| Age | Commit message (Collapse) | Author |
|---|
|
The mlxsw_sp_crif_alloc() function returns NULL on error. It doesn't
return error pointers. Fix the check.
Fixes: 78126cfd5dc9 ("mlxsw: spectrum_router: Maintain CRIF for fallback loopback RIF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These add support for new hardware (ap807 and AM62A7), fix several
issues in cpufreq drivers and in the operating performance points
(OPP) framework, fix up intel_idle after recent changes and add
documentation.
Specifics:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki)
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada)
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar)
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)
- Add support for TI's AM62A7 platform (Vibhore Vardhan)
- Add support for Armada's ap807 platform (Russell King (Oracle))
- Add support for StarFive JH7110 SoC (Mason Huo)
- Fix voltage selection for Mediatek Socs (Daniel Golle)
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier)
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)
- Simplify performance state related logic in the OPP core (Viresh
Kumar)
- Fix use-after-free and improve locking around lazy_opp_tables
(Viresh Kumar, Stephan Gerhold)
- Minor cleanups - using dev_err_probe() and rate-limiting debug
messages (Andrew Halaney, Adrián Larumbe)"
* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
OPP: Properly propagate error along when failing to get icc_path
OPP: Use dev_err_probe() when failing to get icc_path
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
OPP: Simplify the over-designed pstate <-> level dance
OPP: pstate is only valid for genpd OPP tables
OPP: don't drop performance constraint on OPP table removal
OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
OPP: Staticize `lazy_opp_tables` in of.c
cpufreq: dt-platdev: Support building as module
opp: Fix use-after-free in lazy_opp_tables after probe deferral
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
OPP: rate-limit debug messages when no change in OPP is required
cpufreq: imx6q: don't warn for disabling a non-existing frequency
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"Another set of clk driver updates and fixes for the merge window. The
driver updates needed more time to bake in linux-next.
Updates:
- Support for more clk controllers in Qualcomm SoCs such as SM8350,
SM8450, SDX75, SC8280XP, and IPQ9574
- Runtime PM enablement of some more Qualcomm clk controllers
- Various fixes to Qualcomm clk driver data to use correct clk_ops
and to check halt bits properly
- AT91 updates to modernize with clk_parent_data structures
Fixes:
- Remove 'syscon' from dt binding fix for ti,j721e-system-controller
- Fix determine rate in the Tegra driver that got wrecked by the
refactorting of muxes this merge window"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
clk: tegra: Avoid calling an uninitialized function
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
clk: at91: sama7g5: switch to parent_hw and parent_data
clk: at91: sckc: switch to parent_data/parent_hw
clk: at91: clk-sam9x60-pll: add support for parent_hw
clk: at91: clk-utmi: add support for parent_hw
clk: at91: clk-system: add support for parent_hw
clk: at91: clk-programmable: add support for parent_hw
clk: at91: clk-peripheral: add support for parent_hw
clk: at91: clk-master: add support for parent_hw
clk: at91: clk-generated: add support for parent_hw
clk: at91: clk-main: add support for parent_data/parent_hw
clk: qcom: gcc-sc8280xp: Add runtime PM
clk: qcom: gpucc-sc8280xp: Add runtime PM
clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
clk: qcom: gpucc-sm6375: Enable runtime pm
dt-bindings: clock: sm6375-gpucc: Add VDD_GX
clk: qcom: gcc-sm6115: Add missing PLL config properties
clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This consist of three parts; UAPI update, OHCI driver update, and
several bug fixes.
Firstly, the 1394 OHCI specification defines method to retrieve
hardware time stamps for asynchronous communication, which was
previously unavailable in user space. This adds new events to the
UAPI, allowing applications to retrieve the time when asynchronous
packet are received and sent. The new events are tested in the
bleeding edge of libhinawa and look to work well. The new version of
libhinawa will be released after current merge window is closed:
https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/
Secondly, the FireWire stack includes a PCM device driver for 1394
OHCI hardware, This change modernizes the driver by managed resource
(devres) framework.
Lastly, bug fixes for firewire-net and firewire-core"
* tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (25 commits)
firewire: net: fix use after free in fwnet_finish_incoming_packet()
firewire: core: obsolete usage of GFP_ATOMIC at building node tree
firewire: ohci: release buffer for AR req/resp contexts when managed resource is released
firewire: ohci: use devres for content of configuration ROM
firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts
firewire: ohci: use devres for list of isochronous contexts
firewire: ohci: use devres for requested IRQ
firewire: ohci: use devres for misc DMA buffer
firewire: ohci: use devres for MMIO region mapping
firewire: ohci: use devres for PCI-related resources
firewire: ohci: use devres for memory object of ohci structure
firewire: fix warnings to generate UAPI documentation
firewire: fix build failure due to missing module license
firewire: cdev: implement new event relevant to phy packet with time stamp
firewire: cdev: add new event to notify phy packet with time stamp
firewire: cdev: code refactoring to dispatch event for phy packet
firewire: cdev: implement new event to notify response subaction with time stamp
firewire: cdev: add new event to notify response subaction with time stamp
firewire: cdev: code refactoring to operate event of response
firewire: core: implement variations to send request and wait for response with time stamp
...
|
|
Instead of doing two pass parsing of the table, replace
acpi_match_device_ids() with acpi_match_acpi_device().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are at least two places in the kernel that are using
the SMB0001 HID. Make it to be available via acpi_drivers.h
header file. While at it, replace hard coded one with a
definition.
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Link: https://lore.kernel.org/r/20230621151652.79579-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After switching i2c-scmi driver to be a platform one, it stopped
being enumerated on number of Kontron platforms, because it's
listed in the forbidden_id_list.
To resolve the situation, add a flag to driver data to allow devices
with no resources in _CRS to be enumerated via platform bus.
Fixes: 03d4287add6e ("i2c: scmi: Convert to be a platform driver")
Closes: https://lore.kernel.org/r/60c1756765b9a3f1eab0dcbd84f59f00fe1caf48.camel@kontron.com
Link: https://lore.kernel.org/r/20230621151652.79579-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
[ rjw: Move has_resource definition to the block in which it is used and
initialize it to 'false' ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Match the ACPI device against a given list of ACPI IDs.
Subsequent changes will make use of this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are two pieces of data being exported from drivers/acpi/scan.c
(acpi_device_lock and acpi_wakeup_device_list) that don't have their
definitions declared in anything scan.c is including.
Fix the following sparse warnings by including sleep.h to add the
declarations of acpi_device_lock and acpi_wakeup_device_list to
fix the followng sparse warnings:
drivers/acpi/scan.c:42:1: warning: symbol 'acpi_device_lock' was not declared. Should it be static?
drivers/acpi/scan.c:43:1: warning: symbol 'acpi_wakeup_device_list' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge CPU power management updates for 6.5-rc1:
- Add missing __init annotation to one function in the intel_idle
drvier (Rafael Wysocki).
- Make intel_pstate use a correct scaling factor when mapping HWP
performance levels to frequency values on hybrid-capable systems
with disabled E-cores (Srinivas Pandruvada).
- Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
Kumar).
- Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang).
- Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar).
- Add support for TI's AM62A7 platform (Vibhore Vardhan).
- Add support for Armada's ap807 platform (Russell King (Oracle)).
- Add support for StarFive JH7110 SoC (Mason Huo).
- Fix voltage selection for Mediatek Socs (Daniel Golle).
- Fix error handling in Tegra's cpufreq driver (Christophe JAILLET).
- Document Qualcomm's IPQ8074 in DT bindings (Robert Marko).
- Don't warn for disabling a non-existing frequency for imx6q cpufreq
driver (Christoph Niedermaier).
- Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney).
* pm-cpufreq:
cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
cpufreq: mediatek: correct voltages for MT7622 and MT7623
cpufreq: armada-8k: add ap807 support
cpufreq: dt-platdev: Support building as module
dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
cpufreq: ti-cpufreq: Add support for AM62A7
cpufreq: imx6q: don't warn for disabling a non-existing frequency
cpufreq: sparc: Don't allocate cpufreq_driver dynamically
cpufreq: tegra194: Fix an error handling path in tegra194_cpufreq_probe()
cpufreq: dt-platdev: Add JH7110 SOC to the allowlist
* pm-cpuidle:
intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
|
|
Commit 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
replaced clk_super_round_rate() by clk_super_determine_rate(), but
didn't update one callsite that was explicitly calling the old
tegra_clk_super_ops.round_rate() function, which was now NULL. This
resulted in a crash on Tegra30 systems during early boot.
Switch this callsite over to the clk_super_determine_rate() equivalent
to avoid the crash.
Fixes: 493ffb046cf5 ("clk: tegra: super: Switch to determine_rate")
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230630130748.840729-1-thierry.reding@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Update my email address to a working one, as the openwrt.org one is
broken since ages.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20230630202257.8449-2-jonas.gorski@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of modifying the device info on the fly, use static const mock
device info.
It's not okay to modify device info at runtime; we've added separate
runtime info for info that needs to be modified at runtime. We've added
safeguards to device info to prevent it from being modified, but commit
5e352e32aec2 ("drm/i915: preparation for using PAT index") just cast the
const away and modified it anyway. This prevents device info from being
moved to rodata.
Fixes: 5e352e32aec2 ("drm/i915: preparation for using PAT index")
Suggested-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0db62045a96a3fd4cf123685da88cc777f9b485.1687878757.git.jani.nikula@intel.com
(cherry picked from commit ecc7a3ce078a209a62af4c53ffb7370620f65c24)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
The multiplication got replaced by an addition in some cleanup.
This means we never write the correct data to some of the BDW
PSR data registers and thus we fail to actually wake up the
panel from PSR.
Fixes: 4ab4fa103217 ("drm/i915/psr: Make PSR registers relative to transcoders")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609141404.12729-3-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 460dc4ba1442b3e5e543328d11db2702b98d3d7c)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
This reverts commit 456be42aa713e7f83b467db66ceae779431c7d9d.
The assumption VMEM_MAX_PHYS should match ident_map_size
is wrong. At least discontiguous saved segments (DCSS)
could be loaded at addresses beyond ident_map_size and
dcssblk device driver might fail as result.
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Pull more block updates from Jens Axboe:
"Mostly items that came in a bit late for the initial pull request,
wanted to make sure they had the appropriate amount of linux-next soak
before going upstream.
Outside of stragglers, just generic fixes for either merge window
items, or longer standing bugs"
* tag 'block-6.5-2023-07-03' of git://git.kernel.dk/linux: (25 commits)
md/raid0: add discard support for the 'original' layout
nvme: disable controller on reset state failure
nvme: sync timeout work on failed reset
nvme: ensure unquiesce on teardown
cdrom/gdrom: Fix build error
nvme: improved uring polling
block: add request polling helper
nvme-mpath: fix I/O failure with EAGAIN when failing over I/O
nvme: host: fix command name spelling
blk-sysfs: add a new attr_group for blk_mq
blk-iocost: move wbt_enable/disable_default() out of spinlock
blk-wbt: cleanup rwb_enabled() and wbt_disabled()
blk-wbt: remove dead code to handle wbt enable/disable with io inflight
blk-wbt: don't create wbt sysfs entry if CONFIG_BLK_WBT is disabled
blk-mq: fix two misuses on RQF_USE_SCHED
blk-throttle: Fix io statistics for cgroup v1
bcache: Fix bcache device claiming
bcache: Alloc holder object before async registration
raid10: avoid spin_lock from fastpath from raid10_unplug()
md: fix 'delete_mutex' deadlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- fix build warning with W=1
- drop error handling for debugfs
* tag 'hsi-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_port: Drop error checking for debugfs_create_dir
HSI: fix ssi_waketest() declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- Add new Qualcomm PMI8998/PM660 SMB2 charger
- bq256xx: support systems without thermistors
- cros_pchg: fix peripheral device status after system resume
- axp20x_usb_power: add support for AXP192
- qcom-pon: add support for pm8941
- at91-reset: prepare to expose reset reason to sysfs
- switch all I2C drivers back to use .probe instead of .probe_new
- convert some more DT bindings to YAML
- misc cleanups
* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
power: reset: at91-reset: change the power on reason prototype
power: reset: qcom-pon: add support for pm8941-pon
dt-bindings: power: reset: qcom-pon: define pm8941-pon
power: supply: add Qualcomm PMI8998 SMB2 Charger driver
dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
power: supply: rt9467: Make charger-enable control as logic level
power: supply: Switch i2c drivers back to use .probe()
power: reset: add HAS_IOPORT dependencies
dt-bindings: power: supply: axp20x: Add AXP192 compatible
power: supply: axp20x_usb_power: Add support for AXP192
power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
power: supply: axp20x_usb_power: Simplify USB current limit handling
power: supply: hwmon: constify pointers to hwmon_channel_info
power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"The bulk of these patches relates to the moving to a void-returning
remove callback.
The i.MX HiFi remoteproc driver gets its pm_ops helpers updated to
resolve build warnings about 'defined but not used' variables in
certain configurations.
The ST STM32 remoteproc driver is extended to allow using a SCMI reset
controller to hold boot, and has an error message corrected.
The Qualcomm Q6V5 PAS driver gains a missing 'static' qualifier on
adsp_segment_dump()"
* tag 'rproc-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: qcom_q6v5_pas: staticize adsp_segment_dump()
remoteproc: stm32: Fix error code in stm32_rproc_parse_dt()
remoteproc: stm32: Allow hold boot management by the SCMI reset controller
dt-bindings: remoteproc: st,stm32-rproc: Rework reset declarations
remoteproc: imx_dsp_rproc: use modern pm_ops
remoteproc: wkup_m3: Convert to platform remove callback returning void
remoteproc: stm32: Convert to platform remove callback returning void
remoteproc: st: Convert to platform remove callback returning void
remoteproc: virtio: Convert to platform remove callback returning void
remoteproc: rcar: Convert to platform remove callback returning void
remoteproc: qcom_wcnss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_wcss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_pas: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_mss: Convert to platform remove callback returning void
remoteproc: qcom_q6v5_adsp: Convert to platform remove callback returning void
remoteproc: pru: Convert to platform remove callback returning void
remoteproc: omap: Convert to platform remove callback returning void
remoteproc: mtk_scp: Convert to platform remove callback returning void
remoteproc: meson_mx_ao_arc: Convert to platform remove callback returning void
remoteproc: keystone: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull hwspinlock update from Bjorn Andersson:
"This drops the last of_match_ptr() from the hwspinlock drivers,
solving the resulting 'defined but not used' warning/error"
* tag 'hwlock-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
hwspinlock: omap: drop of_match_ptr for ID table
|
|
Pull virtio updates from Michael Tsirkin:
- resume support in vdpa/solidrun
- structure size optimizations in virtio_pci
- new pds_vdpa driver
- immediate initialization mechanism for vdpa/ifcvf
- interrupt bypass for vdpa/mlx5
- multiple worker support for vhost
- viirtio net in Intel F2000X-PL support for vdpa/ifcvf
- fixes, cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
vhost: Make parameter name match of vhost_get_vq_desc()
vduse: fix NULL pointer dereference
vhost: Allow worker switching while work is queueing
vhost_scsi: add support for worker ioctls
vhost: allow userspace to create workers
vhost: replace single worker pointer with xarray
vhost: add helper to parse userspace vring state/file
vhost: remove vhost_work_queue
vhost_scsi: flush IO vqs then send TMF rsp
vhost_scsi: convert to vhost_vq_work_queue
vhost_scsi: make SCSI cmd completion per vq
vhost_sock: convert to vhost_vq_work_queue
vhost: convert poll work to be vq based
vhost: take worker or vq for flushing
vhost: take worker or vq instead of dev for queueing
vhost, vhost_net: add helper to check if vq has work
vhost: add vhost_worker pointer to vhost_virtqueue
vhost: dynamically allocate vhost_worker
vhost: create worker at end of vhost_dev_set_owner
virtio_bt: call scheduler when we free unused buffs
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of hugepage splitting in the
stage-2 fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact
with services that live in the Secure world. pKVM intervenes on
FF-A calls to guarantee the host doesn't misuse memory donated to
the hyp or a pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set
configuration from userspace, but the intent is to relax this
limitation and allow userspace to select a feature set consistent
with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the
hypervisor when running in protected mode, as the host is untrusted
at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization
Traps (FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has
broken hardware A/D state management.
RISC-V:
- Redirect AMO load/store misaligned traps to KVM guest
- Trap-n-emulate AIA in-kernel irqchip for KVM guest
- Svnapot support for KVM Guest
s390:
- New uvdevice secret API
- CMM selftest and fixes
- fix racy access to target CPU for diag 9c
x86:
- Fix missing/incorrect #GP checks on ENCLS
- Use standard mmu_notifier hooks for handling APIC access page
- Drop now unnecessary TR/TSS load after VM-Exit on AMD
- Print more descriptive information about the status of SEV and
SEV-ES during module load
- Add a test for splitting and reconstituting hugepages during and
after dirty logging
- Add support for CPU pinning in demand paging test
- Add support for AMD PerfMonV2, with a variety of cleanups and minor
fixes included along the way
- Add a "nx_huge_pages=never" option to effectively avoid creating NX
hugepage recovery threads (because nx_huge_pages=off can be toggled
at runtime)
- Move handling of PAT out of MTRR code and dedup SVM+VMX code
- Fix output of PIC poll command emulation when there's an interrupt
- Add a maintainer's handbook to document KVM x86 processes,
preferred coding style, testing expectations, etc.
- Misc cleanups, fixes and comments
Generic:
- Miscellaneous bugfixes and cleanups
Selftests:
- Generate dependency files so that partial rebuilds work as
expected"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (153 commits)
Documentation/process: Add a maintainer handbook for KVM x86
Documentation/process: Add a label for the tip tree handbook's coding style
KVM: arm64: Fix misuse of KVM_ARM_VCPU_POWER_OFF bit index
RISC-V: KVM: Remove unneeded semicolon
RISC-V: KVM: Allow Svnapot extension for Guest/VM
riscv: kvm: define vcpu_sbi_ext_pmu in header
RISC-V: KVM: Expose IMSIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC
RISC-V: KVM: Expose APLIC registers as attributes of AIA irqchip
RISC-V: KVM: Add in-kernel emulation of AIA APLIC
RISC-V: KVM: Implement device interface for AIA irqchip
RISC-V: KVM: Skeletal in-kernel AIA irqchip support
RISC-V: KVM: Set kvm_riscv_aia_nr_hgei to zero
RISC-V: KVM: Add APLIC related defines
RISC-V: KVM: Add IMSIC related defines
RISC-V: KVM: Implement guest external interrupt line management
KVM: x86: Remove PRIx* definitions as they are solely for user space
s390/uv: Update query for secret-UVCs
s390/uv: replace scnprintf with sysfs_emit
s390/uvdevice: Add 'Lock Secret Store' UVC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1.
Included in here are:
- Lots of USB4/Thunderbolt additions and updates for new hardware
types and fixes as people are starting to get access to the
hardware in the wild
- new gadget controller driver, cdns2, added
- new typec drivers added
- xhci driver updates
- typec driver updates
- usbip driver fixes
- usb-serial driver updates and fixes
- lots of smaller USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits)
usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC
usb: host: xhci: Do not re-initialize the XHCI HC if being removed
usb: typec: nb7vpq904m: fix CONFIG_DRM dependency
usbip: usbip_host: Replace strlcpy with strscpy
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
USB: serial: option: add LARA-R6 01B PIDs
usb: ulpi: Make container_of() no-op in to_ulpi_dev()
usb: gadget: legacy: fix error return code in gfs_bind
usb: typec: fsa4480: add support for Audio Accessory Mode
usb: typec: fsa4480: rework mux & switch setup to handle more states
usb: typec: ucsi: call typec_set_mode on non-altmode partner change
USB: gadget: f_hid: make hidg_class a static const structure
USB: gadget: f_printer: make usb_gadget_class a static const structure
USB: mon: make mon_bin_class a static const structure
USB: gadget: udc: core: make udc_class a static const structure
USB: roles: make role_class a static const structure
dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt
dt-bindings: usb: Add StarFive JH7110 USB controller
dt-bindings: usb: dwc3: Add IPQ9574 compatible
usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"
...
|
|
supported
The .adjphase operation is an operation that is implemented only by certain
PHCs. The sysfs device attribute node for querying the maximum phase
adjustment supported should not be exposed on devices that do not support
.adjphase.
Fixes: c3b60ab7a4df ("ptp: Add .getmaxphase callback to ptp_clock_info")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/netdev/20230627162146.GA114473@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/CA+G9fYtKCZeAUTtwe69iK8Xcz1mOKQzwcy49wd+imZrfj6ifXA@mail.gmail.com/
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Message-ID: <20230627232139.213130-1-rrameshbabu@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty/serial driver updates for 6.5-rc1.
Included in here are:
- tty_audit code cleanups from Jiri
- more 8250 cleanups from Ilpo
- samsung_tty driver bugfixes
- 8250 lock port updates
- usual fsl_lpuart driver updates and fixes
- other small serial driver fixes and updates, full details in the
shortlog
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
tty_audit: make data of tty_audit_log() const
tty_audit: make tty pointers in exposed functions const
tty_audit: make icanon a bool
tty_audit: invert the condition in tty_audit_log()
tty_audit: use kzalloc() in tty_audit_buf_alloc()
tty_audit: use TASK_COMM_LEN for task comm
Revert "8250: add support for ASIX devices with a FIFO bug"
serial: atmel: don't enable IRQs prematurely
tty: serial: Add Nuvoton ma35d1 serial driver support
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
tty: serial: imx: fix rs485 rx after tx
selftests: tty: add selftest for tty timestamp updates
tty: tty_io: update timestamps on all device nodes
tty: fix hang on tty device with no_room set
serial: core: fix -EPROBE_DEFER handling in init
serial: 8250_omap: Use force_suspend and resume for system suspend
tty: serial: samsung_tty: Use abs() to simplify some code
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is a set of staging driver updates for 6.5-rc1. It's a small
update this merge window, nothing major at all, overall just under
1000 lines of code removed, not a huge churn.
Nothing major to highlight here either, just lots of small coding
style fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (62 commits)
staging: rtl8192e: Remove whitespace and blank lines
staging: rtl8192e: remove 5G related code
staging: rtl8192e: remove comparison to true
staging: rtl8192e: remove return statement from void function
staging: rtl8192e: convert else if sequence to switch
staging: rtl8192e: clean up brace coding style issues
staging: rtl8723bs: Fix blank line issues
staging: rtl8723bs: Fix block comment issue
staging: rtl8723bs: Fix indentation issues
staging: vchiq_arm: Remove extra struct vchiq_instance declaration
staging: rtl8192e: Rename variable InitialGainHandler
staging: rtl8192e: Rename variable LeisurePSLeave
staging: rtl8192e: Rename variable SetBWModeHandler
staging: rtl8192e: Rename variable SetWirelessMode
staging: rtl8192e: Rename RTLLIB_LINKED_SCANNING
staging: rtl8192e: Rename RTLLIB_LINKED to MAC80211_LINKED
staging: rtl8192e: Rename RTLLIB_NOLINK to MAC80211_NOLINK
staging: rtl8192e: Rename state to link_state
staging: rtl8192e: Rename rtllib_state to rtl_link_state
staging: rtl8192e: Remove unused enum led_ctl_mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are a small set of changes for 6.5-rc1 for some driver core
changes. Included in here are:
- device property cleanups to make it easier to write "agnostic"
drivers when regards to the firmware layer underneath them (DT vs.
ACPI)
- debugfs documentation updates
- devres additions
- sysfs documentation and changes to handle empty directory creation
logic better
- tiny kernfs optimizations
- other tiny changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Skip empty folders creation
sysfs: Improve readability by following the kernel coding style
drivers: fwnode: fix fwnode_irq_get[_byname]()
ata: ahci_platform: Make code agnostic to OF/ACPI
device property: Implement device_is_compatible()
ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
base/node: Use 'property' to identify an access parameter
driver core: device.h: add some missing kerneldocs
kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
isa: Remove unnecessary checks
MAINTAINERS: add entry for auxiliary bus
debugfs: Correct the 'debugfs_create_str' docs
serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
iio: adc: Use devm_krealloc_array
hwmon: pmbus: Use devm_krealloc_array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc updates from Greg KH:
"Here is the big set of char/misc and other driver subsystem updates
for 6.5-rc1.
Lots of different, tiny, stuff in here, from a range of smaller driver
subsystems, including pulls from some substems directly:
- IIO driver updates and additions
- W1 driver updates and fixes (and a new maintainer!)
- FPGA driver updates and fixes
- Counter driver updates
- Extcon driver updates
- Interconnect driver updates
- Coresight driver updates
- mfd tree tag merge needed for other updates on top of that, lots of
small driver updates as patches, including:
- static const updates for class structures
- nvmem driver updates
- pcmcia driver fix
- lots of other small driver updates and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (243 commits)
bsr: fix build problem with bsr_class static cleanup
comedi: make all 'class' structures const
char: xillybus: make xillybus_class a static const structure
xilinx_hwicap: make icap_class a static const structure
virtio_console: make port class a static const structure
ppdev: make ppdev_class a static const structure
char: misc: make misc_class a static const structure
/dev/mem: make mem_class a static const structure
char: lp: make lp_class a static const structure
dsp56k: make dsp56k_class a static const structure
bsr: make bsr_class a static const structure
oradax: make 'cl' a static const structure
hwtracing: hisi_ptt: Fix potential sleep in atomic context
hwtracing: hisi_ptt: Advertise PERF_PMU_CAP_NO_EXCLUDE for PTT PMU
hwtracing: hisi_ptt: Export available filters through sysfs
hwtracing: hisi_ptt: Add support for dynamically updating the filter list
hwtracing: hisi_ptt: Factor out filter allocation and release operation
samples: pfsm: add CC_CAN_LINK dependency
misc: fastrpc: check return value of devm_kasprintf()
coresight: dummy: Update type of mode parameter in dummy_{sink,source}_enable()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add lots of Device Tree bindings / support
- Turn off LED strings when display is blank
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous NULL checks
- Only obtain PWM information once and do it in .probe()
Fix-ups:
- Ensure locks are obtained and held when required"
* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: led_bl: Take led_access lock when required
video: backlight: lp855x: Get PWM for PWM mode during probe
dt-bindings: backlight: lp855x: Convert to YAML and modernize
dt-bindings: backlight: pwm: Make power-supply not required
backlight: pwm_bl: Remove unneeded checks for valid GPIOs
backlight: Switch i2c drivers back to use .probe()
backlight: lm3630a: Turn off both led strings when display is blank
dt-bindings: leds: backlight: ktz8866: Add reg property and update example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for TI TPS6594/TPS6593/LP8764 PMICs
- Add support for Samsung RT5033 Battery Charger
- Add support for Analog Devices MAX77540 and MAX77541 PMICs
New Device Support:
- Add support for SPI to Rockchip RK808 (and friends)
- Add support for AXP192 PMIC to X-Powers AXP20X
- Add support for AXP313a PMIC to X-Powers AXP20X
- Add support for RK806 to Rockchip RK8XX
Removed Device Support:
- Removed MFD support for Richtek RT5033 Battery
Fix-ups:
- Remove superfluous code
- Switch I2C drivers from .probe_new() to .probe()
- Convert over to managed resources (devm_*(), etc)
- Use dev_err_probe() for returning errors from .probe()
- Add lots of Device Tree bindings / support
- Improve cache efficiency by switching to Maple
- Use own exported namespaces (NS)
- Include missing and remove superfluous headers
- Start using / convert to the new shutdown sys-off API
- Trivial: variable / define renaming
- Make use of of_property_read_reg() when requesting DT 'reg's
Bug Fixes:
- Fix chip revision readout due to incorrect data masking
- Amend incorrect register and mask values used for charger state
- Hide unused functionality at compile time
- Fix resource leaks following error handling routines
- Return correct error values and fix error handling in general
- Repair incorrect device names - used for device matching
- Remedy broken module auto-loading"
* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
iio: adc: max77541: Add ADI MAX77541 ADC Support
regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
mfd: Switch two more drivers back to use struct i2c_driver::probe
dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
mfd: stmpe: Only disable the regulators if they are enabled
mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
mfd: core: Use of_property_read_reg() to parse "reg"
mfd: stmfx: Nullify stmfx->vdd in case of error
mfd: stmfx: Fix error path in stmfx_chip_init
mfd: intel-lpss: Add missing check for platform_get_resource
mfd: stpmic1: Add PMIC poweroff via sys-off handler
mfd: stpmic1: Fixup main control register and bits naming
dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
mfd: tps65219: Add support for soft shutdown via sys-off API
mfd: pm8008: Drop bogus i2c module alias
mfd: pm8008: Fix module autoloading
mfd: tps65219: Add GPIO cell instance
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- tegra: support for Tegra264
- broadcom: convert bcm2835 bindings from txt to yaml bcm2835
- qcom: support for IPQ5018
- ti: always zero TX data fields
* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
mailbox: tegra: add support for Tegra264
dt-bindings: mailbox: tegra: Document Tegra264 HSP
dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"The isl1208 dirver was reworked tobe able to work as part of an MFD.
All the Loongson chips are now supported through a new driver, the old
one is removed.
Summary:
Subsystem:
- Switch i2c drivers back to use .probe()
- Constify pointers to hwmon_channel_info
New driver:
- Loongson on chip RTC, replacing the Loongson 1 only driver
Drivers:
- isl1208: cleanup and support for RAA215300
- st-lpc: cleanups
- stm32: fix wakeup"
* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
rtc: Add rtc driver for the Loongson family chips
rtc: Remove the Loongson-1 RTC driver
dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
rtc: rv3028: make rv3028 probeable from userspace
rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
rtc: isl1208: Add isl1208_set_xtoscb()
rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
rtc: isl1208: Make similar I2C and DT-based matching table
rtc: isl1208: Drop name variable
dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
dt-bindings: rtc: isl1208: Convert to json-schema
rtc: st-lpc: Simplify clk handling in st_rtc_probe()
rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
rtc: stm32: remove dedicated wakeup management
dt-bindings: rtc: restrict node name suffixes
rtc: add HAS_IOPORT dependencies
rtc: Switch i2c drivers back to use .probe()
rtc: rv3032: constify pointers to hwmon_channel_info
rtc: isl12022: constify pointers to hwmon_channel_info
rtc: ds3232: constify pointers to hwmon_channel_info
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
- svc: fix suspend/resume on some platforms, fix locking issues
* tag 'i3c/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: add NACK check after start byte sent
i3c: master: svc: fix cpu schedule in spin lock
i3c: master: svc: fix i3c suspend/resume issue
|
|
The parameter name in the function declaration and definition
should be the same.
drivers/vhost/vhost.h,
int vhost_get_vq_desc(..., unsigned int iov_count,...);
drivers/vhost/vhost.c,
int vhost_get_vq_desc(..., unsigned int iov_size,...)
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20230621093835.36878-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vduse_vdpa_set_vq_affinity callback can be called
with NULL value as cpu_mask when deleting the vduse
device.
This patch resets virtqueue's IRQ affinity mask value
to set all CPUs instead of dereferencing NULL cpu_mask.
[ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 4760.959110] #PF: supervisor read access in kernel mode
[ 4760.964247] #PF: error_code(0x0000) - not-present page
[ 4760.969385] PGD 0 P4D 0
[ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI
[ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4
[ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020
[ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130
[ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66
[ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246
[ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400
[ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898
[ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000
[ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000
[ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10
[ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000
[ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0
[ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4761.088909] PKRU: 55555554
[ 4761.091620] Call Trace:
[ 4761.094074] <TASK>
[ 4761.096180] ? __die+0x1f/0x70
[ 4761.099238] ? page_fault_oops+0x171/0x4f0
[ 4761.103340] ? exc_page_fault+0x7b/0x180
[ 4761.107265] ? asm_exc_page_fault+0x22/0x30
[ 4761.111460] ? memcpy_orig+0xc5/0x130
[ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse]
[ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net]
[ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net]
[ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net]
[ 4761.136580] virtio_dev_remove+0x3a/0x90
[ 4761.140509] device_release_driver_internal+0x19b/0x200
[ 4761.145742] bus_remove_device+0xc2/0x130
[ 4761.149755] device_del+0x158/0x3e0
[ 4761.153245] ? kernfs_find_ns+0x35/0xc0
[ 4761.157086] device_unregister+0x13/0x60
[ 4761.161010] unregister_virtio_device+0x11/0x20
[ 4761.165543] device_release_driver_internal+0x19b/0x200
[ 4761.170770] bus_remove_device+0xc2/0x130
[ 4761.174782] device_del+0x158/0x3e0
[ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa]
[ 4761.183336] device_unregister+0x13/0x60
[ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa]
Fixes: 28f6288eb63d ("vduse: Support set_vq_affinity callback")
Cc: xieyongji@bytedance.com
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230622204851.318125-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
|
|
This patch drops the requirement that we can only switch workers if work
has not been queued by using RCU for the vq based queueing paths and a
mutex for the device wide flush.
We can also use this to support SIGKILL properly in the future where we
should exit almost immediately after getting that signal. With this
patch, when get_signal returns true, we can set the vq->worker to NULL
and do a synchronize_rcu to prevent new work from being queued to the
vhost_task that has been killed.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-18-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This has vhost-scsi support the worker ioctls by calling the
vhost_worker_ioctl helper.
With a single worker, the single thread becomes a bottlneck when trying
to use 3 or more virtqueues like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
With the patches and doing a worker per vq, we can scale to at least
16 vCPUs/vqs (that's my system limit) with the same command fio command
above with numjobs=16:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=64 --numjobs=16
which gives around 2002K IOPs.
Note that for testing I dropped depth to 64 above because the vhost/virt
layer supports only 1024 total commands per device. And the only tuning I
did was set LIO's emulate_pr to 0 to avoid LIO's PR lock in the main IO
path which becomes an issue at around 12 jobs/virtqueues.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-17-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For vhost-scsi with 3 vqs or more and a workload that tries to use
them in parallel like:
fio --filename=/dev/sdb --direct=1 --rw=randrw --bs=4k \
--ioengine=libaio --iodepth=128 --numjobs=3
the single vhost worker thread will become a bottlneck and we are stuck
at around 500K IOPs no matter how many jobs, virtqueues, and CPUs are
used.
To better utilize virtqueues and available CPUs, this patch allows
userspace to create workers and bind them to vqs. You can have N workers
per dev and also share N workers with M vqs on that dev.
This patch adds the interface related code and the next patch will hook
vhost-scsi into it. The patches do not try to hook net and vsock into
the interface because:
1. multiple workers don't seem to help vsock. The problem is that with
only 2 virtqueues we never fully use the existing worker when doing
bidirectional tests. This seems to match vhost-scsi where we don't see
the worker as a bottleneck until 3 virtqueues are used.
2. net already has a way to use multiple workers.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-16-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patch allows userspace to create multiple workers per device,
so this patch replaces the vhost_worker pointer with an xarray so we
can store mupltiple workers and look them up.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-15-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The next patches add new vhost worker ioctls which will need to get a
vhost_virtqueue from a userspace struct which specifies the vq's index.
This moves the vhost_vring_ioctl code to do this to a helper so it can
be shared.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-14-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_work_queue is no longer used. Each driver is using the poll or vq
based queueing, so remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-13-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With one worker we will always send the scsi cmd responses then send the
TMF rsp, because LIO will always complete the scsi cmds first then call
into us to send the TMF response.
With multiple workers, the IO vq workers could be running while the
TMF/ctl vq worker is running so this has us do a flush before completing
the TMF to make sure cmds are completed when it's work is later queued
and run.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-12-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert from vhost_work_queue to vhost_vq_work_queue so we can
remove vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-11-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch separates the scsi cmd completion code paths so we can complete
cmds based on their vq instead of having all cmds complete on the same
worker/CPU. This will be useful with the next patches that allow us to
create mulitple worker threads and bind them to different vqs, and we can
have completions running on different threads/CPUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230626232307.97930-10-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Convert from vhost_work_queue to vhost_vq_work_queue, so we can drop
vhost_work_queue.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-9-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This has the drivers pass in their poll to vq mapping and then converts
the core poll code to use the vq based helpers. In the next patches we
will allow vqs to be handled by different workers, so to allow drivers
to execute operations like queue, stop, flush, etc on specific polls/vqs
we need to know the mappings.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch has the core work flush function take a worker. When we
support multiple workers we can then flush each worker during device
removal, stoppage, etc. It also adds a helper to flush specific
virtqueues, so vhost-scsi can flush IO vqs from it's ctl vq.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch has the core work queueing function take a worker for when we
support multiple workers. It also adds a helper that takes a vq during
queueing so modules can control which vq/worker to queue work on.
This temp leaves vhost_work_queue. It will be removed when the drivers
are converted in the next patches.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230626232307.97930-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In the next patches each vq might have different workers so one could
have work but others do not. For net, we only want to check specific vqs,
so this adds a helper to check if a vq has work pending and converts
vhost-net to use it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230626232307.97930-5-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
