| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a /proc/interrupts formatting regression
- Have the BCM2836 interrupt controller enter power management states
properly
- Other fixlets
* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
genirq/proc: Add missing space separator back
irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v3: Fix irq_complete_ack() comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Have the Automatic IBRS setting check on AMD does not falsely fire in
the guest when it has been set already on the host
- Make sure cacheinfo structures memory is allocated to address a boot
NULL ptr dereference on Intel Meteor Lake which has different numbers
of subleafs in its CPUID(4) leaf
- Take care of the GDT restoring on the kexec path too, as expected by
the kernel
- Make sure SMP is not disabled when IO-APIC is disabled on the kernel
cmdline
- Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to
propagate changes to the kernelmode page tables, to the user portion,
in PTI
- Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups
can get lost and thus user-visible delays happen
- Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU
write of 0 (WRPKRU) which will mark PKRU in its init state and thus
lose the actual buffer
* tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails
x86/cacheinfo: Delete global num_cache_leaves
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
x86/kexec: Restore GDT on return from ::preserve_context kexec
x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC
x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables
x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation
x86/pkeys: Ensure updated PKRU value is XRSTOR'd
x86/pkeys: Change caller of update_pkru_in_sigframe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
- CPU hotplug ordering fixes
- Add missing MODULE_DESCRIPTION for rnull
- bcache error value fix
- virtio-blk queue freeze fix
* tag 'block-6.13-20241207' of git://git.kernel.dk/linux:
blk-mq: move cpuhp callback registering out of q->sysfs_lock
blk-mq: register cpuhp callback after hctx is added to xarray table
virtio-blk: don't keep queue frozen during system suspend
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
nvme-pci: remove two deallocate zeroes quirks
block: rnull: add missing MODULE_DESCRIPTION
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
|
|
Pull more drm fixes from Simona Vetter:
"Due to mailing list unreliability we missed the amdgpu pull, hence
part two with that now included:
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
fixes
- amdkfd fixes"
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.13-2024-12-04:
amdgpu:
- Jpeg work handler fix for VCN 1.0
- HDP flush fixes
- ACPI EDID sanity check
- OLED panel backlight fix
- DC YCbCr fix
- DC Detile buffer size debugging
- DC prefetch calculation fix
- DC VTotal handling fix
- DC HBlank fix
- ISP fix
- SR-IOV fix
- Workload profile fixes
- DCN 4.0.1 resume fix
amdkfd:
- GC 12.x fix
- GC 9.4.x fix
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206190452.2571042-1-alexander.deucher@amd.com
|
|
Pull drm fixes from Dave Airlie:
"Pretty quiet week which is probably expected after US holidays, the
dma-fence and displayport MST message handling fixes make up the bulk
of this, along with a couple of minor xe and other driver fixes.
dma-fence:
- Fix reference leak on fence-merge failure path
- Simplify fence merging with kernel's sort()
- Fix dma_fence_array_signaled() to ensure forward progress
dp_mst:
- Fix MST sideband message body length check
- Fix a bunch of locking/state handling with DP MST msgs
sti:
- Add __iomem for mixer_dbg_mxn()'s parameter
xe:
- Missing init value and 64-bit write-order check
- Fix a memory allocation issue causing lockdep violation
v3d:
- Performance counter fix"
* tag 'drm-fixes-2024-12-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/v3d: Enable Performance Counters before clearing them
drm/dp_mst: Use reset_msg_rx_state() instead of open coding it
drm/dp_mst: Reset message rx state after OOM in drm_dp_mst_handle_up_req()
drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req()
drm/dp_mst: Fix down request message timeout handling
drm/dp_mst: Simplify error path in drm_dp_mst_handle_down_rep()
drm/dp_mst: Verify request type in the corresponding down message reply
drm/dp_mst: Fix resetting msg rx state after topology removal
drm/xe: Move the coredump registration to the worker thread
drm/xe/guc: Fix missing init value and add register order check
drm/sti: Add __iomem for mixer_dbg_mxn's parameter
drm/dp_mst: Fix MST sideband message body length check
dma-buf: fix dma_fence_array_signaled v4
dma-fence: Use kernel's sort for merging fences
dma-fence: Fix reference leak on fence merge failure path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes, fixing an incorrect format specifier in a log
message and adding missing cleanup of the devres data used to support
dev_get_regmap() when a device is unregistered"
* tag 'regmap-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: detach regmap from dev on regmap_exit
regmap: Use correct format specifier for logging range errors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small driver specific fixes and device ID updates for SPI.
The Apple change flags the driver as being compatible with the core's
GPIO chip select support, fixing support for some systems"
* tag 'spi-fix-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: Fix the IS_ERR() bug for devm_clk_get_optional_enabled()
spi: intel: Add Panther Lake SPI controller support
spi: apple: Set use_gpio_descriptors to true
spi: mpc52xx: Add cancel_work_sync before module remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Core:
- Further prevent card detect during shutdown
Host drivers:
- sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10
tablet"
* tag 'mmc-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Further prevent card detect during shutdown
mmc: sdhci-pci: Add DMI quirk for missing CD GPIO on Vexia Edu Atla 10 tablet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
"Core:
- Fix a couple of memory-leaks during genpd init/remove
Providers:
- imx: Adjust delay for gpcv2 to fix power up handshake
- mediatek: Fix DT bindings by adding another nested power-domain
layer"
* tag 'pmdomain-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: imx: gpcv2: Adjust delay after power up handshake
pmdomain: core: Fix error path in pm_genpd_init() when ida alloc fails
pmdomain: core: Add missing put_device()
dt-bindings: power: mediatek: Add another nested power-domain layer
|
|
Commit
5944ce092b97 ("arch_topology: Build cacheinfo from primary CPU")
adds functionality that architectures can use to optionally allocate and
build cacheinfo early during boot. Commit
6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
lets secondary CPUs correct (and reallocate memory) cacheinfo data if
needed.
If the early build functionality is not used and cacheinfo does not need
correction, memory for cacheinfo is never allocated. x86 does not use
the early build functionality. Consequently, during the cacheinfo CPU
hotplug callback, last_level_cache_is_valid() attempts to dereference
a NULL pointer:
BUG: kernel NULL pointer dereference, address: 0000000000000100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEPMT SMP NOPTI
CPU: 0 PID 19 Comm: cpuhp/0 Not tainted 6.4.0-rc2 #1
RIP: 0010: last_level_cache_is_valid+0x95/0xe0a
Allocate memory for cacheinfo during the cacheinfo CPU hotplug callback
if not done earlier.
Moreover, before determining the validity of the last-level cache info,
ensure that it has been allocated. Simply checking for non-zero
cache_leaves() is not sufficient, as some architectures (e.g., Intel
processors) have non-zero cache_leaves() before allocation.
Dereferencing NULL cacheinfo can occur in update_per_cpu_data_slice_size().
This function iterates over all online CPUs. However, a CPU may have come
online recently, but its cacheinfo may not have been allocated yet.
While here, remove an unnecessary indentation in allocate_cache_info().
[ bp: Massage. ]
Fixes: 6539cffa9495 ("cacheinfo: Add arch specific early level initializer")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Andreas Herrmann <aherrmann@suse.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org # 6.3+
Link: https://lore.kernel.org/r/20241128002247.26726-2-ricardo.neri-calderon@linux.intel.com
|
|
In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1. The input clamp value h[] is of type s32. The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h. The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer. The size of an unsigned long
integer differs between 32-bit and 64-bit architectures. Converting this
to type s32 may lead to undesired behavior.
Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.
To solve those two issues, declare a signed integer with a value of
BIT(13).
There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here. Self-assign it to h[i] to make use of the
clamp macro.
Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.
Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b501030 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411230458.dhZwh3TT-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202411282222.oF0B4110-lkp@intel.com/
Reviewed-by: David Laight <david.laight@aculab.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"One bug fix and some documentation updates:
- Correct typos in comments
- Elaborate a comment about how the uAPI works for
IOMMU_HW_INFO_TYPE_ARM_SMMUV3
- Fix a double free on error path and add test coverage for the bug"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3
iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth
iommufd: Fix out_fput in iommufd_fault_alloc()
iommufd: Fix typos in kernel-doc comments
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes v6.13-rc2:
- v3d performance counter fix.
- A lot of DP-MST related fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2ce1650d-801f-4265-a876-5a8743f1c82b@linux.intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Missing init value and 64-bit write-order check (Zhanjung)
- Fix a memory allocation issue causing lockdep violation (John)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z1BidZBFQOLjz__J@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can and netfilter.
Current release - regressions:
- rtnetlink: fix double call of rtnl_link_get_net_ifla()
- tcp: populate XPS related fields of timewait sockets
- ethtool: fix access to uninitialized fields in set RXNFC command
- selinux: use sk_to_full_sk() in selinux_ip_output()
Current release - new code bugs:
- net: make napi_hash_lock irq safe
- eth:
- bnxt_en: support header page pool in queue API
- ice: fix NULL pointer dereference in switchdev
Previous releases - regressions:
- core: fix icmp host relookup triggering ip_rt_bug
- ipv6:
- avoid possible NULL deref in modify_prefix_route()
- release expired exception dst cached in socket
- smc: fix LGR and link use-after-free issue
- hsr: avoid potential out-of-bound access in fill_frame_info()
- can: hi311x: fix potential use-after-free
- eth: ice: fix VLAN pruning in switchdev mode
Previous releases - always broken:
- netfilter:
- ipset: hold module reference while requesting a module
- nft_inner: incorrect percpu area handling under softirq
- can: j1939: fix skb reference counting
- eth:
- mlxsw: use correct key block on Spectrum-4
- mlx5: fix memory leak in mlx5hws_definer_calc_layout"
* tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
net :mana :Request a V2 response version for MANA_QUERY_GF_STAT
net: avoid potential UAF in default_operstate()
vsock/test: verify socket options after setting them
vsock/test: fix parameter types in SO_VM_SOCKETS_* calls
vsock/test: fix failures due to wrong SO_RCVLOWAT parameter
net/mlx5e: Remove workaround to avoid syndrome for internal port
net/mlx5e: SD, Use correct mdev to build channel param
net/mlx5: E-Switch, Fix switching to switchdev mode in MPV
net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled
net/mlx5: HWS: Properly set bwc queue locks lock classes
net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout
bnxt_en: handle tpa_info in queue API implementation
bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap()
bnxt_en: refactor tpa_info alloc/free into helpers
geneve: do not assume mac header is set in geneve_xmit_skb()
mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4
ethtool: Fix wrong mod state in case of verbose and no_mask bitset
ipmr: tune the ipmr_can_free_table() checks.
netfilter: nft_set_hash: skip duplicated elements pending gc run
netfilter: ipset: Hold module reference while requesting a module
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix in suspend/resume for i2c-hid (Kenny Levinsen)
- fix wacom driver assuming a name can not be null (WangYuli)
- a couple of constify changes/fixes (Thomas Weißschuh)
- a couple of selftests/hid fixes (Maximilian Heyne & Benjamin
Tissoires)
* tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: fix kfunc inclusions with newer bpftool
HID: bpf: drop unneeded casts discarding const
HID: bpf: constify hid_ops
selftests: hid: fix typo and exit code
HID: wacom: fix when get product name maybe null pointer
HID: i2c-hid: Revert to using power commands to wake on resume
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
|
|
Pull NVMe fixess from Keith:
"nvme fixes for Linux 6.13
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)"
* tag 'nvme-6.13-2024-12-05' of git://git.infradead.org/nvme:
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
nvme-pci: remove two deallocate zeroes quirks
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
|
|
Commit 4ce6e2db00de ("virtio-blk: Ensure no requests in virtqueues before
deleting vqs.") replaces queue quiesce with queue freeze in virtio-blk's
PM callbacks. And the motivation is to drain inflight IOs before suspending.
block layer's queue freeze looks very handy, but it is also easy to cause
deadlock, such as, any attempt to call into bio_queue_enter() may run into
deadlock if the queue is frozen in current context. There are all kinds
of ->suspend() called in suspend context, so keeping queue frozen in the
whole suspend context isn't one good idea. And Marek reported lockdep
warning[1] caused by virtio-blk's freeze queue in virtblk_freeze().
[1] https://lore.kernel.org/linux-block/ca16370e-d646-4eee-b9cc-87277c89c43c@samsung.com/
Given the motivation is to drain in-flight IOs, it can be done by calling
freeze & unfreeze, meantime restore to previous behavior by keeping queue
quiesced during suspend.
Cc: Yi Sun <yi.sun@unisoc.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: virtualization@lists.linux.dev
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20241112125821.1475793-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As per the guidelines, new drivers may not be set to default on.
An expert user can always select it.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Sami Mujawar <sami.mujawar@arm.com>
Link: https://lore.kernel.org/r/6750c695194cd_2508129427@dwillia2-xfh.jf.intel.com.notmuch
Link: https://lore.kernel.org/r/20241205143634.306114-1-suzuki.poulose@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Use reset_msg_rx_state() in drm_dp_mst_handle_up_req() instead of
open-coding it.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-8-imre.deak@intel.com
|
|
After an out-of-memory error the reception state should be reset, so
that the next attempt receiving a message doesn't fail (due to getting a
start-of-message packet, while the reception state has already the
start-of-message flag set).
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-7-imre.deak@intel.com
|
|
While receiving an MST up request message from one thread in
drm_dp_mst_handle_up_req(), the MST topology could be removed from
another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing
mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL.
This could lead to a NULL deref/use-after-free of mst_primary in
drm_dp_mst_handle_up_req().
Avoid the above by holding a reference for mst_primary in
drm_dp_mst_handle_up_req() while it's used.
v2: Fix kfreeing the request if getting an mst_primary reference fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204132007.3132494-1-imre.deak@intel.com
|
|
If receiving a reply for an MST down request message times out, the
thread receiving the reply in drm_dp_mst_handle_down_rep() could try to
dereference the drm_dp_sideband_msg_tx txmsg request message after the
thread waiting for the reply - calling drm_dp_mst_wait_tx_reply() - has
timed out and freed txmsg, hence leading to a use-after-free in
drm_dp_mst_handle_down_rep().
Prevent the above by holding the drm_dp_mst_topology_mgr::qlock in
drm_dp_mst_handle_down_rep() for the whole duration txmsg is looked up
from the request list and dereferenced.
v2: Fix unlocking mgr->qlock after verify_rx_request_type() fails.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203174632.2941402-1-imre.deak@intel.com
|
|
Simplify the error return path in drm_dp_mst_handle_down_rep(),
preparing for the next patch.
While at it use reset_msg_rx_state() instead of open-coding it.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-4-imre.deak@intel.com
|
|
After receiving the response for an MST down request message, the
response should be accepted/parsed only if the response type matches
that of the request. Ensure this by checking if the request type code
stored both in the request and the reply match, dropping the reply in
case of a mismatch.
This fixes the topology detection for an MST hub, as described in the
Closes link below, where the hub sends an incorrect reply message after
a CLEAR_PAYLOAD_TABLE -> LINK_ADDRESS down request message sequence.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12804
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-3-imre.deak@intel.com
|
|
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bbf3 ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
|
|
The devm_clk_get_optional_enabled() function returns error
pointers(PTR_ERR()). So use IS_ERR() to check it.
Verified on K3-J7200 EVM board, without clock node mentioned
in the device tree.
Signed-off-by: Purushothama Siddaiah <psiddaiah@mvista.com>
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Link: https://patch.msgid.link/20241205070426.1861048-1-psiddaiah@mvista.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
HiSilicon HIP09A platforms using the same SMMU PMCG with HIP09
and thus suffers the same erratum. List them in the PMCG platform
information list without introducing a new SMMU PMCG Model.
Update the silicon-errata.rst as well.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Link: https://lore.kernel.org/r/20241205013331.1484017-1-xiaqinxin@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The current requested response version(V1) for MANA_QUERY_GF_STAT query
results in STATISTICS_FLAGS_TX_ERRORS_GDMA_ERROR value being set to
0 always.
In order to get the correct value for this counter we request the response
version to be V2.
Cc: stable@vger.kernel.org
Fixes: e1df5202e879 ("net :mana :Add remaining GDMA stats for MANA to ethtool")
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1733291300-12593-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-12-03 (ice, idpf, ixgbe, ixgbevf, igb)
This series contains updates to ice, idpf, ixgbe, ixgbevf, and igb
drivers.
For ice:
Arkadiusz corrects search for determining whether PHY clock recovery is
supported on the device.
Przemyslaw corrects mask used for PHY timestamps on ETH56G devices.
Wojciech adds missing virtchnl ops which caused NULL pointer
dereference.
Marcin fixes VLAN filter settings for uplink VSI in switchdev mode.
For idpf:
Josh restores setting of completion tag for empty buffers.
For ixgbevf:
Jake removes incorrect initialization/support of IPSEC for mailbox
version 1.5.
For ixgbe:
Jake rewords and downgrades misleading message when negotiation
of VF mailbox version is not supported.
Tore Amundsen corrects value for BASE-BX10 capability.
For igb:
Yuan Can adds proper teardown on failed pci_register_driver() call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Fix potential invalid memory access in igb_init_module()
ixgbe: Correct BASE-BX10 compliance code
ixgbe: downgrade logging of unsupported VF API version to debug
ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5
idpf: set completion tag for "empty" bufs associated with a packet
ice: Fix VLAN pruning in switchdev mode
ice: Fix NULL pointer dereference in switchdev
ice: fix PHY timestamp extraction for ETH56G
ice: fix PHY Clock Recovery availability check
====================
Link: https://patch.msgid.link/20241203215521.1646668-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously a workaround was added to avoid syndrome 0xcdb051. It is
triggered when offload a rule with tunnel encapsulation, and
forwarding to another table, but not matching on the internal port in
firmware steering mode. The original workaround skips internal tunnel
port logic, which is not correct as not all cases are considered. As
an example, if vlan is configured on the uplink port, traffic can't
pass because vlan header is not added with this workaround. Besides,
there is no such issue for software steering. So, this patch removes
that, and returns error directly if trying to offload such rule for
firmware steering.
Fixes: 06b4eac9c4be ("net/mlx5e: Don't offload internal port if filter device is out device")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Tested-by: Frode Nordahl <frode.nordahl@canonical.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In a multi-PF netdev, each traffic channel creates its own resources
against a specific PF.
In the cited commit, where this support was added, the channel_param
logic was mistakenly kept unchanged, so it always used the primary PF
which is found at priv->mdev.
In this patch we fix this by moving the logic to be per-channel, and
passing the correct mdev instance.
This bug happened to be usually harmless, as the resulting cparam
structures would be the same for all channels, due to identical FW logic
and decisions.
However, in some use cases, like fwreset, this gets broken.
This could lead to different symptoms. Example:
Error cqe on cqn 0x428, ci 0x0, qn 0x10a9, opcode 0xe, syndrome 0x4,
vendor syndrome 0x32
Fixes: e4f9686bdee7 ("net/mlx5e: Let channels be SD-aware")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the mentioned commit change for MPV mode, since in MPV mode the IB
device is shared between different core devices, so under this change
when moving both devices simultaneously to switchdev mode the IB device
removal and re-addition can race with itself causing unexpected behavior.
In such case do rescan_drivers() only once in order to add the ethernet
representor auxiliary device, and skip adding and removing IB devices.
Fixes: ab85ebf43723 ("net/mlx5: E-switch, refactor eswitch mode change")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case that IB device is already disabled when moving to switchdev mode,
which can happen when working with LAG, need to do rescan_drivers()
before leaving in order to add ethernet representor auxiliary device.
Fixes: ab85ebf43723 ("net/mlx5: E-switch, refactor eswitch mode change")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mentioned "Fixes" patch forgot to do that.
Fixes: 9addffa34359 ("net/mlx5: HWS, use lock classes for bwc locks")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It allocates a match template, which creates a compressed definer fc
struct, but that is not deallocated.
This commit fixes that.
Fixes: 74a778b4a63f ("net/mlx5: HWS, added definers handling")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241203204920.232744-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 7ed816be35ab ("eth: bnxt: use page pool for head frags") added a
page pool for header frags, which may be distinct from the existing pool
for the aggregation ring. Prior to this change, frags used in the TPA
ring rx_tpa were allocated from system memory e.g. napi_alloc_frag()
meaning their lifetimes were not associated with a page pool. They can
be returned at any time and so the queue API did not alloc or free
rx_tpa.
But now frags come from a separate head_pool which may be different to
page_pool. Without allocating and freeing rx_tpa, frags allocated from
the old head_pool may be returned to a different new head_pool which
causes a mismatch between the pp hold/release count.
Fix this problem by properly freeing and allocating rx_tpa in the queue
API implementation.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap() for
allocating rx_agg_bmap.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor bnxt_rx_ring_info->tpa_info operations into helpers that work
on a single tpa_info in prep for queue API using them.
There are 2 pairs of operations:
* bnxt_alloc_one_tpa_info()
* bnxt_free_one_tpa_info()
These alloc/free the tpa_info array itself.
* bnxt_alloc_one_tpa_info_data()
* bnxt_free_one_tpa_info_data()
These alloc/free the frags stored in tpa_info array.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20241204041022.56512-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should not assume mac header is set in output path.
Use skb_eth_hdr() instead of eth_hdr() to fix the issue.
sysbot reported the following :
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 skb_mac_header include/linux/skbuff.h:3052 [inline]
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 eth_hdr include/linux/if_ether.h:24 [inline]
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit_skb drivers/net/geneve.c:898 [inline]
WARNING: CPU: 0 PID: 11635 at include/linux/skbuff.h:3052 geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039
Modules linked in:
CPU: 0 UID: 0 PID: 11635 Comm: syz.4.1423 Not tainted 6.12.0-syzkaller-10296-gaaf20f870da0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_mac_header include/linux/skbuff.h:3052 [inline]
RIP: 0010:eth_hdr include/linux/if_ether.h:24 [inline]
RIP: 0010:geneve_xmit_skb drivers/net/geneve.c:898 [inline]
RIP: 0010:geneve_xmit+0x4c38/0x5730 drivers/net/geneve.c:1039
Code: 21 c6 02 e9 35 d4 ff ff e8 a5 48 4c fb 90 0f 0b 90 e9 fd f5 ff ff e8 97 48 4c fb 90 0f 0b 90 e9 d8 f5 ff ff e8 89 48 4c fb 90 <0f> 0b 90 e9 41 e4 ff ff e8 7b 48 4c fb 90 0f 0b 90 e9 cd e7 ff ff
RSP: 0018:ffffc90003b2f870 EFLAGS: 00010283
RAX: 000000000000037a RBX: 000000000000ffff RCX: ffffc9000dc3d000
RDX: 0000000000080000 RSI: ffffffff86428417 RDI: 0000000000000003
RBP: ffffc90003b2f9f0 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff88806603c000
R13: 0000000000000000 R14: ffff8880685b2780 R15: 0000000000000e23
FS: 00007fdc2deed6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30a1dff8 CR3: 0000000056b8c000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
__dev_direct_xmit+0x58a/0x720 net/core/dev.c:4490
dev_direct_xmit include/linux/netdevice.h:3181 [inline]
packet_xmit+0x1e4/0x360 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3146 [inline]
packet_sendmsg+0x2700/0x5660 net/packet/af_packet.c:3178
sock_sendmsg_nosec net/socket.c:711 [inline]
__sock_sendmsg net/socket.c:726 [inline]
__sys_sendto+0x488/0x4f0 net/socket.c:2197
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0xe0/0x1c0 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: a025fb5f49ad ("geneve: Allow configuration of DF behaviour")
Reported-by: syzbot+3ec5271486d7cb2d242a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/674f4b72.050a0220.17bd51.004a.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20241203182122.2725517-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver is currently using an ACL key block that is not supported by
Spectrum-4. This works because the driver is only using a single field
from this key block which is located in the same offset in the
equivalent Spectrum-4 key block.
The issue was discovered when the firmware started rejecting the use of
the unsupported key block. The change has been reverted to avoid
breaking users that only update their firmware.
Nonetheless, fix the issue by using the correct key block.
Fixes: 07ff135958dd ("mlxsw: Introduce flex key elements for Spectrum-4")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/35e72c97bdd3bc414fb8e4d747e5fb5d26c29658.1733237440.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-nb-wmi: Silence unknown event warning when charger is plugged in
- asus-wmi: Handle return code variations during thermal policy writing
graciously
- samsung-laptop: Correct module description
* tag 'platform-drivers-x86-v6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: Ignore unknown event 0xCF
platform/x86: asus-wmi: Ignore return value when writing thermal policy
platform/x86: samsung-laptop: Match MODULE_DESCRIPTION() to functionality
|
|
Since commit 771f712ba5b0 ("scsi: scsi_debug: Fix cmd duration
calculation"), ns_from_boot value is only evaluated in schedule_resp()
for polled requests.
However, ns_from_boot is also required for hrtimer support for when
ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to
decide when to evaluate ns_from_boot.
Fixes: 771f712ba5b0 ("scsi: scsi_debug: Fix cmd duration calculation")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
