| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds s390dbf logging to the function that executes the
PQAP(AQIC) instruction on behalf of the guest to which the queue for which
interrupts are being enabled or disabled is attached.
Currently, the vfio_ap_irq_enable function sets status response code 06
(notification indicator byte address (nib) invalid) in the status word
when the vfio_pin_pages function - called to pin the page containing the
nib - returns an error or a different number of pages pinned than
requested.
Setting the response code returned to userspace without also logging a
message in the kernel makes it impossible to determine whether the response
was due to an error detected by the vfio_ap device driver or because the
response code was returned by the firmware in response to the PQAP(AQIC)
instruction.
In addition to logging a warning for the situation above, this patch adds
the following:
* A function to validate the nib address invoked prior to calling the
vfio_pin_pages function. This allows for logging a message informing
the reader of the reason the page containing the nib can not be pinned
if the nib address is not valid. Response code 06 (invalid nib address)
will be set in the status word returned to the guest from the
instruction.
* Checks the return value from the kvm_s390_gisc_register and logs a
message informing the reader of the failure. Status response code 08
(invalid gisa) will be set in the status word returned to the guest from
the PQAP(AQIC) instruction.
* Checks the status response code returned from execution of the PQAP(AQIC)
instruction and if it indicates an error, logs a message informing the
reader.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
This patch adds s390dbf logging to the function that handles interception
of the PQAP(AQIC) instruction. Several items of data are validated before
ultimately calling the functions that execute the PQAP(AQIC) instruction on
behalf of the guest to which the queue for which interrupts are being
enabled or disabled is attached.
Currently, the handle_pqap function sets status response code 01 (queue not
available) in the status word that is normally returned from the
PQAP(AQIC) instruction under the following conditions:
* Set when the function pointer to the handler is not set in the
kvm_s390_crypto object (i.e., the PQAP hook is not registered).
* Set when the KVM pointer is not set in the ap_matrix_mdev object
(i.e., the matrix mdev is not passed through to a guest).
* Set when the queue for which interrupts are being enabled or
disabled is either not bound to the vfio_ap device driver or not assigned
to the matrix mdev.
Setting the response code returned to userspace without also logging a
message in the kernel makes it impossible to determine whether the response
was due to an error detected by the vfio_ap device driver or because the
response code was returned by the firmware in response to the PQAP(AQIC)
instruction, so this patch logs a message to the s390dbf log for the
vfio_ap device driver for each of the situations described above.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Sets up an s390dbf debug log for the vfio_ap device driver for logging
events occurring during the lifetime of the driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
"Remove a bogus warning introduced by the recent PCI MSI irq affinity
overhaul"
* tag 'irq_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Remove bogus warning in pci_irq_get_affinity()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Fix altera and xgene EDAC drivers to propagate the correct error code
from platform_get_irq() so that deferred probing still works"
* tag 'edac_urgent_for_v5.17_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/xgene: Fix deferred probing
EDAC/altera: Fix deferred probing
|
|
Pull rdma fixes from Jason Gunthorpe:
"Some medium sized bugs in the various drivers. A couple are more
recent regressions:
- Fix two panics in hfi1 and two allocation problems
- Send the IGMP to the correct address in cma
- Squash a syzkaller bug related to races reading the multicast list
- Memory leak in siw and cm
- Fix a corner case spec compliance for HFI/QIB
- Correct the implementation of fences in siw
- Error unwind bug in mlx4"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx4: Don't continue event handler after memory allocation failure
RDMA/siw: Fix broken RDMA Read Fence/Resume logic.
IB/rdmavt: Validate remote_addr during loopback atomic tests
IB/cm: Release previously acquired reference counter in the cm_id_priv
RDMA/siw: Fix refcounting leak in siw_create_qp()
RDMA/ucma: Protect mc during concurrent multicast leaves
RDMA/cma: Use correct address when leaving multicast group
IB/hfi1: Fix tstats alloc and dealloc
IB/hfi1: Fix AIP early init panic
IB/hfi1: Fix alloc failure with larger txqueuelen
IB/hfi1: Fix panic with larger ipoib send_queue_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven fixes, six of which are fairly obvious driver fixes.
The one core change to the device budget depth is to try to ensure
that if the default depth is large (which can produce quite a sizeable
bitmap allocation per device), we give back the memory we don't need
if there's a queue size reduction in slave_configure (which happens to
a lot of devices)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Fix setting of hisi_sas_slot.is_internal
scsi: pm8001: Fix use-after-free for aborted SSP/STP sas_task
scsi: pm8001: Fix use-after-free for aborted TMF sas_task
scsi: pm8001: Fix warning for undescribed param in process_one_iomb()
scsi: core: Reallocate device's budget map on queue depth change
scsi: bnx2fc: Make bnx2fc_recv_frame() mp safe
scsi: pm80xx: Fix double completion for SATA devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Restructure j721e_pcie_probe() so we don't dereference a NULL pointer
(Bjorn Helgaas)
- Add a kirin_pcie_data struct to identify different Kirin variants to
fix probe failure for controllers with an internal PHY (Bjorn
Helgaas)
* tag 'pci-v5.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: kirin: Add dev struct for of_device_get_match_data()
PCI: j721e: Initialize pcie->cdns_pcie before using it
|
|
Bean reported that a622435fbe1a ("PCI: kirin: Prefer
of_device_get_match_data()") broke kirin_pcie_probe() because it assumed
match data of 0 was a failure when in fact, it meant the match data was
"(void *)PCIE_KIRIN_INTERNAL_PHY".
Therefore, probing of "hisilicon,kirin960-pcie" devices failed with -EINVAL
and an "OF data missing" message.
Add a struct kirin_pcie_data to encode the PHY type. Then the result of
of_device_get_match_data() should always be a non-NULL pointer to a struct
kirin_pcie_data that contains the PHY type.
Fixes: a622435fbe1a ("PCI: kirin: Prefer of_device_get_match_data()")
Link: https://lore.kernel.org/r/20220202162659.GA12603@bhelgaas
Link: https://lore.kernel.org/r/20220201215941.1203155-1-huobean@gmail.com
Reported-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- fix use-after-free in rdma and tcp controller reset (Sagi Grimberg)
- fix the state check in nvmf_ctlr_matches_baseopts (Uday Shankar)
- MD nowait null pointer fix (Song)
- blk-integrity seed advance fix (Martin)
- Fix a dio regression in this merge window (Ilya)
* tag 'block-5.17-2022-02-04' of git://git.kernel.dk/linux-block:
block: bio-integrity: Advance seed correctly for larger interval sizes
nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()
md: fix NULL pointer deref with nowait but no mddev->queue
block: fix DIO handling regressions in blkdev_read_iter()
nvme-rdma: fix possible use-after-free in transport error_recovery work
nvme-tcp: fix possible use-after-free in transport error_recovery work
nvme: fix a possible use-after-free in controller reset during load
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
- Sergey volunteered to be a reviewer for the Renesas R-Car SATA driver
and PATA drivers. Update the MAINTAINERS file accordingly.
- Regression fix: add a horkage flag to prevent accessing the log
directory log page with SATADOM-ML 3ME SATA devices as they react
badly to reading that log page (from Anton).
* tag 'ata-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: Introduce ATA_HORKAGE_NO_LOG_DIR horkage
MAINTAINERS: add myself as Renesas R-Car SATA driver reviewer
MAINTAINERS: add myself as PATA drivers reviewer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Warning fixes and a fix for a potential use-after-free in IOMMU core
code
- Another potential memory leak fix for the Intel VT-d driver
- Fix for an IO polling loop timeout issue in the AMD IOMMU driver
* tag 'iommu-fixes-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()
iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()
iommu: Fix some W=1 warnings
iommu: Fix potential use-after-free during probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
"For this week, we have:
- A fix to make more frequent use of hwgenerator randomness, from
Dominik.
- More cleanups to the boot initialization sequence, from Dominik.
- A fix for an old shortcoming with the ZAP ioctl, from me.
- A workaround for a still unfixed Clang CFI/FullLTO compiler bug,
from me. On one hand, it's a bummer to commit workarounds for
experimental compiler features that have bugs. But on the other, I
think this actually improves the code somewhat, independent of the
bug. So a win-win"
* tag 'random-5.17-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: only call crng_finalize_init() for primary_crng
random: access primary_pool directly rather than through pointer
random: wake up /dev/random writers after zap
random: continually use hwgenerator randomness
lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix compilation in the case when ACPI is selected and CRC32, depended
on by ACPI after recent changes, is not (Randy Dunlap)"
* tag 'acpi-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: require CRC32 to build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes.
The major changes are ASoC core fixes, addressing the DPCM locking
issue after the recent code changes and the potentially invalid
register accesses via control API. Also, HD-audio got a core fix for
Oops at dynamic unbinding.
The rest are device-specific small fixes, including the usual stuff
like HD-audio and USB-audio quirks"
* tag 'sound-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits)
ALSA: hda: Skip codec shutdown in case the codec is not registered
ALSA: usb-audio: Correct quirk for VF0770
ALSA: Replace acpi_bus_get_device()
Input: wm97xx: Simplify resource management
ALSA: hda/realtek: Add quirk for ASUS GU603
ALSA: hda/realtek: Fix silent output on Gigabyte X570 Aorus Xtreme after reboot from Windows
ALSA: hda/realtek: Fix silent output on Gigabyte X570S Aorus Master (newer chipset)
ALSA: hda/realtek: Add missing fixup-model entry for Gigabyte X570 ALC1220 quirks
ALSA: hda: realtek: Fix race at concurrent COEF updates
ASoC: ops: Check for negative values before reading them
ASoC: rt5682: Fix deadlock on resume
ASoC: hdmi-codec: Fix OOB memory accesses
ASoC: soc-pcm: Move debugfs removal out of spinlock
ASoC: soc-pcm: Fix DPCM lockdep warning due to nested stream locks
ASoC: fsl: Add missing error handling in pcm030_fabric_probe
ALSA: hda: Fix signedness of sscanf() arguments
ALSA: usb-audio: initialize variables that could ignore errors
ALSA: hda: Fix UAF of leds class devs at unbinding
ASoC: qdsp6: q6apm-dai: only stop graphs that are started
ASoC: codecs: wcd938x: fix return value of mixer put function
...
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for the week. Daniel has agreed to bring back the fbcon
hw acceleration under a CONFIG option for the non-drm fbdev users, we
don't advise turning this on unless you are in the niche that is old
fbdev drivers, Since it's essentially a revert and shouldn't be high
impact seemed like a good time to do it now.
Otherwise, i915 and amdgpu fixes are most of it, along with some minor
fixes elsewhere.
fbdev:
- readd fbcon acceleration
i915:
- fix DP monitor via type-c dock
- fix for engine busyness and read timeout with GuC
- use ALLOW_FAIL for error capture buffer allocs
- don't use interruptible lock on error paths
- smatch fix to reject zero sized overlays.
amdgpu:
- mGPU fan boost fix for beige goby
- S0ix fixes
- Cyan skillfish hang fix
- DCN fixes for DCN 3.1
- DCN fixes for DCN 3.01
- Apple retina panel fix
- ttm logic inversion fix
dma-buf:
- heaps: fix potential spectre v1 gadget
kmb:
- fix potential oob access
mxsfb:
- fix NULL ptr deref
nouveau:
- fix potential oob access during BIOS decode"
* tag 'drm-fixes-2022-02-04' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm: mxsfb: Fix NULL pointer dereference
drm/amdgpu: fix logic inversion in check
drm/amd: avoid suspend on dGPUs w/ s2idle support when runtime PM enabled
drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina panels
drm/amd/display: revert "Reset fifo after enable otg"
drm/amd/display: watermark latencies is not enough on DCN31
drm/amd/display: Update watermark values for DCN301
drm/amdgpu: fix a potential GPU hang on cyan skillfish
drm/amd: Only run s3 or s0ix if system is configured properly
drm/amd: add support to check whether the system is set to s3
fbcon: Add option to enable legacy hardware acceleration
Revert "fbcon: Disable accelerated scrolling"
Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from TODO list)"
drm/i915/pmu: Fix KMD and GuC race on accessing busyness
dma-buf: heaps: Fix potential spectre v1 gadget
drm/amd: Warn users about potential s0ix problems
drm/amd/pm: correct the MGpuFanBoost support for Beige Goby
drm/nouveau: fix off by one in BIOS boundary checking
drm/i915/adlp: Fix TypeC PHY-ready status readout
drm/i915/pmu: Use PM timestamp instead of RING TIMESTAMP for reference
...
|
|
crng_finalize_init() returns instantly if it is called for another pool
than primary_crng. The test whether crng_finalize_init() is still required
can be moved to the relevant caller in crng_reseed(), and
crng_need_final_init can be reset to false if crng_finalize_init() is
called with workqueues ready. Then, no previous callsite will call
crng_finalize_init() unless it is needed, and we can get rid of the
superfluous function parameter.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Both crng_initialize_primary() and crng_init_try_arch_early() are
only called for the primary_pool. Accessing it directly instead of
through a function parameter simplifies the code.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
When account() is called, and the amount of entropy dips below
random_write_wakeup_bits, we wake up the random writers, so that they
can write some more in. However, the RNDZAPENTCNT/RNDCLEARPOOL ioctl
sets the entropy count to zero -- a potential reduction just like
account() -- but does not unblock writers. This commit adds the missing
logic to that ioctl to unblock waiting writers.
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The rngd kernel thread may sleep indefinitely if the entropy count is
kept above random_write_wakeup_bits by other entropy sources. To make
best use of multiple sources of randomness, mix entropy from hardware
RNGs into the pool at least once within CRNG_RESEED_INTERVAL.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The polling loop for the register change in iommu_ga_log_enable() needs
to have a udelay() in it. Otherwise the CPU might be faster than the
IOMMU hardware and wrongly trigger the WARN_ON() further down the code
stream. Use a 10us for udelay(), has there is some hardware where
activation of the GA log can take more than a 100ms.
A future optimization should move the activation check of the GA log
to the point where it gets used for the first time. But that is a
bigger change and not suitable for a fix.
Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org
|
|
The recent overhaul of pci_irq_get_affinity() introduced a regression when
pci_irq_get_affinity() is called for an MSI-X interrupt which was not
allocated with affinity descriptor information.
The original code just returned a NULL pointer in that case, but the rework
added a WARN_ON() under the assumption that the corresponding WARN_ON() in
the MSI case can be applied to MSI-X as well.
In fact the MSI warning in the original code does not make sense either
because it's legitimate to invoke pci_irq_get_affinity() for a MSI
interrupt which was not allocated with affinity descriptor information.
Remove it and just return NULL as the original code did.
Fixes: f48235900182 ("PCI/MSI: Simplify pci_irq_get_affinity()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ee4n38sm.ffs@tglx
|
|
06f6c4c6c3e8 ("ata: libata: add missing ata_identify_page_supported() calls")
introduced additional calls to ata_identify_page_supported(), thus also
adding indirectly accesses to the device log directory log page through
ata_log_supported(). Reading this log page causes SATADOM-ML 3ME devices
to lock up.
Introduce the horkage flag ATA_HORKAGE_NO_LOG_DIR to prevent accesses to
the log directory in ata_log_supported() and add a blacklist entry
with this flag for "SATADOM-ML 3ME" devices.
Fixes: 636f6e2af4fb ("libata: add horkage for missing Identify Device log")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Fix GitLab issue #4698: DP monitor through Type-C dock(Dell DA310) doesn't work.
Fixes for inconsistent engine busyness value and read timeout with GuC.
Fix to use ALLOW_FAIL for error capture buffer allocation. Don't use
interruptible lock on error path. Smatch fix to reject zero sized overlays.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YfuiG8SKMKP5V/Dm@jlahtine-mobl.ger.corp.intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* dma-buf/heaps: Fix potential spectre v1 gadget
* drm/kmb: Fix potential out-of-bounds access
* drm/mxsfb: Fix NULL-pointer dereference
* drm/nouveau: Fix potential out-of-bounds access in BIOS decoding
* fbdev: Re-add support for fbcon hardware acceleration
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yfu8mTZQUNt1RwZd@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
|
|
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.17
- fix a use-after-free in rdm and tcp controller reset (Sagi Grimberg)
- fix the state check in nvmf_ctlr_matches_baseopts (Uday Shankar)"
* tag 'nvme-5.17-2022-02-03' of git://git.infradead.org/nvme:
nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()
nvme-rdma: fix possible use-after-free in transport error_recovery work
nvme-tcp: fix possible use-after-free in transport error_recovery work
nvme: fix a possible use-after-free in controller reset during load
|
|
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mxsfb should not ever dereference the NULL pointer which
drm_atomic_get_new_bridge_state is allowed to return.
Assume a fixed format instead.
Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202081755.145716-3-alexander.stein@ew.tq-group.com
|
|
Controller deletion/reset, immediately followed by or concurrent with
a reconnect, is hard failing the connect attempt resulting in a
complete loss of connectivity to the controller.
In the connect request, fabrics looks for an existing controller with
the same address components and aborts the connect if a controller
already exists and the duplicate connect option isn't set. The match
routine filters out controllers that are dead or dying, so they don't
interfere with the new connect request.
When NVME_CTRL_DELETING_NOIO was added, it missed updating the state
filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this
new state, it's seen as a live controller and fails the connect request.
Correct by adding the DELETING_NIO state to the match checks.
Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We probably never trigger this, but the logic inside the check is
inverted.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dGPUs connected to Intel systems configured for suspend to idle
will not have the power rails cut at suspend and resetting the GPU
may lead to problematic behaviors.
Fixes: e25443d2765f4 ("drm/amdgpu: add a dev_pm_ops prepare callback (v2)")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1879
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
panels
The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is
contradictory to the highest rate supported reported by
EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit
'4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results
in no display modes being found and a dark panel.
For now, simply force the maximum supported link rate for the eDP attached
2018 15" Apple Retina panels.
Additionally, we must also check the firmware revision since the device ID
reported by the DPCD is identical to that of the more capable 16,1,
incorrectly quirking it. We also use said firmware check to quirk the
refreshed 15,1 models with Vega graphics as they use a slightly newer
firmware version.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
This change causes regression, that prevents some systems
from lighting up internal displays.
[How]
Revert this patch until a new solution is ready.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
The original latencies were causing underflow in some modes.
Resolution: 2880x1620@60p when HDR enable
[How]
1. Replace with the up-to-date watermark values based on new measurments
2. Correct the ddr_wm_table name to DDR5 on DCN31
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
There is underflow / visual corruption DCN301, for high
bandwidth MST DSC configurations such as 2x1440p144 or 2x4k60.
[How]
Use up-to-date watermark values for DCN301.
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We observed a GPU hang when querying GMC CG state(i.e.,
cat amdgpu_pm_info) on cyan skillfish. Acctually, cyan
skillfish doesn't support any CG features.
Just prevent it from accessing GMC CG registers.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This will cause misconfigured systems to not run the GPU suspend
routines.
* In APUs that are properly configured system will go into s2idle.
* In APUs that are intended to be S3 but user selects
s2idle the GPU will stay fully powered for the suspend.
* In APUs that are intended to be s2idle and system misconfigured
the GPU will stay fully powered for the suspend.
* In systems that are intended to be s2idle, but AMD dGPU is also
present, the dGPU will go through S3
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This will be used to help make decisions on what to do in
misconfigured systems.
v2: squash in semicolon fix from Stephen Rothwell
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Leon reported NULL pointer deref with nowait support:
[ 15.123761] device-mapper: raid: Loading target version 1.15.1
[ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1
[ 15.124192] device-mapper: raid: Choosing default region size of 4MiB
[ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060
[ 15.129530] #PF: supervisor write access in kernel mode
[ 15.129533] #PF: error_code(0x0002) - not-present page
[ 15.129535] PGD 0 P4D 0
[ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e
[ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021
[ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20
[ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \
00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \
31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00
[ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202
[ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000
[ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d
[ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000
[ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070
[ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001
[ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000
[ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0
[ 15.129580] Call Trace:
[ 15.129582] <TASK>
[ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531]
[ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63]
[ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e]
[ 15.129663] __x64_sys_ioctl+0x8e/0xd0
[ 15.129667] do_syscall_64+0x5c/0x90
[ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50
[ 15.129675] ? do_syscall_64+0x69/0x90
[ 15.129677] ? do_syscall_64+0x69/0x90
[ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50
[ 15.129682] ? do_syscall_64+0x69/0x90
[ 15.129684] ? do_syscall_64+0x69/0x90
[ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 15.129689] RIP: 0033:0x7fa96ecd559b
[ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \
c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \
ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48
[ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
[ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b
[ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003
[ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27
[ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610
[ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530
[ 15.129709] </TASK>
This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT
Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check.
Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT")
Reported-by: Leon Möller <jkhsjdhjs@totally.rip>
Tested-by: Leon Möller <jkhsjdhjs@totally.rip>
Cc: Vishal Verma <vverma@digitalocean.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Most interesting and urgent is the Intel stuff affecting Chromebooks
and laptops.
- Fix up group name building on the Intel Thunderbay
- Fix interrupt problems on the Intel Cherryview
- Fix some pin data on the Sunxi H616
- Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the
merge window
- Fix an unexpected interrupt problem on the Intel Sunrisepoint
- Fix a glitch when updating IRQ flags on all Intel pin controllers
- Revert a Zynqmp patch to unify the pin naming, let's find some
better solution
- Fix some error paths in the Broadcom BCM2835 driver
- Fix a Kconfig problem pertaining to the BCM63XX drivers
- Fix the regmap support in the Microchip SGPIO driver"
* tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: microchip-sgpio: Fix support for regmap
pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP
pinctrl: bcm2835: Fix a few error paths
pinctrl: zynqmp: Revert "Unify pin naming"
pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
pinctrl: intel: fix unexpected interrupt
pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile
pinctrl: sunxi: Fix H616 I2S3 pin data
pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping
pinctrl: thunderbay: rework loops looking for groups names
pinctrl: thunderbay: comment process of building functions a bit
|
|
Do not try to use any SKB fields after the packet has been passed up in the
receive stack.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-02-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
Sorry about the long series, but I had to move the top two patches from
net-next to net to help avoiding a build break when kspp branch is merged
into linus-next on next merge window.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to
enable bitblt and fillrect hardware acceleration in the framebuffer
console. If disabled, such acceleration will not be used, even if it is
supported by the graphics hardware driver.
If you plan to use DRM as your main graphics output system, you should
disable this option since it will prevent compiling in code which isn't
used later on when DRM takes over.
For all other configurations, e.g. if none of your graphic cards support
DRM (yet), DRM isn't available for your architecture, or you can't be
sure that the graphic card in the target system will support DRM, you
most likely want to enable this option.
In the non-accelerated case (e.g. when DRM is used), the inlined
fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the
compiler is able to optimize much unneccesary code away.
In this v3 patch version I additionally changed the GETVYRES() and GETVXRES()
macros to take a pointer to the fbcon_display struct. This fixes the build when
console rotation is enabled and helps the compiler again to optimize out code.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de
|
|
This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151.
Revert the first (of 2) commits which disabled scrolling acceleration in
fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards
because of the performance penalty by doing screen scrolling by software
instead of using the existing graphic card 2D hardware acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a85).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de
|
|
TODO list)"
This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578.
Revert the second (of 2) commits which disabled scrolling acceleration
in fbcon/fbdev. It introduced a regression for fbdev-supported graphic
cards because of the performance penalty by doing screen scrolling by
software instead of using the existing graphic card 2D hardware
acceleration.
Console scrolling acceleration was disabled by dropping code which
checked at runtime the driver hardware capabilities for the
BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it
enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move
screen contents. After dropping those checks scrollmode was hard-wired
to SCROLL_REDRAW instead, which forces all graphic cards to redraw every
character at the new screen position when scrolling.
This change effectively disabled all hardware-based scrolling acceleration for
ALL drivers, because now all kind of 2D hardware acceleration (bitblt,
fillrect) in the drivers isn't used any longer.
The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm
and gma500) used hardware acceleration in the past and thus code for checking
and using scrolling acceleration is obsolete.
This statement is NOT TRUE, because beside the DRM drivers there are around 35
other fbdev drivers which depend on fbdev/fbcon and still provide hardware
acceleration for fbdev/fbcon.
The original commit message also states that syzbot found lots of bugs in fbcon
and thus it's "often the solution to just delete code and remove features".
This is true, and the bugs - which actually affected all users of fbcon,
including DRM - were fixed, or code was dropped like e.g. the support for
software scrollback in vgacon (commit 973c096f6a85).
So to further analyze which bugs were found by syzbot, I've looked through all
patches in drivers/video which were tagged with syzbot or syzkaller back to
year 2005. The vast majority fixed the reported issues on a higher level, e.g.
when screen is to be resized, or when font size is to be changed. The few ones
which touched driver code fixed a real driver bug, e.g. by adding a check.
But NONE of those patches touched code of either the SCROLL_MOVE or the
SCROLL_REDRAW case.
That means, there was no real reason why SCROLL_MOVE had to be ripped-out and
just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far
was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it
could go away. That argument completely missed the fact that SCROLL_MOVE is
still heavily used by fbdev (non-DRM) drivers.
Some people mention that using memcpy() instead of the hardware acceleration is
pretty much the same speed. But that's not true, at least not for older graphic
cards and machines where we see speed decreases by factor 10 and more and thus
this change leads to console responsiveness way worse than before.
That's why the original commit is to be reverted. By reverting we
reintroduce hardware-based scrolling acceleration and fix the
performance regression for fbdev drivers.
There isn't any impact on DRM when reverting those patches.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-2-deller@gmx.de
|
|
While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
While nvme_tcp_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state.
Tested-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl
readiness for AER submission. This may lead to a use-after-free
condition that was observed with nvme-tcp.
The race condition may happen in the following scenario:
1. driver executes its reset_ctrl_work
2. -> nvme_stop_ctrl - flushes ctrl async_event_work
3. ctrl sends AEN which is received by the host, which in turn
schedules AEN handling
4. teardown admin queue (which releases the queue socket)
5. AEN processed, submits another AER, calling the driver to submit
6. driver attempts to send the cmd
==> use-after-free
In order to fix that, add ctrl state check to validate the ctrl
is actually able to accept the AER submission.
This addresses the above race in controller resets because the driver
during teardown should:
1. change ctrl state to RESETTING
2. flush async_event_work (as well as other async work elements)
So after 1,2, any other AER command will find the
ctrl state to be RESETTING and bail out without submitting the AER.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
