summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-09-02misc: microchip: pci1xxxx: Add power management functions - suspend & resume ↵Kumaravel Thiagarajan
handlers. Power event handlers suspend and resume are invoked by the operating system to notify the driver about the power events. Wakeup is enabled before entering suspend and disabled after resuming. Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Link: https://lore.kernel.org/r/20220824200047.150308-6-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-02misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions ↵Kumaravel Thiagarajan
irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip. The helper functions irq_set_type, irq_mask, irq_unmask and irq_ack configure the interrupt type, mask, unmask and acknowledge the interrupts. Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Link: https://lore.kernel.org/r/20220824200047.150308-5-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-02misc: microchip: pci1xxxx: Add functions to configure gpio pins as input / ↵Kumaravel Thiagarajan
output, get status, handle I/O for gpio pins. direction_input and direction_output functions configures a gpio pin as input and output respectively. get_direction function returns if a gpio pin is output or input. get function returns the value of a gpio pin whereas set function assigns output value for a gpio pin. Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Link: https://lore.kernel.org/r/20220824200047.150308-4-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-02misc: microchip: pci1xxxx: load gpio driver for the gpio controller ↵Kumaravel Thiagarajan
auxiliary device enumerated by the auxiliary bus driver. PIO function's auxiliary bus driver enumerates separate child devices for GPIO controller and OTP/EEPROM interface. This gpio driver implemented based on the gpio framework is loaded for the gpio auxiliary device. Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Link: https://lore.kernel.org/r/20220824200047.150308-3-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-02misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in ↵Kumaravel Thiagarajan
the multi-function endpoint of pci1xxxx device. pci1xxxx is a PCIe switch with a multi-function endpoint on one of its downstream ports. PIO function is one of the functions in the multi-function endpoint. PIO function combines a GPIO controller and also an interface to program pci1xxxx's OTP & EEPROM. This auxiliary bus driver is loaded for the PIO function and separate child devices are enumerated for GPIO controller and OTP/EEPROM interface. Signed-off-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Link: https://lore.kernel.org/r/20220824200047.150308-2-kumaravel.thiagarajan@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01parport: add support for Netmos device 9900Alexander Baehr
The Netmos parallel port 9901 was already supported but the device 9900 was not. This patch adds the required settings for it and was successfully tested with the Netmos device 9900. Signed-off-by: Alexander Baehr <abaehr@osadl.org> Link: https://lore.kernel.org/r/20220806113334.264598686@osadl.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01uio: dfl: add IOPLL user-clock feature idPeter Colberg
Add a Device Feature List (DFL) feature id [1] for the configurable IOPLL user clock source, which can be used to configure the clock speeds that are used for RTL logic that is programmed into the Partial Reconfiguration (PR) region of an FPGA. The IOPLL user-space driver [2] contains frequency tables [3] with the specific user clock frequencies for an implementation. For each desired frequency, the table values are produced by calling the quartus tool, the same tool that generates the IOPLL RTL logic. The quartus tool allows the RTL designer to select different options which can affect the table values. The table-driven, user-space driver allows for supporting future, modified implementations and provides users the ability to modify the IOPLL implementation. [1] https://github.com/OPAE/dfl-feature-id [2] https://github.com/OPAE/opae-sdk/blob/a494f54a9f0356d0425edbff228f0254a4c70303/libraries/plugins/xfpga/usrclk/fpga_user_clk.c [3] https://github.com/OPAE/opae-sdk/blob/a494f54a9f0356d0425edbff228f0254a4c70303/libraries/plugins/xfpga/usrclk/fpga_user_clk_freq.h Acked-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Peter Colberg <peter.colberg@intel.com> Link: https://lore.kernel.org/r/20220831204851.4683-1-peter.colberg@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01speakup_soft: Add direct module parameterSamuel Thibault
For non-english speech synthesis, it is often desirable to make speakup_soft pass text directly. Adding a direct parameter to the speakup_soft module allows to easily set that at boot, rather than setting the sys variable after boot. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20220829203625.6s6x57miowu4p664@begin Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01speakup: Notify synthesizers of the punctuation level changeSamuel Thibault
Even if speakup does the filtering itself, it does not filter out A_PUNC characters (because these are needed e.g. for prosody), so we have to tell synthesizers whether they should filter them out or not. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20220823222515.412752202@ens-lyon.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01speakup-dummy: Add support for PUNCT variableSamuel Thibault
This allows to debug the update of the punctuation level. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> =================================================================== Link: https://lore.kernel.org/r/20220823222514.929670068@ens-lyon.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01ipack: Check dev_set_name() return valueBo Liu
It's possible that dev_set_name() returns -ENOMEM, catch and handle this. Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Signed-off-by: Bo Liu <liubo03@inspur.com> Link: https://lore.kernel.org/r/20220805091057.19951-1-liubo03@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01misc: ocxl: fix possible refcount leak in afu_ioctl()Hangyu Hua
eventfd_ctx_put need to be called to put the refcount that gotten by eventfd_ctx_fdget when ocxl_irq_set_handler fails. Fixes: 060146614643 ("ocxl: move event_fd handling to frontend") Acked-by: Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220824082600.36159-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01virt: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210120.7565-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01misc: move from strlcpy with unused retval to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210031.7036-1-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01misc: fastrpc: Use USER_PD define in fastrpc_get_info_from_dspAbel Vesa
There are defines for each type of protection domain now. Use the USER_PD instead of magic value in fastrpc_get_info_from_dsp. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Amol Maheshwari <amahesh@qti.qualcomm.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20220816105528.3222763-1-abel.vesa@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01misc: bcm_vk: Remove usage of deprecated functionsBreno Leitao
ida_simple_get() and ida_simple_remove() functions are deprecated now. These functions were replaced by ida_alloc() and ida_free() respectively. This patch modernize bcm_vk to use the replacement functions. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20220812094717.4097179-1-leitao@debian.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01misc: bcm-vk: Specify the minimum number of IRQ vecsBreno Leitao
During bcm_vk_probe(), pci_alloc_irq_vectors() is called passing the number of IRQ vectors as 1, but, later, check how many IRQ vectors it got, and fails if it is smaller than VK_MSIX_IRQ_MIN_REQ. The most appropriated way to do it is setting the 'min_vecs' param as VK_MSIX_IRQ_MIN_REQ, instead of one. pci_alloc_irq_vectors() should know the requirements when called. The test was done by just loading this module on a machine with a Valkyrie offload engine hardware. Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20220812094011.4064729-1-leitao@debian.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01binderfs: rework superblock destructionAl Viro
So far we relied on .put_super = binderfs_put_super() to destroy info we stashed in sb->s_fs_info. This gave us the required ordering between ->evict_inode() and sb->s_fs_info destruction. But the current implementation of binderfs_fill_super() has a memory leak in the rare circumstance that d_make_root() fails because ->put_super() is only called when sb->s_root is initialized. Fix this by removing ->put_super() and simply do all that work in binderfs_kill_super(). Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org> Link: https://lore.kernel.org/r/20220823095339.853371-1-brauner@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01binderfs: remove unused INTSTRLEN macroCarlos Llamas
Fix the following W=1 build error: drivers/android/binderfs.c:42: error: macro "INTSTRLEN" is not used [-Werror=unused-macros] 42 | #define INTSTRLEN 21 | No functional changes in this patch. Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220829201254.1814484-8-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01binder: remove unused binder_alloc->buffer_freeCarlos Llamas
The ->buffer_free member was introduced in the first revision of the driver under staging but it appears like it was never actually used according to git's history. Remove it from binder_alloc. Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220829201254.1814484-6-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01binder: fix trivial kernel-doc typoCarlos Llamas
Correct the misspelling of 'invariant' in kernel-doc section. No functional changes in this patch. Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org> Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220829201254.1814484-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-14Merge tag 'for-linus-6.0-rc1b-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - fix the handling of the "persistent grants" feature negotiation between Xen blkfront and Xen blkback drivers - a cleanup of xen.config and adding xen.config to Xen section in MAINTAINERS - support HVMOP_set_evtchn_upcall_vector, which is more compliant to "normal" interrupt handling than the global callback used up to now - further small cleanups * tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections xen: remove XEN_SCRUB_PAGES in xen.config xen/pciback: Fix comment typo xen/xenbus: fix return type in xenbus_file_read() xen-blkfront: Apply 'feature_persistent' parameter when connect xen-blkback: Apply 'feature_persistent' parameter when connect xen-blkback: fix persistent grants negotiation x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
2022-08-13Merge tag 'i2c-for-5.20-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: - two driver fixes for issues introduced this cycle - one trivial driver improvement regarding ACPI - more DTS conversion and additions - documentation updates - subsystem-wide move from strlcpy to strscpy * tag 'i2c-for-5.20-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: docs: i2c: i2c-sysfs: fix hyperlinks docs: i2c: i2c-sysfs: improve wording docs: i2c: instantiating-devices: add syntax coloring to dts and C blocks docs: i2c: smbus-protocol: improve DataLow/DataHigh definition docs: i2c: i2c-protocol: remove unused legend items docs: i2c: i2c-protocol,smbus-protocol: remove nonsense words docs: i2c: i2c-protocol: update introductory paragraph i2c: move core from strlcpy to strscpy i2c: move drivers from strlcpy to strscpy i2c: kempld: Support ACPI I2C device declaration i2c: mediatek: add i2c compatible for MT8188 dt-bindings: i2c: update bindings for mt8188 soc i2c: microchip-corei2c: fix erroneous late ack send dt-bindings: i2c: qcom,i2c-cci: convert to dtschema i2c: qcom-geni: Fix GPI DMA buffer sync-back
2022-08-13Merge tag 'ntb-5.20' of https://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "Non-Transparent Bridge updates. Fix of heap data and clang warnings, support for a new Intel NTB device, and NTB EndPoint Function (EPF) support and the various fixes for that" * tag 'ntb-5.20' of https://github.com/jonmason/ntb: MAINTAINERS: add PCI Endpoint NTB drivers to NTB files NTB: EPF: Tidy up some bounds checks NTB: EPF: Fix error code in epf_ntb_bind() PCI: endpoint: pci-epf-vntb: reduce several globals to statics PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init() PCI: endpoint: Fix Kconfig dependency NTB: EPF: set pointer addr to null using NULL rather than 0 Documentation: PCI: extend subheading underline for "lspci output" section Documentation: PCI: Use code-block block for scratchpad registers diagram Documentation: PCI: Add specification for the PCI vNTB function device PCI: endpoint: Support NTB transfer between RC and EP NTB: epf: Allow more flexibility in the memory BAR map method PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address ntb: intel: add GNR support for Intel PCIe gen5 NTB NTB: ntb_tool: uninitialized heap data in tool_fn_write() ntb: idt: fix clang -Wformat warnings
2022-08-13Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and trivial updates. The major new core update is a change to the way device, target and host reference counting is done to try to make it more robust (this change has soaked for a while to try to winkle out any bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix typo 'the the' in comment scsi: megaraid_sas: Remove redundant variable cmd_type scsi: FlashPoint: Remove redundant variable bm_int_st scsi: zfcp: Fix missing auto port scan and thus missing target ports scsi: core: Call blk_mq_free_tag_set() earlier scsi: core: Simplify LLD module reference counting scsi: core: Make sure that hosts outlive targets scsi: core: Make sure that targets outlive devices scsi: ufs: ufs-pci: Correct check for RESET DSM scsi: target: core: De-RCU of se_lun and se_lun acl scsi: target: core: Fix race during ACL removal scsi: ufs: core: Correct ufshcd_shutdown() flow scsi: ufs: core: Increase the maximum data buffer size scsi: lpfc: Check the return value of alloc_workqueue()
2022-08-13Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request - print nvme connect Linux error codes properly (Amit Engel) - fix the fc_appid_store return value (Christoph Hellwig) - fix a typo in an error message (Christophe JAILLET) - add another non-unique identifier quirk (Dennis P. Kliem) - check if the queue is allocated before stopping it in nvme-tcp (Maurizio Lombardi) - restart admin queue if the caller needs to restart queue in nvme-fc (Ming Lei) - use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang Xiaoxu) - __alloc_disk_node() error handling fix (Rafael) * tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block: block: Do not call blk_put_queue() if gendisk allocation fails nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70 nvme-tcp: check if the queue is allocated before stopping it nvme-fabrics: Fix a typo in an error message nvme-fabrics: parse nvme connect Linux error codes nvmet-auth: use kmemdup instead of kmalloc + memcpy nvme-fc: fix the fc_appid_store return value nvme-fc: restart admin queue if the caller needs to restart queue
2022-08-12Merge tag 'riscv-for-linus-5.20-mw2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "There's still a handful of new features in here, but there are a lot of fixes/cleanups as well: - Support for the Zicbom extension for explicit cache-block management, along with the necessary bits to make the non-standard cache management ops on the Allwinner D1 function - Support for the Zihintpause extension, which codifies a go-slow instruction used for cpu_relax() - Support for the Sstc extension for supervisor-mode timer/counter management - Many device tree fixes and cleanups, including a large set for the Canaan device trees - A handful of fixes and cleanups for the PMU driver" * tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits) dt-bindings: gpio: sifive: add gpio-line-names wireguard: selftests: set CONFIG_NONPORTABLE on riscv32 RISC-V: KVM: Support sstc extension RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32 RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details riscv:uprobe fix SR_SPIE set/clear handling dt-bindings: riscv: fix SiFive l2-cache's cache-sets riscv: ensure cpu_ops_sbi is declared RISC-V: cpu_ops_spinwait.c should include head.h RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h> riscv: dts: starfive: correct number of external interrupts riscv: dts: sifive unmatched: Add PWM controlled LEDs riscv/purgatory: Omit use of bin2c riscv/purgatory: hard-code obj-y in Makefile ...
2022-08-12Merge tag 'rtc-6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "New drivers: - Microchip PolarFire - Nuvoton NCT3018Y - TI K3 RTC Subsystem: - Replace flush_scheduled_work() with flush_work() - Remove deprecated ida_simple_get()/ida_simple_remove() calls Drivers: - use simple i2c probe where possible - sun6i: add R329 support - zynqmp: add calibration support - vr41xx: remove unused driver" * tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: spear: set range max rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 rtc: zynqmp: initialize fract_tick rtc: Add NCT3018Y real time clock driver dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock dt-bindings: rtc: nxp,pcf85063: Convert to DT schema dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt' rtc: rx8025: fix 12/24 hour mode detection on RX-8035 rtc: cros-ec: Only warn once in .remove() about notifier_chain problems rtc: vr41xx: remove driver rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler() rtc: rv8803: fix missing unlock on error in rv8803_set_time() rtc: zynqmp: Add calibration set and get support rtc: zynqmp: Updated calibration value dt-bindings: rtc: zynqmp: Add clock information rtc: sun6i: add support for R329 RTC rtc: Directly use ida_alloc()/free() rtc: Introduce ti-k3-rtc dt-bindings: rtc: Add TI K3 RTC description dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section ...
2022-08-12Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: - A huge patchset supporting vq resize using the new vq reset capability - Features, fixes, and cleanups all over the place * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits) vdpa/mlx5: Fix possible uninitialized return value vdpa_sim_blk: add support for discard and write-zeroes vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests vdpa_sim_blk: check if sector is 0 for commands other than read or write vdpa_sim: Implement suspend vdpa op vhost-vdpa: uAPI to suspend the device vhost-vdpa: introduce SUSPEND backend feature bit vdpa: Add suspend operation virtio-blk: Avoid use-after-free on suspend/resume virtio_vdpa: support the arg sizes of find_vqs() vhost-vdpa: Call ida_simple_remove() when failed vDPA: fix 'cast to restricted le16' warnings in vdpa.c vDPA: !FEATURES_OK should not block querying device config space vDPA/ifcvf: support userspace to query features and MQ of a management device vDPA/ifcvf: get_config_size should return a value no greater than dev implementation vhost scsi: Allow user to control num virtqueues vhost-scsi: Fix max number of virtqueues vdpa/mlx5: Support different address spaces for control and data vdpa/mlx5: Implement susupend virtqueue callback ...
2022-08-12Merge tag 'for-v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "No core patches, only driver updates: - pwr-mlxbf: new reset driver for Mellanox BlueField - at91-reset: SAMA7G5 support - ab8500: continue refurbishing - misc minor fixes" * tag 'for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits) power: supply: olpc_battery: Hold the reference returned by of_find_compatible_node power: supply: ab8500: add missing destroy_workqueue in ab8500_charger_bind power: supply: ab8500: Remove flush_scheduled_work() call. power: supply: ab8500_fg: drop duplicated 'is' in comment power: supply: ab8500: Drop external charger leftovers power: supply: ab8500: Add MAINTAINERS entry dt-bindings: power: reset: qcom,pshold: convert to dtschema power: supply: Fix typo in power_supply_check_supplies power: reset: pwr-mlxbf: change rst_pwr_hid and low_pwr_hid from global to local variables power: reset: pwr-mlxbf: add missing include power: reset: at91-reset: add support for SAMA7G5 power: reset: at91-reset: add reset_controller_dev support power: reset: at91-reset: add at91_reset_data power: reset: at91-reset: document structures and enums dt-bindings: reset: add sama7g5 definitions dt-bindings: reset: atmel,at91sam9260-reset: add sama7g5 bindings dt-bindings: reset: convert Atmel/Microchip reset controller to YAML power: reset: pwr-mlxbf: add BlueField SoC power control driver power: supply: ab8500: Exit maintenance if too low voltage power: supply: ab8500: Respect charge_restart_voltage_uv ...
2022-08-12Merge tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull another VFIO update from Alex Williamson: - Rename vfio source file to more easily allow additional source files in the upcoming development cycles (Jason Gunthorpe) * tag 'vfio-v6.0-rc1pt2' of https://github.com/awilliam/linux-vfio: vfio: Move vfio.c to vfio_main.c
2022-08-12perf: riscv_pmu{,_sbi}: Miscallenous improvement & fixesPalmer Dabbelt
A series of mostly-independent fixes and cleanups for the RISC-V PMU drivers. Link: https://lore.kernel.org/lkml/CAAhSdy23vE8+HxU5Jxy2rBMjy3rBTrJt_4sriuROac_sEESSVw@mail.gmail.com/T/#m9de15aef1b65ae6155fa33ea1239578ef463c2a2 * palmer/riscv-pmu: RISC-V: Improve SBI definitions RISC-V: Move counter info definition to sbi header file RISC-V: Fix SBI PMU calls for RV32 RISC-V: Update user page mapping only once during start RISC-V: Fix counter restart during overflow for RV32
2022-08-12xen/pciback: Fix comment typoJason Wang
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220811120918.17961-1-wangborong@cdjrlc.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen/xenbus: fix return type in xenbus_file_read()Dan Carpenter
This code tries to store -EFAULT in an unsigned int. The xenbus_file_read() function returns type ssize_t so the negative value is returned as a positive value to the user. This change forces another change to the min() macro. Originally, the min() macro used "unsigned" type which checkpatch complains about. Also unsigned type would break if "len" were not capped at MAX_RW_COUNT. Use size_t for the min(). (No effect on runtime for the min_t() change). Fixes: 2fb3683e7b16 ("xen: Add xenbus device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen-blkfront: Apply 'feature_persistent' parameter when connectSeongJae Park
In some use cases[1], the backend is created while the frontend doesn't support the persistent grants feature, but later the frontend can be changed to support the feature and reconnect. In the past, 'blkback' enabled the persistent grants feature since it unconditionally checked if frontend supports the persistent grants feature for every connect ('connect_ring()') and decided whether it should use persistent grans or not. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has mistakenly changed the behavior. It made the frontend feature support check to not be repeated once it shown the 'feature_persistent' as 'false', or the frontend doesn't support persistent grants. Similar behavioral change has made on 'blkfront' by commit 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants"). This commit changes the behavior of the parameter to make effect for every connect, so that the previous behavior of 'blkfront' can be restored. [1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/ Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen-blkback: Apply 'feature_persistent' parameter when connectMaximilian Heyne
In some use cases[1], the backend is created while the frontend doesn't support the persistent grants feature, but later the frontend can be changed to support the feature and reconnect. In the past, 'blkback' enabled the persistent grants feature since it unconditionally checked if frontend supports the persistent grants feature for every connect ('connect_ring()') and decided whether it should use persistent grans or not. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has mistakenly changed the behavior. It made the frontend feature support check to not be repeated once it shown the 'feature_persistent' as 'false', or the frontend doesn't support persistent grants. This commit changes the behavior of the parameter to make effect for every connect, so that the previous workflow can work again as expected. [1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/ Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com> Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12xen-blkback: fix persistent grants negotiationSeongJae Park
Persistent grants feature can be used only when both backend and the frontend supports the feature. The feature was always supported by 'blkback', but commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has introduced a parameter for disabling it runtime. To avoid the parameter be updated while being used by 'blkback', the commit caches the parameter into 'vbd->feature_gnt_persistent' in 'xen_vbd_create()', and then check if the guest also supports the feature and finally updates the field in 'connect_ring()'. However, 'connect_ring()' could be called before 'xen_vbd_create()', so later execution of 'xen_vbd_create()' can wrongly overwrite 'true' to 'vbd->feature_gnt_persistent'. As a result, 'blkback' could try to use 'persistent grants' feature even if the guest doesn't support the feature. This commit fixes the issue by moving the parameter value caching to 'xen_blkif_alloc()', which allocates the 'blkif'. Because the struct embeds 'vbd' object, which will be used by 'connect_ring()' later, this should be called before 'connect_ring()' and therefore this should be the right and safe place to do the caching. Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-2-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-12x86/xen: Add support for HVMOP_set_evtchn_upcall_vectorJane Malalane
Implement support for the HVMOP_set_evtchn_upcall_vector hypercall in order to set the per-vCPU event channel vector callback on Linux and use it in preference of HVM_PARAM_CALLBACK_IRQ. If the per-VCPU vector setup is successful on BSP, use this method for the APs. If not, fallback to the global vector-type callback. Also register callback_irq at per-vCPU event channel setup to trick toolstack to think the domain is enlightened. Suggested-by: "Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by: Jane Malalane <jane.malalane@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220729070416.23306-1-jane.malalane@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-08-11Merge tag 'for-6.0/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - A few fixes for the DM verity and bufio changes in this merge window - A smatch warning fix for DM writecache locking in writecache_map * tag 'for-6.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: fix some cases where the code sleeps with spinlock held dm writecache: fix smatch warning about invalid return from writecache_map dm verity: fix verity_parse_opt_args parsing dm verity: fix DM_VERITY_OPTS_MAX value yet again dm bufio: simplify DM_BUFIO_CLIENT_NO_SLEEP locking
2022-08-11Merge tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Not much to squeeze into rc1, just two small fixes, one for core gem and one for shmem-helpers: gem: - Annotate WW context in error paths shmem-helper: - Add missing vunmap in error paths" * tag 'drm-next-2022-08-12-1' of git://anongit.freedesktop.org/drm/drm: drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error drm/shmem-helper: Add missing vunmap on error
2022-08-11RISC-V: Move counter info definition to sbi header fileAtish Patra
Counter info encoding format is defined by the SBI specificaiton. KVM implementation of SBI PMU extension will also leverage this definition. Move the definition to common sbi header file from the sbi pmu driver. Signed-off-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20220711174632.4186047-5-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fix SBI PMU calls for RV32Atish Patra
Some of the SBI PMU calls does not pass 64bit arguments correctly and not under RV32 compile time flags. Currently, this doesn't create any incorrect results as RV64 ignores any value in the additional register and qemu doesn't support raw events. Fix those SBI calls in order to set correct values for RV32. Fixes: e9991434596f ("RISC-V: Add perf platform driver based on SBI PMU extension") Signed-off-by: Atish Patra <atishp@rivosinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-4-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Update user page mapping only once during startAtish Patra
Currently, riscv_pmu_event_set_period updates the userpage mapping. However, the caller of riscv_pmu_event_set_period should update the userpage mapping because the counter can not be updated/started from set_period function in counter overflow path. Invoke the perf_event_update_userpage at the caller so that it doesn't get invoked twice during counter start path. Fixes: f5bfa23f576f ("RISC-V: Add a perf core library for pmu drivers") Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-3-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Fix counter restart during overflow for RV32Atish Patra
Pass the upper half of the initial value of the counter correctly for RV32. Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support") Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220711174632.4186047-2-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11RISC-V: Add Sstc extension supportPalmer Dabbelt
This series implements Sstc extension support which was ratified recently. Before the Sstc extension, an SBI call is necessary to generate timer interrupts as only M-mode have access to the timecompare registers. Thus, there is significant latency to generate timer interrupts at kernel. For virtualized enviornments, its even worse as the KVM handles the SBI call and uses a software timer to emulate the timecomapre register. Sstc extension solves both these problems by defining a stimecmp/vstimecmp at supervisor (host/guest) level. It allows kernel to program a timer and recieve interrupt without supervisor execution enviornment (M-mode/HS mode) intervention. * palmer/riscv-sstc: RISC-V: Prefer sstc extension if available RISC-V: Enable sstc extension parsing from DT RISC-V: Add SSTC extension CSR details
2022-08-11RISC-V: Prefer sstc extension if availableAtish Patra
RISC-V ISA has sstc extension which allows updating the next clock event via a CSR (stimecmp) instead of an SBI call. This should happen dynamically if sstc extension is available. Otherwise, it will fallback to SBI call to maintain backward compatibility. Reviewed-by: Anup Patel <anup@brainfault.org> Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20220722165047.519994-4-atishp@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-08-11i2c: move core from strlcpy to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no code used the return value. It has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: move drivers from strlcpy to strscpyWolfram Sang
Follow the advice of the below link and prefer 'strscpy'. Conversion is easy because no driver used the return value and has been done with a simple sed invocation. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: kempld: Support ACPI I2C device declarationChris Pringle
Adds an ACPI companion to the KEMPLD I2C driver so that it correctly detects any I2C devices nested under the KEMPLD's ACPI node (SBRG.CPLD). This allows I2C devices attached to the KEMPLD I2C adapter to be declared and instantiated via ACPI. Signed-off-by: Chris Pringle <chris.pringle@phabrix.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-11i2c: mediatek: add i2c compatible for MT8188Kewei Xu
Add i2c compatible for MT8188 and added mt_i2c_regs_v3[], since MT8188 i2c OFFSET_SLAVE_ADDR register changed from 0x04 to 0x94. Signed-off-by: Kewei Xu <kewei.xu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Qii Wang <qii.wang@mediatek.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-27 02:55:12 +0000