summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2020-12-23drm/amd/pm: support overdrive vddgfx offset setting(V2)Evan Quan
This is supported by Sienna Cichlid, Navy Flounder and Dimgrey Cavefish. For these ASICs, the target voltage calculation can be illustrated by "voltage = voltage calculated from v/f curve + overdrive vddgfx offset". V2: limit the smu_version check for Sienna Cichlid only Here are some sample usages about this new OD setting: 1. Check current vddgfx offset setting by cat /sys/class/drm/card0/device/pp_od_clk_voltage ... ... OD_VDDGFX_OFFSET: 0mV ... ... 2. Set new vddgfx offset by echo "vo 10" > /sys/class/drm/card0/device/pp_od_clk_voltage cat /sys/class/drm/card0/device/pp_od_clk_voltage ... ... OD_VDDGFX_OFFSET: 10mV ... ... 3. Commit the new setting by echo "c" > /sys/class/drm/card0/device/pp_od_clk_voltage Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: enable Sienna Cichlid overdrive supportEvan Quan
Enable Sienna Cichlid gfxclk/uclk overdrive support. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: populate Sienna Cichlid default overdrive table settingsEvan Quan
Populate the bootup overdrive table settings. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: Add interface for request WGPsJinzhou Su
When user specifies a reduced WGP(CU) config via disalbe_cu module parameter, this does not disable the clocks which uses additional power. This interface send active WGP number to SMU and SMU will cooperate with RLC to power off relative WGPs. v2: Add request active WGPs in Vangogh smu post init. Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/pm: add pptable_funcs documentation (v3)Ryan Taylor
Documents the hooks in struct pptable_funcs. v2: Improved documentation accuracy. v3: Improved set_default_od_settings() definition. Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: don't create ih ring 1 and ring 2 for APUHawking Zhang
APUs don't support ih ring 1 and ring 2. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: drop ih reroute function from psp v11Hawking Zhang
For all the ASICs that integrate psp v11, vega20 doesn't support ih reroute. arcturus and later will allow kernel driver to program ih_cfg_index/data through mmio directly. navi1x and onwards will only support grb_ih_set command in sriov configuration. psp_v11_0_reroute_ih is not needed any more. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: drop IH_CHICKEN programming from vega10 ih blockHawking Zhang
except for RENOIR, it is not correct to have IH_CHICKEN programming in vega10 ih block. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: correct ih_chicken programming for vega10/vega20 ih blocksHawking Zhang
IH_CHICKEN.MC_SPACE_FBPA_ENABLE field is only valid when IH_RB_CNTL.MC_SPACE is programed to 0x3, frame buffer physical address. For both bus address and gpu virtual address, don't program MC_SPACE_FBPA_ENABLE field Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: retire the vega20 code path from navi10 ih blockHawking Zhang
already switched to vega20 ih block for vega20 and arcturus. no need to add vega20 support in navi10 ih block Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to vega20 ih block for vega20/arcturusHawking Zhang
replace navi10 ih block with vega20 ih block for vega20 and arcturus Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: reroute vmc/utcl2 interrupts to ih ring 1 for arcturusHawking Zhang
in case page faults overwhlem the interrupt handlers and the driver lost the valuable interrupt information Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: create vega20 ih blocksHawking Zhang
vega20 ih blocks will be used for vega20/arcturus Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add osssys v4_2 ip headers (v2)Hawking Zhang
v1: add osssys v4_2 register offset and shift masks header files. vega20 and arcturus will refer to these ip headers. (Hawking) v2: clean up osssys v4_2 registers (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
2020-12-23drm/amdgpu: switch to common decode iv helperHawking Zhang
The iv format is the same for all the soc15 adpater and onwards and can share a common function to decode iv. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add a helper function to decode ivHawking Zhang
since from soc15, all the chips share the same iv format. create a common helper to decode iv Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: use cached ih rb control reg offsets for navi10Hawking Zhang
all the ih rb control register offsets are cached at the beginning of navi10 ih_sw_init. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_enable_ring for navi10Hawking Zhang
use navi10_ih_enable_ring to enable all the available ring buffers for navi1x and onwards Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_toggle_interrupts for navi10Hawking Zhang
replace ih_enable_interrupts and ih_disable_interrupts with ih_toggle_interrupts Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_init_register_offset for navi10Hawking Zhang
Initialize ih control registers offset through helper function navi10_ih_init_register_offset. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to toggle ih ring interrupts for navi10Hawking Zhang
navi10_ih_toggle_ring_interrupts will be used to enable/disable an ih ring interrupts for navi1x and onwards Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to enable an ih ring for navi10Hawking Zhang
navi10_ih_enable_ring will be used to enable an ih ring for navi1x and onwards Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to init ih ring regs for navi10Hawking Zhang
navi10_ih_init_register_offset will be used to init register offset for all the available ih rings Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: correct ih cg programming for vega10 ih blockHawking Zhang
vega10/12 and RAVEN don't support soft override ih_buffer_mem_clk. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: use cached ih rb control reg offsets for vega10Hawking Zhang
all the ih rb control register offsets are cached at the beginning of ih_sw_init. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_enable_ring for vega10Hawking Zhang
use vega10_ih_enable_ring to enable all the available ring buffers for vega10/12, RAVEN series and RENOIR APUs Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_toggle_interrupts for vega10Hawking Zhang
replace ih_enable_interrupts and ih_disable_interrupts with ih_toggle_interrupts Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: switch to ih_init_register_offset for vega10Hawking Zhang
Initialize ih control registers offset through helper function vega10_ih_init_register_offset. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to toggle ih ring interrupts for vega10Hawking Zhang
vega10_ih_toggle_ring_interrupts will be used to enable/disable an ih ring interrupts for vega10/12, RAVEN series and RENOIR APUs Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to enable an ih ring for vega10Hawking Zhang
vega10_ih_enable_ring will be used to enable an ih ring for vega10/12, RAVEN series and RENOIR. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add helper to init ih ring regs for vega10Hawking Zhang
vega10_ih_init_register_offset will be used to init register offset for all the available ih rings Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: add amdgpu_ih_regs structureHawking Zhang
amdgpu_ih_regs holds all the registers for an ih ring Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Fix memory leaks in S3 resumeStylon Wang
EDID parsing in S3 resume pushes new display modes to probed_modes list but doesn't consolidate to actual mode list. This creates a race condition when amdgpu_dm_connector_ddc_get_modes() re-initializes the list head without walking the list and results in memory leak. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=209987 Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-23drm/amdgpu: Fix a copy-pasta commentAlex Deucher
This is not a scsi driver. Reviewed-by: Nirmoy Das <nirmoy.das@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amdgpu: only set DP subconnector type on DP and eDP connectorsAlex Deucher
Fixes a crash in drm_object_property_set_value() because the property is not set for internal DP ports that connect to a bridge chips (e.g., DP to VGA or DP to LVDS). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739 Fixes: 65bf2cf95d3ade ("drm/amdgpu: utilize subconnector property for DP through atombios") Tested-By: Kris Karas <bugs-a17@moonlit-rail.com> Cc: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
2020-12-23drm/amd/pm: bump Sienna Cichlid smu_driver_if version to match latest pmfwEvan Quan
This can suppress the annoying but unharmful prompts. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: add getter routine to retrieve mpcc muxJosip Pavic
[Why & How] Add function to identify which MPCC is providing input to a specified OPP Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: always program DPPDTO unless not safe to lowerJake Wang
[Why] We defer clock updates to after pipes have been programmed. In some instances we use DPPCLK that have been previously set to be "unused". This results in a brief window of time where underflow could occur. [How] During prepare bandwidth allow rn_update_clocks_update_dpp_dto to check each instance and compare previous clock to new clock. If new clock is higher than previous clock, program DPPDTO. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: [FW Promotion] Release 0.0.47Yongqiang Sun
- restore lvtma_pwrseq_delay2 from vbios integrated info table - restore MVID/NVID after power up. - Enable timer wake up mask when enable timer interrupt. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: updated wm table for RenoirJake Wang
[Why] For certain timings, Renoir may underflow due to sr exit latency being too slow. [How] Updated wm table for renoir. Signed-off-by: Jake Wang <haonan.wang2@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Acquire DSC during split stream for ODM only if top_pipeSung Lee
[WHY] DSC should only be acquired per OPP. Therefore, DSC should only be acquired for the top_pipe when ODM is enabled. Not doing this check may lead to acquiring more DSC's than needed when doing MPO + ODM Combine. [HOW] Only acquire DSC if pipe is top_pipe. Signed-off-by: Sung Lee <sung.lee@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Multi-display underflow observedAric Cyr
[Why] FP2 programming not happening when topology changes occur with multiple displays. [How] Ensure FP2 is programmed whenever global sync changes occur but wait for VACTIVE first to avoid underflow. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Remove unnecessary NULL checkEryk Brol
[Why] new_crtc_state is already dereferenced earlier in the function [How] Remove the check Signed-off-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Update RN/VGH active display count workaroundMichael Strauss
[WHY] Virtual signals were previously counted as a workaround to S0i2 hang which is fixed on Renoir. This blocks S0i3 diags testing. [HOW] Stop counting virtual signals as S0i2 hang is fixed on Renoir. Signed-off-by: Michael Strauss <michael.strauss@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: change SMU repsonse timeout to 2s.Yongqiang Sun
[Why] there is some garbage showing up during reboot test. Reason: SMU might handle display driver msg defered and driver will send next msg to SMU after 10ms timeout, once SMU FW handle previous msg, parameters are changed to next one, which result in a wrong value be programmed. [How] Extend timeout to 2s so SMU will have enough time to handle driver msg. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: gradually ramp ABM intensityRizvi
[Why] Need driver to pass values of backlight ramp start and ramp reduction so that intensity can be ramped down appropriately. [How] Using abm_parameters structure to get these values from driver. Signed-off-by: Rizvi <syerizvi@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: To modify the condition in indicating branch deviceMartin Tsai
[why] The sink count change HPD_IRQ will be ignored if the branch device has only DP DFP. [how] To remove the port type restriction. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Modify the hdcp device count check conditionMartin Tsai
[why] Some MST display may not report the internal panel to DEVICE_COUNT, that makes the check condition always failed. [how] To update this condition with the reported device count + 1 (because the immediate repeater's internal panel is possibly not included in DEVICE_COUNT) Signed-off-by: Martin Tsai <martin.tsai@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: Interfaces for hubp blank and soft resetWesley Chalmers
[WHY] HUBP blanking sequence on DCN30 requires us to check if HUBP is in blank and also toggle HUBP_DISABLE, which should instead be called HUBP_SOFT_RESET for what it does in HW. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-23drm/amd/display: handler not correctly checked at remove_irq_handlerQingqing Zhuo
[why] handler is supposedly passed in as a function pointer; however, the entire struct amdgpu_dm_irq_handler_data gets from the list is used to check match. [how] use the interrupt_handler within amdgpu_dm_irq_handler_data for checking match. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Acked-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-28 01:38:02 +0000