summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-01-09phy state machine: failsafe leave invalid RUNNING stateZefir Kurtisi
While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix dumping of nft_quota entries, from Pablo Neira Ayuso. 2) Fix out of bounds access in nf_tables discovered by KASAN, from Florian Westphal. 3) Fix IRQ enabling in dp83867 driver, from Grygorii Strashko. 4) Fix unicast filtering in be2net driver, from Ivan Vecera. 5) tg3_get_stats64() can race with driver close and ethtool reconfigurations, fix from Michael Chan. 6) Fix error handling when pass limit is reached in bpf code gen on x86. From Daniel Borkmann. 7) Don't clobber switch ops and use proper MDIO nested reads and writes in bcm_sf2 driver, from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) net: dsa: bcm_sf2: Utilize nested MDIO read/write net: dsa: bcm_sf2: Do not clobber b53_switch_ops net: stmmac: fix maxmtu assignment to be within valid range bpf: change back to orig prog on too many passes tg3: Fix race condition in tg3_get_stats64(). be2net: fix unicast list filling be2net: fix accesses to unicast list netlabel: add CALIPSO to the list of built-in protocols vti6: fix device register to report IFLA_INFO_KIND net: phy: dp83867: fix irq generation amd-xgbe: Fix IRQ processing when running in single IRQ mode sh_eth: R8A7740 supports packet shecksumming sh_eth: fix EESIPR values for SH77{34|63} r8169: fix the typo in the comment nl80211: fix sched scan netlink socket owner destruction bridge: netfilter: Fix dropping packets that moving through bridge interface netfilter: ipt_CLUSTERIP: check duplicate config when initializing netfilter: nft_payload: mangle ckecksum if NFT_PAYLOAD_L4CSUM_PSEUDOHDR is set netfilter: nf_tables: fix oob access netfilter: nft_queue: use raw_smp_processor_id() ...
2017-01-08net: dsa: bcm_sf2: Utilize nested MDIO read/writeFlorian Fainelli
We are implementing a MDIO bus which is behind another one, so use the nested version of the accessors to get lockdep annotations correct. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: dsa: bcm_sf2: Do not clobber b53_switch_opsFlorian Fainelli
We make the bcm_sf2 driver override ds->ops which points to b53_switch_ops since b53_switch_alloc() did the assignent. This is all well and good until a second b53 switch comes in, and ends up using the bcm_sf2 operations. Make a proper local copy, substitute the ds->ops pointer and then override the operations. Fixes: f458995b9ad8 ("net: dsa: bcm_sf2: Utilize core B53 driver when possible") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: stmmac: fix maxmtu assignment to be within valid rangeKweh, Hock Leong
There is no checking valid value of maxmtu when getting it from device tree. This resolution added the checking condition to ensure the assignment is made within a valid range. Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08Merge tag 'usb-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an artifact of the holiday break I think. Lots of gadget and the usual XHCI fixups for reported issues (one day that driver will calm down...) Also included are a bunch of usb-serial driver fixes, and for good measure, a number of much-reported MUSB driver issues have finally been resolved. All of these have been in linux-next with no reported issues" * tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits) USB: fix problems with duplicate endpoint addresses usb: ohci-at91: use descriptor-based gpio APIs correctly usb: storage: unusual_uas: Add JMicron JMS56x to unusual device usb: hub: Move hub_port_disable() to fix warning if PM is disabled usb: musb: blackfin: add bfin_fifo_offset in bfin_ops usb: musb: fix compilation warning on unused function usb: musb: Fix trying to free already-free IRQ 4 usb: musb: dsps: implement clear_ep_rxintr() callback usb: musb: core: add clear_ep_rxintr() to musb_platform_ops USB: serial: ti_usb_3410_5052: fix NULL-deref at open USB: serial: spcp8x5: fix NULL-deref at open USB: serial: quatech2: fix sleep-while-atomic in close USB: serial: pl2303: fix NULL-deref at open USB: serial: oti6858: fix NULL-deref at open USB: serial: omninet: fix NULL-derefs at open and disconnect USB: serial: mos7840: fix misleading interrupt-URB comment USB: serial: mos7840: remove unused write URB USB: serial: mos7840: fix NULL-deref at open USB: serial: mos7720: remove obsolete port initialisation USB: serial: mos7720: fix parallel probe ...
2017-01-08Merge tag 'char-misc-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.10-rc3. Two MEI driver fixes, and three NVMEM patches for reported issues, and a new Hyper-V driver MAINTAINER update. Nothing major at all, all have been in linux-next with no reported issues" * tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: hyper-v: Add myself as additional MAINTAINER nvmem: fix nvmem_cell_read() return type doc nvmem: imx-ocotp: Fix wrong register size nvmem: qfprom: Allow single byte accesses for read/write mei: move write cb to completion on credentials failures mei: bus: fix mei_cldev_enable KDoc
2017-01-08Merge tag 'staging-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are some staging and IIO driver fixes for 4.10-rc3. Most of these are minor IIO fixes of reported issues, along with one network driver fix to resolve an issue. And a MAINTAINERS update with a new mailing list. All of these, except the MAINTAINERS file update, have been in linux-next with no reported issues (the MAINTAINERS patch happened on Friday...)" * tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: MAINTAINERS: add greybus subsystem mailing list staging: octeon: Call SET_NETDEV_DEV() iio: accel: st_accel: fix LIS3LV02 reading and scaling iio: common: st_sensors: fix channel data parsing iio: max44000: correct value in illuminance_integration_time_available iio: adc: TI_AM335X_ADC should depend on HAS_DMA iio: bmi160: Fix time needed to sleep after command execution iio: 104-quad-8: Fix active level mismatch for the preset enable option iio: 104-quad-8: Fix off-by-one errors when addressing IOR iio: 104-quad-8: Fix index control configuration
2017-01-07tg3: Fix race condition in tg3_get_stats64().Michael Chan
The driver's ndo_get_stats64() method is not always called under RTNL. So it can race with driver close or ethtool reconfigurations. Fix the race condition by taking tp->lock spinlock in tg3_free_consistent() when freeing the tp->hw_stats memory block. tg3_get_stats64() is already taking tp->lock. Reported-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07be2net: fix unicast list fillingIvan Vecera
The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06be2net: fix accesses to unicast listIvan Vecera
Commit 988d44b "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 988d44b be2net: Avoid redundant addition of mac address in HW Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders that don't turn all the clks on and another fix for stm32f4 SoCs where we have multiple drivers attaching to the same DT node" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method clk: renesas: mstp: Support 8-bit registers for r7s72100
2017-01-06Merge tag 'hwmon-for-linus-v4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix temp1_max_alarm attribute in lm90 driver" * tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (lm90) fix temp1_max_alarm attribute
2017-01-06net: phy: dp83867: fix irq generationGrygorii Strashko
For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be programmed as an interrupt output instead of a Powerdown input in Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The current driver doesn't do this and as result IRQs will not be generated by DP83867 phy even if they are properly configured in DT. Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867 driver will work properly in interrupt enabled mode. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06amd-xgbe: Fix IRQ processing when running in single IRQ modeLendacky, Thomas
When running in single IRQ mode, the additional IRQ routines were being skipped because only the XGMAC interrupt status was being checked. Update the code so that the additional IRQ routines are checked whenever an interrupt is received. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06sh_eth: R8A7740 supports packet shecksummingSergei Shtylyov
The R8A7740 GEther controller supports the packet checksum offloading but the 'hw_crc' (bad name, I'll fix it) flag isn't set in the R8A7740 data, thus CSMR isn't cleared... Fixes: 73a0d907301e ("net: sh_eth: add support R8A7740") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06sh_eth: fix EESIPR values for SH77{34|63}Sergei Shtylyov
As the SH77{34|63} manuals are freely available, I've checked the EESIPR values written against the manuals, and they appeared to set the reserved bits 11-15 (which should be 0 on write). Fix those EESIPR values. Fixes: 380af9e390ec ("net: sh_eth: CPU dependency code collect to "struct sh_eth_cpu_data"") Fixes: f5d12767c8fd ("sh_eth: get SH77{34|63} support out of #ifdef") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06Merge tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Add mtty sample driver properly into build system (Alex Williamson) - Restore type1 mapping performance after mdev (Alex Williamson) - Fix mdev device race (Alex Williamson) - Cleanups to the mdev ABI used by vendor drivers (Alex Williamson) - Build fix for old compilers (Arnd Bergmann) - Fix sample driver error path (Dan Carpenter) - Handle pci_iomap() error (Arvind Yadav) - Fix mdev ioctl return type (Paul Gortmaker) * tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfio: vfio-mdev: fix non-standard ioctl return val causing i386 build fail vfio-pci: Handle error from pci_iomap vfio-mdev: fix some error codes in the sample code vfio-pci: use 32-bit comparisons for register address for gcc-4.5 vfio-mdev: Make mdev_device private and abstract interfaces vfio-mdev: Make mdev_parent private vfio-mdev: de-polute the namespace, rename parent_device & parent_ops vfio-mdev: Fix remove race vfio/type1: Restore mapping performance with mdev support vfio-mdev: Fix mtty sample driver building
2017-01-06Merge branch 'stable/for-linus-4.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fixes from Konrad Rzeszutek Wilk: "This has one fix to make i915 work when using Xen SWIOTLB, and a feature from Geert to aid in debugging of devices that can't do DMA outside the 32-bit address space. The feature from Geert is on top of v4.10 merge window commit (specifically you pulling my previous branch), as his changes were dependent on the Documentation/ movement patches. I figured it would just easier than me trying than to cherry-pick the Documentation patches to satisfy git. The patches have been soaking since 12/20, albeit I updated the last patch due to linux-next catching an compiler error and adding an Tested-and-Reported-by tag" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Export swiotlb_max_segment to users swiotlb: Add swiotlb=noforce debug option swiotlb: Convert swiotlb_force from int to enum x86, swiotlb: Simplify pci_swiotlb_detect_override()
2017-01-06Merge tag 'iommu-fixes-v4.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Three fixes queued up: - fix an issue with command buffer overflow handling in the AMD IOMMU driver - add an additional context entry flush to the Intel VT-d driver to make sure any old context entry from kdump copying is flushed out of the cache - correct the encoding of the PASID table size in the Intel VT-d driver" * tag 'iommu-fixes-v4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix the left value check of cmd buffer iommu/vt-d: Fix pasid table size encoding iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped
2017-01-06Merge tag 'acpi-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a device enumeration problem related to _ADR matching and an IOMMU initialization issue related to the DMAR table missing, remove an excessive function call from the core ACPI code, update an error message in the ACPI WDAT watchdog driver and add a way to work around problems with unhandled GPE notifications. Specifics: - Fix a device enumeration issue leading to incorrect associations between ACPI device objects and platform device objects representing physical devices if the given device object has both _ADR and _HID (Rafael Wysocki). - Avoid passing NULL to acpi_put_table() during IOMMU initialization which triggers a (rightful) warning from ACPICA (Rafael Wysocki). - Drop an excessive call to acpi_dma_deconfigure() from the core code that binds ACPI device objects to device objects representing physical devices (Lorenzo Pieralisi). - Update an error message in the ACPI WDAT watchdog driver to make it provide more useful information (Mika Westerberg). - Add a mechanism to work around issues with unhandled GPE notifications that occur during system initialization and cannot be prevented by means of sysfs (Lv Zheng)" * tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / DMAR: Avoid passing NULL to acpi_put_table() ACPI / scan: Prefer devices without _HID/_CID for _ADR matching ACPI / watchdog: Print out error number when device creation fails ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one()
2017-01-06Merge tag 'pm-4.10-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a few issues in the intel_pstate driver, a documetation issue, a false-positive compiler warning in the generic power domains framework and two problems in the devfreq subsystem. They also update the MAINTAINERS entry for devfreq and add a new "compatible" string to the generic cpufreq-dt driver. Specifics: - Fix a few intel_pstate driver issues: add missing locking it two places, avoid exposing a useless debugfs interface and keep the attribute values in sysfs in sync (Rafael Wysocki). - Drop confusing kernel-doc references related to power management and ACPI from the driver API manual (Rafael Wysocki). - Make a false-positive compiler warning in the generic power domains framework go away (Augusto Mecking Caringi). - Fix two initialization issues in the devfreq subsystem and update the MAINTAINERS entry for it (Chanwoo Choi). - Add a new "compatible" string for APM X-Gene 2 to the generic DT cpufreq driver (Hoan Tran)" * tag 'pm-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: dt: Add support for APM X-Gene 2 PM / devfreq: exynos-bus: Fix the wrong return value PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support PM / docs: Drop confusing kernel-doc references from infrastructure.rst PM / domains: Fix 'may be used uninitialized' build warning cpufreq: intel_pstate: Always keep all limits settings in sync cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy() cpufreq: intel_pstate: Use locking in intel_pstate_resume() cpufreq: intel_pstate: Do not expose PID parameters in passive mode
2017-01-06swiotlb: Export swiotlb_max_segment to usersKonrad Rzeszutek Wilk
So they can figure out what is the optimal number of pages that can be contingously stitched together without fear of bounce buffer. We also expose an mechanism for sub-users of SWIOTLB API, such as Xen-SWIOTLB to set the max segment value. And lastly if swiotlb=force is set (which mandates we bounce buffer everything) we set max_segment so at least we can bounce buffer one 4K page instead of a giant 512KB one for which we may not have space. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-and-Tested-by: Juergen Gross <jgross@suse.com>
2017-01-06Merge branches 'acpi-scan', 'acpi-sysfs', 'acpi-wdat' and 'acpi-tables'Rafael J. Wysocki
* acpi-scan: ACPI / scan: Prefer devices without _HID/_CID for _ADR matching ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one() * acpi-sysfs: ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding * acpi-wdat: ACPI / watchdog: Print out error number when device creation fails * acpi-tables: ACPI / DMAR: Avoid passing NULL to acpi_put_table()
2017-01-06Merge branches 'pm-domains', 'pm-docs' and 'pm-devfreq'Rafael J. Wysocki
* pm-domains: PM / domains: Fix 'may be used uninitialized' build warning * pm-docs: PM / docs: Drop confusing kernel-doc references from infrastructure.rst * pm-devfreq: PM / devfreq: exynos-bus: Fix the wrong return value PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support
2017-01-06Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: dt: Add support for APM X-Gene 2 cpufreq: intel_pstate: Always keep all limits settings in sync cpufreq: intel_pstate: Use locking in intel_cpufreq_verify_policy() cpufreq: intel_pstate: Use locking in intel_pstate_resume() cpufreq: intel_pstate: Do not expose PID parameters in passive mode
2017-01-05Merge tag 'platform-drivers-x86-v4.10-3' of ↵Linus Torvalds
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Just two small fixes for platform drivers x86: - use brightness_set_blocking for LED-setting callbacks on Fujitsu laptops - fix surface3_button build errors" * tag 'platform-drivers-x86-v4.10-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: fujitsu-laptop: use brightness_set_blocking for LED-setting callbacks platform/x86: fix surface3_button build errors
2017-01-05Merge tag 'drm-intel-fixes-2017-01-05' of ↵Linus Torvalds
git://anongit.freedesktop.org/git/drm-intel Pull i915 drm fixes from Jani Nikula: "Here's a bunch of drm/i915 fixes for v4.10-rc3. It includes GVT-g fixes. My new year's resolution is to start using signed tags for pulls. If that feels like a déjà vu, it's ((new year's) resolution), not (new (year's resolution))" [ Taking this directly from Jani because Dave Airlie is only partially connected right now. - Linus ] * tag 'drm-intel-fixes-2017-01-05' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Prevent timeline updates whilst performing reset drm/i915: Silence allocation failure during sg_trim() drm/i915: Don't clflush before release phys object drm/i915: Fix oops in overlay due to frontbuffer tracking drm/i915: Fix oopses in the overlay code due to i915_gem_active stuff drm/i915: Initialize overlay->last_flip properly drm/i915: Move the min_pixclk[] handling to the end of readout drm/i915: Force VDD off on the new power seqeuencer before starting to use it drm/i915/gvt: fix typo in cfg_space range check drm/i915/gvt: fix an issue in emulating cfg space PCI_COMMAND drm/i915/gvt/kvmgt: trival: code cleanup drm/i915/gvt/kvmgt: prevent double-release of vgpu drm/i915/gvt/kvmgt: check returned slot for gfn drm/i915/gvt/kvmgt: dereference the pointer within lock drm/i915/gvt: reset the GGTT entry when vGPU created drm/i915/gvt: fix an error in opregion handling
2017-01-05USB: fix problems with duplicate endpoint addressesAlan Stern
When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05Merge tag 'pinctrl-v4.10-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Three small pin control fixes for the v4.10 series. Very little to say about them, just driver fixes. - one fix to the AMD pinctrl ACPI glue - fix requests on the Meson driver - fix bitfield widths on Samsungs Exynos 5433" * tag 'pinctrl-v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433 pinctrl: meson: fix gpio request disabling other modes pinctrl/amd: Set the level based on ACPI tables
2017-01-05usb: ohci-at91: use descriptor-based gpio APIs correctlyPeter Rosin
The gpiod_get* function family does not want the -gpio suffix. Use devm_gpiod_get_index_optional instead of devm_gpiod_get_optional. The descriptor based APIs handle active high/low automatically. The vbus-gpios are output, request enable while getting the gpio. Don't try to get any vbus-gpios for ports outside num-ports. WTF? Big sigh. Fixes: 054d4b7b577d ("usb: ohci-at91: Use descriptor-based gpio APIs") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is a rather large set of bugfixes, as we just returned from the Christmas break. Most of these are relatively unimportant fixes for regressions introduced during the merge window, and about half of the changes are for mach-omap2. A couple of patches are just cleanups and dead code removal that I would not normally have considered for merging after -rc2, but I decided to take them along with the fixes this time. Notable fixes include: - removing the skeleton.dtsi include broke a number of machines, and we have to put empty /chosen nodes back to be able to pass kernel command lines as before - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as it had been for no good reason for a long time" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code drivers: psci: annotate timer on stack to silence odebug messages ARM64: defconfig: enable DRM_MESON as module ARM64: dts: meson-gx: Add Graphic Controller nodes ARM64: dts: meson-gxl: fix GPIO include ARM: dts: imx6: Disable "weim" node in the dtsi files ARM: dts: qcom: apq8064: Add missing scm clock ARM: davinci: da8xx: Fix sleeping function called from invalid context ARM: davinci: Make __clk_{enable,disable} functions public ARM: davinci: da850: don't add emac clock to lookup table twice ARM: davinci: da850: fix infinite loop in clk_set_rate() ARM: i.MX: remove map_io callback ARM: dts: vf610-zii-dev-rev-b: Add missing newline ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry ARM: dts: imx31: fix AVIC base address ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn arm64: dts: vexpress: Support GICC_DIR operations ARM: dts: vexpress: Support GICC_DIR operations firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares arm64: dts: msm8996: Add required memory carveouts ...
2017-01-05Merge tag 'for-linus-4.10-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes and cleanups from Juergen Gross: - small fixes for xenbus driver - one fix for xen dom0 boot on huge system - small cleanups * tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen: ARM: Zero reserved fields of xatp before making hypervisor call xen: events: Replace BUG() with BUG_ON() xen: remove stale xs_input_avail() from header xen: return xenstore command failures via response instead of rc xen: xenbus driver must not accept invalid transaction ids xen/evtchn: use rb_entry() xen/setup: Don't relocate p2m over existing one
2017-01-05usb: storage: unusual_uas: Add JMicron JMS56x to unusual deviceOliver Neukum
This device gives the following error on detection. xhci_hcd 0000:00:11.0: ERROR Transfer event for disabled endpoint or incorrect stream ring The same error is not seen when it is added to unusual_device list with US_FL_NO_REPORT_OPCODES passed. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Oliver Neukum <oneukun@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05usb: hub: Move hub_port_disable() to fix warning if PM is disabledGeert Uytterhoeven
If CONFIG_PM=n: drivers/usb/core/hub.c:107: warning: ‘hub_usb3_port_prepare_disable’ declared inline after being called drivers/usb/core/hub.c:107: warning: previous declaration of ‘hub_usb3_port_prepare_disable’ was here To fix this, move hub_port_disable() after hub_usb3_port_prepare_disable(), and adjust forward declarations. Fixes: 37be66767e3cae4f ("usb: hub: Fix auto-remount of safely removed or ejected USB-3 devices") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05usb: musb: blackfin: add bfin_fifo_offset in bfin_opsJérémy Lefaure
The function bfin_fifo_offset is defined but not used: drivers/usb/musb/blackfin.c:36:12: warning: ‘bfin_fifo_offset’ defined but not used [-Wunused-function] static u32 bfin_fifo_offset(u8 epnum) ^~~~~~~~~~~~~~~~ Adding bfin_fifo_offset to bfin_ops fixes this warning and allows musb core to call this function instead of default_fifo_offset. Fixes: cc92f6818f6e ("usb: musb: Populate new IO functions for blackfin") Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05usb: musb: fix compilation warning on unused functionJérémy Lefaure
The function musb_run_resume_work is called only when CONFIG_PM is enabled. So this function should not be defined when CONFIG_PM is disabled. Otherwise the compiler issues a warning: drivers/usb/musb/musb_core.c:2057:12: error: ‘musb_run_resume_work’ defined but not used [-Werror=unused-function] static int musb_run_resume_work(struct musb *musb) ^~~~~~~~~~~~~~~~~~~~ Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05usb: musb: Fix trying to free already-free IRQ 4Tony Lindgren
When unloading omap2430, we can get the following splat: WARNING: CPU: 1 PID: 295 at kernel/irq/manage.c:1478 __free_irq+0xa8/0x2c8 Trying to free already-free IRQ 4 ... [<c01a8b78>] (free_irq) from [<bf0aea84>] (musbhs_dma_controller_destroy+0x28/0xb0 [musb_hdrc]) [<bf0aea84>] (musbhs_dma_controller_destroy [musb_hdrc]) from [<bf09f88c>] (musb_remove+0xf0/0x12c [musb_hdrc]) [<bf09f88c>] (musb_remove [musb_hdrc]) from [<c056a384>] (platform_drv_remove+0x24/0x3c) ... This is because the irq number in use is 260 nowadays, and the dma controller is using u8 instead of int. Fixes: 6995eb68aab7 ("USB: musb: enable low level DMA operation for Blackfin") Signed-off-by: Tony Lindgren <tony@atomide.com> [b-liu@ti.com: added Fixes tag] Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05usb: musb: dsps: implement clear_ep_rxintr() callbackBin Liu
During dma teardown for dequque urb, if musb load is high, musb might generate bogus rx ep interrupt even when the rx fifo is flushed. In such case any of the follow log messages could happen. musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0 musb_host_rx 1936: RX3 dma busy, csr 2020 As mentioned in the current inline comment, clearing ep interrupt in the teardown path avoids the bogus interrupt, so implement clear_ep_rxintr() callback. This bug seems to be existing since the initial driver for musb support, but I only validated the fix back to v4.1, so only cc stable for v4.1+. cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05usb: musb: core: add clear_ep_rxintr() to musb_platform_opsBin Liu
During dma teardown for dequque urb, if musb load is high, musb might generate bogus rx ep interrupt even when the rx fifo is flushed. In such case any of the follow log messages could happen. musb_host_rx 1853: BOGUS RX2 ready, csr 0000, count 0 musb_host_rx 1936: RX3 dma busy, csr 2020 As mentioned in the current inline comment, clearing ep interrupt in the teardown path avoids the bogus interrupt. Clearing ep interrupt is platform dependent, so this patch adds a platform callback to allow glue driver to clear the ep interrupt. This bug seems to be existing since the initial driver for musb support, but I only validated the fix back to v4.1, so only cc stable for v4.1+. cc: stable@vger.kernel.org # 4.1+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-05Merge tag 'usb-serial-4.10-rc3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.10-rc3 These fixes address a number of long-standing issues in various USB-serial drivers which would lead to crashes should a malicious device lack the expected endpoints. Included are also a few related fixes, and a couple of unrelated ones that were found during my survey (e.g. a memleak and a sleep-while-atomic). A compiler warning revealed an error-handling issue in the new f81534 driver which is also fixed. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-01-05r8169: fix the typo in the commentZhu Yanjun
>From the realtek data sheet, the PID0 should be bit 0. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-05ACPI / DMAR: Avoid passing NULL to acpi_put_table()Rafael J. Wysocki
Linus reported that commit 174cc7187e6f "ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel" added a new warning on his desktop system: ACPI Warning: Table ffffffff9fe6c0a0, Validation count is zero before decrement which turns out to come from the acpi_put_table() in detect_intel_iommu(). This happens if the DMAR table is not present in which case NULL is passed to acpi_put_table() which doesn't check against that and attempts to handle it regardless. For this reason, check the pointer passed to acpi_put_table() before invoking it. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Fixes: 6b11d1d67713 ("ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-05cpufreq: dt: Add support for APM X-Gene 2Hoan Tran
Add the compatible string for supporting the generic device tree cpufreq-dt driver on APM's X-Gene 2 SoC. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) stmmac_drv_probe() can race with stmmac_open() because we register the netdevice too early. Fix from Florian Fainelli. 2) UFO handling in __ip6_append_data() and ip6_finish_output() use different tests for deciding whether a frame will be fragmented or not, put them in sync. Fix from Zheng Li. 3) The rtnetlink getstats handlers need to validate that the netlink request is large enough, fix from Mathias Krause. 4) Use after free in mlx4 driver, from Jack Morgenstein. 5) Fix setting of garbage UID value in sockets during setattr() calls, from Eric Biggers. 6) Packet drop_monitor doesn't format the netlink messages properly such that nlmsg_next fails to work, fix from Reiter Wolfgang. 7) Fix handling of wildcard addresses in l2tp lookups, from Guillaume Nault. 8) __skb_flow_dissect() can crash on pptp packets, from Ian Kumlien. 9) IGMP code doesn't reset group query timers properly, from Michal Tesar. 10) Fix overzealous MAIN/LOCAL route table combining in ipv4, from Alexander Duyck. 11) vxlan offload check needs to be more strict in be2net driver, from Sabrina Dubroca. 12) Moving l3mdev to packet hooks lost RX stat counters unintentionally, fix from David Ahern. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) sh_eth: enable RX descriptor word 0 shift on SH7734 sfc: don't report RX hash keys to ethtool when RSS wasn't enabled dpaa_eth: Initialize CGR structure before init dpaa_eth: cleanup after init_phy() failure net: systemport: Pad packet before inserting TSB net: systemport: Utilize skb_put_padto() LiquidIO VF: s/select/imply/ for PTP_1588_CLOCK libcxgb: fix error check for ip6_route_output() net: usb: asix_devices: add .reset_resume for USB PM net: vrf: Add missing Rx counters drop_monitor: consider inserted data in genlmsg_end benet: stricter vxlan offloading check in be_features_check ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules net: macb: Updated resource allocation function calls to new version of API. net: stmmac: dwmac-oxnas: use generic pm implementation net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaks net: stmmac: dwmac-oxnas: fix of-node leak Documentation/networking: fix typo in mpls-sysctl igmp: Make igmp group member RFC 3376 compliant flow_dissector: Update pptp handling to avoid null pointer deref. ...
2017-01-04sh_eth: enable RX descriptor word 0 shift on SH7734Sergei Shtylyov
The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25 (bits 0-15 usually used for that are occupied by the packet checksum). Thus we need to set the 'shift_rd0' field in the SH7734 SoC data... Fixes: f0e81fecd4f8 ("net: sh_eth: Add support SH7734") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04sfc: don't report RX hash keys to ethtool when RSS wasn't enabledEdward Cree
If we failed to set up RSS on EF10 (e.g. because firmware declared RX_RSS_LIMITED), ethtool --show-nfc $dev rx-flow-hash ... should report no fields, rather than confusingly reporting what fields we _would_ be hashing on if RSS was working. Fixes: dcb4123cbec0 ("sfc: disable RSS when unsupported") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: Initialize CGR structure before initRoy Pledge
The QBMan CGR options needs to be zeroed before calling the init function Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04dpaa_eth: cleanup after init_phy() failureMadalin Bucur
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-04net: systemport: Pad packet before inserting TSBFlorian Fainelli
Inserting the TSB means adding an extra 8 bytes in front the of packet that is going to be used as metadata information by the TDMA engine, but stripped off, so it does not really help with the packet padding. For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP) we can end-up padding them after the TSB insertion, thus making them 64 bytes, but with the TDMA stripping off the first 8 bytes, they could still be smaller than 64 bytes which is required to ingress the switch. Fix this by swapping the padding and TSB insertion, guaranteeing that the packets have the right sizes. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>