unifiying receiver 0xc52f, from
Hans de Goede
- a few device ID additions to logitech driver, from Hans de Goede
- fix for Bluetooth support on 2nd-gen Wacom Intuos Pro, from Jason
Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-dj: Fix 064d:c52f receiver support
Revert "HID: core: Call request_module before doing device_add"
Revert "HID: core: Do not call request_module() in async context"
Revert "HID: Increase maximum report size allowed by hid_field_extract()"
HID: a4tech: fix horizontal scrolling
HID: hyperv: Add a module description line
HID: logitech-hidpp: Add support for the S510 remote control
HID: multitouch: handle faulty Elo touch device
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact
HID: wacom: Don't report anything prior to the tool entering range
HID: wacom: Don't set tool type until we're in range
HID: rmi: Use SET_REPORT request on control endpoint for Acer Switch 3 and 5
HID: logitech-hidpp: add support for the MX5500 keyboard
HID: logitech-dj: add support for the Logitech MX5500's Bluetooth Mini-Receiver
HID: i2c-hid: add iBall Aer3 to descriptor override
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.2-rc5:
- Fix DMC firmware input validation to avoid buffer overflow
- Fix perf register access whitelist for userspace
- Fix DSI panel on GPD MicroPC
- Fix per-pixel alpha with CCS
- Fix HDMI audio for SDVO
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y325x22w.fsf@intel.com
|
|
The removal of CONFIG_LBDAF changed the type of sector_t from "unsigned
long" to "u64" aka "unsigned long long" on 64-bit platforms, leading to
a compiler warning regression:
drivers/block/ps3vram.c: In function ‘ps3vram_probe’:
drivers/block/ps3vram.c:770:23: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 4 has type ‘sector_t {aka long long unsigned int}’ [-Wformat=]
Fix this by using "%llu" instead.
Fixes: 72deb455b5ec619f ("block: remove CONFIG_LBDAF")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We've received a bugreport that using LPM with ST1000LM024 drives leads
to system lockups. So it seems that these models are buggy in more then
1 way. Add NOLPM quirk to the existing quirks entry for BROKEN_FPDMA_AA.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330
Cc: stable@vger.kernel.org
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When people set a writeback percent via sysfs file,
/sys/block/bcache<N>/bcache/writeback_percent
current code directly sets BCACHE_DEV_WB_RUNNING to dc->disk.flags
and schedules kworker dc->writeback_rate_update.
If there is no cache set attached to, the writeback kernel thread is
not running indeed, running dc->writeback_rate_update does not make
sense and may cause NULL pointer deference when reference cache set
pointer inside update_writeback_rate().
This patch checks whether the cache set point (dc->disk.c) is NULL in
sysfs interface handler, and only set BCACHE_DEV_WB_RUNNING and
schedule dc->writeback_rate_update when dc->disk.c is not NULL (it
means the cache device is attached to a cache set).
This problem might be introduced from initial bcache commit, but
commit 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly")
changes part of the original code piece, so I add 'Fixes: 3fd47bfe55b0'
to indicate from which commit this patch can be applied.
Fixes: 3fd47bfe55b0 ("bcache: stop dc->writeback_rate_update properly")
Reported-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().
See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k) \
438 ({ \
439 struct bkey *_ret = NULL; \
440 \
441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
443 \
444 if (!_ret->low) \
445 _ret->high--; \
446 _ret->low--; \
447 } \
448 \
449 _ret; \
450 })
At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.
Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()")
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Rolf Fokkens <rolf@rolffokkens.nl>
Reviewed-by: Pierre JUHEN <pierre.juhen@orange.fr>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Tested-by: Pierre JUHEN <pierre.juhen@orange.fr>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Nix <nix@esperi.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch removes the check in the null_blk_zoned for report zone
command, where it checks for the dev-,>zoned before executing the report
zone.
The null_zone_report() function is a block_device operation callback
which is initialized in the null_blk_main.c and gets called as a part
of blkdev for report zone IOCTL (BLKREPORTZONE).
blkdev_ioctl()
blkdev_report_zones_ioctl()
blkdev_report_zones()
blk_report_zones()
disk->fops->report_zones()
nullb_zone_report();
The null_zone_report() will never get executed on the non-zoned block
device, in the non zoned block device blk_queue_is_zoned() will always
be false which is first check the blkdev_report_zones_ioctl()
before actual low level driver report zone callback is executed.
Here is the detailed scenario:-
1. modprobe null_blk
null_init
null_alloc_dev
dev->zoned = 0
null_add_dev
dev->zoned == 0
so we don't set the q->limits.zoned = BLK_ZONED_HR
2. blkzone report /dev/nullb0
blkdev_ioctl()
blkdev_report_zones_ioctl()
blk_queue_is_zoned()
blk_queue_is_zoned
q->limits.zoned == 0
return false
if (!blk_queue_is_zoned(q)) <--- true
return -ENOTTY;
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fixes SI cards running on amdgpu.
Fixes: 1929059893022 ("drm/amd/amdgpu: add RLC firmware to support raven1 refresh")
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=110883
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The "block" variable can be set by the user through debugfs, so it can
be quite large which leads to shift wrapping here. This means we report
a "block" as supported when it's not, and that leads to array overflows
later on.
This bug is not really a security issue in real life, because debugfs is
generally root only.
Fixes: 36ea1bd2d084 ("drm/amdgpu: add debugfs ctrl node")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes
CK writes:
This include unbind error fix, clock control flow refinement, and PRIME
mmap with page offset.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1560325868.3259.6.camel@mtksdaap41
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a debug warning for satellite tuning at dvb core was producing too
much noise
- a regression at hfi_parser on Venus driver
* tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: venus: hfi_parser: fix a regression in parser
media: dvb: warning about dvb frequency limits produces too much noise
|
|
Adding check to typec_altmode_get_partner() to prevent
potential NULL pointer dereference.
Reported-by: Vladimir Yerilov <openmindead@gmail.com>
Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With v5.2-rc1, The ftrace functions_graph tracer locks up whenever it is
enabled on arm64.
Since commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use
arch_timer_read_counter to access stable counters") a function pointer
is consistently used to read the counter instead of potentially
referencing an inlinable function.
The graph tracers relies on accessing the timer counters to compute the
time spent in functions which causes the lockup when attempting to trace
these code paths.
Annotate the arm arch timer counter accessors as notrace.
Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use
arch_timer_read_counter to access stable counters")
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The devm_gpiod_request_gpiod() call will add "-gpios" to
any passed connection ID before looking it up.
I do not think the reset GPIO on this platform is named
"reset-gpios-gpios" but rather "reset-gpios" in the device
tree, so fix this up so that we get a proper reset GPIO
handle.
Also drop the inclusion of the legacy GPIO header.
Fixes: 0e8ce93bdceb ("i2c: pca-platform: add devicetree awareness")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We've moved the override and firmware EDID (simply "override EDID" from
now on) handling to the low level drm_do_get_edid() function in order to
transparently use the override throughout the stack. The idea is that
you get the override EDID via the ->get_modes() hook.
Unfortunately, there are scenarios where the DDC probe in drm_get_edid()
called via ->get_modes() fails, although the preceding ->detect()
succeeds.
In the case reported by Paul Wise, the ->detect() hook,
intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the
case reported by Ilpo Järvinen, there is no ->detect() hook, which is
interpreted as connected. The subsequent DDC probe reached via
->get_modes() fails, and we don't even look at the override EDID,
resulting in no modes being added.
Because drm_get_edid() is used via ->detect() all over the place, we
can't trivially remove the DDC probe, as it leads to override EDID
effectively meaning connector forcing. The goal is that connector
forcing and override EDID remain orthogonal.
Generally, the underlying problem here is the conflation of ->detect()
and ->get_modes() via drm_get_edid(). The former should just detect, and
the latter should just get the modes, typically via reading the EDID. As
long as drm_get_edid() is used in ->detect(), it needs to retain the DDC
probe. Or such users need to have a separate DDC probe step first.
The EDID caching between ->detect() and ->get_modes() done by some
drivers is a further complication that prevents us from making
drm_do_get_edid() adapt to the two cases.
Work around the regression by falling back to a separate attempt at
getting the override EDID at drm_helper_probe_single_connector_modes()
level. With a working DDC and override EDID, it'll never be called; the
override EDID will come via ->get_modes(). There will still be a failing
DDC probe attempt in the cases that require the fallback.
v2:
- Call drm_connector_update_edid_property (Paul)
- Update commit message about EDID caching (Daniel)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583
Reported-by: Paul Wise <pabs3@bonedaddy.net>
Cc: Paul Wise <pabs3@bonedaddy.net>
References: http://mid.mail-archive.com/alpine.DEB.2.20.1905262211270.24390@whs-18.cs.helsinki.fi
Reported-by: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Cc: Ilpo Järvinen <ilpo.jarvinen@cs.helsinki.fi>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
References: 15f080f08d48 ("drm/edid: respect connector force for drm_get_edid ddc probe")
Fixes: 53fd40a90f3c ("drm: handle override and firmware EDID at drm_do_get_edid() level")
Cc: <stable@vger.kernel.org> # v4.15+ 56a2b7f2a39a drm/edid: abstract override/firmware EDID retrieval
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Tested-by: Paul Wise <pabs3@bonedaddy.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610093054.28445-1-jani.nikula@intel.com
|
|
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.
Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
|
|
Abstract the debugfs override and the firmware EDID retrieval
function. We'll be needing it in the follow-up. No functional changes.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Tested-by: Paul Wise <pabs3@bonedaddy.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607110513.12072-1-jani.nikula@intel.com
|
|
Add devm_free_irq() call to mlxreg-hotplug remove() for clean release
of devices irq resource. Fix debugobjects warning triggered by rmmod
It prevents of use-after-free memory, related to
mlxreg_hotplug_work_handler.
Issue has been reported as debugobjects warning triggered by
'rmmod mlxtreg-hotplug' flow, while running kernel with
CONFIG_DEBUG_OBJECTS* options.
[ 2489.623551] ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler+0x0/0x7f0 [mlxreg_hotplug]
[ 2489.637097] WARNING: CPU: 5 PID: 3924 at lib/debugobjects.c:328 debug_print_object+0xfe/0x180
[ 2489.637165] RIP: 0010:debug_print_object+0xfe/0x180
?
[ 2489.637214] Call Trace:
[ 2489.637225] __debug_check_no_obj_freed+0x25e/0x320
[ 2489.637231] kfree+0x82/0x110
[ 2489.637238] release_nodes+0x33c/0x4e0
[ 2489.637242] ? devres_remove_group+0x1b0/0x1b0
[ 2489.637247] device_release_driver_internal+0x146/0x270
[ 2489.637251] driver_detach+0x73/0xe0
[ 2489.637254] bus_remove_driver+0xa1/0x170
[ 2489.637261] __x64_sys_delete_module+0x29e/0x320
[ 2489.637265] ? __ia32_sys_delete_module+0x320/0x320
[ 2489.637268] ? blkcg_exit_queue+0x20/0x20
[ 2489.637273] ? task_work_run+0x7d/0x100
[ 2489.637278] ? exit_to_usermode_loop+0x5b/0xf0
[ 2489.637281] do_syscall_64+0x73/0x160
[ 2489.637287] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 2489.637290] RIP: 0033:0x7f95c3596fd7
The difference in release flow with and with no devm_free_irq is listed
below:
bus: 'platform': remove driver mlxreg-hotplug
mlxreg_hotplug_remove(start)
-> devm_free_irq (with new code)
mlxreg_hotplug_remove (end)
release_nodes (start)
mlxreg-hotplug: DEVRES REL devm_hwmon_release (8 bytes)
device: 'hwmon3': device_unregister
PM: Removing info for No Bus:hwmon3
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (88 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (6 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes)
mlxreg-hotplug: DEVRES REL devm_irq_release (16 bytes) (no new code)
mlxreg-hotplug: DEVRES REL devm_kzalloc_release (1376 bytes)
------------[ cut here ]------------ (no new code):
ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler
release_nodes(end)
driver: 'mlxreg-hotplug': driver_release
Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Fix the issue found while running kernel with the option
CONFIG_DEBUG_TEST_DRIVER_REMOVE.
Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers
few underlying 'i2c-mux-reg' devices:
priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr,
NULL, 0);
...
for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
priv->pdev_mux[i] = platform_device_register_resndata(
&mlxplat_dev->dev,
"i2c-mux-reg", i, NULL,
0, &mlxplat_mux_data[i],
sizeof(mlxplat_mux_data[i]));
But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and
not mlxplat_dev->dev.
Patch fixes parent device parameter in a call to
platform_device_register_resndata() for "i2c-mux-reg".
It solves the race during initialization flow while 'i2c_mlxcpld.1' is
removing after probe, while 'i2c-mux-reg.0' is still in probing flow:
'i2c_mlxcpld.1' flow: probe -> remove -> probe.
'i2c-mux-reg.0' flow: probe -> ...
[ 12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform
[ 12:621117] device: 'i2c_mlxcpld.1': device_add
[ 12:621155] bus: 'platform': add device i2c_mlxcpld.1
[ 12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat
[ 12:621395] device: 'i2c-mux-reg.0': device_add
[ 12:621425] bus: 'platform': add device i2c-mux-reg.0
[ 12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat
[ 12:621828] device: 'i2c-mux-reg.1': device_add
[ 12:621892] bus: 'platform': add device i2c-mux-reg.1
[ 12:621906] bus: 'platform': add driver i2c_mlxcpld
[ 12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld
[ 12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1
[ 12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state
[ 12:622293] device: 'i2c-1': device_add
[ 12:627280] bus: 'i2c': add device i2c-1
[ 12:627692] device: 'i2c-1': device_add
[ 12.629639] bus: 'platform': add driver i2c-mux-reg
[ 12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[ 12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[ 12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[ 12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[ 12.629986] platform i2c-mux-reg.0: Added to deferred list
[ 12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[ 12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[ 12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[ 12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[ 12.630252] platform i2c-mux-reg.1: Added to deferred list
[ 12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list
[ 12.640900] platform i2c-mux-reg.0: Retrying from deferred list
[ 12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[ 12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[ 12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[ 12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral
[ 12.641187] platform i2c-mux-reg.0: Added to deferred list
[ 12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list
[ 12.641219] platform i2c-mux-reg.1: Retrying from deferred list
[ 12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg
[ 12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1
[ 12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state
[ 12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral
[ 12.641469] platform i2c-mux-reg.1: Added to deferred list
[ 12.646427] device: 'i2c-1': device_add
[ 12.646647] bus: 'i2c': add device i2c-1
[ 12.647104] device: 'i2c-1': device_add
[ 12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list
[ 12.669240] platform i2c-mux-reg.0: Retrying from deferred list
[ 12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg
[ 12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0
[ 12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state
[ 12.669585] device: 'i2c-2': device_add
[ 12.669795] bus: 'i2c': add device i2c-2
[ 12.670201] device: 'i2c-2': device_add
[ 12.671427] i2c i2c-1: Added multiplexed i2c bus 2
[ 12.671514] device: 'i2c-3': device_add
[ 12.671724] bus: 'i2c': add device i2c-3
[ 12.672136] device: 'i2c-3': device_add
[ 12.673378] i2c i2c-1: Added multiplexed i2c bus 3
[ 12.673472] device: 'i2c-4': device_add
[ 12.673676] bus: 'i2c': add device i2c-4
[ 12.674060] device: 'i2c-4': device_add
[ 12.675861] i2c i2c-1: Added multiplexed i2c bus 4
[ 12.675941] device: 'i2c-5': device_add
[ 12.676150] bus: 'i2c': add device i2c-5
[ 12.676550] device: 'i2c-5': device_add
[ 12.678103] i2c i2c-1: Added multiplexed i2c bus 5
[ 12.678193] device: 'i2c-6': device_add
[ 12.678395] bus: 'i2c': add device i2c-6
[ 12.678774] device: 'i2c-6': device_add
[ 12.679969] i2c i2c-1: Added multiplexed i2c bus 6
[ 12.680065] device: 'i2c-7': device_add
[ 12.680275] bus: 'i2c': add device i2c-7
[ 12.680913] device: 'i2c-7': device_add
[ 12.682506] i2c i2c-1: Added multiplexed i2c bus 7
[ 12.682600] device: 'i2c-8': device_add
[ 12.682808] bus: 'i2c': add device i2c-8
[ 12.683189] device: 'i2c-8': device_add
[ 12.683907] device: 'i2c-1': device_unregister
[ 12.683945] device: 'i2c-1': device_unregister
[ 12.684387] device: 'i2c-1': device_create_release
[ 12.684536] bus: 'i2c': remove device i2c-1
[ 12.686019] i2c i2c-8: Failed to create compatibility class link
[ 12.686086] ------------[ cut here ]------------
[ 12.686087] can't create symlink to mux device
[ 12.686224] Workqueue: events deferred_probe_work_func
[ 12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[ 12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux]
[ 0x190/0x190 [i2c_mux]
[ 12.686300] ? i2c_mux_alloc+0xac/0x110 [i2c_mux]
[ 12.686306] ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg]
[ 12.686313] i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg]
[ 12.686322] ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg]
[ 12.686346] platform_drv_probe+0xa8/0x110
[ 12.686351] really_probe+0x185/0x720
[ 12.686358] driver_probe_device+0xdf/0x1f0
...
[ 12.686522] i2c i2c-1: Added multiplexed i2c bus 8
[ 12.686621] device: 'i2c-9': device_add
[ 12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1)
[ 12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2)
[ 12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2)
[ 12.714494] device: 'i2c-8': device_unregister
[ 12.714537] device: 'i2c-8': device_unregister
Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
asus_nb_wmi
Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Tested-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.
Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com
(cherry picked from commit bf210f6c9e6fd8dc0d154ad18f741f20e64a3fce)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: zardam@gmail.com
Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
We forgot to set .has_alpha=true for the A+CCS formats when the code
started to consult .has_alpha. This manifests as A+CCS being treated
as X+CCS which means no per-pixel alpha blending. Fix the format
list appropriately.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Heinrich Fink <heinrich.fink@daqri.com>
Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142500.25680-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 38f300410f3e15b6fec76c8d8baed7111b5ea4e4)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.
Before this patch:
# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
-rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin
# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
# modprobe i915
# dmesg| grep -i dmc
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)
i.e. it loads random data. Now it fails like below:
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
Before reading any part of the firmware file, validate the input first.
Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com
(cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/
The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed
The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.
This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.
Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com
(cherry picked from commit 2c1c55252647abd989b94f725b190c700312d053)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"One tiny fix for ARM64 where we could allocate the SWIOTLB twice"
* 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
xen/swiotlb: don't initialize swiotlb twice on arm64
|
|
Pull VFIO fixes from Alex Williamson:
"Fix mdev device create/remove paths to provide initialized device for
parent driver create callback and correct ordering of device removal
from bus prior to initiating removal by parent.
Also resolve races between parent removal and device create/remove
paths (all from Parav Pandit)"
* tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio:
vfio/mdev: Synchronize device create/remove with parent removal
vfio/mdev: Avoid creating sysfs remove file on stale device removal
vfio/mdev: Improve the create/remove sequence
|
|
[What]
readptr read always returns zero, since most likely
these blocks are either power or clock gated.
[How]
fetch rptr after amdgpu_ring_alloc() which informs
the power management code that the block is about to be
used and hence the gating is turned off.
Signed-off-by: Louis Li <Ching-shih.Li@amd.com>
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Just one driver specific fix here, for a boot regression introduced
during some modernization work on the tps6507x driver"
* tag 'regulator-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6507x: Fix boot regression due to testing wrong init_data pointer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of fixes here.
One core fix for error handling when we fail to set up the hardware
before initiating a transfer and another one reverting a change in the
core which broke Raspberry Pi in common use cases as part of some
optimization work.
There's also a couple of driver specific fixes"
* tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: abort spi_sync if failed to prepare_transfer_hardware
spi: spi-fsl-spi: call spi_finalize_current_message() at the end
spi: bitbang: Fix NULL pointer dereference in spi_unregister_master
spi: Fix Raspberry Pi breakage
|
|
Panfrost depends on the simple_ondemand governor, and therefore
it's a required configuration. Select it.
Fixes: f3617b449d0b ("drm/panfrost: Select devfreq")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605184859.9432-1-ezequiel@collabora.com
|
