| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fixes for the I2C testunit, the Renesas R-Car driver and some
MAINTAINERS corrections"
* tag 'i2c-for-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: avoid re-issued work after read message
i2c: rcar: ensure Gen3+ reset does not disturb local targets
i2c: mark HostNotify target address as used
i2c: testunit: correct Kconfig description
MAINTAINERS: VIRTIO I2C loses a maintainer, gains a reviewer
MAINTAINERS: delete entries for Thor Thayer
i2c: rcar: clear NO_RXDMA flag after resetting
i2c: rcar: bring hardware to known state when probing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
This tag includes three fixes for the Renesas R-Car driver:
1. Ensures the device is in a known state after probing.
2. Allows clearing the NO_RXDMA flag after a reset.
3. Forces a reset before any transfer on Gen3+ platforms to
prevent disruption of the configuration during parallel
transfers.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking fixes from Jakub Kicinski:
"A quick follow up to yesterday's pull. We got a regressions report for
the bnxt patch as soon as it got to your tree. The ethtool fix is also
good to have, although it's an older regression.
Current release - regressions:
- eth: bnxt_en: fix crash in bnxt_get_max_rss_ctx_ring() on older HW
when user tries to decrease the ring count
Previous releases - regressions:
- ethtool: fix RSS setting, accept "no change" setting if the driver
doesn't support the new features
- eth: i40e: remove needless retries of NVM update, don't wait 20min
when we know the firmware update won't succeed"
* tag 'net-6.10-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()
octeontx2-af: fix issue with IPv4 match for RSS
octeontx2-af: fix issue with IPv6 ext match for RSS
octeontx2-af: fix detection of IP layer
octeontx2-af: fix a issue with cpt_lf_alloc mailbox
octeontx2-af: replace cpt slot with lf id on reg write
i40e: fix: remove needless retries of NVM update
net: ethtool: Fix RSS setting
|
|
On older chips not supporting multiple RSS contexts, reducing
ethtool channels will crash:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 7032 Comm: ethtool Tainted: G S 6.10.0-rc4 #1
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
Code: c3 d3 eb 4c 8b 83 38 01 00 00 48 8d bb 38 01 00 00 4c 39 c7 74 42 41 8d 54 24 ff 31 c0 0f b7 d2 4c 8d 4c 12 02 66 85 ed 74 1d <49> 8b 90 b8 00 00 00 49 8d 34 11 0f b7 0a 66 39 c8 0f 42 c1 48 83
RSP: 0018:ffffaaa501d23ba8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8efdf600c940 RCX: 0000000000000000
RDX: 000000000000007f RSI: ffffffffacf429c4 RDI: ffff8efdf600ca78
RBP: 0000000000000080 R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000001 R11: ffffaaa501d238c0 R12: 0000000000000080
R13: 0000000000000000 R14: ffff8efdf600c000 R15: 0000000000000006
FS: 00007f977a7d2740(0000) GS:ffff8f041f840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000b8 CR3: 00000002320aa004 CR4: 00000000003706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x15/0x60
? page_fault_oops+0x157/0x440
? do_user_addr_fault+0x60/0x770
? _raw_spin_lock_irqsave+0x12/0x40
? exc_page_fault+0x61/0x120
? asm_exc_page_fault+0x22/0x30
? bnxt_get_max_rss_ctx_ring+0x4c/0x90 [bnxt_en]
? bnxt_get_max_rss_ctx_ring+0x25/0x90 [bnxt_en]
bnxt_set_channels+0x9d/0x340 [bnxt_en]
ethtool_set_channels+0x14b/0x210
__dev_ethtool+0xdf8/0x2890
? preempt_count_add+0x6a/0xa0
? percpu_counter_add_batch+0x23/0x90
? filemap_map_pages+0x417/0x4a0
? avc_has_extended_perms+0x185/0x420
? __pfx_udp_ioctl+0x10/0x10
? sk_ioctl+0x55/0xf0
? kmalloc_trace_noprof+0xe0/0x210
? dev_ethtool+0x54/0x170
dev_ethtool+0xa2/0x170
dev_ioctl+0xbe/0x530
sock_do_ioctl+0xa3/0xf0
sock_ioctl+0x20d/0x2e0
bp->rss_ctx_list is not initialized if the chip or firmware does not
support multiple RSS contexts. Fix it by adding a check in
bnxt_get_max_rss_ctx_ring() before proceeding to reference
bp->rss_ctx_list.
Fixes: 0d1b7d6c9274 ("bnxt: fix crashes when reducing ring count with active RSS contexts")
Reported-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/netdev/ZpFEJeNpwxW1aW9k@gmail.com/
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240712175318.166811-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- qcom: Skip retention level for rpmhpd's
* tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- davinci_mmc: Prevent transmitted data size from exceeding sgm's
length
- sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
* tag 'mmc-v6.10-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: davinci_mmc: Prevent transmitted data size from exceeding sgm's length
mmc: sdhci: Fix max_seg_size for 64KiB PAGE_SIZE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms"
* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
MAINTAINERS: Add more maintainers for omaps
ARM: davinci: Convert comma to semicolon
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
soc: qcom: pmic_glink: disable UCSI on sc8280xp
arm64: defconfig: enable Elan i2c-hid driver
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: allwinner: Fix PMIC interrupt number
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small remaining driver fixes for 6.10-final that have
all been in linux-next for a while and resolve reported issues.
Included in here are:
- mei driver fixes (and a spelling fix at the end just to be clean)
- iio driver fixes for reported problems
- fastrpc bugfixes
- nvmem small fixes"
* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: vsc: Fix spelling error
mei: vsc: Enhance SPI transfer of IVSC ROM
mei: vsc: Utilize the appropriate byte order swap function
mei: vsc: Prevent timeout error with added delay post-firmware download
mei: vsc: Enhance IVSC chipset stability during warm reboot
nvmem: core: limit cell sysfs permissions to main attribute ones
nvmem: core: only change name to fram for current attribute
nvmem: meson-efuse: Fix return value of nvmem callbacks
nvmem: rmem: Fix return value of rmem_read()
misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
hpet: Support 32-bit userspace
misc: fastrpc: Restrict untrusted app to attach to privileged PD
misc: fastrpc: Fix ownership reassignment of remote heap
misc: fastrpc: Fix memory leak in audio daemon attach operation
misc: fastrpc: Avoid updating PD type for capability request
misc: fastrpc: Copy the complete capability structure to user
misc: fastrpc: Fix DSP capabilities request
iio: light: apds9306: Fix error handing
iio: trigger: Fix condition for own trigger
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small serial driver fixes for 6.10-final. Included in
here are:
- qcom-geni fixes for a much much much discussed issue and everyone
now seems to be agreed that this is the proper way forward to
resolve the reported lockups
- imx serial driver bugfixes
- 8250_omap errata fix
- ma35d1 serial driver bugfix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: do not kill the machine on fifo underrun
serial: qcom-geni: fix hard lockup on buffer flush
serial: qcom-geni: fix soft lockup on sw flow control and suspend
serial: imx: ensure RTS signal is not left active after shutdown
tty: serial: ma35d1: Add a NULL check for of_node
serial: 8250_omap: Fix Errata i2310 with RX FIFO level check
serial: imx: only set receiver level if it is zero
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for
6.10-final. Included in here are:
- new usb-serial device ids for reported devices
- syzbot-triggered duplicate endpoint bugfix
- gadget bugfix for configfs memory overwrite
- xhci resume bugfix
- new device quirk added
- usb core error path bugfix
All of these have been in linux-next (most for a while) with no
reported issues"
* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
usb: dwc3: pci: add support for the Intel Panther Lake
usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
xhci: always resume roothubs if xHC was reset during resume
USB: serial: option: add Telit generic core-dump composition
USB: serial: option: add Fibocom FM350-GL
USB: serial: option: add Telit FN912 rmnet compositions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too"
* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable Mute LED on HP 250 G7
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
ASoC: rt711-sdw: add missing readable registers
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
firmware: cs_dsp: Validate payload length before processing block
firmware: cs_dsp: Return error if block header overflows file
firmware: cs_dsp: Fix overflow checking of wmfw header
|
|
While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.
Fixes: 41a7aa7b800d ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes: 21e6699e5cd6 ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.
Fixes: de2854c87c64 ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.
Fixes: ae454086e3c2 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The to-be-fixed commit rightfully prevented that the registers will be
cleared. However, the index must be cleared. Otherwise a read message
will re-issue the last work. Fix it and add a comment describing the
situation.
Fixes: c422b6a63024 ("i2c: testunit: don't erase registers after STOP")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a547 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a547 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
R-Car Gen3+ needs a reset before every controller transfer. That erases
configuration of a potentially in parallel running local target
instance. To avoid this disruption, avoid controller transfers if a
local target is running. Also, disable SMBusHostNotify because it
requires being a controller and local target at the same time.
Fixes: 3b770017b03a ("i2c: rcar: handle RXDMA HW behaviour on Gen3")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mikulas Patocka:
- Fix broken discard for device mapper VDO target
* tag 'for-6.10/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm vdo: replace max_discard_sectors with max_hw_discard_sectors
|
|
Commit 4f563a64732d ("block: add a max_user_discard_sectors queue
limit") changed block core to set max_discard_sectors to:
min(lim->max_hw_discard_sectors, lim->max_user_discard_sectors)
Commit 825d8bbd2f32 ("dm: always manage discard support in terms
of max_hw_discard_sectors") fixed most dm targetss to deal with
this, by replacing max_discard_sectors with max_hw_discard_sectors.
Unfortunately, dm-vdo did not get fixed at that time.
Fixes: 825d8bbd2f32 ("dm: always manage discard support in terms of max_hw_discard_sectors")
Signed-off-by: Bruce Johnston <bjohnsto@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"This fixes two regressions that have been bubbling along for a large
part of this release.
One is a revert of the multi mode support for the OMAP SPI controller,
this introduced regressions on a number of systems and while there has
been progress on fixing those we've not got something that works for
everyone yet so let's just drop the change for now.
The other is a series of fixes from David Lechner for his recent
message optimisation work, this interacted badly with spi-mux which
is altogether too clever with recursive use of the bus and creates
situations that hadn't been considered.
There are also a couple of small driver specific fixes, including one
more patch from David for sleep duration calculations in the AXI
driver"
* tag 'spi-fix-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: mux: set ctlr->bits_per_word_mask
spi: add defer_optimize_message controller flag
spi: don't unoptimize message in spi_async()
spi: omap2-mcspi: Revert multi mode support
spi: davinci: Unset POWERDOWN bit when releasing resources
spi: axi-spi-engine: fix sleep calculation
spi: imx: Don't expect DMA for i.MX{25,35,50,51,53} cspi devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- core: fix rc7's __skb_datagram_iter() regression
Current release - new code bugs:
- eth: bnxt: fix crashes when reducing ring count with active RSS
contexts
Previous releases - regressions:
- sched: fix UAF when resolving a clash
- skmsg: skip zero length skb in sk_msg_recvmsg2
- sunrpc: fix kernel free on connection failure in
xs_tcp_setup_socket
- tcp: avoid too many retransmit packets
- tcp: fix incorrect undo caused by DSACK of TLP retransmit
- udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
- eth: ks8851: fix deadlock with the SPI chip variant
- eth: i40e: fix XDP program unloading while removing the driver
Previous releases - always broken:
- bpf:
- fix too early release of tcx_entry
- fail bpf_timer_cancel when callback is being cancelled
- bpf: fix order of args in call to bpf_map_kvcalloc
- netfilter: nf_tables: prefer nft_chain_validate
- ppp: reject claimed-as-LCP but actually malformed packets
- wireguard: avoid unaligned 64-bit memory accesses"
* tag 'net-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net, sunrpc: Remap EPERM in case of connection failure in xs_tcp_setup_socket
net/sched: Fix UAF when resolving a clash
net: ks8851: Fix potential TX stall after interface reopen
udp: Set SOCK_RCU_FREE earlier in udp_lib_get_port().
netfilter: nf_tables: prefer nft_chain_validate
netfilter: nfnetlink_queue: drop bogus WARN_ON
ethtool: netlink: do not return SQI value if link is down
ppp: reject claimed-as-LCP but actually malformed packets
selftests/bpf: Add timer lockup selftest
net: ethernet: mtk-star-emac: set mac_managed_pm when probing
e1000e: fix force smbus during suspend flow
tcp: avoid too many retransmit packets
bpf: Defer work in bpf_timer_cancel_and_free
bpf: Fail bpf_timer_cancel when callback is being cancelled
bpf: fix order of args in call to bpf_map_kvcalloc
net: ethernet: lantiq_etop: fix double free in detach
i40e: Fix XDP program unloading while removing the driver
net: fix rc7's __skb_datagram_iter()
net: ks8851: Fix deadlock with the SPI chip variant
octeontx2-af: Fix incorrect value output on error path in rvu_check_rsrc_availability()
...
|
|
No check is done on the size of the data to be transmiited. This causes
a kernel panic when this size exceeds the sg_miter's length.
Limit the number of transmitted bytes to sgm->length.
Cc: stable@vger.kernel.org
Fixes: ed01d210fd91 ("mmc: davinci_mmc: Use sg_miter for PIO")
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20240711081838.47256-2-bastien.curutchet@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
blk_queue_max_segment_size() ensured:
if (max_size < PAGE_SIZE)
max_size = PAGE_SIZE;
whereas:
blk_validate_limits() makes it an error:
if (WARN_ON_ONCE(lim->max_segment_size < PAGE_SIZE))
return -EINVAL;
The change from one to the other, exposed sdhci which was setting maximum
segment size too low in some circumstances.
Fix the maximum segment size when it is too low.
Fixes: 616f87661792 ("mmc: pass queue_limits to blk_mq_alloc_disk")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240710180737.142504-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The amount of TX space in the hardware buffer is tracked in the tx_space
variable. The initial value is currently only set during driver probing.
After closing the interface and reopening it the tx_space variable has
the last value it had before close. If it is smaller than the size of
the first send packet after reopeing the interface the queue will be
stopped. The queue is woken up after receiving a TX interrupt but this
will never happen since we did not send anything.
This commit moves the initialization of the tx_space variable to the
ks8851_net_open function right before starting the TX queue. Also query
the value from the hardware instead of using a hard coded value.
Only the SPI chip variant is affected by this issue because only this
driver variant actually depends on the tx_space variable in the xmit
function.
Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240709195845.9089-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I2C core handles the local target for receiving HostNotify alerts. There
is no separate driver bound to that address. That means userspace can
access it if desired, leading to further complications if controllers
are not capable of reading their own local target. Bind the local target
to the dummy driver so it will be marked as "handled by the kernel" if
the HostNotify feature is used. That protects aginst userspace access
and prevents other drivers binding to it.
Fixes: 2a71593da34d ("i2c: smbus: add core function handling SMBus host-notify")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
The testunit has nothing to do with 'eeprom', remove that term. It was a
copy&paste leftover.
Fixes: a8335c64c5f0 ("i2c: add slave testunit driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Since 'ppp_async_encode()' assumes valid LCP packets (with code
from 1 to 7 inclusive), add 'ppp_check_packet()' to ensure that
LCP packet has an actual body beyond PPP_LCP header bytes, and
reject claimed-as-LCP but actually malformed data otherwise.
Reported-by: syzbot+ec0723ba9605678b14bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ec0723ba9605678b14bf
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The below commit introduced a warning message when phy state is not in
the states: PHY_HALTED, PHY_READY, and PHY_UP.
commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
mtk-star-emac doesn't need mdiobus suspend/resume. To fix the warning
message during resume, indicate the phy resume/suspend is managed by the
mac when probing.
Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Jian Hui Lee <jianhui.lee@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240708065210.4178980-1-jianhui.lee@canonical.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 861e8086029e ("e1000e: move force SMBUS from enable ulp function
to avoid PHY loss issue") resolved a PHY access loss during suspend on
Meteor Lake consumer platforms, but it affected corporate systems
incorrectly.
A better fix, working for both consumer and corporate systems, was
proposed in commit bfd546a552e1 ("e1000e: move force SMBUS near the end
of enable_ulp function"). However, it introduced a regression on older
devices, such as [8086:15B8], [8086:15F9], [8086:15BE].
This patch aims to fix the secondary regression, by limiting the scope of
the changes to Meteor Lake platforms only.
Fixes: bfd546a552e1 ("e1000e: move force SMBUS near the end of enable_ulp function")
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218940
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218936
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240709203123.2103296-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One core change that moves a disk start message to a location where it
will only be printed once instead of twice plus a couple of error
handling race fixes in the ufs driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Do not repeat the starting disk message
scsi: ufs: core: Fix ufshcd_abort_one racing issue
scsi: ufs: core: Fix ufshcd_clear_cmd racing issue
|
|
We should allow RXDMA only if the reset was really successful, so clear
the flag after the reset call.
Fixes: 0e864b552b23 ("i2c: rcar: reset controller is mandatory for Gen3+")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Pull VFIO fix from Alex Williamson:
- Recent stable backports are exposing a bug introduced in the v6.10
development cycle where a counter value is uninitialized. This leads
to regressions in userspace drivers like QEMU where where the kernel
might ask for an arbitrary buffer size or return out of memory itself
based on a bogus value. Zero initialize the counter. (Yi Liu)
* tag 'vfio-v6.10' of https://github.com/awilliam/linux-vfio:
vfio/pci: Init the count variable in collecting hot-reset devices
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 6.10-rc8
Here's a fix for a long-standing issue in the mos7840 driver that can trigger
a crash when resuming from system suspend.
Included are also some new modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.10-rc8' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
"One-liner fix for a dmi_system_id array in the toshiba_acpi driver not
being terminated properly.
Something which somehow has escaped detection since being introduced
in 2022 until now"
* tag 'platform-drivers-x86-v6.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: toshiba_acpi: Fix array out-of-bounds access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the sorting of _CST output data in the ACPI processor idle driver
(Kuan-Wei Chiu)"
* tag 'acpi-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Fix invalid comparison with insertion sort for latency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix two issues related to boost frequencies handling, one in the
cpufreq core and one in the ACPI cpufreq driver (Mario Limonciello)"
* tag 'pm-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Mark boost policy as enabled when setting boost
cpufreq: Allow drivers to advertise boost enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a possible NULL pointer dereference in a thermal governor,
fix up the handling of thermal zones enabled before their temperature
can be determined and fix list sorting during thermal zone temperature
updates.
Specifics:
- Prevent the Power Allocator thermal governor from dereferencing a
NULL pointer if it is bound to a tripless thermal zone (Nícolas
Prado)
- Prevent thermal zones enabled too early from staying effectively
dormant forever because their temperature cannot be determined
initially (Rafael Wysocki)
- Fix list sorting during thermal zone temperature updates to ensure
the proper ordering of trip crossing notifications (Rafael
Wysocki)"
* tag 'thermal-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix list sorting in __thermal_zone_device_update()
thermal: core: Call monitor_thermal_zone() if zone temperature is invalid
thermal: gov_power_allocator: Return early in manage if trip_max is NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fix from Rob Herring:
- One fix for PASemi Nemo board interrupts
* tag 'devicetree-fixes-for-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Disable "interrupt-map" parsing for PASEMI Nemo
|
|
The count variable is used without initialization, it results in mistakes
in the device counting and crashes the userspace if the get hot reset info
path is triggered.
Fixes: f6944d4a0b87 ("vfio/pci: Collect hot-reset devices to local buffer")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219010
Reported-by: Žilvinas Žaltiena <zaltys@natrix.lt>
Cc: Beld Zhang <beldzhang@gmail.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240710004150.319105-1-yi.l.liu@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
In order to use toshiba_dmi_quirks[] together with the standard DMI
matching functions, it must be terminated by a empty entry.
Since this entry is missing, an array out-of-bounds access occurs
every time the quirk list is processed.
Fix this by adding the terminating empty entry.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202407091536.8b116b3d-lkp@intel.com
Fixes: 3cb1f40dfdc3 ("drivers/platform: toshiba_acpi: Call HCI_PANEL_POWER_ON on resume on some models")
Cc: stable@vger.kernel.org
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240709143851.10097-1-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The number of the currently released descriptor is never incremented
which results in the same skb being released multiple times.
Fixes: 504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Reported-by: Joe Perches <joe@perches.com>
Closes: https://lore.kernel.org/all/fc1bf93d92bb5b2f99c6c62745507cc22f3a7b2d.camel@perches.com/
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240708205826.5176-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit 6533e558c650 ("i40e: Fix reset path while removing
the driver") introduced a new PF state "__I40E_IN_REMOVE" to block
modifying the XDP program while the driver is being removed.
Unfortunately, such a change is useful only if the ".ndo_bpf()"
callback was called out of the rmmod context because unloading the
existing XDP program is also a part of driver removing procedure.
In other words, from the rmmod context the driver is expected to
unload the XDP program without reporting any errors. Otherwise,
the kernel warning with callstack is printed out to dmesg.
Example failing scenario:
1. Load the i40e driver.
2. Load the XDP program.
3. Unload the i40e driver (using "rmmod" command).
The example kernel warning log:
[ +0.004646] WARNING: CPU: 94 PID: 10395 at net/core/dev.c:9290 unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.010959] RIP: 0010:unregister_netdevice_many_notify+0x7a9/0x870
[...]
[ +0.002726] Call Trace:
[ +0.002457] <TASK>
[ +0.002119] ? __warn+0x80/0x120
[ +0.003245] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005586] ? report_bug+0x164/0x190
[ +0.003678] ? handle_bug+0x3c/0x80
[ +0.003503] ? exc_invalid_op+0x17/0x70
[ +0.003846] ? asm_exc_invalid_op+0x1a/0x20
[ +0.004200] ? unregister_netdevice_many_notify+0x7a9/0x870
[ +0.005579] ? unregister_netdevice_many_notify+0x3cc/0x870
[ +0.005586] unregister_netdevice_queue+0xf7/0x140
[ +0.004806] unregister_netdev+0x1c/0x30
[ +0.003933] i40e_vsi_release+0x87/0x2f0 [i40e]
[ +0.004604] i40e_remove+0x1a1/0x420 [i40e]
[ +0.004220] pci_device_remove+0x3f/0xb0
[ +0.003943] device_release_driver_internal+0x19f/0x200
[ +0.005243] driver_detach+0x48/0x90
[ +0.003586] bus_remove_driver+0x6d/0xf0
[ +0.003939] pci_unregister_driver+0x2e/0xb0
[ +0.004278] i40e_exit_module+0x10/0x5f0 [i40e]
[ +0.004570] __do_sys_delete_module.isra.0+0x197/0x310
[ +0.005153] do_syscall_64+0x85/0x170
[ +0.003684] ? syscall_exit_to_user_mode+0x69/0x220
[ +0.004886] ? do_syscall_64+0x95/0x170
[ +0.003851] ? exc_page_fault+0x7e/0x180
[ +0.003932] entry_SYSCALL_64_after_hwframe+0x71/0x79
[ +0.005064] RIP: 0033:0x7f59dc9347cb
[ +0.003648] Code: 73 01 c3 48 8b 0d 65 16 0c 00 f7 d8 64 89 01 48 83
c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f
05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 16 0c 00 f7 d8 64 89 01 48
[ +0.018753] RSP: 002b:00007ffffac99048 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ +0.007577] RAX: ffffffffffffffda RBX: 0000559b9bb2f6e0 RCX: 00007f59dc9347cb
[ +0.007140] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000559b9bb2f748
[ +0.007146] RBP: 00007ffffac99070 R08: 1999999999999999 R09: 0000000000000000
[ +0.007133] R10: 00007f59dc9a5ac0 R11: 0000000000000206 R12: 0000000000000000
[ +0.007141] R13: 00007ffffac992d8 R14: 0000559b9bb2f6e0 R15: 0000000000000000
[ +0.007151] </TASK>
[ +0.002204] ---[ end trace 0000000000000000 ]---
Fix this by checking if the XDP program is being loaded or unloaded.
Then, block only loading a new program while "__I40E_IN_REMOVE" is set.
Also, move testing "__I40E_IN_REMOVE" flag to the beginning of XDP_SETUP
callback to avoid unnecessary operations and checks.
Fixes: 6533e558c650 ("i40e: Fix reset path while removing the driver")
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240708230750.625986-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Like other SPI controller flags, bits_per_word_mask may be used by a
peripheral driver, so it needs to reflect the capabilities of the
underlying controller.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-3-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding spi_optimize_message() broke the spi-mux driver because it
calls spi_async() from it's transfer_one_message() callback. This
resulted in passing an incorrectly optimized message to the controller.
For example, if the underlying controller has an optimize_message()
callback, this would have not been called and can cause a crash when
the underlying controller driver tries to transfer the message.
Also, since the spi-mux driver swaps out the controller pointer by
replacing msg->spi, __spi_unoptimize_message() was being called with a
different controller than the one used in __spi_optimize_message(). This
could cause a crash when attempting to free the message resources when
__spi_unoptimize_message() is called in spi_finalize_current_message()
since it is being called with a controller that did not allocate the
resources.
This is fixed by adding a defer_optimize_message flag for controllers.
This flag causes all of the spi_[maybe_][un]optimize_message() calls to
be a no-op (other than attaching a pointer to the spi device to the
message).
This allows the spi-mux driver to pass an unmodified message to
spi_async() in spi_mux_transfer_one_message() after the spi device has
been swapped out. This causes __spi_optimize_message() and
__spi_unoptimize_message() to be called only once per message and with
the correct/same controller in each case.
Reported-by: Oleksij Rempel <o.rempel@pengutronix.de>
Closes: https://lore.kernel.org/linux-spi/Zn6HMrYG2b7epUxT@pengutronix.de/
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/linux-spi/20240628-awesome-discerning-bear-1621f9-mkl@pengutronix.de/
Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-2-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Calling spi_maybe_unoptimize_message() in spi_async() is wrong because
the message is likely to be in the queue and not transferred yet. This
can corrupt the message while it is being used by the controller driver.
spi_maybe_unoptimize_message() is already called in the correct place
in spi_finalize_current_message() to balance the call to
spi_maybe_optimize_message() in spi_async().
Fixes: 7b1d87af14d9 ("spi: add spi_optimize_message() APIs")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240708-spi-mux-fix-v1-1-6c8845193128@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Since commit c49cfa917025 ("USB: serial: use generic method if no
alternative is provided in usb serial layer"), USB serial core calls the
generic resume implementation when the driver has not provided one.
This can trigger a crash on resume with mos7840 since support for
multiple read URBs was added back in 2011. Specifically, both port read
URBs are now submitted on resume for open ports, but the context pointer
of the second URB is left set to the core rather than mos7840 port
structure.
Fix this by implementing dedicated suspend and resume functions for
mos7840.
Tested with Delock 87414 USB 2.0 to 4x serial adapter.
Signed-off-by: Dmitry Smirnov <d.smirnov@inbox.lv>
[ johan: analyse crash and rewrite commit message; set busy flag on
resume; drop bulk-in check; drop unnecessary usb_kill_urb() ]
Fixes: d83b405383c9 ("USB: serial: add support for multiple read urbs")
Cc: stable@vger.kernel.org # 3.3
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When SMP is enabled and spinlocks are actually functional then there is
a deadlock with the 'statelock' spinlock between ks8851_start_xmit_spi
and ks8851_irq:
watchdog: BUG: soft lockup - CPU#0 stuck for 27s!
call trace:
queued_spin_lock_slowpath+0x100/0x284
do_raw_spin_lock+0x34/0x44
ks8851_start_xmit_spi+0x30/0xb8
ks8851_start_xmit+0x14/0x20
netdev_start_xmit+0x40/0x6c
dev_hard_start_xmit+0x6c/0xbc
sch_direct_xmit+0xa4/0x22c
__qdisc_run+0x138/0x3fc
qdisc_run+0x24/0x3c
net_tx_action+0xf8/0x130
handle_softirqs+0x1ac/0x1f0
__do_softirq+0x14/0x20
____do_softirq+0x10/0x1c
call_on_irq_stack+0x3c/0x58
do_softirq_own_stack+0x1c/0x28
__irq_exit_rcu+0x54/0x9c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x50
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x64/0x68
__netif_schedule+0x6c/0x80
netif_tx_wake_queue+0x38/0x48
ks8851_irq+0xb8/0x2c8
irq_thread_fn+0x2c/0x74
irq_thread+0x10c/0x1b0
kthread+0xc8/0xd8
ret_from_fork+0x10/0x20
This issue has not been identified earlier because tests were done on
a device with SMP disabled and so spinlocks were actually NOPs.
Now use spin_(un)lock_bh for TX queue related locking to avoid execution
of softirq work synchronously that would lead to a deadlock.
Fixes: 3dc5d4454545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240706101337.854474-1-rwahl@gmx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
rvu_check_rsrc_availability()
In rvu_check_rsrc_availability() in case of invalid SSOW req, an incorrect
data is printed to error log. 'req->sso' value is printed instead of
'req->ssow'. Looks like "copy-paste" mistake.
Fix this mistake by replacing 'req->sso' with 'req->ssow'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 746ea74241fa ("octeontx2-af: Add RVU block LF provisioning support")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240705095317.12640-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
