summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-04-23USB: hcd-pci: Fully suspend across freeze/thaw cycleEvan Green
The documentation for the freeze() method says that it "should quiesce the device so that it doesn't generate IRQs or DMA". The unspoken consequence of not doing this is that MSIs aimed at non-boot CPUs may get fully lost if they're sent during the period where the target CPU is offline. The current callbacks for USB HCD do not fully quiesce interrupts, specifically on XHCI. Change to use the full suspend/resume flow for freeze/thaw to ensure interrupts are fully quiesced. This fixes issues where USB devices fail to thaw during hibernation because XHCI misses its interrupt and cannot recover. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20220421103751.v3.2.I8226c7fdae88329ef70957b96a39b346c69a914e@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23USB: core: Disable remote wakeup for freeze/quiesceEvan Green
The PM_EVENT_FREEZE and PM_EVENT_QUIESCE messages should cause the device to stop generating interrupts. USB core was previously allowing devices that were already runtime suspended to keep remote wakeup enabled if they had gone down that way. This violates the contract with pm, and can potentially cause MSI interrupts to be lost. Change that so that if a device is runtime suspended with remote wakeups enabled, it will be resumed to ensure remote wakeup is always disabled across a freeze. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20220421103751.v3.1.I2c636c4decc358f5e6c27b810748904cc69beada@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23usb: dwc3: pci: Fix pm_runtime_get_sync() error checkingZheng Yongjun
If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1, so a test for negative value should be used to check for errors. Fixes: 8eed00b237a28 ("usb: dwc3: pci: Runtime resume child device from wq") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220422062652.10575-1-zhengyongjun3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23drivers: usb: host: Fix deadlock in oxu_bus_suspend()Duoming Zhou
There is a deadlock in oxu_bus_suspend(), which is shown below: (Thread 1) | (Thread 2) | timer_action() oxu_bus_suspend() | mod_timer() spin_lock_irq() //(1) | (wait a time) ... | oxu_watchdog() del_timer_sync() | spin_lock_irq() //(2) (wait timer to stop) | ... We hold oxu->lock in position (1) of thread 1, and use del_timer_sync() to wait timer to stop, but timer handler also need oxu->lock in position (2) of thread 2. As a result, oxu_bus_suspend() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irq(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220417120305.64577-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23usb: dwc3: gadget: Replace list_for_each_entry_safe() if using givebackWesley Cheng
The list_for_each_entry_safe() macro saves the current item (n) and the item after (n+1), so that n can be safely removed without corrupting the list. However, when traversing the list and removing items using gadget giveback, the DWC3 lock is briefly released, allowing other routines to execute. There is a situation where, while items are being removed from the cancelled_list using dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable routine is running in parallel (due to UDC unbind). As the cleanup routine removes n, and the pullup disable removes n+1, once the cleanup retakes the DWC3 lock, it references a request who was already removed/handled. With list debug enabled, this leads to a panic. Ensure all instances of the macro are replaced where gadget giveback is used. Example call stack: Thread#1: __dwc3_gadget_ep_set_halt() - CLEAR HALT -> dwc3_gadget_ep_cleanup_cancelled_requests() ->list_for_each_entry_safe() ->dwc3_gadget_giveback(n) ->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list] ->spin_unlock ->Thread#2 executes ... ->dwc3_gadget_giveback(n+1) ->Already removed! Thread#2: dwc3_gadget_pullup() ->waiting for dwc3 spin_lock ... ->Thread#1 released lock ->dwc3_stop_active_transfers() ->dwc3_remove_requests() ->fetches n+1 item from cancelled_list (n removed by Thread#1) ->dwc3_gadget_giveback() ->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list] ->spin_unlock Fixes: d4f1afe5e896 ("usb: dwc3: gadget: move requests to cancelled_list") Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220414183521.23451-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-23usb: dwc3: EP clear halt leading to clearing of delayed_statusWesley Cheng
The usb_ep_clear_halt() API can be called from the function driver, and translates to dwc3_gadget_ep_set_halt(). This routine is shared with when the host issues a clear feature ENDPOINT_HALT, and is differentiated by the protocol argument. If the following sequence occurs, there can be a situation where the delayed_status flag is improperly cleared for the wrong SETUP transaction: 1. Vendor specific control transfer returns USB_GADGET_DELAYED_STATUS. 2. DWC3 gadget sets dwc->delayed_status to '1'. 3. Another function driver issues a usb_ep_clear_halt() call. 4. DWC3 gadget issues dwc3_stop_active_transfer() and sets DWC3_EP_PENDING_CLEAR_STALL. 5. EP command complete interrupt triggers for the end transfer, and dwc3_ep0_send_delayed_status() is allowed to run, as delayed_status is '1' due to step#1. 6. STATUS phase is sent, and delayed_status is cleared. 7. Vendor specific control transfer is finished being handled, and issues usb_composite_setup_continue(). This results in queuing of a data phase. Cache the protocol flag so that DWC3 gadget is aware of when the clear halt is due to a SETUP request from the host versus when it is sourced from a function driver. This allows for the EP command complete interrupt to know if it needs to issue a delayed status phase. Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220414073902.21960-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22usb: dwc3: Don't switch OTG -> peripheral if extcon is presentAndrey Smirnov
If the extcon device exists, get the mode from the extcon device. If the controller is DRD and the driver is unable to determine the mode, only then default the dr_mode to USB_DR_MODE_PERIPHERAL. Cc: Felipe Balbi <balbi@kernel.org> Cc: Thinh Nguyen <thinhn@synopsys.com> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Link: https://lore.kernel.org/r/20220403164907.662860-1-andrew.smirnov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: musb: mediatek: Use clk_bulk API to simplify clock operationsAngeloGioacchino Del Regno
This driver uses three clocks and there's no special handling, they're either enabled or disabled sequentially: migrate to the clk_bulk API to simplify clock handling. This patch brings no functional changes. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220404145558.93340-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: dwc2: Add OTG support for Ingenic SoCs.周琰杰 (Zhou Yanjie)
Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Introduce support for disable Ingenic overcurrent detection, once selected, it enables the GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. This patch is derived from Dragan Čečavac (in the kernel 3.18.3 tree of CI20). It is very useful for the MIPS Creator CI20 (r1). Without this patch, OTG port of CI20 has a great probability to face overcurrent warning, which breaks the OTG functionality. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1649964337-114337-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: net2272: clean up commentsTom Rix
Spelling replacements definiton to definition acceptible to acceptable seperately to separately Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220419182142.1805918-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: tegra-xudc: clean up commentsTom Rix
Spelling replacements endpiont to endpoint Compliacne to Compliance Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220417130712.3932247-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: s3c-hsudc: clean up commentsTom Rix
Spelling replacements occured to occurred currenty to currently Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220418133619.2852678-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: pxa27x_udc: clean up commentTom Rix
Spelling replacement endpoitn to endpoint Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220418134838.1236023-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: omap_udc: clean up commentTom Rix
Spelling replacement reactiviting to reactivating Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220418143906.475932-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: core: devices: remove dead code under #ifdef PROC_EXTRASergey Shtylyov
usb_dump_hub_descriptor() and usb_dump_string() are defined under #ifdef PROC_EXTRA (while PROC_EXTRA doesn't seem to have ever been #define'd) since the dawn of the git era -- remove this dead code at last... Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/ec08915b-faf2-2f0b-dfb1-048dfa2c67f3@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: musb: Fix missing of_node_put() in omap2430_probeMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 8934d3e4d0e7 ("usb: musb: omap2430: Don't use omap_get_control_dev()") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220309111033.24487-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: f_acm: add support for USB_CDC_REQ_SEND_BREAKMichael Grzeschik
Currently the usb side setting of the USB_CDC_REQ_SEND_BREAK control is not supported. This patch adds the support. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220406192914.3302636-1-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: dwc3: gadget: increase tx fifo size for ss isoc endpointsDan Vacura
Improve performance of isoc transfers in superspeed by increasing the number of possible endpoints available, matching that of what was configured for bulk transfers. Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220420183338.445622-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: host: ohci-omap: Make it CCF clk API compatibleJanusz Krzysztofik
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the driver to be compatible with CCF implementation of clock API. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20220402114353.130775-1-jmkrzyszt@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: omap_udc: Make it CCF clk API compatibleJanusz Krzysztofik
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the driver to be compatible with CCF implementation of clock API. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Link: https://lore.kernel.org/r/20220402112658.130191-1-jmkrzyszt@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB / dwc3: Fix three doc-build warningsKushagra Verma
Two kerneldoc comments in gadget.c have excess function parameter description or wrong prototype name and one kerneldoc comment in core.c has an excess function parameter description, resulting in these three doc-build warnings: 1. ./drivers/usb/dwc3/gadget.c:675: warning: Excess function parameter 'nfifos' description in 'dwc3_gadget_calc_tx_fifo_size' 2. ./drivers/usb/dwc3/gadget.c:700: warning: expecting prototype for dwc3_gadget_clear_tx_fifo_size(). Prototype was for dwc3_gadget_clear_tx_fifos() instead 3. ./drivers/usb/dwc3/core.c:347: warning: Excess function parameter 'ref_clk_per' description in 'dwc3_ref_clk_period' Fix the warnings by correcting the prototype name and removing excess parameter descriptions. Signed-off-by: Kushagra Verma <kushagra765@outlook.com> Link: https://lore.kernel.org/r/SI2PR01MB392995043CACD80884A13764F81C9@SI2PR01MB3929.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: storage: karma: fix rio_karma_init returnLin Ma
The function rio_karam_init() should return -ENOMEM instead of value 0 (USB_STOR_TRANSPORT_GOOD) when allocation fails. Similarly, it should return -EIO when rio_karma_send_command() fails. Fixes: dfe0d3ba20e8 ("USB Storage: add rio karma eject support") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220412144359.28447-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: net2280: use swap() instead of open coding itGuo Zhengkui
Address the following coccicheck warning: drivers/usb/gadget/udc/net2280.c:940:20-21: WARNING opportunity for swap(). drivers/usb/gadget/udc/net2280.c:944:25-26: WARNING opportunity for swap(). by using swap() for the swapping of variable values and drop the tmp variables (`tmp` and `end`) that are not needed any more. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20220407100459.3605-1-guozhengkui@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: u_audio: clean up some inconsistent indentingJiapeng Chong
Eliminate the follow smatch warning: drivers/usb/gadget/function/u_audio.c:1182 g_audio_setup() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220407062410.89214-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: host: isp116x: check return value after calling platform_get_resource()Zhen Ni
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Zhen Ni <nizhen@uniontech.com> Link: https://lore.kernel.org/r/20220302033716.31272-1-nizhen@uniontech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb:oxu210hp-hcd: Use platform_get_irq() to get the interruptMinghao Chi
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220309053611.2081191-1-chi.minghao@zte.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb-storage: isd200: fix initFunction error returnLin Ma
The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> isd200_init_info() That is, the error return of the initFunction should tell USB core what happened instead of using custom error code like ISD200_ERROR. Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220407022110.3757-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb-storage: shuttle_usbat: fix initFunction error returnLin Ma
The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> init_usbat_cd() or init_usbat_flash() -> init_usbat() That is, the error return of the initFunction should tell USB core what happened instead of using constant or error code like USB_STOR_TRANSPORT_FAILED. Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220407022115.3773-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb-storage: alauda: fix initFunction error returnLin Ma
The initFunction is called when probing a new device, its call relation is like: USB core: probe() -> usb_stor_probe2() -> usb_stor_acquire_resources() -> init_alauda() That is, the error return of the initFunction should tell USB core what happened instead of using error code like USB_STOR_TRANSPORT_ERROR. Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220407022058.3741-1-linma@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: Prepare cleanup of powerpc's asm/prom.hChristophe Leroy
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up in a further step, first clean all files that include asm/prom.h Some files don't need asm/prom.h at all. For those ones, just remove inclusion of asm/prom.h Some files don't need any of the items provided by asm/prom.h, but need some of the headers included by asm/prom.h. For those ones, add the needed headers that are brought by asm/prom.h at the moment, then remove asm/prom.h Some files really need asm/prom.h but also need some of the headers included by asm/prom.h. For those one, leave asm/prom.h but also add the needed headers so that they can be removed from asm/prom.h in a later step. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/295e87a3094a92784657f7060fb0927e762a2e3c.1650011506.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: usbip: add missing device lock on tweak configuration cmdNiels Dossche
The function documentation of usb_set_configuration says that its callers should hold the device lock. This lock is held for all callsites except tweak_set_configuration_cmd. The code path can be executed for example when attaching a remote USB device. The solution is to surround the call by the device lock. This bug was found using my experimental own-developed static analysis tool, which reported the missing lock on v5.17.2. I manually verified this bug report by doing code review as well. I runtime checked that the required lock is not held. I compiled and runtime tested this on x86_64 with a USB mouse. After applying this patch, my analyser no longer reports this potential bug. Fixes: 2c8c98158946 ("staging: usbip: let client choose device configuration") Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: usbip: fix a refcount leak in stub_probe()Hangyu Hua
usb_get_dev() is called in stub_device_alloc(). When stub_probe() fails after that, usb_put_dev() needs to be called to release the reference. Fix this by moving usb_put_dev() to sdev_free error path handling. Find this by code review. Fixes: 3ff67445750a ("usbip: fix error handling in stub_probe()") Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220412020257.9767-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21drivers: usb: dwc3: Add AM62 USB wrapper driverAswath Govindraju
In AM62 SoC, the Designware Core USB3 IP is progammed to operate in USB2.0 only mode. Add driver for AM62 USB DWC3 Wrapper. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220414103211.16202-3-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: typec: tipd: Only update power status on IRQGuido Günther
Instead of refetching power status cache it and only update it when a change is signalled via irq. This simplifies tracing and adding more supply properties in follow up patches. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220317154518.4082046-2-sebastian.krzyszkowiak@puri.sm Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: typec: mux: intel_pmc_mux: Add retry logic to a PMC commandTanveer Alam
There are few scenerio when PMC reports 'busy condition' and command fail. If PMC receives a high priority command while servicing a low priority command then it discards the low priority command and start servicing the high priority command. The lower priority command fail and driver returns error. If the same command resend to the PMC then PMC latches the command and service it accordingly. Thus adds the retry logic for the PMC command. Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Tanveer Alam <tanveer1.alam@intel.com> Link: https://lore.kernel.org/r/20220328105137.6223-1-tanveer1.alam@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: uvc: improve sg exit conditionMichael Grzeschik
The exit condition to quit iterating over the sg_list, while encoding the sg entries, has to consider the case that the dma_len of the entry could be zero. This patch takes this condition to account. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220402232744.3622565-4-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: uvc: giveback vb2 buffer on req completeMichael Grzeschik
On uvc_video_encode_isoc_sg the mapped vb2 buffer is returned to early. Only after the last usb_request worked with the buffer it is allowed to give it back to vb2. This patch fixes that. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220402232744.3622565-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: uvc: rework uvcg_queue_next_buffer to uvcg_complete_bufferMichael Grzeschik
The function uvcg_queue_next_buffer is used different than its name suggests. The return value nextbuf is never used by any caller. This patch reworks the function to its actual purpose, by removing the unused code and renaming it. The function name uvcg_complete_buffer makes it more clear that it is actually marking the current video buffer as complete. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220402232744.3622565-2-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: uvc: remove pause flag useDan Vacura
The pause flag doesn't appear to serve a purpose as it is possible for the pump worker thread to not be running when new buffers are queued. Before the following change was introduced: "43cd0023872e usb: gadget: uvc_video: add worker to handle the frame pumping", the pause flag status was discarded and never returned. This masked a current issues of the userspace receiving non-zero values (considered unsuccessful) and prevents trace_v4l2_qbuf() from being called. Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220413192402.26063-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21usb: gadget: uvc: allow changing interface name via configfsDan Vacura
Add a configfs entry, "function_name", to change the iInterface field for VideoControl. This name is used on host devices for user selection, useful when multiple cameras are present. The default will remain "UVC Camera". Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220401160447.5919-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-02Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fix from Jens Axboe: "Got two reports on nbd spewing warnings on load now, which is a regression from a commit that went into your tree yesterday. Revert the problematic change for now" * tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block: Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
2022-04-02Merge tag 'pci-v5.18-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Fix Hyper-V "defined but not used" build issue added during merge window (YueHaibing) * tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hv: Remove unused hv_set_msi_entry_from_desc()
2022-04-02Merge tag 'tag-chrome-platform-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Check for EC device - Fix a crash when using the cros_ec_typec driver on older hardware not capable of typec commands - Make try power role optional - Mux configuration reorganization series from Prashant cros_ec_debugfs: - Fix use after free. Thanks Tzung-bi sensorhub: - cros_ec_sensorhub fixup - Split trace include file misc: - Add new mailing list for chrome-platform development: chrome-platform@lists.linux.dev Now with patchwork!" * tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: detach log reader wq from devm platform: chrome: Split trace include file platform/chrome: cros_ec_typec: Update mux flags during partner removal platform/chrome: cros_ec_typec: Configure muxes at start of port update platform/chrome: cros_ec_typec: Get mux state inside configure_mux platform/chrome: cros_ec_typec: Move mux flag checks platform/chrome: cros_ec_typec: Check for EC device platform/chrome: cros_ec_typec: Make try power role optional MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
2022-04-02Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"Jens Axboe
This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54. Both Gabriel and Borislav report that this commit casues a regression with nbd: sysfs: cannot create duplicate filename '/dev/block/43:0' Revert it before 5.18-rc1 and we'll investigage this separately in due time. Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/ Reported-by: Gabriel L. Somlo <somlo@cmu.edu> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-01Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fixes from Jens Axboe: "Followup block driver updates and fixes for the 5.18-rc1 merge window. In detail: - NVMe pull request - Fix multipath hang when disk goes live over reconnect (Anton Eidelman) - fix RCU hole that allowed for endless looping in multipath round robin (Chris Leech) - remove redundant assignment after left shift (Colin Ian King) - add quirks for Samsung X5 SSDs (Monish Kumar R) - fix the read-only state for zoned namespaces with unsupposed features (Pankaj Raghav) - use a private workqueue instead of the system workqueue in nvmet (Sagi Grimberg) - allow duplicate NSIDs for private namespaces (Sungup Moon) - expose use_threaded_interrupts read-only in sysfs (Xin Hao)" - nbd minor allocation fix (Zhang) - drbd fixes and maintainer addition (Lars, Jakob, Christoph) - n64cart build fix (Jackie) - loop compat ioctl fix (Carlos) - misc fixes (Colin, Dongli)" * tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block: drbd: remove check of list iterator against head past the loop body drbd: remove usage of list iterator variable after loop nbd: fix possible overflow on 'first_minor' in nbd_dev_add() MAINTAINERS: add drbd co-maintainer drbd: fix potential silent data corruption loop: fix ioctl calls using compat_loop_info nvme-multipath: fix hang when disk goes live over reconnect nvme: fix RCU hole that allowed for endless looping in multipath round robin nvme: allow duplicate NSIDs for private namespaces nvmet: remove redundant assignment after left shift nvmet: use a private workqueue instead of the system workqueue nvme-pci: add quirks for Samsung X5 SSDs nvme-pci: expose use_threaded_interrupts read-only in sysfs nvme: fix the read-only state for zoned namespaces with unsupposed features n64cart: convert bi_disk to bi_bdev->bd_disk fix build xen/blkfront: fix comment for need_copy xen-blkback: remove redundant assignment to variable i
2022-04-01Merge tag 'for-5.18/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM integrity shrink crash due to journal entry not being marked unused. - Fix DM bio polling to handle possibility that underlying device(s) return BLK_STS_AGAIN during submission. - Fix dm_io and dm_target_io flags race condition on Alpha. - Add some pr_err debugging to help debug cases when DM ioctl structure is corrupted. * tag 'for-5.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix bio polling to handle possibile BLK_STS_AGAIN dm: fix dm_io and dm_target_io flags race condition on Alpha dm integrity: set journal entry unused when shrinking device dm ioctl: log an error if the ioctl structure is corrupted
2022-04-01Merge tag 'riscv-for-linus-5.18-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "This has a handful of new features: - Support for CURRENT_STACK_POINTER, which enables some extra stack debugging for HARDENED_USERCOPY. - Support for the new SBI CPU idle extension, via cpuidle and suspend drivers. - Profiling has been enabled in the defconfigs. but is mostly fixes and cleanups" * tag 'riscv-for-linus-5.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (21 commits) RISC-V: K210 defconfigs: Drop redundant MEMBARRIER=n RISC-V: defconfig: Drop redundant SBI HVC and earlycon Documentation: riscv: remove non-existent directory from table of contents riscv: cpu.c: don't use kernel-doc markers for comments RISC-V: Enable profiling by default RISC-V: module: fix apply_r_riscv_rcv_branch_rela typo RISC-V: Declare per cpu boot data as static RISC-V: Fix a comment typo in riscv_of_parent_hartid() riscv: Increase stack size under KASAN riscv: Fix fill_callchain return value riscv: dts: canaan: Fix SPI3 bus width riscv: Rename "sp_in_global" to "current_stack_pointer" riscv module: remove (NOLOAD) RISC-V: Enable RISC-V SBI CPU Idle driver for QEMU virt machine dt-bindings: Add common bindings for ARM and RISC-V idle states cpuidle: Add RISC-V SBI CPU idle driver cpuidle: Factor-out power domain related code from PSCI domain driver RISC-V: Add SBI HSM suspend related defines RISC-V: Add arch functions for non-retentive suspend entry/exit RISC-V: Rename relocate() and make it global ...
2022-04-01Merge tag 's390-5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Add kretprobes framepointer verification and return address recovery in stacktrace. - Support control domain masks on custom zcrypt devices and filter admin requests. - Cleanup timer API usage. - Rework absolute lowcore access helpers. - Other various small improvements and fixes. * tag 's390-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (26 commits) s390/alternatives: avoid using jgnop mnemonic s390/pci: rename get_zdev_by_bus() to zdev_from_bus() s390/pci: improve zpci_dev reference counting s390/smp: use physical address for SIGP_SET_PREFIX command s390: cleanup timer API use s390/zcrypt: fix using the correct variable for sizeof() s390/vfio-ap: fix kernel doc and signature of group notifier functions s390/maccess: rework absolute lowcore accessors s390/smp: cleanup control register update routines s390/smp: cleanup target CPU callback starting s390/test_unwind: verify __kretprobe_trampoline is replaced s390/unwind: avoid duplicated unwinding entries for kretprobes s390/unwind: recover kretprobe modified return address in stacktrace s390/kprobes: enable kretprobes framepointer verification s390/test_unwind: extend kretprobe test s390/ap: adjust whitespace s390/ap: use insn format for new instructions s390/alternatives: use insn format for new instructions s390/alternatives: use instructions instead of byte patterns s390/traps: improve panic message for translation-specification exception ...
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2025-01-30 03:18:38 +0000