| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
|
|
Drop support for Devicetree from, because the binding is being reverted
(on basis of duplicating existing binding) and property was not added to
the original binding.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Background
~~~~~~~~~~
The driver uses 'use_acpi = true' in C-state custom table for all Xeon
platforms. The meaning of this flag is as follows.
1. If a C-state from the custom table is defined in ACPI _CST (matched
by the mwait hint), then enable this C-state.
2. Otherwise, disable this C-state, unless the C-sate definition in the
custom table has the 'CPUIDLE_FLAG_ALWAYS_ENABLE' flag set, in which
case enabled it.
The goal is to honor BIOS C6 settings - If BIOS disables C6, disable it
by default in the OS too (but it can be enabled via sysfs).
This works well on Xeons that expose only one flavor of C6. This are all
Xeons except for the newest Granite Rapids (GNR) and Sierra Forest (SRF).
The problem
~~~~~~~~~~~
GNR and SRF have 2 flavors of C6: C6/C6P on GNR, C6S/C6SP on SRF. The
the "P" flavor allows for the package C6, while the "non-P" flavor
allows only for core/module C6.
As far as this patch is concerned, both GNR and SRF platforms are
handled the same way. Therefore, further discussion is focused on GNR,
but it applies to SRF as well.
On Intel Xeon platforms, BIOS exposes only 2 ACPI C-states: C1 and C2.
Well, depending on BIOS settings, C2 may be named as C3. But there still
will be only 2 states - C1 and C3. But this is a non-essential detail,
so further discussion is focused on the ACPI C1 and C2 case.
On pre-GNR/SRF Xeon platforms, ACPI C1 is mapped to C1 or C1E, and ACPI
C2 is mapped to C6. The 'use_acpi' flag works just fine:
* If ACPI C2 enabled, enable C6.
* Otherwise, disable C6.
However, on GNR there are 2 flavors of C6, so BIOS maps ACPI C2 to
either C6 or C6P, depending on the user settings. As a result, due to
the 'use_acpi' flag, 'intel_idle' disables least one of the C6 flavors.
BIOS | OS | Verdict
----------------------------------------------------|---------
ACPI C2 disabled | C6 disabled, C6P disabled | OK
ACPI C2 mapped to C6 | C6 enabled, C6P disabled | Not OK
ACPI C2 mapped to C6P | C6 disabled, C6P enabled | Not OK
The goal of 'use_acpi' is to honor BIOS ACPI C2 disabled case, which
works fine. But if ACPI C2 is enabled, the goal is to enable all flavors
of C6, not just one of the flavors. This was overlooked when enabling
GNR/SRF platforms.
In other words, before GNR/SRF, the ACPI C2 status was binary - enabled
or disabled. But it is not binary on GNR/SRF, however the goal is to
continue treat it as binary.
The fix
~~~~~~~
Notice, that current algorithm matches ACPI and custom table C-states
by the mwait hint. However, mwait hint consists of the 'state' and
'sub-state' parts, and all C6 flavors have the same state value of 0x20,
but different sub-state values.
Introduce new C-state table flag - CPUIDLE_FLAG_PARTIAL_HINT_MATCH and
add it to both C6 flavors of the GNR/SRF platforms.
When matching ACPI _CST and custom table C-states, match only the start
part if the C-state has CPUIDLE_FLAG_PARTIAL_HINT_MATCH, other wise
match both state and sub-state parts (as before).
With this fix, GNR C-states enabled/disabled status looks like this.
BIOS | OS
----------------------------------------------------
ACPI C2 disabled | C6 disabled, C6P disabled
ACPI C2 mapped to C6 | C6 enabled, C6P enabled
ACPI C2 mapped to C6P | C6 enabled, C6P enabled
Possible alternative
~~~~~~~~~~~~~~~~~~~~
The alternative would be to remove 'use_acpi' flag for GNR and SRF.
This would be a simpler solution, but it would violate the principle of
least surprise - users of Xeon platforms are used to the fact that
intel_idle honors C6 enabled/disabled flag. It is more consistent user
experience if GNR/SRF continue doing so.
How tested
~~~~~~~~~~
Tested on GNR and SRF platform with all the 3 BIOS configurations: ACPI
C2 disabled, mapped to C6/C6S, mapped to C6P/C6SP.
Tested on Ice lake Xeon and Sapphire Rapids Xeon platforms with ACPI C2
enabled and disabled, just to verify that the patch does not break older
Xeons.
Fixes: 92813fd5b156 ("intel_idle: add Sierra Forest SoC support")
Fixes: 370406bf5738 ("intel_idle: add Granite Rapids Xeon support")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20240913165143.4140073-1-dedekind1@gmail.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
program SDMAx_QUEUEx_SCHEDULE_CNTL for context switch due to
quantum in KFD for GFX12.
Signed-off-by: Sreekant Somasekharan <sreekant.somasekharan@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
v1 - remove cs parse code (Christian)
On VCN v4_0_6 AV1 is supported on both the instances.
Remove cs IB parse code since explict handling of AV1 schedule is
not required.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Make CU occupancy calculations work on GFX 9.4.3 by
updating the logic to handle multiple XCCs correctly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, the code uses the IH_VMID_X_LUT register to map
a queue's vmid to the corresponding PASID. This logic is racy
since CP can update the VMID-PASID mapping anytime especially
when there are more processes than number of vmids. Update the
logic to calculate CU occupancy by matching doorbell offset of
the queue with valid wave counts against the process's queues.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VF FLR will be triggered by host driver before job timeout,
hence the error status of GPU get cleared. Performing a
coredump here is unnecessary.
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch tries to solve the basic problem we also need to sync to
the KFD fences of the BO because otherwise it can be that we clear
PTEs while the KFD queues are still running.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
enable_level_process_quantum_check is requried to enable process
quantum based scheduling.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
This 'struct kobj_type' is not modified. It is only used in
kobject_init_and_add() which takes a 'const struct kobj_type *ktype'
parameter.
Constifying this structure and moving it to a read-only section,
and this can increase over all security.
```
[Before]
text data bss dec hex filename
5974 1008 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
[After]
text data bss dec hex filename
6038 944 96 7078 1ba6 drivers/firmware/qemu_fw_cfg.o
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Message-Id: <20240904011743.2010319-1-lihongbo22@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently, when a new MR is set up, the old MR is deleted. MR deletion
is about 30-40% the time of MR creation. As deleting the old MR is not
important for the process of setting up the new MR, this operation
can be postponed.
This series adds a workqueue that does MR garbage collection at a later
point. If the MR lock is taken, the handler will back off and
reschedule. The exception during shutdown: then the handler must
not postpone the work.
Note that this is only a speculative optimization: if there is some
mapping operation that is triggered while the garbage collector handler
has the lock taken, this operation it will have to wait for the handler
to finish.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There's currently not a lot of action happening during
the init/destroy of MR resources. But more will be added
in the upcoming patches.
As the mr mutex lock init/destroy has been moved to these
new functions, the lifetime has now shifted away from
mlx5_vdpa_alloc_resources() / mlx5_vdpa_free_resources()
into these new functions. However, the lifetime at the
outer scope remains the same:
mlx5_vdpa_dev_add() / mlx5_vdpa_dev_free()
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that the mr resources have their own namespace in the
struct, give the lock a clearer name.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Group all mapping related resources into their own structure.
Upcoming patches will add more members in this new structure.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A followup patch will use this name for something else.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the async interface to issue MTT MKEY deletion.
This makes destroy_user_mr() on average 8x times faster.
This number is also dependent on the size of the MR being
deleted.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240830105838.2666587-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Use the async interface to issue MTT MKEY creation.
Extra care is taken at the allocation of FW input commands
due to the MTT tables having variable sizes depending on
MR.
The indirect MKEY is still created synchronously at the
end as the direct MKEYs need to be filled in.
This makes create_user_mr() 3-5x faster, depending on
the size of the MR.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240830105838.2666587-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
There is no caller and implementation in tree.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Message-Id: <20240819140930.122019-1-yuehaibing@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@kernel.org>
Reviewed-by: Shannon Nelson <<a href="mailto:shannon.nelson@amd.com" target="_blank">shannon.nelson@amd.com</a>><br>
Reviewed-by: Zhu Lingshan <lingshan.zhu@kernel.org>
|
|
change_num_qps() is still suspending/resuming VQs one by one.
This change switches to parallel suspend/resume.
When increasing the number of queues the flow has changed a bit for
simplicity: the setup_vq() function will always be called before
resume_vqs(). If the VQ is initialized, setup_vq() will exit early. If
the VQ is not initialized, setup_vq() will create it and resume_vqs()
will resume it.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-11-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
change_num_qps() has a lot of multiplications by 2 to convert
the number of VQ pairs to number of VQs. This patch simplifies
the code by doing the VQP -> VQ count conversion at the beginning
in a variable.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-10-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Unregistering notifiers is a costly operation. Instead of removing
the notifiers during device suspend and adding them back at resume,
simply ignore the call when the device is suspended.
At resume time call queue_link_work() to make sure that the device state
is propagated in case there were changes.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~13 ms to ~2.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-9-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Currently device resume works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device resume.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device resume time is reduced from
~16 ms to ~4.5 ms.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-8-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Currently device suspend works on vqs serially. Building up on previous
changes that converted vq operations to the async api, this patch
parallelizes the device suspend:
1) Suspend all active vqs parallel.
2) Query suspended vqs in parallel.
For 1 vDPA device x 32 VQs (16 VQPs) attached to a large VM (256 GB RAM,
32 CPUs x 2 threads per core), the device suspend time is reduced from
~37 ms to ~13 ms.
A later patch will remove the link unregister operation which will make
it even faster.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-7-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Switch firmware vq modify command to be issued via the async API to
allow future parallelization. The new refactored function applies the
modify on a range of vqs and waits for their execution to complete.
For now the command is still used in a serial fashion. A later patch
will switch to modifying multiple vqs in parallel.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-6-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Switch firmware vq query command to be issued via the async API to
allow future parallelization.
For now the command is still serial but the infrastructure is there
to issue commands in parallel, including ratelimiting the number
of issued async commands to firmware.
A later patch will switch to issuing more commands at a time.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-5-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Introduce a new function mlx5_vdpa_exec_async_cmds() which
wraps the mlx5_core async firmware command API in a way
that will be used to parallelize certain operation in this
driver.
The wrapper deals with the case when mlx5_cmd_exec_cb() returns
EBUSY due to the command being throttled.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-4-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
mlx5_vdpa_err() was missing. This patch adds it and uses it in the
necessary places.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20240816090159.1967650-3-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
Currently, commands that qualify as throttled can't be used via the
async API. That's due to the fact that the throttle semaphore can sleep
but the async API can't.
This patch allows throttling in the async API by using the tentative
variant of the semaphore and upon failure (semaphore at 0) returns EBUSY
to signal to the caller that they need to wait for the completion of
previously issued commands.
Furthermore, make sure that the semaphore is released in the callback.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Message-Id: <20240816090159.1967650-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
|
This patch fix the following sparse warning by applying
__force cast to pci_ers_result_t and pci_power_t.
drivers/xen/xen-pciback/pci_stub.c:760:16: sparse: warning: cast to restricted pci_ers_result_t
drivers/xen/xen-pciback/conf_space_capability.c:125:22: sparse: warning: cast to restricted pci_power_t
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240917233653.61630-1-minhuadotchen@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This reverts commit ba6353748e71bd1d7e422fec2b5c2e2dfc2e3bd9.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 95dc7565253a8564911190ebd1e4ffceb4de208a.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 8064952c65045f05ee2671fe437770e50c151776.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ba82e10c3c6b5b5d2c8279a8bd0dae5c2abaacfc.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 4f2c346e621624315e2a1405e98616a0c5ac146f.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
intel_dp_init_connector() is no place for detecting stuff via
DPCD (except perhaps for eDP). Move the colorimetry stuff into
a more appropriate place.
Cc: Jouni Högander <jouni.hogander@intel.com>
Fixes: 00076671a648 ("drm/i915/display: Move colorimetry_support from intel_psr to intel_dp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240918190441.29071-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 35dba4834bded843d5416e8caadfe82bd0ce1904)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current linux codes, there is no method to get gsi
for userspace.
For above purpose, record gsi of pcistub devices when init
pcistub and add a new syscall into privcmd to let userspace
can get gsi when they have a need.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In PVH dom0, the gsis don't get registered, but the gsi of
a passthrough device must be configured for it to be able to be
mapped into a domU.
When assigning a device to passthrough, proactively setup the gsi
of the device during that process.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When device on dom0 side has been reset, the vpci on Xen side
won't get notification, so that the cached state in vpci is
all out of date with the real device state.
To solve that problem, add a new function to clear all vpci
device state when device is reset on dom0 side.
And call that function in pcistub_init_device. Because when
using "pci-assignable-add" to assign a passthrough device in
Xen, it will reset passthrough device and the vpci state will
out of date, and then device will fail to restore bar state.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-2-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Any non-posted read should flush the previous write, so we don't
necessarily need to read back the value we just wrote. I've found at
least some controllers that respond with 0 for short moments after
writing the CC register with EN (enable) cleared, so the read-back is
overwriting our valid ctrl_config value and ends up breaking on the
subsequent enabling.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a
separate group") introduced the struct attribute array nvme_tls_attrs.
However, the array was not null terminated and caused BUG KASAN global-
out-of-bounds. To avoid the BUG, null terminate the array.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-nvme/jhllwfxcedrcxcnbajwl4x2l2ujcqowqcd4ps574zrafrqhjna@f4icvecutekm/
Fixes: 1e48b34c9bc7 ("nvme: split off TLS sysfs attributes into a separate group")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
During repetitive namespace remapping operations on the target the
namespace might have changed between the time the initial scan
was performed, and partition scan was invoked by device_add_disk()
in nvme_mpath_set_live(). We then end up with a stuck scanning process:
[<0>] folio_wait_bit_common+0x12a/0x310
[<0>] filemap_read_folio+0x97/0xd0
[<0>] do_read_cache_folio+0x108/0x390
[<0>] read_part_sector+0x31/0xa0
[<0>] read_lba+0xc5/0x160
[<0>] efi_partition+0xd9/0x8f0
[<0>] bdev_disk_changed+0x23d/0x6d0
[<0>] blkdev_get_whole+0x78/0xc0
[<0>] bdev_open+0x2c6/0x3b0
[<0>] bdev_file_open_by_dev+0xcb/0x120
[<0>] disk_scan_partitions+0x5d/0x100
[<0>] device_add_disk+0x402/0x420
[<0>] nvme_mpath_set_live+0x4f/0x1f0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x107/0x120 [nvme_core]
[<0>] nvme_alloc_ns+0xac6/0xe60 [nvme_core]
[<0>] nvme_scan_ns+0x2dd/0x3e0 [nvme_core]
[<0>] nvme_scan_work+0x1a3/0x490 [nvme_core]
This happens when we have several paths, some of which are inaccessible,
and the active paths are removed first. Then nvme_find_path() will requeue
I/O in the ns_head (as paths are present), but the requeue list is never
triggered as all remaining paths are inactive.
This patch checks for NVME_NSHEAD_DISK_LIVE in nvme_available_path(),
and requeue I/O after NVME_NSHEAD_DISK_LIVE has been cleared once
the last path has been removed to properly terminate pending I/O.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e332 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix macro for checking minimum GuC version (Michal Wajdeczko)
- Fix CCS offset calculation for some BMG SKUs (Matthew Auld)
- Fix locking on memory usage reporting via fdinfo and BO destroy (Matthew Auld)
- Fix GPU page fault handler on a closed VM (Matthew Brost)
- Fix overflow in oa batch buffer (José)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/lr6vhd7x5eb7gubd7utfmnwzvfqfslji4kssxyqisynzlvqjni@svgm6jot7r66
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Fix BMG support to UHBR13.5
- Two PSR fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZuvzjAbx2pmjahxK@jlahtine-mobl.ger.corp.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support cross-compiling linux-headers Debian package and kernel-devel
RPM package
- Add support for the linux-debug Pacman package
- Improve module rebuilding speed by factoring out the common code to
scripts/module-common.c
- Separate device tree build rules into scripts/Makefile.dtbs
- Add a new script to generate modules.builtin.ranges, which is useful
for tracing tools to find symbols in built-in modules
- Refactor Kconfig and misc tools
- Update Kbuild and Kconfig documentation
* tag 'kbuild-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
kbuild: doc: replace "gcc" in external module description
kbuild: doc: describe the -C option precisely for external module builds
kbuild: doc: remove the description about shipped files
kbuild: doc: drop section numbering, use references in modules.rst
kbuild: doc: throw out the local table of contents in modules.rst
kbuild: doc: remove outdated description of the limitation on -I usage
kbuild: doc: remove description about grepping CONFIG options
kbuild: doc: update the description about Kbuild/Makefile split
kbuild: remove unnecessary export of RUST_LIB_SRC
kbuild: remove append operation on cmd_ld_ko_o
kconfig: cache expression values
kconfig: use hash table to reuse expressions
kconfig: refactor expr_eliminate_dups()
kconfig: add comments to expression transformations
kconfig: change some expr_*() functions to bool
scripts: move hash function from scripts/kconfig/ to scripts/include/
kallsyms: change overflow variable to bool type
kallsyms: squash output_address()
kbuild: add install target for modules.builtin.ranges
scripts: add verifier script for builtin module range data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This adds support for the I3C HCI controller of the AMD SoC which as
expected requires quirks. Also fixes for the other drivers, including
rate selection fixes for svc.
Core:
- allow adjusting first broadcast address speed
Drivers:
- cdns: few fixes
- mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
get_i3c_mode
- svc: adjust rates, fix race condition"
* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
i3c: master: svc: adjust SDR according to i3c spec
i3c: master: svc: use slow speed for first broadcast address
i3c: master: support to adjust first broadcast address speed
i3c/master: cmd_v1: Fix the rule for getting i3c mode
i3c: master: cdns: fix module autoloading
i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
i3c: mipi-i3c-hci: Add a quirk to set timing parameters
i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
i3c: mipi-i3c-hci: Add a quirk to set PIO mode
i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
|
|
The TI_K3_M4_REMOTEPROC Kconfig entry selects OMAP2PLUS_MBOX, but that
driver in turn depends on other things, which the k4-m4 driver didn't.
This causes a Kconfig time warning:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
because you can't select something that is unavailable.
Make the dependencies for TI_K3_M4_REMOTEPROC match those of the
OMAP2PLUS_MBOX driver that it needs.
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Martyn Welch <martyn.welch@collabora.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Minor cleanup/refactor to the Qualcomm GLINK code, in order to add
trace events related to the messages exchange with the remote side,
useful for debugging a range of interoperability issues
- Rewrite the nested structs with flexible array members in order to
avoid the risk of invalid accesses
* tag 'rpmsg-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid -Wflex-array-member-not-at-end warnings
rpmsg: glink: Introduce packet tracepoints
rpmsg: glink: Pass channel to qcom_glink_send_close_ack()
rpmsg: glink: Tidy up RX advance handling
|
