| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
|
|
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- crash fix in fbcon_putcs
- avoid a possible string memory overflow in sisfb
- minor code optimizations in omapfb and fbcon
* tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: sisfb: Fix strbuf array overflow
fbcon: break earlier in search_fb_in_map and search_for_mapped_con
fbdev: omapfb: Call of_node_put(ep) only once in omapdss_of_find_source_for_first_ep()
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for the week to end the merge window, i915 and xe have a
few each, amdgpu makes up most of it with a bunch of SR-IOV related
fixes amongst others.
i915:
- Fix BMG support to UHBR13.5
- Two PSR fixes
- Fix colorimetry detection for DP
xe:
- Fix macro for checking minimum GuC version
- Fix CCS offset calculation for some BMG SKUs
- Fix locking on memory usage reporting via fdinfo and BO destroy
- Fix GPU page fault handler on a closed VM
- Fix overflow in oa batch buffer
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
- CU occupancy logic fix
- SDMA queue fix"
* tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits)
drm/amd/pm: update workload mask after the setting
drm/amdgpu: bump driver version for cleared VRAM
drm/amdgpu: fix vbios fetching for SR-IOV
drm/amdgpu: fix PTE copy corruption for sdma 7
drm/amdkfd: Add SDMA queue quantum support for GFX12
drm/amdgpu/vcn: enable AV1 on both instances
drm/amdkfd: Fix CU occupancy for GFX 9.4.3
drm/amdkfd: Update logic for CU occupancy calculations
drm/amdgpu: skip coredump after job timeout in SRIOV
drm/amdgpu: sync to KFD fences before clearing PTEs
drm/amdgpu/mes12: set enable_level_process_quantum_check
drm/i915/dp: Fix colorimetry detection
drm/amdgpu/mes12: reduce timeout
drm/amdgpu/mes11: reduce timeout
drm/amdgpu: use GEM references instead of TTMs v2
drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`
drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification'
drm/amdgpu: update golden regs for gfx12
drm/amdgpu: clean up vbios fetching code
drm/amd/display: handle nulled pipe context in DCE110's set_drr()
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-6.12-2024-09-27:
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
amdgpu:
- CU occupancy logic fix
- SDMA queue fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927202819.2978109-1-alexander.deucher@amd.com
|
|
The values of the variables xres and yres are placed in strbuf.
These variables are obtained from strbuf1.
The strbuf1 array contains digit characters
and a space if the array contains non-digit characters.
Then, when executing sprintf(strbuf, "%ux%ux8", xres, yres);
more than 16 bytes will be written to strbuf.
It is suggested to increase the size of the strbuf array to 24.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Shumilin <shum.sdl@nppct.ru>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix idle states enumeration in the intel_idle driver on platforms
supporting multiple flavors of the C6 idle state (Artem Bityutskiy)"
* tag 'pm-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: fix ACPI _CST matching for newer Xeon platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (cxl) updates from Dave Jiang:
"Major changes address HDM decoder initialization from DVSEC ranges,
refactoring the code related to cxl mailboxes to be independent of the
memory devices, and adding support for shared upstream link
access_coordinate calculation, as well as a change to remove locking
from memory notifier callback.
In addition, a number of misc cleanups and refactoring of the code are
also included.
Address HDM decoder initialization from DVSEC ranges:
- Only register non-zero DVSEC ranges
- Remove duplicate implementation of waiting for memory_info_valid
- Simplify the checking of mem_enabled in cxl_hdm_decode_init()
Refactor the code related to cxl mailboxes to be independent of the memory devices:
- Move cxl headers in include/linux/ to include/cxl
- Move all mailbox related data to 'struct cxl_mailbox'
- Refactor mailbox APIs with 'struct cxl_mailbox' as input instead of
memory device state
Add support for shared upstream link access_coordinate calculation for
configurations that have multiple targets under a switch or a root
port where the aggregated bandwidth can be greater than the upstream
link of the switch/RP upstream link:
- Preserve the CDAT access_coordinate from an endpoint
- Add the support for shared upstream link access_coordinate calculation
- Add documentation to explain how the calculations are done
Remove locking from memory notifier callback.
Misc cleanups:
- Convert devm_cxl_add_root() to return using ERR_CAST()
- cxl_test use dev_is_platform() instead of open coding
- Remove duplicate include of header core.h in core/cdat.c
- use scoped resource management to drop put_device() for cxl_port
- Use scoped_guard to drop device_lock() for cxl_port
- Refactor __devm_cxl_add_port() to drop gotos
- Rename cxl_setup_parent_dport to cxl_dport_init_aer and
cxl_dport_map_regs() to cxl_dport_map_ras()
- Refactor cxl_dport_init_aer() to be more concise
- Remove duplicate host_bridge->native_aer checking in
cxl_dport_init_ras_reporting()
- Fix comment for cxl_query_cmd()"
* tag 'cxl-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
cxl: Add documentation to explain the shared link bandwidth calculation
cxl: Calculate region bandwidth of targets with shared upstream link
cxl: Preserve the CDAT access_coordinate for an endpoint
cxl: Fix comment regarding cxl_query_cmd() return data
cxl: Convert cxl_internal_send_cmd() to use 'struct cxl_mailbox' as input
cxl: Move mailbox related bits to the same context
cxl: move cxl headers to new include/cxl/ directory
cxl/region: Remove lock from memory notifier callback
cxl/pci: simplify the check of mem_enabled in cxl_hdm_decode_init()
cxl/pci: Check Mem_info_valid bit for each applicable DVSEC
cxl/pci: Remove duplicated implementation of waiting for memory_info_valid
cxl/pci: Fix to record only non-zero ranges
cxl/pci: Remove duplicate host_bridge->native_aer checking
cxl/pci: cxl_dport_map_rch_aer() cleanup
cxl/pci: Rename cxl_setup_parent_dport() and cxl_dport_map_regs()
cxl/port: Refactor __devm_cxl_add_port() to drop goto pattern
cxl/port: Use scoped_guard()/guard() to drop device_lock() for cxl_port
cxl/port: Use __free() to drop put_device() for cxl_port
cxl: Remove duplicate included header file core.h
tools/testing/cxl: Use dev_is_platform()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. 13 are cc:stable.
There's a focus on fixes for the memfd_pin_folios() work which was
added into 6.11. Apart from that, the usual shower of singleton fixes"
* tag 'mm-hotfixes-stable-2024-09-27-09-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
ocfs2: fix uninit-value in ocfs2_get_block()
zram: don't free statically defined names
memory tiers: use default_dram_perf_ref_source in log message
Revert "list: test: fix tests for list_cut_position()"
kselftests: mm: fix wrong __NR_userfaultfd value
compiler.h: specify correct attribute for .rodata..c_jump_table
mm/damon/Kconfig: update DAMON doc URL
mm: kfence: fix elapsed time for allocated/freed track
ocfs2: fix deadlock in ocfs2_get_system_file_inode
ocfs2: reserve space for inline xattr before attaching reflink tree
mm: migrate: annotate data-race in migrate_folio_unmap()
mm/hugetlb: simplify refs in memfd_alloc_folio
mm/gup: fix memfd_pin_folios alloc race panic
mm/gup: fix memfd_pin_folios hugetlb page allocation
mm/hugetlb: fix memfd_pin_folios resv_huge_pages leak
mm/hugetlb: fix memfd_pin_folios free_huge_pages leak
mm/filemap: fix filemap_get_folios_contig THP panic
mm: make SPLIT_PTE_PTLOCKS depend on SMP
tools: fix shared radix-tree build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Fix objtool about do_syscall() and Clang
- Enable generic CPU vulnerabilites support
- Enable ACPI BGRT handling
- Rework CPU feature probe from CPUCFG/IOCSR
- Add ARCH_HAS_SET_MEMORY support
- Add ARCH_HAS_SET_DIRECT_MAP support
- Improve hardware page table walker
- Simplify _percpu_read() and _percpu_write()
- Add advanced extended IRQ model documentions
- Some bug fixes and other small changes
* tag 'loongarch-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
Docs/LoongArch: Add advanced extended IRQ model description
LoongArch: Remove posix_types.h include from sigcontext.h
LoongArch: Fix memleak in pci_acpi_scan_root()
LoongArch: Simplify _percpu_read() and _percpu_write()
LoongArch: Improve hardware page table walker
LoongArch: Add ARCH_HAS_SET_DIRECT_MAP support
LoongArch: Add ARCH_HAS_SET_MEMORY support
LoongArch: Rework CPU feature probe from CPUCFG/IOCSR
LoongArch: Enable ACPI BGRT handling
LoongArch: Enable generic CPU vulnerabilites support
LoongArch: Remove STACK_FRAME_NON_STANDARD(do_syscall)
LoongArch: Set AS_HAS_THIN_ADD_SUB as y if AS_IS_LLVM
LoongArch: Enable objtool for Clang
objtool: Handle frame pointer related instructions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"The first change by Gaosheng Cui removes unused declarations which
have been obsoleted since commit 5a4053b23262 ("sh: Kill off dead
boards.") and the second by his colleague Hongbo Li replaces the use
of the unsafe simple_strtoul() with the safer kstrtoul() function in
the sh interrupt controller driver code"
* tag 'sh-for-v6.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: intc: Replace simple_strtoul() with kstrtoul()
sh: Remove unused declarations for make_maskreg_irq() and irq_mask_register
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
I2C host fixes for v6.12-rc1
The DesignWare driver now has the correct ENABLE-ABORT sequence,
ensuring ABORT can always be sent when needed.
In the SynQuacer controller we now check for PCLK as an optional
clock, allowing ACPI to directly provide the clock rate.
The recent KEBA driver required a dependency fix in Kconfig.
The XIIC driver now has a corrected power suspend sequence.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"A second round of Xen related changes and features:
- a small fix of the xen-pciback driver for a warning issued by
sparse
- support PCI passthrough when using a PVH dom0
- enable loading the kernel in PVH mode at arbitrary addresses,
avoiding conflicts with the memory map when running as a Xen dom0
using the host memory layout"
* tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pvh: Add 64bit relocation page tables
x86/kernel: Move page table macros to header
x86/pvh: Set phys_base when calling xen_prepare_pvh()
x86/pvh: Make PVH entrypoint PIC for x86-64
xen: sync elfnote.h from xen tree
xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t
xen/privcmd: Add new syscall to get gsi from dev
xen/pvh: Setup gsi for passthrough device
xen/pci: Add a function to reset device for xen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- Misc VDO fixes
- Remove unused declarations dm_get_rq_mapinfo() and dm_zone_map_bio()
- Dm-delay: Improve kernel documentation
- Dm-crypt: Allow to specify the integrity key size as an option
- Dm-bufio: Remove pointless NULL check
- Small code cleanups: Use ERR_CAST; remove unlikely() around IS_ERR;
use __assign_bit
- Dm-integrity: Fix gcc 5 warning; convert comma to semicolon; fix
smatch warning
- Dm-integrity: Support recalculation in the 'I' mode
- Revert "dm: requeue IO if mapping table not yet available"
- Dm-crypt: Small refactoring to make the code more readable
- Dm-cache: Remove pointless error check
- Dm: Fix spelling errors
- Dm-verity: Restart or panic on an I/O error if restart or panic was
requested
- Dm-verity: Fallback to platform keyring also if key in trusted
keyring is rejected
* tag 'for-6.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm verity: fallback to platform keyring also if key in trusted keyring is rejected
dm-verity: restart or panic on an I/O error
dm: fix spelling errors
dm-cache: remove pointless error check
dm vdo: handle unaligned discards correctly
dm vdo indexer: Convert comma to semicolon
dm-crypt: Use common error handling code in crypt_set_keyring_key()
dm-crypt: Use up_read() together with key_put() only once in crypt_set_keyring_key()
Revert "dm: requeue IO if mapping table not yet available"
dm-integrity: check mac_size against HASH_MAX_DIGESTSIZE in sb_mac()
dm-integrity: support recalculation in the 'I' mode
dm integrity: Convert comma to semicolon
dm integrity: fix gcc 5 warning
dm: Make use of __assign_bit() API
dm integrity: Remove extra unlikely helper
dm: Convert to use ERR_CAST()
dm bufio: Remove NULL check of list_entry()
dm-crypt: Allow to specify the integrity key size as option
dm: Remove unused declaration and empty definition "dm_zone_map_bio"
dm delay: enhance kernel documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix a NULL pointer dereference introduced by the recent cleanups of
the command duration limits feature handling (me)
- Fix incorrect generation of the mode sense data for the
ALL_SUB_MPAGES page (me)
* tag 'ata-6.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix ata_msense_control() CDL page reporting
ata: libata-scsi: Fix ata_msense_control_spgt2()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of patches for the driver core code for 6.12-rc1.
This set is the one that caused the most delay on my side, due to lots
of last-minute reports of problems in the async shutdown feature that
was added. In the end, I've reverted all of the patches in that series
so we are back to "normal" and the patch set is being reworked for the
next merge window.
Other than the async shutdown patches that were reverted, included in
here are:
- minor driver core cleanups
- minor driver core bus and class api cleanups and simplifications
for some callbacks
- some const markings of structures
- other even more minor cleanups
All of these, including the last minute reverts, have been in
linux-next, but all of the reports of problems in linux-next were
before the reverts happened. After the reverts, all is good"
* tag 'driver-core-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
Revert "driver core: don't always lock parent in shutdown"
Revert "driver core: separate function to shutdown one device"
Revert "driver core: shut down devices asynchronously"
Revert "nvme-pci: Make driver prefer asynchronous shutdown"
Revert "driver core: fix async device shutdown hang"
driver core: fix async device shutdown hang
driver core: attribute_container: Remove unused functions
driver core: Trivially simplify ((struct device_private *)curr)->device->p to @curr
devres: Correclty strip percpu address space of devm_free_percpu() argument
driver core: Make parameter check consistent for API cluster device_(for_each|find)_child()
bus: fsl-mc: make fsl_mc_bus_type const
nvme-pci: Make driver prefer asynchronous shutdown
driver core: shut down devices asynchronously
driver core: separate function to shutdown one device
driver core: don't always lock parent in shutdown
platform: Make platform_bus_type constant
driver core: class: Check namespace relevant parameters in class_register()
driver:base:core: Adding a "Return:" line in comment for device_link_add()
drivers/base: Introduce device_match_t for device finding APIs
firmware_loader: Block path traversal
...
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Selecting CONFIG_OMAP2PLUS_MBOX while compile testing
causes a build failure:
WARNING: unmet direct dependencies detected for OMAP2PLUS_MBOX
Depends on [n]: MAILBOX [=y] && (ARCH_OMAP2PLUS || ARCH_K3)
Selected by [m]:
- TI_K3_M4_REMOTEPROC [=m] && REMOTEPROC [=y] && (ARCH_K3 || COMPILE_TEST [=y])
Using 'select' to force-enable another subsystem is generally
a mistake and causes problems such as this one, so change the
three drivers that link against this driver to use 'depends on'
instead, and ensure the driver itself can be compile tested
regardless of the platform.
When compile-testing without CONFIG_TI_SCI_PROTOCOL=m, there
is a chance for a link failure, so add a careful dependency
on that.
arm-linux-gnueabi-ld: drivers/remoteproc/ti_k3_m4_remoteproc.o: in function `k3_m4_rproc_probe':
ti_k3_m4_remoteproc.c:(.text.k3_m4_rproc_probe+0x76): undefined reference to `devm_ti_sci_get_by_phandle'
Fixes: ebcf9008a895 ("remoteproc: k3-m4: Add a remoteproc driver for M4F subsystem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 36ecbcab84d0 ("i2c: xiic: Implement power management")
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The KEBA I2C controller is only present on KEBA PLC devices. Hence add
a dependency on KEBA_CP500, to prevent asking the user about this driver
when configuring a kernel without KEBA CP500 system FPGA support.
Fixes: c7e08c816cd2fdf8 ("i2c: keba: Add KEBA I2C controller support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Gerhard Engleder <eg@keba.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
update workload mask after the setting.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3625
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Driver now clears VRAM on allocation. Bump the
driver version so mesa knows when it will get
cleared vram by default.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
SR-IOV fetches the vbios from VRAM in some cases.
Re-enable the VRAM path for dGPUs and rename the function
to make it clear that it is not IGP specific.
Fixes: 042658d17a54 ("drm/amdgpu: clean up vbios fetching code")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Tested-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Without setting dcc bit, there is ramdon PTE copy corruption on sdma 7.
so add this bit and update the packet format accordingly.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
|
|
When CONFIG_ZRAM_MULTI_COMP isn't set ZRAM_SECONDARY_COMP can hold
default_compressor, because it's the same offset as ZRAM_PRIMARY_COMP, so
we need to make sure that we don't attempt to kfree() the statically
defined compressor name.
This is detected by KASAN.
==================================================================
Call trace:
kfree+0x60/0x3a0
zram_destroy_comps+0x98/0x198 [zram]
zram_reset_device+0x22c/0x4a8 [zram]
reset_store+0x1bc/0x2d8 [zram]
dev_attr_store+0x44/0x80
sysfs_kf_write+0xfc/0x188
kernfs_fop_write_iter+0x28c/0x428
vfs_write+0x4dc/0x9b8
ksys_write+0x100/0x1f8
__arm64_sys_write+0x74/0xb8
invoke_syscall+0xd8/0x260
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xc8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
==================================================================
Link: https://lkml.kernel.org/r/20240923164843.1117010-1-andrej.skvortzov@gmail.com
Fixes: 684826f8271a ("zram: free secondary algorithms names")
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Closes: https://lore.kernel.org/lkml/57130e48-dbb6-4047-a8c7-ebf5aaea93f4@linux.vnet.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com>
Cc: Chris Li <chrisl@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Not a lot happening in EFI land this cycle.
- Prevent kexec from crashing on a corrupted TPM log by using a
memory type that is reserved by default
- Log correctable errors reported via CPER
- A couple of cosmetic fixes"
* tag 'efi-next-for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Remove redundant null pointer checks in efi_debugfs_init()
efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption
efi/cper: Print correctable AER information
efi: Remove unused declaration efi_initialize_iomem_resources()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
It looks like that most people are still traveling: both the ML volume
and the processing capacity are low.
Previous releases - regressions:
- netfilter:
- nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
- nf_tables: keep deleted flowtable hooks until after RCU
- tcp: check skb is non-NULL in tcp_rto_delta_us()
- phy: aquantia: fix -ETIMEDOUT PHY probe failure when firmware not
present
- eth: virtio_net: fix mismatched buf address when unmapping for
small packets
- eth: stmmac: fix zero-division error when disabling tc cbs
- eth: bonding: fix unnecessary warnings and logs from
bond_xdp_get_xmit_slave()
Previous releases - always broken:
- netfilter:
- fix clash resolution for bidirectional flows
- fix allocation with no memcg accounting
- eth: r8169: add tally counter fields added with RTL8125
- eth: ravb: fix rx and tx frame size limit"
* tag 'net-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
selftests/net: packetdrill: increase timing tolerance in debug mode
usbnet: fix cyclical race on disconnect with work queue
net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
virtio_net: Fix mismatched buf address when unmapping for small packets
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
r8169: add missing MODULE_FIRMWARE entry for RTL8126A rev.b
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and removals for
6.12-rc1.
Nothing exciting here, just slow, constant, forward progress in
removing code and cleaning up some old drivers, along with removing
one of them that was not being used anymore at all. In discussions
with some developers this past week, even more deletions will be
happening for the next major merge window, as we seems to have code
here that obviously no one is using anymore.
Along with the normal cleanups is the good vme_user code forward
progress, the one major bright spot in the staging subsystem for code
that people rely on, and is getting good development behind it.
Hopefully it can graduate out of staging "soon".
All of these changes have been in linux-next for a long time with no
reported problems"
* tag 'staging-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (141 commits)
staging: vt6655: Rename variable apTD1Rings
staging: vt6655: Rename variable apTD0Rings
staging: rtl8723bs: remove unused 'poll_cnt' from rtw_set_rpwm()
staging: rtl8723bs: remove unused cnt from recv_func()
staging: rtl8723bs: remove unused efuseValue from efuse_OneByteWrite()
staging: rtl8712: remove unused drvinfo_sz from update_recvframe_attrib
staging: vt6655: mac.h: Fix possible precedence issue in macros
staging: rtl8723bs: include: Remove spaces before tabs in rtw_security.h
staging: rtl8723bs: include: Fix trailing */ position in rtw_security.h
staging: rtl8723bs: include: Fix indent for else block struct in rtw_security.h
staging: rtl8723bs: include: Fix indent for struct _byte_ in rtw_security.h
staging: rtl8723bs: include: Fix use of tabs for indent in rtw_security.h
staging: rtl8723bs: include: Fix indent for switch block in rtw_security.h
staging: rtl8723bs: include: Fix indent for switch case in rtw_security.h
staging: rtl8723bs: include: Fix open brace position in rtw_security.h
staging: nvec: Use IRQF_NO_AUTOEN flag in request_irq()
staging: rtl8723bs: Remove unused file rtw_rf.c
staging: rtl8723bs: Remove unused function rtw_ch2freq
staging: rtl8723bs: Remove unused files rtw_debug.c and rtw_debug.h
staging: rtl8723bs: Remove unused function dump_4_regs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver updates for 6.12-rc1.
Nothing major in here, just nice forward progress in the slow cleanup
of the serial apis, and lots of other driver updates and fixes.
Included in here are:
- serial api updates from Jiri to make things more uniform and sane
- 8250_platform driver cleanups
- samsung serial driver fixes and updates
- qcom-geni serial driver fixes from Johan for the bizarre UART
engine that that chip seems to have. Hopefully it's in a better
state now, but hardware designers still seem to come up with more
ways to make broken UARTS 40+ years after this all should have
finished.
- sc16is7xx driver updates
- omap 8250 driver updates
- 8250_bcm2835aux driver updates
- a few new serial driver bindings added
- other serial minor driver updates
All of these have been in linux-next for a long time with no reported
problems"
* tag 'tty-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
tty: serial: samsung: Fix serial rx on Apple A7-A9
tty: serial: samsung: Fix A7-A11 serial earlycon SError
tty: serial: samsung: Use bit manipulation macros for APPLE_S5L_*
tty: rp2: Fix reset with non forgiving PCIe host bridges
serial: 8250_aspeed_vuart: Enable module autoloading
serial: qcom-geni: fix polled console corruption
serial: qcom-geni: disable interrupts during console writes
serial: qcom-geni: fix console corruption
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
serial: qcom-geni: fix false console tx restart
serial: qcom-geni: fix fifo polling timeout
tty: hvc: convert comma to semicolon
mxser: convert comma to semicolon
serial: 8250_bcm2835aux: Fix clock imbalance in PM resume
serial: sc16is7xx: convert bitmask definitions to use BIT() macro
serial: sc16is7xx: fix copy-paste errors in EFR_SWFLOWx_BIT constants
serial: sc16is7xx: remove SC16IS7XX_MSR_DELTA_MASK
serial: xilinx_uartps: Make cdns_rs485_supported static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt changes for 6.12-rc1.
Nothing "major" in here, except for a new 9p network gadget that has
been worked on for a long time (all of the needed acks are here)
Other than that, it's the usual set of:
- Thunderbolt / USB4 driver updates and additions for new hardware
- dwc3 driver updates and new features added
- xhci driver updates
- typec driver updates
- USB gadget updates and api additions to make some gadgets more
configurable by userspace
- dwc2 driver updates
- usb phy driver updates
- usbip feature additions
- other minor USB driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
sub: cdns3: Use predefined PCI vendor ID constant
sub: cdns2: Use predefined PCI vendor ID constant
USB: misc: yurex: fix race between read and write
USB: misc: cypress_cy7c63: check for short transfer
USB: appledisplay: close race between probe and completion handler
USB: class: CDC-ACM: fix race between get_serial and set_serial
usb: r8a66597-hcd: make read-only const arrays static
usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
usb: storage: ene_ub6250: Fix right shift warnings
usb: roles: Improve the fix for a false positive recursive locking complaint
locking/mutex: Introduce mutex_init_with_key()
locking/mutex: Define mutex_init() once
net/9p/usbg: fix CONFIG_USB_GADGET dependency
usb: xhci: fix loss of data on Cadence xHC
usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Jiri Kosina:
"A revert of Device Tree binding for Goodix SPI HID driver (while
keeping ACPI still available), as it conflicted with already existing
binding and the original submitter didn't respond in time with a fix.
We will be looking into ways how to reintroduce it properly (we have
to agree on a way how to handle cases where vendor uses the very same
product ID for I2C and SPI parts, leading to this kind conflict). But
before that is settled, let's revert the to unbreak everybody else
(Krzysztof Kozlowski)"
* tag 'hid-for-linus-2024092601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
dt-bindings: input: Revert "dt-bindings: input: Goodix SPI HID Touchscreen"
HID: hid-goodix: drop unsupported and undocumented DT part
|
|
Break the for loop immediately upon finding the target, making the
process more efficient.
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
omapdss_of_find_source_for_first_ep()
An of_node_put(ep) call was immediately used after a pointer check
for a of_graph_get_remote_port() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
syzbot has found a NULL pointer dereference bug in fbcon.
Here is the simplified C reproducer:
struct param {
uint8_t type;
struct tiocl_selection ts;
};
int main()
{
struct fb_con2fbmap con2fb;
struct param param;
int fd = open("/dev/fb1", 0, 0);
con2fb.console = 0x19;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
param.type = 2;
param.ts.xs = 0; param.ts.ys = 0;
param.ts.xe = 0; param.ts.ye = 0;
param.ts.sel_mode = 0;
int fd1 = open("/dev/tty1", O_RDWR, 0);
ioctl(fd1, TIOCLINUX, ¶m);
con2fb.console = 1;
con2fb.framebuffer = 0;
ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb);
return 0;
}
After calling ioctl(fd1, TIOCLINUX, ¶m), the subsequent ioctl(fd, FBIOPUT_CON2FBMAP, &con2fb)
causes the kernel to follow a different execution path:
set_con2fb_map
-> con2fb_init_display
-> fbcon_set_disp
-> redraw_screen
-> hide_cursor
-> clear_selection
-> highlight
-> invert_screen
-> do_update_region
-> fbcon_putcs
-> ops->putcs
Since ops->putcs is a NULL pointer, this leads to a kernel panic.
To prevent this, we need to call set_blitting_type() within set_con2fb_map()
to properly initialize ops->putcs.
Reported-by: syzbot+3d613ae53c031502687a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3d613ae53c031502687a
Tested-by: syzbot+3d613ae53c031502687a@syzkaller.appspotmail.com
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- virtio-balloon supports new stats
- vdpa supports setting mac address
- vdpa/mlx5 suspend/resume as well as MKEY ops are now faster
- virtio_fs supports new sysfs entries for queue info
- virtio/vsock performance has been improved
And fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vsock/virtio: avoid queuing packets when intermediate queue is empty
vsock/virtio: refactor virtio_transport_send_pkt_work
fw_cfg: Constify struct kobj_type
vdpa/mlx5: Postpone MR deletion
vdpa/mlx5: Introduce init/destroy for MR resources
vdpa/mlx5: Rename mr_mtx -> lock
vdpa/mlx5: Extract mr members in own resource struct
vdpa/mlx5: Rename function
vdpa/mlx5: Delete direct MKEYs in parallel
vdpa/mlx5: Create direct MKEYs in parallel
MAINTAINERS: add virtio-vsock driver in the VIRTIO CORE section
virtio_fs: add sysfs entries for queue information
virtio_fs: introduce virtio_fs_put_locked helper
vdpa: Remove unused declarations
vdpa/mlx5: Parallelize VQ suspend/resume for CVQ MQ command
vdpa/mlx5: Small improvement for change_num_qps()
vdpa/mlx5: Keep notifiers during suspend but ignore
vdpa/mlx5: Parallelize device resume
vdpa/mlx5: Parallelize device suspend
vdpa/mlx5: Use async API for vq modify commands
...
|
|
rejected
If enabled, we fallback to the platform keyring if the trusted keyring doesn't have
the key used to sign the roothash. But if pkcs7_verify() rejects the key for other
reasons, such as usage restrictions, we do not fallback. Do so.
Follow-up for 6fce1f40e95182ebbfe1ee3096b8fc0b37903269
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Maxim Suhanov reported that dm-verity doesn't crash if an I/O error
happens. In theory, this could be used to subvert security, because an
attacker can create sectors that return error with the Write Uncorrectable
command. Some programs may misbehave if they have to deal with EIO.
This commit fixes dm-verity, so that if "panic_on_corruption" or
"restart_on_corruption" was specified and an I/O error happens, the
machine will panic or restart.
This commit also changes kernel_restart to emergency_restart -
kernel_restart calls reboot notifiers and these reboot notifiers may wait
for the bio that failed. emergency_restart doesn't call the notifiers.
Reported-by: Maxim Suhanov <dfirblog@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
|
|
Fixed some confusing spelling errors that were currently identified,
the details are as follows:
-in the code comments:
dm-cache-target.c: 1371: exclussive ==> exclusive
dm-raid.c: 2522: repective ==> respective
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Smatch reported following:
'''
drivers/md/dm-cache-target.c:3204 parse_cblock_range() warn: sscanf doesn't return error codes
drivers/md/dm-cache-target.c:3217 parse_cblock_range() warn: sscanf doesn't return error codes
'''
Sscanf doesn't return negative values at all.
Signed-off-by: Dipendra Khadka <kdipendra88@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The function simple_strtoul() performs no error checking
in scenarios where the input value overflows the intended
output variable.
We can replace the use of simple_strtoul() with the safer
alternative kstrtoul(). This also allows us to print an
error message in case of failure.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
Commit 6eab0ce6e1c6 ("soc: Add SoC driver for Cirrus ep93xx") adds the
config EP93XX_SOC referring to the config EP93XX_SOC_COMMON.
Within the same patch series of the commit above, the commit 046322f1e1d9
("ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms") then removes the
config EP93XX_SOC_COMMON. With that the reference to this config is
obsolete.
Simplify the expression in the EP93XX_SOC config definition.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 5fabb01207a2 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.
When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().
After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.
Fixes: 5fabb01207a2 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the virtio-net driver will perform a pre-dma-mapping for
small or mergeable RX buffer. But for small packets, a mismatched address
without VIRTNET_RX_PAD and xdp_headroom is used for unmapping.
That will result in unsynchronized buffers when SWIOTLB is enabled, for
example, when running as a TDX guest.
This patch unifies the address passed to the virtio core as the address of
the virtnet header and fixes the mismatched buffer address.
Changes from v2: unify the buf that passed to the virtio core in small
and merge mode.
Changes from v1: Use ctx to get xdp_headroom.
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Wenbo Li <liwenbo.martin@bytedance.com>
Signed-off-by: Jiahui Cen <cenjiahui@bytedance.com>
Signed-off-by: Ying Fang <fangying.tommy@bytedance.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Some driver specific fixes that came in during the merge window.
Lorenzo Bianconi did some extra testing on the recently added arioha
driver and found some issues, Alexander Dahl fixed some issues with
signal delays in the Atmel QSPI driver and Jinjie Ruan has been fixing
some nits with runtime PM cleanup"
* tag 'spi-fix-v6.12-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atmel-quadspi: Avoid overwriting delay register settings
spi: airoha: remove read cache in airoha_snand_dirmap_read()
spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
spi: atmel-quadspi: Undo runtime PM changes at driver exit time
spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
spi: airoha: fix dirmap_{read,write} operations
|
