summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-04-26s390/qeth: extract helper to determine L2 cast typeJulian Wiedmann
This de-duplicates the L2 and L3 cast-type code, and makes the L2 code a bit more robust by removing the fragile assumption that skb->data always points to the Ethernet Header. This would break in code paths where we pushed the HW header onto the skb. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: cache max number of available buffer elementsJulian Wiedmann
The QETH_MAX_BUFFER_ELEMENTS() macro effectively returns a constant value. To avoid some redundant pointer chasing and computations in the xmit hot path, cache this value in the queue struct. Take this as opportunity to shrink some of the queue struct's fields to their appropriate value range, slightly reducing its total size. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: don't clear Output buffers on every queue initJulian Wiedmann
On the first initialization of a queue, its Output Buffers are in a clean state with no attached resources. On every subsequent initialization, qeth_l?_stop_card() has previously put them in a clean state via qeth_drain_output_queues(). So the call to qeth_clear_output_buffer() is redundant and can be removed. While at it, move the initialization of the queue's card pointer into the queue allocation. It never changes afterwards. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: use IS_* helpers for checking device typeJulian Wiedmann
We have helper macros for all possible device types, replace all remaining open-coded accesses to the type fields. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: clean up stale buffer state documentationJulian Wiedmann
We don't keep track of Input Buffer states, so remove the comments that make it sound like the qeth_qdio_buffer_states enum applies to Input Buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: remove RX seqno in skb->cbJulian Wiedmann
It's unclear what exact purpose this seqno may have served in the past. But it's certainly no longer used anymore, as the following napi_gro_receive() will straight away clear this part of the cb again. Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390: qeth: address type mismatch warningArnd Bergmann
clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26mac80211_hwsim: Extended Key ID supportAlexander Wetzel
Allow Extended Key ID to be used with hwsim. Hwsim can only communicate with other hwsim cards, allowing it to bypass creation of A-MPDUs in the first place. Mixing keyIDs in an A-MPDU is therefore impossible and can never cause interoperability issues with other cards. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> [reword comment slightly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26mac80211_hwsim: set p2p device interface support indicationAvraham Stern
P2P device interface type was not indicated in the supported interface types even when hwsim was configured with p2p device support. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-04-26netdevsim: implement ndo_get_devlink_portJiri Pirko
Implement ndo_get_devlink_port and allow switch_id and port_name to be handled by devlink. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: move netdev creation/destruction to dev probeJiri Pirko
Remove the existing way to create netdevsim over rtnetlink and move the netdev creation/destruction to dev probe, so for every probed port, a netdevsim-netdev instance is created. Adjust selftests to work with new interface. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: extend device attrs to support port addition and deletionJiri Pirko
In order to test flows in core, it is beneficial to maintain previously supported possibility to add and delete ports during netdevsim lifetime. Do it by extending device sysfs attrs by "new_port" and "del_port". Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: implement dev probe/remove skeleton with port initializationJiri Pirko
Implement netdevsim bus probing of netdevsim devices. For every probed device create a devlink instance. According to the user-passed value, create a number of ports represented by devlink port instances. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: change debugfs tree topologyJiri Pirko
With the model where dev is represented by devlink and ports are represented by devlink ports, make debugfs file names independent on netdev names. Change the topology to the one illustrated by the following example: $ ls /sys/kernel/debug/netdevsim/ netdevsim1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ bpf_bind_accept bpf_bind_verifier_delay bpf_bound_progs ports $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/ 0 1 $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/ bpf_map_accept bpf_offloaded_id bpf_tc_accept bpf_tc_non_bound_accept bpf_xdpdrv_accept bpf_xdpoffload_accept dev ipsec $ ls /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -l lrwxrwxrwx 1 root root 0 Apr 13 15:58 /sys/kernel/debug/netdevsim/netdevsim1/ports/0/dev -> ../../../netdevsim1 Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: generate random switch id instead of using dev idJiri Pirko
Current implementation of parent_id/switch_id does not follow the original idea of being unique. The values are "0", "1", etc. Instead of that, generate 32 random bytes. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: merge sdev into devJiri Pirko
As previously introduce dev which is mapped 1:1 to a bus device covers the purpose of the original shared device, merge the sdev code into dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: rename dev_init/exit() functions and make them independent on nsJiri Pirko
These functions are going to be called from bus probe/release(), therefore make them independent on ns struct and rename accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: add bus attributes to add new and delete devicesJiri Pirko
Add a way to add new netdevsim device on netdevsim bus and also to delete existing netdevsim device from the bus. Track the bus devices in using a list. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: use ida for bus device idsJiri Pirko
Instead of increments of u32 value, use ida to manage bus device ids. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: add stub netdevsim driver implementationJiri Pirko
In order to bus probing to work correctly, register a simple netdevsim driver implementation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: move device registration and related code to bus.cJiri Pirko
Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: put netdevsim bus code into separate fileJiri Pirko
As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: rename devlink.c to dev.c to contain per-dev(asic) itemsJiri Pirko
The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: create devlink instance per netdevsim instanceJiri Pirko
Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26netdevsim: move device registration on bus to be done earlier in initJiri Pirko
As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-04-25 Here's the main bluetooth-next pull request for the 5.2 kernel. - Added support for Mediatek SDIO controllers - Added support for Broadcom BCM2076B1 UART controller - Added support for Marvel SD8987 chipset - Fix buffer overflow bug in hidp protocol - Various other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ...
2019-04-24net: mvneta: Switch to using devm_alloc_etherdev_mqsRosen Penev
It allows some of the code to be simplified. Tested on Turris Omnia. Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24net: vrf: Fix operation not supported when set vrf macMiaohe Lin
Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by: Hui Wang <wanghui104@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23Merge tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm regression fixes from Dave Airlie: "We interrupt your regularly scheduled drm fixes for a regression special. The first is for a fix in i915 that had unexpected side effects fallout in the userspace X.org modesetting driver where X would no longer start. I got tired of the nitpicking and issued a large hammer on it. The X.org driver is buggy, but blackscreen regressions are worse. The second was an oversight that myself and Gerd should have noticed better, Gerd is trying to fix this properly, but the regression is too large to leave, even if the original behaviour is bad in some cases, it's clearly bad to break a bunch of working use cases. I'll likely have a regular fixes pull later, but I really wanted to highlight these" * tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm: Revert "drm/virtio: drop prime import/export callbacks" Revert "drm/i915/fbdev: Actually configure untiled displays"
2019-04-23mlxsw: spectrum_router: Prevent ipv6 gateway with v4 route via replace and ↵David Ahern
append mlxsw currently does not support v6 gateways with v4 routes. Commit 19a9d136f198 ("ipv4: Flag fib_info with a fib_nh using IPv6 gateway") prevents a route from being added, but nothing stops the replace or append. Add a catch for them too. $ ip ro add 172.16.2.0/24 via 10.99.1.2 $ ip ro replace 172.16.2.0/24 via inet6 fe80::202:ff:fe00:b dev swp1s0 Error: mlxsw_spectrum: IPv6 gateway with IPv4 route is not supported. $ ip ro append 172.16.2.0/24 via inet6 fe80::202:ff:fe00:b dev swp1s0 Error: mlxsw_spectrum: IPv6 gateway with IPv4 route is not supported. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: socionext: replace napi_alloc_frag with the netdev variant on initIlias Apalodimas
The netdev variant is usable on any context since it disables interrupts. The napi variant of the call should only be used within softirq context. Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag call Changes since v1: - Adjusted commit message Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Fixes: 4acb20b46214 ("net: socionext: different approach on DMA") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: atheros: fix spelling mistake "underun" -> "underrun"Colin Ian King
There are spelling mistakes in structure elements, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ravb: Avoid unsupported internal delay mode for R-Car E3/D3Simon Horman
According to the R-Car Gen3 Hardware Manual Rev 1.50 of Nov 30, 2018, the TX clock internal delay mode isn't supported on R-Car E3 (r8a77990) or D3 (r8a77995). And by extension it is also not supported by RZ/G2E (r9a774c0). This matches all ES versions of the affected SoCs as it is not clear if this problem will be resolved in newer chips. This can be revisited, as necessary. This patch does not error-out if PHY_INTERFACE_MODE_RGMII_ID or PHY_INTERFACE_MODE_RGMII_TXID are used on SoCs where TX clock delay mode is not supported as there is a risk of introducing a regression when used in conjunction with older DT blobs present in the field. Rather, a warning is logged in such cases. Based on work by Kazuya Mizuguchi. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23isdn:mISDN: fix misuse of %x in hfcpci.cFuqian Huang
Pointers should be printed with %p or %px rather than cast to (u_long) and printed with %lx. Change %lx to %p to print the pointer. Change %lx to %pad to print the dma_addr_t. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23isdn: hisax: Fix misuse of %x in config.cFuqian Huang
Pointers should be printed with %p or %px rather than cast to (u_long) type and printed with %lX. As the function seems to be for debug purpose. Change %lX to %px to print the pointer value. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-24Revert "drm/virtio: drop prime import/export callbacks"Dave Airlie
This patch does more harm than good, as it breaks both Xwayland and gnome-shell with X11. Xwayland requires DRI3 & DRI3 requires PRIME. X11 crash for obscure double-free reason which are hard to debug (starting X11 by hand doesn't trigger the crash). I don't see an apparent problem implementing those stub prime functions, they may return an error at run-time, and it seems to be handled fine by GNOME at least. This reverts commit b318e3ff7ca065d6b107e424c85a63d7a6798a69. [airlied: This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2. This brings back the original problem, but it's better than regressions.] Fixes: b318e3ff7ca065d6b107e424c85a63d7a6798a ("drm/virtio: drop prime import/export callbacks") Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2019-04-24Revert "drm/i915/fbdev: Actually configure untiled displays"Dave Airlie
This reverts commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5. This commit is documented to break userspace X.org modesetting driver in certain configurations. The X.org modesetting userspace driver is broken. No fixes are available yet. In order for this patch to be applied it either needs a config option or a workaround developed. This has been reported a few times, saying it's a userspace problem is clearly against the regression rules. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109806 Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: <stable@vger.kernel.org> # v3.19+
2019-04-23Merge tag 'mlx5-updates-2019-04-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2019-04-22 This series includes updates to mlx5e driver RX data path and some significant XDP RX/TX improvements to overcome/mitigate HW and PCIE bottlenecks. From Tariq: 1) Some Enhancements in rq->flags 2) Stabilize RX packet rate (on Striding RQ) with multiple outstanding UMR posts In this patch, we add support for multiple outstanding UMR posts, to allow faster gap closure between consuming MPWQEs and reposting them back into the WQ. Performance test: As expected, huge improvement in large-scale (48 cores). xdp_redirect_map, 64B UDP multi-stream. Redirect from ConnectX-5 100Gbps to ConnectX-6 100Gbps. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz. Before: Unstable, 7 to 30 Mpps After: Stable, at 70.5 Mpps From Shay: 3) XDP, Inline small packets into the TX MPWQE in XDP xmit flow Upon high packet rate with multiple CPUs TX workloads, much of the HCA's resources are spent on prefetching TX descriptors, thus affecting transmission rates. This patch comes to mitigate this problem by moving some workload to the CPU and reducing the HW data prefetch overhead for small packets (<= 256B). When forwarding packets with XDP, a packet that is smaller than a certain size (set to ~256 bytes) would be sent inline within its WQE TX descrptor (mem-copied), when the hardware tx queue is congested beyond a pre-defined water-mark. Performance: Tested packet rate for UDP 64Byte multi-stream over two dual port ConnectX-5 100Gbps NICs. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz * Tested with hyper-threading disabled XDP_TX: | | before | after | | | 24 rings | 51Mpps | 116Mpps | +126% | | 1 ring | 12Mpps | 12Mpps | same | XDP_REDIRECT: ** Below is the transmit rate, not the redirection rate which might be larger, and is not affected by this patch. | | before | after | | | 32 rings | 64Mpps | 92Mpps | +43% | | 1 ring | 6.4Mpps | 6.4Mpps | same | As we can see, feature significantly improves scaling, without hurting single ring performance. From Maxim: 4) Some trivial refactoring and code improvements prior to a larger series to support AF_XDP. ==================== Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23Bluetooth: hci_qca: Fix crash with non-serdev devicesMatthias Kaehlcke
qca_set_baudrate() calls serdev_device_wait_until_sent() assuming that the HCI is always associated with a serdev device. This isn't true for ROME controllers instantiated through ldisc, where the call causes a crash due to a NULL pointer dereferentiation. Only call the function when we have a serdev device. The timeout for ROME devices at the end of qca_set_baudrate() is long enough to be reasonably sure that the command was sent. Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reported-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Rocky Liao <rjliao@codeaurora.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23net/mlx5e: Use #define for the WQE wait timeout constantMaxim Mikityanskiy
Create a #define for the timeout of mlx5e_wait_for_min_rx_wqes to clarify the meaning of a magic number. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Remove unused rx_page_reuse statMaxim Mikityanskiy
Remove the no longer used page_reuse stat of RQs. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Take HW interrupt trigger into a functionMaxim Mikityanskiy
mlx5e_trigger_irq posts a NOP to the ICO SQ just to trigger an IRQ and enter the NAPI poll on the right CPU according to the affinity. Use it in mlx5e_activate_rq. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Remove unused parameterMaxim Mikityanskiy
mdev is unused in mlx5e_rx_is_linear_skb. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Add an underflow warning commentMaxim Mikityanskiy
mlx5e_mpwqe_get_log_rq_size calculates the number of WQEs (N) based on the requested number of frames in the RQ (F) and the number of packets per WQE (P). It ensures that N is not less than the minimum number of WQEs in an RQ (N_min). Arithmetically, it means that F / P >= N_min should be true. This function deals with logarithms, so it should check that log(F) - log(P) >= log(N_min). However, if F < P, this expression will cause an unsigned underflow. Check log(F) >= log(P) + log(N_min) instead. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Move parameter calculation functions to en/params.cMaxim Mikityanskiy
This commit moves the parameter calculation functions to a separate file for better modularity and code sharing with future features. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Report mlx5e_xdp_set errorsMaxim Mikityanskiy
If the channels fail to reopen after setting an XDP program, return the error code instead of 0. A proper fix is still needed, as now any error while reopening the channels brings the interface down. This patch only adds error reporting. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: Remove unused parameterMaxim Mikityanskiy
params is unused in mlx5e_init_di_list. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-04-23net/mlx5e: XDP, Inline small packets into the TX MPWQE in XDP xmit flowShay Agroskin
Upon high packet rate with multiple CPUs TX workloads, much of the HCA's resources are spent on prefetching TX descriptors, thus affecting transmission rates. This patch comes to mitigate this problem by moving some workload to the CPU and reducing the HW data prefetch overhead for small packets (<= 256B). When forwarding packets with XDP, a packet that is smaller than a certain size (set to ~256 bytes) would be sent inline within its WQE TX descrptor (mem-copied), when the hardware tx queue is congested beyond a pre-defined water-mark. This is added to better utilize the HW resources (which now makes one less packet data prefetch) and allow better scalability, on the account of CPU usage (which now 'memcpy's the packet into the WQE). To load balance between HW and CPU and get max packet rate, we use watermarks to detect how much the HW is congested and move the work loads back and forth between HW and CPU. Performance: Tested packet rate for UDP 64Byte multi-stream over two dual port ConnectX-5 100Gbps NICs. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz * Tested with hyper-threading disabled XDP_TX: | | before | after | | | 24 rings | 51Mpps | 116Mpps | +126% | | 1 ring | 12Mpps | 12Mpps | same | XDP_REDIRECT: ** Below is the transmit rate, not the redirection rate which might be larger, and is not affected by this patch. | | before | after | | | 32 rings | 64Mpps | 92Mpps | +43% | | 1 ring | 6.4Mpps | 6.4Mpps | same | As we can see, feature significantly improves scaling, without hurting single ring performance. Signed-off-by: Shay Agroskin <shayag@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-07-18 11:21:02 +0000