summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: move calling delay_autosuspend functionhayeswang
Move calling delay_autosuspend() in rtl8152_runtime_suspend(). Calling delay_autosuspend() as late as possible. The original flows are 1. check if the driver/device is busy now. 2. set wake events. 3. enter runtime suspend. If the wake event occurs between (1) and (2), the device may miss it. Besides, to avoid the runtime resume occurs after runtime suspend immediately, move the checking to the end of rtl8152_runtime_suspend(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16r8152: split rtl8152_resume functionhayeswang
Split rtl8152_resume() into rtl8152_runtime_resume() and rtl8152_system_resume(). Besides, replace GFP_KERNEL with GFP_NOIO for usb_submit_urb(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Refactor mlx4_en_free_tx_descTariq Toukan
Some code re-ordering, functionally equivalent. - The !tx_info->inl check is evaluated anyway in both flows (common case/end case). Run it first, this might finish the flows earlier. - dma_unmap calls are identical in both flows, get it out of the if block into the common area. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Replace TXBB_SIZE multiplications with shift operationsTariq Toukan
Define LOG_TXBB_SIZE, log of TXBB_SIZE, and use it with a shift operation instead of a multiplication with TXBB_SIZE. Operations are equivalent as TXBB_SIZE is a power of two. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Increase default TX ring sizeTariq Toukan
Increase the default TX ring size (from 512 to 1024) to match the RX ring size. This gives the XDP TX ring a better chance to keep up with the rate of its RX ring in case of a high load of XDP_TX actions. Tested: Ethtool counter rx_xdp_tx_full used to increase, after applying this patch it stopped. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Poll XDP TX completion queue in RX NAPITariq Toukan
Instead of having their own NAPIs, XDP TX completion queues get polled within the corresponding RX NAPI. This prevents any possible race on TX ring prod/cons indices, between the context that issues the transmits (RX NAPI) and the context that handles the completions (was previously done in a separate NAPI). This also improves performance, as it decreases the number of NAPIs running on a CPU, saving the overhead of syncing and switching between the contexts. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON. XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 12.0 Mpps | 13.8 Mpps | 15% | IPv6 | 12.0 Mpps | 13.8 Mpps | 15% | ------------------------------------- Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Improve XDP xmit functionTariq Toukan
Several performance improvements in XDP TX datapath, including: - Ring a single doorbell for XDP TX ring per NAPI budget, instead of doing it per a lower threshold (was 8). This includes removing the flow of immediate doorbell ringing in case of a full TX ring. - Compiler branch predictor hints. - Calculate values in compile time rather than in runtime. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON. XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 10.3 Mpps | 12.0 Mpps | 17% | IPv6 | 10.3 Mpps | 12.0 Mpps | 17% | ------------------------------------- Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Improve stack xmit functionTariq Toukan
Several small code and performance improvements in stack TX datapath, including: - Compiler branch predictor hints. - Minimize variables scope. - Move tx_info non-inline flow handling to a separate function. - Calculate data_offset in compile time rather than in runtime (for !lso_header_size branch). - Avoid trinary-operator ("?") when value can be preset in a matching branch. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Gain is too small to be measurable, no degradation sensed. Results are similar for IPv4 and IPv6. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Improve transmit CQ pollingTariq Toukan
Several small performance improvements in TX CQ polling, including: - Compiler branch predictor hints. - Minimize variables scope. - More proper check of cq type. - Use boolean instead of int for a binary indication. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Packet-rate tests for both regular stack and XDP use cases: No noticeable gain, no degradation. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Improve receive data-pathTariq Toukan
Several small performance improvements in RX datapath, including: - Compiler branch predictor hints. - Replace a multiplication with a shift operation. - Minimize variables scope. - Write-prefetch for packet header. - Avoid trinary-operator ("?") when value can be preset in a matching branch. - Save a branch by updating RX ring doorbell within mlx4_en_refill_rx_buffers(), which now returns void. Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Single queue no-RSS optimization ON (enable by ethtool -L <interface> rx 1). XDP_DROP packet rate: Same (28.1 Mpps), lower CPU utilization (from ~100% to ~92%). Drop packets in TC: ------------------------------------- | Before | After | Gain | IPv4 | 4.14 Mpps | 4.18 Mpps | 1% | ------------------------------------- XDP_TX packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 10.1 Mpps | 10.3 Mpps | 2% | IPv6 | 10.1 Mpps | 10.3 Mpps | 2% | ------------------------------------- Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Optimized single ring steeringSaeed Mahameed
Avoid touching RX QP RSS context when loading with only one RX ring, to allow optimized A0 RX steering. Enable by: - loading mlx4_core with module param: log_num_mgm_entry_size = -6. - then: ethtool -L <interface> rx 1 Performance tests: Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz XDP_DROP packet rate: ------------------------------------- | Before | After | Gain | IPv4 | 20.5 Mpps | 28.1 Mpps | 37% | IPv6 | 18.4 Mpps | 28.1 Mpps | 53% | ------------------------------------- Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net/mlx4_en: Remove unused argument in TX datapath functionTariq Toukan
Remove owner argument, as it is obsolete and unused. This also saves the overhead of calculating its value in data-path. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Cc: kernel-team@fb.com Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15atm: solos-pci: remove useless variable assignmentsGustavo A. R. Silva
Value assigned to variable _data32_ at lines 1254 and 1257 is overwritten at line 1260 before it can be used. This makes such variable assignments useless. Addresses-Coverity-ID: 1227049 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: add byte_enable for ocp_read_word functionhayeswang
Add byte_enable for ocp_read_word() to replace reading 4 bytes data with reading the desired 2 bytes data. This is used to avoid the issue which is described in commit b4d99def0938 ("r8152: remove sram_read"). The original method always reads 4 bytes data, and it may have problem when reading the PHY registers. The new method is supported since RTL8153B, but it doesn't influence the previous chips. The bits of the byte_enable for the previous chips are the reserved bits, and the hw would ignore them. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: support RTL8153Bhayeswang
This patch supports two new chips for RTL8153B. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15r8152: support new chip 8050hayeswang
The settings of the new chip are the same with RTL8152, except that its product ID is 0x8050. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Exit polling routine correctly during adapter resetThomas Falcon
This patch fixes a bug where, in the case of a device reset, the polling routine will never complete, causing napi_disable to sleep indefinitely when attempting to close the device. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Remove VNIC_CLOSING check from pending_scrqThomas Falcon
Fix a kernel panic resulting from data access of a NULL pointer during device close. The pending_scrq routine is meant to determine whether there is a valid sub-CRQ message awaiting processing. When the device is closing, however, there is a possibility that NULL messages can be processed because pending_scrq will always return 1 even if there no valid message in the queue. It's not clear what this closing state check was originally meant to accomplish, so just remove it. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Sanitize entire SCRQ buffer on resetThomas Falcon
Fixup a typo so that the entire SCRQ buffer is cleaned. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Ensure that TX queues are disabled in __ibmvnic_closeThomas Falcon
Use netif_tx_disable to guarantee that TX queues are disabled when __ibmvnic_close is called by the device reset routine. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ibmvnic: Activate disabled RX buffer pools on resetThomas Falcon
RX buffer pools are disabled while awaiting a device reset if firmware indicates that the resource is closed. This patch fixes a bug where pools were not being subsequently enabled after the device reset, causing the device to become inoperable. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15sunvnet: restrict advertized checksum offloads to just IPShannon Nelson
As much as we'd like to play well with others, we really aren't handling the checksums on non-IP protocol packets very well. This is easily seen when trying to do TCP over ipv6 - the checksums are garbage. Here we restrict the checksum feature flag to just IP traffic so that we aren't given work we can't yet do. Orabug: 26175391, 26259755 Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: s2io: remove useless variable in fill_rx_buffersGustavo A. R. Silva
Remove useless variable rxd_index and code related. Addresses-Coverity-ID: 1397691 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Prio and Tag macrosVivien Didelot
Prefix and document the remaining Global IP and IEEE Priority and Core Tag Type registers and give them a clear 16-bit register representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Stats macrosVivien Didelot
Prefix and document the Global Stats Operation and Counter registers and give them a clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Monitor Control macrosVivien Didelot
Prefix and document the Global Monitor Control Register macros (which became the Global Monitor & MGMT Control Register with 88E6390) and give a clear 16-bit registers representation. Use __bf_shf to get the shift value at compile time instead of adding new defined macros for it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Control macrosVivien Didelot
Prefix and document the Global Control and Control 2 registers macros and give a clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global VTU macrosVivien Didelot
Prefix and document the Global VTU registers macros and give a clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global ATU macrosVivien Didelot
Prefix and document the Global ATU Registers macros and give clear 16-bit registers representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Switch MAC macrosVivien Didelot
Prefix and document the Global Switch MAC Address Register macros and give clear 16-bit register representation. At the same time, move mv88e6xxx_g1_set_switch_mac in global1.c, where it belongs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15net: dsa: mv88e6xxx: prefix Global Status macrosVivien Didelot
Prefix and document the Global Status Register macros and give clear 16-bit register representation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15ptp: Add a ptp clock driver for Broadcom DTEArun Parameswaran
This patch adds a ptp clock driver for the Broadcom SoCs using the Digital timing Engine (DTE) nco. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ...
2017-06-15Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug on sparc where we may dereference freed stack memory" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: Work around deallocated stack frame reference gcc bug on sparc.
2017-06-15Merge tag 'acpi-4.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert an ACPICA commit from the 4.11 cycle that causes problems to happen on some systems and add a protection against possible kernel crashes due to table reference counter imbalance. Specifics: - Revert a 4.11 ACPICA change that made assumptions which are not satisfied on some systems and caused the enumeration of resources to fail on them (Rafael Wysocki). - Add a mechanism to prevent tables from being unmapped prematurely due to reference counter overflows (Lv Zheng)" * tag 'acpi-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-15Merge tag 'pm-4.12-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These revert a recent cpufreq schedutil governor change that turned out to be problematic and fix a few minor issues in cpufreq, cpuidle and the Exynos devfreq drivers. Specifics: - Revert a recent cpufreq schedutil governor change that caused some systems to behave undesirably (Rafael Wysocki). - Fix a cpufreq conservative governor issue introduced during the 3.10 cycle that prevents it from working as expected in some situations (Tomasz Wilczyński). - Fix an error code path in the generic cpuidle driver for DT-based systems (Christophe Jaillet). - Fix three minor issues in devfreq drivers for Exynos (Arvind Yadav, Krzysztof Kozlowski)" * tag 'pm-4.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: dt: Add missing 'of_node_put()' cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
2017-06-15Merge branch 'for-4.12/driver-matching-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fix from Jiri Kosina: - ifdef-based bandaid for a long-standing issue with HID driver matching, avoiding regressions in cases where specific driver is not enabled in kernel .config, from Jiri Kosina * 'for-4.12/driver-matching-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: let generic driver yield control iff specific driver has been enabled
2017-06-15Merge tag 'media/v4.12-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - some build dependency issues at CEC core with randconfigs - fix an off by one error at vb2 - a race fix at cec core - driver fixes at tc358743, sir_ir and rainshadow-cec * tag 'media/v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED [media] cec: race fix: don't return -ENONET in cec_receive() [media] sir_ir: infinite loop in interrupt handler [media] cec-notifier.h: handle unreachable CONFIG_CEC_CORE [media] cec: improve MEDIA_CEC_RC dependencies [media] vb2: Fix an off by one error in 'vb2_plane_vaddr' [media] rainshadow-cec: Fix missing spin_lock_init() [media] tc358743: fix register i2c_rd/wr function fix
2017-06-14i40e: Fix a sleep-in-atomic bugJia-Ju Bai
The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge branch 'acpica-fixes'Rafael J. Wysocki
* acpica-fixes: ACPICA: Tables: Mechanism to handle late stage acpi_get_table() imbalance Revert "ACPICA: Disassembler: Enhance resource descriptor detection"
2017-06-15Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" * pm-cpuidle: cpuidle: dt: Add missing 'of_node_put()' * pm-devfreq: PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
2017-06-14liquidio: fix VF driver off-by-one bug when setting ethtool -C ethX rx-framesWeilin Chang
Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14net/mlxfw: fix a NULL dereferenceDan Carpenter
If we hit this error path we end up returning ERR_PTR(0) which is NULL. The caller is not expecting that so it results in a NULL dereference. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-06-14 Here's another batch of Bluetooth patches for the 4.13 kernel: - Fix for Broadcom controllers not supporting Event Mask Page 2 - New QCA ROME USB ID for btusb - Fix for Security Manager Protocol to use constant-time memcmp - Improved support for TI WiLink chips Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14qed: Fix an off by one bugDan Carpenter
The p_l2_info->pp_qid_usage[] array has "p_l2_info->queues" elements so the > here should be a >= or we write beyond the end of the array. Fixes: bbe3f233ec5e ("qed: Assign a unique per-queue index to queue-cid") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14mlxsw: spectrum: Add support for access cable info via ethtoolArkadi Sharshevsky
Add support for access cable info via ethtool. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-14mlxsw: reg: Add MCIA register for cable info accessArkadi Sharshevsky
The MCIA register is used to access the SFP+ and QSFP connector's EPROM. It will be used to query the cable info. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-26 07:14:06 +0000