summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2007-03-26ide: fix locking for manual DMA enable/disable ("hdparm -d")Bartlomiej Zolnierkiewicz
Since hwif->ide_dma_check and hwif->ide_dma_on never queue any commands (ide_config_drive_speed() sets transfer mode using polling and has no error recovery) we are safe with setting hwgroup->busy for the time while DMA setting for a drive is changed (so it won't race against I/O commands in fly). I audited briefly all ->ide_dma_check/->ide_dma_on/->tuneproc/->speedproc implementations and they all look OK wrt to this change. This patch finally allowed me to close kernel bugzilla bug #8169 (once again thanks to Patrick Horn for reporting the issue & testing patches). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-26ide: revert "ide: fix drive side 80c cable check, take 2" for nowBartlomiej Zolnierkiewicz
"ide: fix drive side 80c cable check, take 2" patch from Tejun Heo (commit fab59375b9543f84d1714f7dd00f5d11e531bd3e) fixed 80c bit test (bit13 of word93) but we also need to fix master/slave IDENTIFY order (slave device should be probed first in order to make it release PDIAG- signal) and we should also check for pre-ATA3 slave devices (which may not release PDIAG- signal). [ Unfortunately the fact that IDE driver doesn't reset devices itself helps only a bit as it seems that some BIOS-es reset ATA devices after programming the chipset, some BIOS-es can be set to not probe/configure selected devices, there may be no BIOS in case of add-on cards etc. ] Since we are quite late in the release cycle and the required changes will affect a lot of systems just revert the fix for now. [ Please also see libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. ] Thanks goes out to Fernando Mitio Yamada for reporting the problem and patiently testing patches. Acked-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-24[PATCH] cx88-dvb: fix nxt200x rf input switchingMichael Krufky
After dvb tuner refactoring, the pllbuff has been altered such that the pll address is now stored in buf[0]. Instead of sending buf to set_pll_input, we should send buf+1. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Ivan Andrewjeski <ivan@fiero-gt.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-24[MIPS] SB1250: Fix bugs/warnings by creative use of volatile.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: fix oops on "modprobe -r ohci1394" after network class_device conversion
2007-03-23Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [netdrvr] ewrk3: correct card detection bug cxgb3 - fix white spaces in drivers/net/Kconfig myri10ge: update driver version to 1.3.0-1.226 myri10ge: fix management of >4kB allocated pages myri10ge: update wcfifo and intr_coal_delay default values myri10ge: Serverworks HT2100 provides aligned PCIe completion mv643xx_eth: add mv643xx_eth_shutdown function SAA9730: Fix large pile of warnings Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full" cxgb3 - T3B2 pcie config space cxgb3 - Fix potential MAC hang cxgb3 - Auto-load FW if mismatch detected cxgb3 - fix ethtool cmd on multiple queues port Fix return code in pci-skeleton.c skge: use per-port phy locking skge: mask irqs when device down skge: deadlock on tx timeout [PATCH] airo: Fix an error path memory leak [PATCH] bcm43xx: MANUALWLAN fixes
2007-03-23[PATCH] rivafb: fix initial brightnessGuido Guenther
This is the rivafb equivalent of 238576e12fef1d52751c6e08db2d0bdb0e248caf. It fixes rivafb having a default backlight brightness of 0 (no picture at all) on a PBook 6,1. Signed-off-by: Guido Guenther <agx@sigxcpu.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23[PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.cDanny Kukawka
Adds device ids of two Fujitsu Siemens Tablet PCs to pnp_dev_table Signed-off-by: Danny Kukawka <dkukawka@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23[PATCH] i386: add command line option "local_apic_timer_c2_ok"Thomas Gleixner
It turned out that it is almost impossible to trust ACPI, BIOS & Co. regarding the C states. This was the reason to switch the local apic timer off in C2 state already. OTOH there are sane and well behaving systems, which get punished by that decision. Allow the user to confirm that the local apic timer is trustworthy in C2 state. This keeps the default behaviour on the safe side. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23Revert "ACPI: Only use IPI on known broken machines (AMD, ↵Linus Torvalds
Dothan/BaniasPentium M)" This reverts commit 25496caec111481161e7f06bbfa12a533c43cc6f, which broke bootup on at least Ingo's ThinkPad T60. Need to figure out exactly what is wrong before we can re-do the logic. Requested-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-23ieee1394: fix oops on "modprobe -r ohci1394" after network class_device ↵Stefan Richter
conversion The networking subsystem has been converted from class_device to device but ieee1394 hasn't. This results in a 100% reproducible NULL pointer dereference if the ohci1394 driver module is unloaded while the eth1394 module is still loaded. http://lkml.org/lkml/2006/11/16/147 http://lkml.org/lkml/2007/3/14/4 This is a regression in 2.6.21-rc1. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: Ismail Dönmez <ismail@pardus.org.tr>
2007-03-23[netdrvr] ewrk3: correct card detection bugJeff Garzik
Arwin Vosselman pointed out: > The ewrk3-driver doesn't function with 2.6.16-kernels (used 2.6.16.41 for > my tests). Cards will never be detected due to this bug. > > drivers/net/ewrks3.c: > Line 417 reads: > > if (nicsr == (CSR_TXD | CSR_RXD)) > > that should be: > > if (nicsr != (CSR_TXD | CSR_RXD)) > > Comparison with the same line in v2.4 shows why: > > 2.4: > if (nicsr == (CSR_TXD | CSR_RXD)){ > > blah, blah > ========== > 2.6: > if (nicsr == (CSR_TXD | CSR_RXD)) > return -ENXIO; > > blah, blah > ========== > > blah,blah will not, but should, be executed in 2.6 with a card being present. > > The fix mentioned above solves this bug. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp
2007-03-23cxgb3 - fix white spaces in drivers/net/KconfigDivy Le Ray
Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: update driver version to 1.3.0-1.226Brice Goglin
Driver version is now 1.3.0-1.226. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: fix management of >4kB allocated pagesBrice Goglin
Fix management of allocated physical pages when the architecture page size is not 4kB since the firmware cannot cross 4K boundary. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: update wcfifo and intr_coal_delay default valuesBrice Goglin
Update the default value of 2 module parameters: * wcfifo disabled * intr_coal_delay 75us Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: Serverworks HT2100 provides aligned PCIe completionBrice Goglin
[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion Use the regular firmware on Serverworks HT2100 PCIe ports since this chipset provides aligned PCIe completion. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23mv643xx_eth: add mv643xx_eth_shutdown functionDale Farnsworth
mv643xx_eth_shutdown is needed for kexec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23SAA9730: Fix large pile of warningsRalf Baechle
The SAA9730 driver doesn't quite grok what the difference between an ioport and memory mapped I/O is. It just happened to work on the one Linux system the SAA9730 happens to spend it's misserable existence on. drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int': drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int': drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int': drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int': drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int': drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'show_saa9730_regs': drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers': drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_cam_load': drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_mii_init': drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_control_init': drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_stop': drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_dma_init': drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_start': drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_tx': drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_rx': drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_write': drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast': drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast Fixed by using writel instead of outl. 42 warnings less. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full"Li Yang
This reverts commit 18babd38547a042a4bfd4154a014d1ad33373eb0. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - T3B2 pcie config spaceDivy Le Ray
T3B2 does not lose its pcie config space on reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Fix potential MAC hangDivy Le Ray
Under rare conditions, the MAC might hang while generating a pause frame. This patch fine tunes the MAC settings to avoid the issue, allows for periodic MAC state check, and triggers a recovery if hung. Also fix one MAC statistics counter for the rev board T3B2. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Auto-load FW if mismatch detectedDivy Le Ray
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - fix ethtool cmd on multiple queues portDivy Le Ray
Limit ethtool -g/-G to the given port's queues. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Fix return code in pci-skeleton.cAnton Blanchard
We assign the return value of register_netdev to i, but return rc later on. Fix it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: use per-port phy lockingStephen Hemminger
Rather than a workqueue and a per-board mutex to control PHY, use a tasklet and spinlock. Tasklet is lower overhead and works just as well for this. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: mask irqs when device downStephen Hemminger
Wheen a port on the skge driver is not used, it should mask off interrupts from theat port. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: deadlock on tx timeoutStephen Hemminger
The skge driver will deadlock if gets a transmit timeout because the netif_tx_lock() is already held. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-22Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: IA64: fix %ll build warnings ACPI: IA64: fix allnoconfig build ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M) ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2) ACPI: parse 2nd MADT by default ACPICA: revert "acpi_serialize" changes sony-laptop: MAINTAINERS fix entry, add L: and W: ACPI: resolve HP nx6125 S3 immediate wakeup regression ACPI: Add support to parse 2nd MADT
2007-03-22[PATCH] drivers/video/s3fb.c: fix a use-before-checkAdrian Bunk
NULL checks should be before the first dereference. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Ondrej Zajicek <santiago@crfreenet.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-22Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c/ds1374: Check workqueue creation status i2c-i801: Restore the device state before leaving i2c-amd8111: Missed cleanup
2007-03-22Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed [NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT [NET]: fix up misplaced inlines. [SCTP]: Correctly reset ssthresh when restarting association [BRIDGE]: Fix fdb RCU race [NET]: Fix fib_rules dump race [XFRM]: ipsecv6 needs a space when printing audit record. [X25] x25_forward_call(): fix NULL dereferences [SCTP]: Reset some transport and association variables on restart [SCTP]: Increment error counters on user requested HBs. [SCTP]: Clean up stale data during association restart [IrDA]: Calling ppp_unregister_channel() from process context [IrDA]: irttp_dup spin_lock initialisation [IrDA]: Delay needed when uploading firmware chunks
2007-03-22IB/ipoib: Fix thinko in packet length checksMichael S. Tsirkin
The packet length checks in ipoib are broken: we add 4 bytes (IPoIB encapsulation header) when sending a packet, not 20 bytes (hardware address length) to each packet. Therefore, if connected mode is enabled so that the interface MTU is larger than the multicast MTU, IPoIB may end up trying to send too-long multicast packets. For example, multicast is broken if a message of size 2048 bytes is sent on an interface with UD MTU 2048, because 2048 is bigger than the real limit of 2044 but the code tests against the wrong limit of 2060. This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>, submitted by Scott Weitzenkamp <sweitzen@cisco.com>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB: Fix use-after-free in path_rec_completion()Michael S. Tsirkin
The connected mode code added the possibility that an neigh struct gets freed in the list_for_each_entry() loop in path_rec_completion(), which causes a use-after-free. Fix this by changing to the _safe variant of the list walking macro. This was spotted by the Coverity checker (CID 1567). Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IB/ehca: Make scaling code work without CPU hotplugJoachim Fenkes
eHCA scaling code must not depend on register_cpu_notifier() if CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()Steve Wise
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IB/ipath: Check return value of lookup_one_lenBryan O'Sullivan
This fixes kernel.org bug 8003. Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB: Fix race in detaching from mcast group before attachingSean Hefty
There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish() where we can try to detach from a multicast group before we've attached to it. Fix this by reordering the code in ipoib_mcast_leave to free the multicast group first, which waits for the multicast callback thread (which calls ipoib_mcast_join_finish()) to complete before detaching from the group. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22IPoIB/cm: Fix reaping of stale connectionsMichael S. Tsirkin
The sense of the time_after_eq() test in ipoib_cm_stale_task() is reversed so that only non-stale connections are reaped. Fix this by changing to time_before_eq(). Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-22i2c/ds1374: Check workqueue creation statusCyrill V. Gorcunov
Check if workqueue creation failed. Further usage of NULL pointed workqueue is not good I guess ;) Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-03-22i2c-i801: Restore the device state before leavingJean Delvare
Restore the original host configuration on driver unload and on suspend. In particular this returns the SMBus master in I2C mode if it was originally in I2C mode, which should help with suspend/resume if the BIOS expects to find the SMBus master in I2C mode. This fixes bug #6449 (for real this time.) http://bugzilla.kernel.org/show_bug.cgi?id=6449 Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Tommi Kyntola <tommi.kyntola@ray.fi>
2007-03-22i2c-amd8111: Missed cleanupJean Delvare
I missed one cleanup in my previous patch. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-03-20Pull c2 into release branchLen Brown
2007-03-20Pull bugzilla-7465 into release branchLen Brown
2007-03-20Pull bugzilla-8171 into release branchLen Brown
2007-03-20Pull misc-for-upstream into release branchLen Brown
2007-03-20[IrDA]: Delay needed when uploading firmware chunksNigel Williams
With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks upload on irda-usb. Patch from Nigel Williams <nigelw@elder-gods.net> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-19Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: new Novatel device ids for option driver USB: berry_charge: correct dbg string for second magic command usblp: quirk flag and device entry for Seiko Epson M129C printer airprime: USB ID for Novatel EV620 mini PCI-E card USB: necessary update for mos7720 driver USB: RAZR v3i unusual_devs USB: two more device ids for dm9601 usbnet driver USB: fix usb-serial regression
2007-03-19Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_ixp4xx_cf: fix interrupt pata_ixp4xx_cf: fix oops on detach libata: kernel-doc fix sata_inic162x: kill double region requests drivers/ata/Kconfig: PATA_SCC depends on wrong platform sata_sil24: Add Adaptec 1220SA PCI ID libata: don't whine if ->prereset() returns -ENOENT
generated by cgit v1.2.3-70-g09d2 (git 2.47.1) at 2024-12-29 16:56:26 +0000